How to charge an iPhone if the cord is broken. To charge your iPhone, use an original charger and at least a certified USB cable. How to charge iPhone using chargers

Users of even the most modern gadgets sometimes blindly follow a rule that was widespread at the dawn of mobile communications: Before using, the device must be completely discharged, then fully charged.. The most fanatical users have developed this rule to the point of absurdity, proposing to fully charge and discharge the iPhone three times. Whether this makes any sense at all – we’ll look at it in the article.

Practical research into the issue of charging mobile devices was carried out by someone Eric Leamer - his experiments led him to unexpected conclusions. It turns out that charging your iPhone to 100% is not possible at all. harmful– the optimal charge level should be from 50% to 70%. When charged to 100%, the iPhone battery can withstand only 500 cycles, while when charged to 70%, it can last over a thousand.

Where did the prejudice about the importance of a full charge come from? The first cell phones were equipped with nickel batteries, which were susceptible to so-called memory effect. Memory effect is that if the operating instructions are violated, the active substance of the nickel battery crystallizes - as a result, the maximum amount of energy that the battery can store decreases. The battery “remembers” that it was not fully used before, and therefore releases energy only up to a fixed limit - hence the name of the effect.

Modern gadgets are equipped with lithium-ion batteries, which There is no memory effect. Almost everyone who talks about the need before use completely discharge the phone, belong to the older generation and started with black and white “dialers”, for which this rule was relevant. Nowadays, a buyer will not hear such a recommendation from a competent consultant in a salon.

How long does it take to charge an iPhone?

iPhone charging time depends on a number of conditions:

Battery capacity. The latest modifications 6 and 6S have larger batteries, so they take longer to recharge.

power unit. There is one secret: If you use the iPad's power supply, charging time will be reduced to a minimum. There is no need to fear that this method will negatively affect the battery: Apple itself does not prohibit this.
Parallel use. If the owner of the gadget uses the gadget while charging (for example, plays), more time will, of course, be needed.

A “healthy” battery does not need more than 3 hours to charge from 0 to 100%.

If the iPhone does not have enough night to fully recharge, it is better to contact a service or sales office under warranty.

Don't let your gadget overheat. Pay attention to this scale, which is posted on the official Apple website:

The ideal temperature for operating the iPhone is from 16 to 22 degrees. Using it at a different temperature will not degrade the quality of the battery, however, the device itself will hold a charge for less time.

Recharging is a different matter: if it is carried out in conditions of high temperatures, devastating consequences for the battery cannot be avoided. Statistics say: constant recharging at a temperature 10 degrees above normal leads to the fact that the battery drains by 20% in a year - within three years your iPhone will need expensive repairs.

Therefore, under no circumstances leave your smartphone “charged” on a windowsill in the summer, in a car, do not cover it with a pillow and blanket, or remove the case from it while it is charging!

Use only certified accessories. Please note that we are not talking about original, but about certified USB cables and power supplies. The latter can be produced not only by Apple, but also by another company, which means they have a lower price. You can determine which accessory is certified by the “Made For iPhone” inscription on the packaging.

Certified accessories (like the iPhone itself) have special PMIC controllers that “monitor” that the current, voltage, and temperature do not exceed acceptable limits. If, for example, the iPhone overheats, charging will stop and a message like this will appear on the screen:

There are no controllers on Chinese “no-name” accessories, so the user uses them at his own peril and risk. Note the statistics: increasing the charging voltage by just 4% above normal will cause the gadget’s battery to wear out twice as fast.

Fully discharge your iPhone, but don't do it more than once a month. A monthly full discharge is needed to calibrate the power controllers. Many Apple users notice that their devices turn off when the charge is 2-3% - this is a sign of uncalibrated controllers. However, it is impossible to constantly “wear out” the iPhone to zero - this is extremely detrimental to the battery. Try not to force your gadget to turn off more than once a month.

Conclusion

Sooner or later you will have to spend money on replacing the iPhone battery - this is a given. Regarding the timing, the opinions of many experts and the author of the article differ: you can often find recommendations to change the battery every 2 years of intensive use of the gadget, however, the author’s iPhone battery is constantly in use and has not caused any complaints for 3 years now. It is important to monitor the quality of accessories and recharging conditions and then you will not have to enrich the service center technicians.

Today it is impossible to imagine a modern person without a mobile phone. However, it is impossible to imagine an electronic gadget without additional devices accompanying the full process of operation, the presence of which is a mandatory necessity. For example, a failed charger will certainly doom the “dependent” device to “energy death”. However, the question of how to charge an iPhone without charging, given the great popularity of the “yield” Apple brand, requires special coverage. Several of the most original technological innovations will be presented to your attention, allowing you to “pump up” Californian gadgets with the much-needed power of electricity for their batteries, of course, without the “participation” of the standard charger provided.

In search of promising technologies

First of all, the question requires some specification. After all, each of us knows that without the influence of a certain type of energy, none of the known inventions of “human genius” will be able to function. Therefore, the question of how to charge an iPhone without charging does not yet have a complete answer. Of course, some attempts by developers to change the principle of “life support” of the phone were successful. It goes without saying that the standard memory will undergo dramatic changes in the near future. The problem of “expedient universality” already has several fundamentally different solutions. However, today it is not yet possible to “globally decouple” mobile units from commonly used power outlets. However, how to charge an iPhone or other “brainchild” of the electronics industry when there is no access to the “benefits of civilization” is already a realistic reality. But the low efficiency (efficiency) of the developed and, by the way, mass-produced devices and at the same time the not thoroughly thought out “mechanism” for supplying a certain charge power somewhat distances it from being a full-fledged alternative to a 220 W source or another rating of the generally accepted standard of centralized electrification. As a result, we are seeing an ever-increasing need for and genuine interest from manufacturers... It is these facts that are pushing developers to find the most appropriate technological solutions.

Review of the most effective methods of “energy refueling” without using a standard power supply

Method No. 1

Perhaps, let's start with the most basic, but not always accessible, option for powering a mobile device. Perhaps you don't know how to charge your iPhone from your computer. Therefore, let's look at this charging method, which, as you understand, involves using a laptop, tablet or device equipped with If the operating level of the battery has become critical, and your device is “tired” of warning about it - the screen blinked and went out, you need to connect it to any available device that has the required port. Thanks to this, you will be able to answer the question of how to charge an iPhone without charging with a practical action.

Not demanding method No. 2

Today you can buy a charging case. That is, the design feature of such a device will be the presence of a built-in battery, the capacity of which varies from 1500 to 3200 mAh. This allows you to use the phone for quite a long time without recharging. A convenient case is not only ergonomic and aesthetically attractive. The in-demand device will help to effectively solve the problem of how to charge an iPhone without charging, and will also provide shockproof properties to the device. Moreover, protection against mechanical damage to the back of the iPhone is guaranteed in any version of the charging case. The indicator on the front panel of the device shows the battery level, thanks to which the user can always visually determine the level of performance of the auxiliary battery.

Not quite an easy way #3

Of course, iQ technology - a definitely innovative option for wireless charging - helps to effectively “refill” the battery capacity without the difficult moment caused by connecting a 30-pin connector to the connector. The question of how to charge an iPhone without charging will no longer express unrealistic hopes. At the same time, the comfortable method greatly facilitates many operational tasks, and in particular, it is the most gentle way to restore the electrical potential of the battery. Since wear and damage to the contact pad of the iPhone is a natural inevitability due to intensive use of the phone, as a result of which the device often has to be recharged. The attractive design of the module, which is an intermediary element between the charging station and the battery of the mobile device, is mounted on the back of the gadget, and the installation process is not complicated and does not require special tools or installation skills. On the market, these are products that are presented in a variety of designs. The color, texture and material of the “intermediate device” are available to the user to suit almost any preference. The only disadvantage of such a memory can be considered the necessarily accompanying process of “upgrading” the device, which increases the “waist” of the smartphone by several millimeters. However, sometimes the question of how to charge an iPhone is resolved not only in this way...

Improved method No. 4

Today, the iQi Mobile project presents a slightly improved version of the new power standard. Despite the “freshness of the idea,” an ever-increasing trend of consumer demand is visible in the market for goods for mobile devices. The qualitatively modified charger, which has received wide recognition in user circles, allows for wireless “filling” of electricity into the phone’s battery. The main advantage of the new product is a critically reduced induction plate (receiver). The problem of how to charge an iPhone without charging and without “disfiguring” the design is becoming completely solvable. After all, the thickness of the additionally installed element is only 0.5-1.5 mm and is practically invisible under a thin layer of silicone frame. This fact sets iQi Mobile apart from previously implemented wireless power standards. The connection condition can be considered important: a flexible connection to the Lightning port does not in any way complicate the user’s subsequent actions, primarily related to the use of the 30-pin Iphone port. Agree, this greatly simplifies many aspects of mandatory access to the sometimes extremely necessary system connector of a mobile unit.

Several arguments in favor of wireless storage

No mechanical connection torque (direct contact).
Possibility of safe operation in unfavorable environments (moisture, dampness).
Ease of use (mostly).

A little about the disadvantages

Cost, size and weight are increasing.
The time parameter of the useful action of electrical energy significantly exceeds the standard version (taking into account the efficiency of the original charger).
It is not possible to use the phone while the battery is charging.

Summing up, or Energy prospects for iPhone

You know how to charge your device from a computer. But what do you do when you're camping or find yourself in a situation where there are no standard power sources available? Today, there are devices on the market that can charge mobile devices using alternative methods of generating electricity. These are original technological solutions in the form of converting devices that convert mechanical, thermal, kinetic, magnetic and other types of energy into the voltage and current required by your device. Of course, there are many more disadvantages and shortcomings in the available devices than we would like. Price, weight, dimensions and other disadvantages hinder the path to achieving absolute perfection. But time passes and technology develops...

Owners of a fashionable gadget know that they need to charge their iPhone every day. It becomes a habit - put it on charge in the evening, the battery is full in the morning. And some people believe that you can charge your iPhone only after it is completely discharged. Whose opinion is correct?

According to experts, lithium ion batteries need to be charged every day. This also applies to charging iPhones. If you want the battery to last a long time, you need to charge it to capacity.

How to properly charge an iPhone

Experts have the following opinions on this matter:

You need to charge your phone often. That is, if the charge level has not yet reached 100%, then there is no need to wait for this. And there is also no point in allowing the battery to completely discharge every day until the device is turned off. This mode is detrimental to the phone, so it is better to charge the iPhone several times a day a little at a time rather than from 0 to 100%.
The charge level must be kept above the average level. That is, these numbers can range from 40% to 80, and you can connect even when the battery shows a 50% charge. But it’s best to turn off charging when the battery is not yet fully charged. A 90% charge is sufficient.
Full discharge and 100% charge – once a month. If the battery is discharged until the device is completely turned off, you can charge it to the maximum level - 100%.
Many Apple product users find it convenient to charge their phone at night. In the morning the battery shows full charge. But in this way you can quickly drain the battery, because it does not charge throughout the night, and then remains in standby mode, but on recharge. This way the battery deteriorates faster.

How to properly charge an iPhone - tricks or how to extend battery life

To ensure your battery lasts longer, consider the following:

if you constantly charge the battery to 100%, then such a device will last for a maximum of 500 cycles, while when the battery is charged only 70%, the battery life increases and then the battery will last for 2000 charging cycles;
Do not expose the device to hypothermia or overheating. The extreme temperature range is: from +15 degrees to +40 degrees. If there is a record high outside in the summer, the iPhone battery may lose 35% of its capacity;
The battery tolerates overheating worse than hypothermia. Therefore, it is better to refuse a wireless charger or use it in case of emergency, when it is not possible to connect to the network. All wireless charging creates excess heat and wears out the battery life;
You can extend the life of your iPhone battery in this way: reduce the screen brightness, turn off those applications that use GPS navigation. If the signal is bad and the phone is in standby mode, then it is better to turn on the “Airplane” mode;
turn on Energy Saving mode. To do this, go to “Settings” - “Battery”, make the appropriate mark “On”.

You recognize this situation: after leaving for another city or traveling, you suddenly remembered that your iPhone charger was left lying on the coffee table at home. The situation, naturally, is not a pleasant one, because without a gadget in our time, it’s like being without hands. Due to the fact that the battery does not last forever, you need to think about how to charge iPhone 5 without charging.

It’s good to have someone nearby who can lend you their charger, or to have an Apple service center somewhere nearby. But fate rarely gives such gifts. It would be strange not to start with the simplest thing - a USB port. Surprisingly, for some users even this information may be a revelation. If you have an iPhone charging cable (without a power supply) and a laptop/PC at hand, you can quickly and easily charge your phone. You just need to plug the cord into the USB connector and wait for the treasured hundred percent of the battery.

Related articles How to charge your phone without charging How to make wireless charging yourself How to charge a laptop without a charger

How to charge an iPhone without a cord using alternative power sources

The problem of a forgotten charger at home can now be easily solved with the help of alternative power sources. You can replenish the required battery supply using external batteries. Portable storage devices have firmly established themselves in the market for essential and everyday goods. This small box, which can be ordered/purchased in an online store, is capable of delivering four full charges to your favorite smartphone. The choice of device depends on the capacity reserve expressed in mAh value, additional functions (flashlight), and design.

Thanks to a portable battery, you can forget about a low battery for several days, although the charging process will take a little longer. Simply connect the accessory to the mobile cord and press the “turn on” button. A wide selection of these devices on the market allows you to buy them inexpensively - the price ranges from 500 to 5,000 rubles, depending on the capacity. As an alternative, inventors have come up with several other types of additional power sources:

From a solar battery. In the catalogs of online stores around the world you can already find these simple devices at an affordable price. They look like external batteries with one exception - they need to be placed in a place where there is direct sunlight and the phone can stay afloat for a long time. Thanks to this method, you can quickly solve the following question: how to charge an iPhone without charging.
From the fire. An unusual device whose job is to convert thermal energy into electrical energy. Special braziers are placed on the fire, a cable is connected to them, and the phone begins to quickly dial up interest. This charging method is ideal for hikers and those who don’t know how to charge an iPhone 5s without charging in nature.

Wireless charging for iPhone iQi Mobile

Recently, the gadget market has been replenished with another new product - the iQi Mobile wireless charger for Apple iPhone, sold at prices ranging from 1,200 to 3,000 rubles. The principle of operation is very simple - electromagnetic energy is used, acting inductively on a special battery attached to the phone. It sounds complicated, but in reality everything couldn’t be simpler: this is a thin plate 0.5 mm thick, which fits under any case and is connected to the smartphone connector with a lighting cable. After this, the iPhone is placed on a special docking station and charged wirelessly.

iPhone charging case

A special battery case has become a very popular product of our time, after putting it on the iPhone begins to rapidly replenish the battery capacity. The device has a capacity of 2200 mAh, which is enough to extend the life of the smartphone by a good 1.5-2 days. An important point is to take care of charging the case itself in advance, otherwise it will turn into only a protective shell and, I would like to note, a very weighty one. The design of the accessory is laconic - one “turn on” button and an indicator panel displaying the remaining battery. The cost of the gadget is reasonable – it sells for between 800 and 2,000 rubles.

What to do if the iPhone does not charge from the original charger

A lot of people face a similar problem. The original wire, produced by a large American company, can break for various reasons. This could be incorrect handling, ordinary technical problems, the malfunction of the connector on the phone itself, and much more. Let's consider solutions in cases where the standard factory charger does not charge the iPhone:

Software error. Sometimes malfunctions occur in the program that sends signals to a special charging controller (chip). If the software is in a “frozen” state, then the phone will not be able to recognize that the current has already flowed. There is a simple solution - simultaneously press and hold the Home and Power buttons on your iPhone for about 30 seconds before the reboot begins. After this, the smartphone should start charging.
The port that helps charge the smartphone is dirty. A common problem that arises among those people who like to carry a mobile phone in their pocket. Debris particles fall into the lighting hole and prevent the flow of current. The solution is simple - take a simple toothpick and use it to get out the dirt, and then blow it thoroughly. That's it, you can connect/charge.
USB port problem. If you don’t know how to charge an iPhone without charging and are using a cord connected to a PC or laptop, then you need to check all inputs for functionality. The problem is solved this way: just plug the wire into another USB port or use a regular 220V plug - you can charge.
There is a fault in the cable. It happens that when the wire is connected, the phone does not show any signs. This means that somewhere in the cord there is a break that can only be repaired by a specialist. The best solution is to buy a new iPhone charger.

Find out how to transfer photos from iPhone to computer.

Charging your phone with another charger

If none of the methods described above turned out to be useful, then there is only one option left, which is better to resort to as a last resort - connect the iPhone battery directly to other chargers. It should be noted right away that using this method is dangerous for both the person and the device, which will have to be opened in any case. Take precautions - carry out the operation with rubber gloves, do not touch bare wires with your skin. Scheme of how to charge iPhone 4 without charging (original):

Disassemble the iPhone and disconnect the battery.
Take any charging device, cut off the connector to connect to the phone.
Connect two exposed wires of different colors in series to the contacts on the battery, which has polarity indicators (blue to +, red to -).
Press the wires tightly and secure with electrical tape.
If you did everything correctly, then when you turn on the iPhone, it will show signs of life.

Find out more ways to charge your phone without charging.

Video: how to charge an iPhone without charging

How to charge an iPhone without charging at home. Charging an iPhone without USB - high technology news on the site"

Reviews and articles about new products in the categories: auto, business and analytics, video games, gadgets, hardware, energy mysteries, sound and acoustics, game consoles, Internet, research, cameras, computers, space, medicine, multimedia, navigation, science, laptops , game reviews, weapons, dissenting opinions, peripherals, tablets, press releases, entertainment, advertising, robots, rumors, software, TVs, phones, technologies, this is interesting.

We collect everything that interests people close to science and technology, as well as those who receive the fruits of the first two in the form of useful devices and gadgets, here and post them in an accessible form. If you want to know how the Universe was formed or which smartphone will satisfy all your needs, come in and stay informed. Every day the most interesting reading appears on the site, news and stories from the world of the virtual network, technology, space, cars are collected and analyzed - everything that makes the planet rotate and the imagination work. All you have to do is start reading any of the articles, and it’s proven: you’ll become engrossed!

In search of promising technologies

Review of the most effective methods of “energy refueling” without using a standard power supply

Method No. 1

Not demanding method No. 2

Not quite an easy way #3

Improved method No. 4

Several arguments in favor of wireless storage

No mechanical connection torque (direct contact).
Possibility of safe operation in unfavorable environments (moisture, dampness).
Ease of use (mostly).

A little about the disadvantages

Cost, size and weight are increasing.
The time parameter of the useful action of electrical energy significantly exceeds the standard version (taking into account the efficiency of the original charger).
It is not possible to use the phone while the battery is charging.

Summing up, or Energy prospects for iPhone

The battery has been considered the weakest link in the iPhone for many years. Under average load, it can keep the device offline for no more than a day, after which the gadget will be completely discharged. You may not be familiar with this problem only if you use it to make 2-3 calls a day with an average duration of 3-4 minutes.

Of course, Apple's proprietary charger ensures that the battery returns to full capacity within 1 hour, but if you go on a long trip, finding an outlet in time is a real challenge.

In order to renew the battery charge, you can use various energy sources: from computer USB ports to special cases. The choice depends on your preferences and available means.

How to charge iPhone without charging while on the road?

It is worth noting in advance that if you use a non-original charger or charging methods not approved by Apple, you risk damaging your smartphone or even getting injured.

Charging iPhone via USB connector of computer or car radio

To do this, you will need a standard USB cable for your phone (30-pin for older models and Lightning for all models starting with iPhone 5). Using it, you can charge your smartphone from any computer, laptop or tablet that has a USB connector. You only need to connect the cable to your mobile phone and computer, after which charging will begin almost immediately. In addition, if your car has a car radio with a USB connector for connecting flash drives, you can use it to recharge the device.

How to charge an iPhone without charging using iQi Mobile?

iQi Mobile is a small (thinner and smaller than a plastic card) external antenna designed to receive electricity from a Qi standard wireless charger. It is attached to the outside of the back cover of the smartphone using adhesive tape, and then connected to the Lightning connector. After this, a silicone case or cover is put on the device, which hides this “design”.

To start charging, just place the back of the iPhone on the surface of a special stand that supports the Qi standard.

Charging iPhone using an external battery

You can use any manufacturer if you purchase a universal external battery. It is equipped with a USB port for connecting a charging cable and will allow you to “resurrect” your smartphone as quickly as possible. In addition, there are special cases for the iPhone with a built-in battery (such as the Juice Tank Helium). It is enough to put this accessory on your smartphone so that it can extend the “life” of the device by almost 2 times.

The downside of most smartphones is that they run out of battery quickly. Unfortunately, Apple devices are no exception, so many users naturally have a question: how to charge an iPhone without charging. Is this possible in principle? Unlikely, but you can make a little effort and significantly extend its battery life by using third-party charging devices.

We'll tell you how to make your gadget work longer and look at the process of repairing a broken charger for Apple phones.

Many smartphone owners are concerned about the problem that they quickly discharge

How to charge an iPhone without using a special device?

There are several ways:

You can make up for the lack of energy using a USB cable - just connect your device to your computer, laptop, tablet and any other energy source through it.

Charging via USB

Using an external battery or powerbank - such devices can recharge your iPhone several times to a maximum of one cycle of its own energy reserve. External batteries are also charged via the network and are an excellent option for those who need to frequently recharge their gadget. They take up little space and are produced by many manufacturers - be careful when choosing, do not save too much on them.

Cases with built-in batteries. If you don't like carrying a separate device with you like in the previous case, you can buy a case that can charge your iPhone. It also needs to be “filled” with energy first, and when you are on the road, the case can provide several days of operation for the gadget. Note that this result, of course, depends on the battery capacity of the device itself.

Case with built-in battery

And, of course, many will find such a device an even better solution than an external battery, since the case additionally performs another main function - it protects the device from damage and scratches.

Solar panels. They are somewhat reminiscent of a power bank, but they do not need to be charged using electricity. All you need to do is connect your phone to the battery, place it in a sunny place and wait a bit. This is very convenient, especially in summer and spring, when the days are longer and the sun shines stronger. In addition, this option is better because you do not need to pre-charge the battery - solar energy will be an excellent solution when you cannot connect to other sources.

Solar panels

Fire-powered devices. Yes, you can charge your battery using real fire. For this, there are special blocks that convert heat into electrical energy. True, they are not as effective as other means, but in extreme cases they will save the phone from completely turning off.

Fire-powered devices

In the same way, there are wind generator devices that can restore charge using the wind. If there is no wind, you can compensate for it by running, or use the device while walking or cycling. True, it will take 5–6 hours to fully charge.

Wind generator

It is worth noting that in the future, chargers in the form of a power supply with a cable may disappear, because plates for wireless power supply will become more common. Why? This way you can better protect the charging connector, which quickly deteriorates due to constant use of the cable.

What to do if you don’t have all these funds?

In this case, use the following recommendations:

If you're near a shopping center, try looking for chargers in the rest areas or stores there. In addition, mobile operator centers should have network cables for most brands of phones by default.
You can go to a service center and ask to charge your phone - even if they ask for money for the service, it will not cost much.
There are special charging terminals - they are installed in the same entertainment complexes and are also inexpensive.
When charging your iPhone, turn on airplane mode - with this method of operation, all communication modules that consume the most battery power are deactivated, and you will replenish your energy much faster.

How to fix iPhone charger?

If your iPhone charger is broken and you are confident in your abilities and capabilities, try to fix it yourself. To do this, do the following:

Trim the plastic shell on the end of the charger so as not to touch its insides. We are talking about the thicker end of the charger.
Cut the cable where it breaks.
Remove the protective winding to have access to the 3 thin wires, which should also be visible from the plug.
Remove the insulation from all wires, but so as not to damage the metal core.
Connect all the wires together by color and wrap them with electrical tape.
The electrical tape must be applied so that there are no bare wires left.
If desired, buy heat shrink and put it on the part of the wires that you repaired.

After all of the above, you will know how to charge an iPhone without the main device. We recommend that you definitely purchase one of the recharging devices to be able to always stay connected. And, of course, you can always try to fix the network device yourself - as you can see, there is nothing too difficult about it.