We charge any iPhone model without a standard charger. How to charge your phone from a computer, in a car or on a train. Outdoor battery charging stations

We have all encountered a situation where the charge of a smartphone begins to decrease right before our eyes. Many will decide that it’s time to change the battery, and some will think about the reasons fast discharge batteries. And the latter will be right, since knowledge about correct operation batteries will extend the battery life for years.

How to properly charge Apple devices

It would seem that everything is simple - you insert the cable charger into the gadget and into the power grid, and electricity will do the rest of the work. However, this is misleading and recharging your device in this way can harm the battery.

Manufacturers and specialists, through research, trial and error, have created a number of recommended operating rules iPhone batteries, iPad and iPod. This also applies to other devices whose batteries are based on lithium-ion.

1. Carry out a full discharge-charge cycle of your phone no more than once a month. To do this, you need to completely deplete the battery reserves, then start the charging process, and, without turning on the device, bring the charge level to 100%.
2. Charge your phone as often as possible. The recommended battery level should be kept between 40–80%. Frequent charging- this is the movement of electrons inside the battery and the absence of the possibility of rendering energy-intensive elements unusable.
3. Do not bring the battery charge to 100% (except for the cases described in the first paragraph). Your device runs on battery power, not mains power. Upon reaching maximum charge the battery continues to be used, and this leads to its discharge by 1% or less, which starts the charging process again. Such microscopic charging of the battery harms it, so it is not recommended to leave your device to recharge all night or all day.
4. Observe temperature regime, especially while charging the phone. Increasing and cooling temperatures lead to physical deformation of battery cells. Optimal temperature For active use and charging gadgets fluctuates in the range of 20–24°C.

Is it possible to charge an iPhone using an iPad charger?

There is no prohibition against using “foreign” charger cables to power your iPhone. But it is worth remembering that the plug must fit the phone connector. For example, it is highly not recommended to try to charge an iPhone using a charging cable from a thin Nokia and other plugs that are not suitable for this purpose. You also need an operating voltage of 5V, but this is the international standard.

The output charging voltage for iPhone, iPod and iPad is the same and equal to the operating voltage USB port- +5V. What is written on the charger is the maximum current it can produce. But that doesn't mean she always gives him away. Any Apple device has special processor charge, which optimally selects the current to charge the battery. He also limits charging current on a certain maximum level if the battery is very discharged. The only difference is that the iPad's battery is larger than the iPhone's and therefore, to reduce charging time, the iPad's maximum charging current is 2A instead of the iPhone's 1A. Naturally, the charger must provide given current. That's why it's more powerful on the iPad. As a result, the iPhone can be safely charged by charging from the iPad, since the charging current Iphone smaller than the charger can produce. By the way, charge it the other way around iPad charging From an Iphone it’s also possible, it’s just that the charge will be 2 times slower, since charging the Iphone cannot produce the required 2A.

https://uip.me/forum/index.php?showtopic=12653

How to charge your phone from a computer, in a car or on a train

The charger is divided into two parts: a power supply and a cable with a USB connector. As a result, anything that has a USB input and is connected to a power source can charge your device.

The most simple example are computers and laptops. You need to connect the devices using charging cable and wait for the required charge level. It is important to remember that a laptop that is turned off or in sleep mode will not charge the smartphone. Although for sleep mode this function can be disabled:

1. Click right click mouse over the “Computer” icon and select “Management” from the drop-down menu. Through the context menu of the “Computer” icon, go to “Management”
2. In the left column, click on “Device Manager”.
3. Open the tab " USB controllers».
   In Device Manager, find "USB Controllers"
4. Double-click with the left mouse button to open the properties of each item called “USB Root Hub”. Double click Left-click to open the properties of “USB Root Hub”
5. Go to the “Power Management” tab and uncheck the “Allow the computer to turn off this device to save energy” checkbox. And confirm the change with the “OK” button. Uncheck "Allow the computer to turn off this device to save energy" and save the changes

Now your laptop will charge smartphones and tablets even in sleep mode.

When it comes to cars, not many of them have direct facilities for charging your phones. But almost all of them have cigarette lighters, which means that with the help of a simple device called a “bullet,” you can connect the phone to a power source.

Using a cigarette lighter adapter, you can charge your smartphone in the car.

Possibility of use electrical network fully implemented on trains. Each carriage, be it a reserved seat, a compartment or a SV, has the most ordinary sockets. Of course, their voltage varies within a certain range, and this affects the charging speed of the gadget. The main thing is that you only need a cable and network adapter to start charging the device's battery.

With help standard set To charge, you can recharge your phone on the train

How to use wireless charging

Not the best new technology, which only recently found application in the charging system for portable devices. If we omit the unclear terminology, wireless phone charging is based on the principle of inductance.

The wireless charger consists of two parts:

As a result, we get a phone case with which a magnetic pad can charge the device.

The advantages of this type of charging include the fact that the absence of a cable eliminates all the risks associated with its use, be it loosening of the socket or electric shock due to poor insulation. Among the disadvantages is the small range of action of such a device: the phone can be moved and rotated on the surface, but it cannot be torn off by more than a few millimeters.

Video: how to use wireless charging for iPhone

How to use a universal charger

"Frog" is a universal battery charger. With its help you can charge absolutely any battery. mobile phone or tablet.

Using a universal charger you can charge any smartphone battery

Every year, this charging method is used less and less due to the availability of older models of mobile phones, the increased reliability of new ones and the inconvenience of using the “Frog” itself.

The principle of operation of a universal charger is that the battery is charged directly from the network. To do this, you need to remove the battery from the phone, connect it correctly to the “Frog” antennae and connect the power by inserting the charger into the socket.

The difficulties are obvious. Open iPhone case or iPad is not so easy. Here you cannot do without special tools, the use of which at home creates a high risk of damaging the miniature circuits of the device, introducing dust into the case, or breaking it.

Video: how the Frog charger works

Alternative iPhone charging options

Technologies do not stand still, they develop, become more mobile and progressive. Chargers are not far behind: they promote the brand alternative sources energy. They all use the energy of wind, sun, movement and even fire to turn them into electricity and power our devices.

Wind generators - small devices, which, as the name suggests, are powered by the wind. The movement of air causes the blades to rotate, which through simple manipulations produces energy.

Wind generators are not the most popular type of charger, as there is always a risk of falling into a calm zone

Much more known method energy generation - solar panels. Scientists say the Sun will stop producing light and heat in about 4 to 6 billion years. This makes our main luminary a source of inexhaustible energy. And even though you won’t be able to charge the batteries at night, you can do this in abundance during a fine day.

In cloudy weather, the performance of the solar battery decreases

The next power source is a dynamo. What's more renewable than your own energy? The most inventive ones manage to attach a dynamo to the wheels of a bicycle, thereby freeing themselves from routine work for the sake of a fun ride.

The dynamo can also be used as a power source to charge your smartphone

These devices are on sale in almost all online stores specializing in technology and have USB ports specifically for charging phones.

How to speed up the charging process of your Apple device

Each of us at least once in our lives was in a hurry and at the same time had a dead phone. Now smartphones are not only a means of communication, but also an organizer, link With by email, notepad and so on. Therefore, there is a need to charge the phone as quickly as possible.

There are several ways to reduce battery charging time:

Each of us has at least once found ourselves in a situation where the phone is discharged at the most inopportune moment, and there is no charger at hand. This is especially annoying when at this time you need to make a very important call or urgently use your phone data. This article will tell you how to avoid awkward situations and how to find a way out of them when it seems that there is no way out.

If you don’t find a charger in your bag, and you need a smartphone right away, then don’t give up; nowadays there are many new technological devices that can save you in this difficult moment.

The simplest and most obvious way at first glance is to use a laptop or PC as a power source, that is, using a USB port. To charge your phone, you just need to have a charging cord with you, and instead of the power supply, use your PC or laptop, connecting one end of the cord to the iPhone and the other to the computer. Of course, the charge speed will be a little slower, but you are already saved, all that remains is to wait a little time.

Charging using third-party power sources

There are many accessories on the electronic goods market that can be used to successfully recharge your battery. This could be a PowerBank from various manufacturers and a variety of portable storage devices. The system of their operation is extremely clear - you connect the gadget to your phone and enjoy the result.

1 With portable battery or whatever they call it differently Power Bank, you don’t have to worry about how much percent is on your phone, because you carry a “second battery” with you. On this moment choice and price policy There are a lot of such devices, and you can find exactly the one that suits you in terms of color, price and characteristics.
2 Portable batteries powered by nature. The devices that appeared on the shelves not long ago have already won the hearts of fans. active rest. If your phone is dead and you are high in the mountains, on a sunny beach, or perhaps just in the country, you will find power sources that will help charge your smartphone using fire, wind or solar energy. Each of these methods is actually very simple and easy to use.

How can I charge without a cord?

To charge your essential gadget without using a cord, there are several innovative types of energy sources. Especially for the iPhone 6 and other models, we have developed a very stylish and convenient iQi Mobile charger, both for working at your desk and at home, thanks to which you can forget about a bunch of wires. You just need to place it once on a horizontal surface convenient for you and your phone will always be at hand. This type of charger is suitable for the following models: iPhone 5, iPhone 5s, 5c, 6, 6+. Unfortunately, iPhone 4 does not support this type of device.

You can also charge your iPhone using a special Smart case Battery Case. It fits iPhone 6, 6+ models. One part of this case is flexible enough to easily insert or remove an iPhone. While charging in such a case, the navigation panel of the device will display 2 stages of charging - the built-in battery and the case. Using this accessory, it becomes possible to talk over cellular communication about 25 hours or surf the Internet for about 18 hours. Maximum convenience when turned on, they make this accessory top-of-the-line, because in order for it to work you just need to press the power button and you’re done.

Charging in public places without a charger

It happens that you went shopping at the mall or decided to have a cup of coffee with friends, and your smartphone suddenly shows an ominous red battery. Even if you don’t have a charger at hand, there is a way out. In addition to various accessories, there are very convenient and effective ways to charge an iPhone or other smartphone if you are in public place. We can offer you some of them:

1 Special terminals for charging devices. These are special cells, inside of which there are several types charging cords, you can leave your phone there for a while and come back for it whenever you want, and it will already be waiting for you with full battery and ready for further use. Such cases are just gaining popularity, so you can find them inside airport buildings, railway stations, large shopping centers and cafes.
2 If you are in a cafe, then most likely you can ask the bartender behind the counter or the waiter to put the phone on charge for a while. Almost every cafe has such a completely free service. 3 Walking around Shopping center you can go to your phone's brand store or any other electronics store and ask them to put your phone on a little charge. You are unlikely to be refused, since such stores have chargers for almost any phone model. 4 If you are driving, don’t be upset; when you stop at a gas station, while your car is being refueled, you can ask for a little recharge of your phone, and at the same time drink a cup of tea or coffee. This service is also free.

False methods or what is better not to do

The Internet is filled with many videos and detailed instructions, how to charge your phone using fruits such as apples and lemons. In fact, this will not do any good and may even harm your phone, and your charging port may break or burn along with your phone.

There is also a method on the Internet that describes in detail how to strip the wires on a broken charger or how to charge using wires. We do not recommend performing such operations without proper repair experience and skills in working with electronics.

PS

1. You can switch your phone to Airplane or Airplane mode. In this mode, the phone will discharge much more slowly.
2. If it is not possible to use the first option, then simply turn off GPS and other additional functions. Also lower the screen brightness.

The reality of modern times is that now there is not a single person without a mobile phone. This is normal, because all kinds of smartphones and all kinds of gadgets make life much easier. If earlier you could only make calls, now a mobile phone is just a computer that fits in your pocket. You can call, play, listen to music, go online or watch a movie, and all this is possible thanks to gadgets. But such potential of technology requires constant charging of devices, and the charger can fail at any time. What to do in this case?

For example, let's take one of the most popular brands mobile phones, iPhone. What to do if it is simply impossible to charge it using a charger.

Looking for an innovative solution

How to charge an iPhone 4 without charging if the charger suddenly breaks down or there is no electrified network nearby? This question torments many people today, because without electricity, a mobile phone, or any other gadget, is simply doomed to “starve” to death. Naturally, manufacturers are struggling to increase the energy capacity of the iPhone battery or change the design of the charger for charging even without electrical network, but so far this is only experimental.

There are quite a lot portable devices, which can help charge the phone, but in practice they cannot compare with conventional chargers, but when there are simply no options left, you have to look for an alternative. There are several solutions to the problem related to charging the phone and they really work.

Charging via USB

Manufacturers have only recently begun to make Alternative option charging your phone, and now when you buy an iPhone, not only a charger is available, but also a USB cable, which can be a good replacement for a charger.

In case the main charger box fails, you can disable USB, and connect to any power source that has a corresponding input. It could be desktop computer, laptop, tablet or other devices. This method easily solves the problem with charging an iPhone, but we must not forget that the speed of energy supply is significantly reduced. If using a charger a smartphone could be charged in no more than 2–3 hours, then using USB this time doubles.

Charging with the case

As surprising as it may sound, it is now very easy to find a case that not only protects your phone from scratches and shocks, but also charges it. This charging option appeared literally a few years ago, but at the same time quickly gained its popularity. The whole point is that the case in which the iPhone is located is equipped with an additional battery with a capacity of 1500 to 3200 mAk, that is, it can become an excellent alternative charger. The bottom line is that the case does not actually charge the phone, but simply maintains energy in it, due to which the smartphone can be used much longer.

This method often saves you when you have to go out into the countryside or into a village where there are problems finding an outlet of suitable power. In addition to the function of charging the phone, the case is also shockproof, and simply has a beautiful and pleasant appearance. When using the case instead of a charger, the device displays the level of discharge of the secondary battery.

iQ Technologies

Among all the alternative ways to charge a mobile phone, the innovative iQ technology can be called the most popular on the market. The charging system is similar to when a phone recharged from the case, but here the speed of energy transfer is significantly increased. The iQ charger is best used only at home, because it is quite large, although it looks attractive from the outside.

This wireless way iPhone charging has one very interesting feature. The bottom line is that there is no need to constantly connect the cable, and thus you don’t have to worry about injuries to the charging pad. Many people have encountered a problem when the connector falls off after using the phone for a long time and this problem is inevitable. I have to constantly charge my iPhone due to heavy use, but wireless system iQ easily solves this problem and prevents damage to the charger input.

On modern market such wireless charging platforms are presented in different forms, colors and materials, so there will be no problems with the choice. In addition, it is also important to consider the ease of use of the charging platform.

The perfect way to charge your mobile phone

Using the method using iQ charging is, of course, convenient, but still the plastic quite spoils the appearance of the phone. Even so, the method became the most popular, so manufacturers began not only to work on iPhone wireless charging, but also to think about appearance plates. Today we can say for sure that iQi Mobile has no worthy analogues.

This innovative way to charge your phone combines a silicone case that contains charging plastic. If its thickness used to confuse device owners, now it is about 1.5 mm, which is almost invisible under silicone case. In addition, if you use the wireless charging method, it remains possible to simultaneously use the charger. Even so, an alternative charger has its advantages and disadvantages.

Advantages:

• comfortable use;
• no need to use a mechanical connection;
• safe operation at high humidity.

Flaws:

• You cannot use the phone while the battery is charging;
• the weight and thickness of the phone increases;
• high cost of a wireless charger.​

Conclusion

Anyone can charge their phone from a computer with via USB, but this is not always possible. Sometimes, when you go out into nature or to another place where there is no electricity, the phone just doomed to completely discharge, and in our time - this is destructive for a person, because the connection with outside world. Alternative methods Chargers can be an excellent solution to problems in this case. Many innovative technologies help charge your phone by converting thermal, kinetic and mechanical energy into charge for your phone and even though a large number of disadvantages, sometimes you simply cannot do without such options.

Charger failure, low-quality or non-original adapter, lack of electricity. These and many other reasons may prevent a user from charging an iPhone. However, just for such a case, there are many other modern methods to recharge the device.

If you don’t have an original charger at hand and the battery is almost running out, you can use one of the following simple methods. Most of them can become a worthy alternative for Lightning.

Via USB port

If you only have a USB cable at hand, you can use it and a computer to charge your mobile device. USB 2.0 and 3.0 connectors are suitable for this. The disadvantage of this method is that the cable has insufficient power, so it will take a lot of time to reach 100% charge.

If you connect the USB cable to the adapter, you can use a wall outlet instead of a computer. This method will be faster, but you will need to wait up to several hours.

Charge without a cord

There are two options for alternative power sources that are offered on the modern market:

• solar battery. It is a portable device that stores solar energy and can transfer it to the mobile phone in the form of treasured battery percentages. Naturally, in cloudy weather, use solar battery it will be difficult;
• portable accumulator. Can be wired (imply the mandatory presence USB cord) and wireless. You can purchase the device at price range from 500 rubles to several thousand. The only difference will be in power: the more powerful the “charger”, the more expensive it is. The optimal power level is considered to be 10,000 mAh.

In order for the battery to supply energy to the mobile phone in a difficult situation, it must also be recharged in a timely manner.

Note! Another lesser-known device is a device that converts heat into electrical energy. It is installed directly on the fire (or near it), after which it is connected to the mobile phone. This method is ideal for hiking or other conditions in which it would be difficult to obtain electrical energy.

iQi Mobile wireless charging

An innovative device from the manufacturer Apple is original battery, which charges a mobile device contactlessly under any conditions. The advantages of the iQi Mobile Wireless Charging device are:

• affordable price;
• light weight and compact dimensions (convenient to take with you on the road);
• the ability to place the device under the mobile case;
• no need for electricity sources;
• the ability to charge the gadget;
• high charging speed;
• compatible with all iPhone models including X, 7 Plus, SE, etc.;
• work without USB usage cord.

All that is required for work is compatible charging like Koolpuck or Koolpad. Enough to position wireless charging nearby and the battery percentage will begin to increase rapidly.

Case with battery

The battery case is an innovative development, invented for those who constantly need to charge their phone when there is no network nearby. This device works in the following way:

1. We install the mobile phone inside. To do this, pull back the top edge and insert the device.
2. Charging. Being in iPhone charging case works automatically. To avoid wasting excess energy, monitor the level on the screen of your mobile device.
3. Remove from charge. To do this, pull back the top edge and take out the phone.

Note! The charging case also needs to be recharged. To do this, use a USB Lightning cable and any user-friendly energy source. You can use a licensed “charger” for iPhone.

Since such a case is not equipped with any indicators, its charge level must be monitored through Apple device. To do this, place the phone in the case to charge, after which two battery indicators will be displayed on its screen - the main one and for the Smart Battery Case.

What to do if your iPhone won't charge

Sometimes you cannot charge your mobile device, even when you have the original charger at hand. Knowing the causes of this phenomenon, you can try to correct the problem at home. Let's consider possible ways solutions:

• faulty USB port. Malfunctions in the laptop may result in problems with USB connectors. If you charge your iPhone this way, test all ports, constantly monitoring the charge level. Often this method helps, and charging still begins in one or more ports;
• Lightning connector is dirty. This happens even if you use a case and keep the device completely clean. Try cleaning the connector with a toothpick, but be careful not to damage it internal contacts. It is best to carefully go around the corners without touching the central part. After this, the input should be purged and you can start charging.

If the phone is so discharged that it turns off, it naturally may not immediately respond to the charger. Wait 10-15 minutes before moving on to the next method.

If neither one nor the other method helped, but you use original charger, then most likely the problem lies in the mobile device itself. Problems may arise with the battery, firmware, or power controller. In this case, you will need to contact service center for diagnostics and subsequent repair work.

We use other chargers

Any specialist will confidently say that for high-quality iPhone charging It is best to use the original device. But this is not always possible, and besides, certified models are quite expensive. In such situations, users resort to using other chargers, for example:

• Chinese analogues. Using cheap analog chargers - effective way to charge your mobile device. It's cheap, but very short-lived.
• direct charge. This method is very dangerous, however, experienced users can take a chance and take advantage of it. To implement this, you will need to disassemble the iPhone and remove the battery. After this, carefully cut off the connector from any charger: you will see blue (+) and red (-) wires. We connect these wires to the contacts on the battery and secure them with electrical tape. It will be impossible to control the charge level, but if everything is done correctly, then rest assured that the device will be charged. If you are not confident that you can carry out the process safely, then this method It's better not to use it!

The described methods may be suitable only for the most extreme cases and for one-time use. It is strictly not recommended to use them constantly: this can cause harm to both the mobile device and your health.

What is better not to do

Sometimes iPhone users who cannot charge their device in any way, go to extreme measures to do this or neglect safety rules. Such users should know in advance what they should absolutely not do:

• constantly use uncertified chargers. There are hundreds of cases of mobile phone fires, battery failure, and serious breakdowns. The causes of these problems were non-original chargers. Cheap analogues will serve your needs iPhone bad service, so it’s better to pay more, but buy the original Lightning;
• try to disassemble the phone yourself. You especially shouldn't do this if you don't understand mobile devices. You can be sure that as a result you will have to contact a service center;
• Do not leave your mobile charging after the battery is fully charged. This has big influence on the battery and shortens its life;
• follow the instructions. Additional charging devices must be used strictly in accordance with it. Do not neglect safety rules and the battery will last you a long time.

Important! Experts recommend keeping charging at an average level. It ranges from 40% to 80%. It is better not to bring the charge level to 100% and not to let it drop to 0%: this wears out the battery. The ideal option is to charge the device more often, but for a shorter period of time.

Results

There are many devices, including non-standard ones, that help charge the iPhone even in difficult conditions. However, it is not recommended to use them constantly, but only in rare cases. The best and in a safe way The original device remains for charging.

Video

Surely every iPhone owner charges his gadget in a chaotic manner. Knowing that the device will last for about one day of light, we try to snatch precious energy here and there, at least for the same 20-30%. We are talking about random recharging at the workplace, with friends, in the car and other sources. And this is on the one hand, and on the other hand, we “fry” our devices, leaving them to recharge overnight, which in most cases exceeds the time mark of seven hours.

Let's try to figure it out and decide (iPhone 5S) your gadget and how negatively the erratic connections described above will affect the life of the battery as a whole. The opinions of experts in this field and reviews of ordinary owners of these gadgets will be taken into account.

In general, the average user does not ask himself any serious questions regarding charging the device - he plugged the gadget into the outlet and forgot. However, there are some interesting and important points that few people know about. These nuances, coupled with general recommendations will just help answer the question: “How to properly charge an iPhone 5S?”

We will systematize and pay attention to all the practical and critical points from the standard operating instructions for the gadget, which, one way or another, relate to our topic.

How to properly charge your new iPhone 5S

The first charge of your gadget is one of the most important moments. In order for the device to serve properly for many years and make you happy for a long time battery life, it is necessary to correctly carry out the first recharging cycle.

How to properly charge iPhone 5S for the first time:

• as soon as you take your gadget out of the box, connect it to the charger for at least three hours;
• If the battery indicator is 100% full, you can safely use the device up to complete discharge battery;
• after the device turns off, leave the iPhone alone for about two to three hours;
• After the specified time has passed, reconnect the phone to the charger and again wait until it is charged to 100%.

It is also worth noting one important nuance in the question: “How to properly charge an iPhone 5S for the first time?” During the first charging cycle, you should never use the gadget, otherwise new battery will begin to “sag” and lose, albeit very small, but such an important amount of battery. Also, before charging properly new iPhone 5S, that is, according to the instructions described above, make sure that the charging place excludes any sources of moisture (bathrooms, vases with water, aquariums, etc.) and direct sunlight. That is, in fact, everything that can negatively affect the first cycle.

Should I charge at night or not?

In order to really understand how to properly charge an iPhone 5S and whether to leave it overnight, you need to clearly understand what exactly happens to our gadget after connecting to the charger.

It’s worth noting right away that, as in most other similar cases, the charging controller, or in other words, the power management module, is responsible for the process of powering the device. This controller is directly connected to the battery capacity indication, that is, it does not allow the gadget to be recharged and at the same time tries to quickly fill the volume to 100% in a reasonable time. It should also be noted that the first 80% of the battery capacity is filled quite quickly, and the next 20% is in a gentle mode, that is, noticeably slower.

Once the battery is fully charged, the power management module turns off power without taking or transferring charge to the battery. The gadget itself will work at this time from the network, that is, in in this case The battery neither charges nor discharges. Keep this point in mind before properly charging your iPhone 5S.

Features of long-term charging

Many become hostage to the myth that after reaching 100% of the indication, it begins to work cyclically, discharging and recharging. In fact, this is not the case, otherwise it would lead to significant wear and tear on the battery, which neither the manufacturer nor, of course, the user was happy with.

Next is another fact on the question of how to properly charge an iPhone 5S. Surely every owner mobile gadget knows that any battery is subject to self-discharge. And this is quite normal, unless, of course, it is connected to the charger at this time. U lithium polymer batteries, with which fifth iPhones are equipped, this figure fluctuates around 5% per month, which is extremely low when compared with other types and types of batteries.

Charging cycle

The power management module periodically checks the remaining battery capacity, and if it encounters a significant loss of charge, it begins new cycle energy supply. This need arises after the loss of at least 2% of the charge, and this does not happen more than once every two weeks. That is, if you forget your gadget connected to the network for a whole month, the controller will start recharging the battery once or maximum twice.

Taking into account all of the above, we can safely conclude how to properly charge the iPhone 5S, and that leaving the gadget connected to the network all night will not risk anything and will not cause any damage. battery.

Power adapters

A standard charger (5V, 1A, 5W) will fully charge your gadget in about an hour and a half. There is nothing to add about branded “Apple” adapters - they are made with high quality, conscientiously and extremely rarely break.

Some people ask a very interesting and quite logical question: “Is it possible to charge your iPhone 5S using an iPad charger?” Yes, you can. Some particularly zealous admirers and commentators on specialized forums immediately counter that this is extremely harmful to the phone’s battery for one reason or another, but let’s sort it out in order.

Firstly, on the official (!) Apple resource There is a corresponding topic where it is stated in black and white: “Even though the charger is designed for an iPad, you can also charge any model of iPhone or iPod with it.” And such a point in the text is clearly not present in order to make money from users by selling them new batteries.

Myths

Yes, there are more than enough myths that you can’t charge your iPhones with adapters from iPads. This procedure allegedly completely kills phone batteries, significantly reducing battery capacity. Experts in this field (whom you should listen to) unanimously assure that this is not so.

Remember that the charger, as we used to call it, with which we power the phone, is not a charger at all, no matter how punish it may sound. This is the most common power adapter direct current. The phone charging module is located in the gadget itself and is the same power controller mentioned above. It is this module that determines exactly how much current to send to the battery.

Chinese power adapters

It’s not worth considering from the Middle Kingdom. Almost all experts unanimously advise against using Chinese adapters food due to their dubious quality. They are the ones that can completely ruin your battery.

Literally all field tests showed that real characteristics Chinese chargers differ significantly from those declared. Of course, due to the cheapness of these adapters, the temptation to buy is very great, but you will remember these couple of paragraphs more than once when your iPhone stops charging, so it’s better not to risk it and stick to branded “Apple” chargers.

Car adapters

In general, all car chargers are bad for your gadget. They can only be used in the most extreme cases, because the risk of completely destroying your battery is very high.

The thing is that the automotive power system is far from being a standard for the stability of current and voltage, and those chargers that we see on the shelves of car stores are simply not able to protect your iPhone from electrical surges. Car adapters can easily damage your phone's power management module, which best case scenario will affect the charging time, and at worst - a complete failure in the energy supply of the gadget even with a proprietary charger from standard network at 220 V.