Menu
homeInternet

How to install the previous version of Android on Samsung. How to return the old version of VK on Android? How to restore stock firmware on any Samsung device

TO original state, you can use the firmware reset code. When using it, all data that is and is not part of the firmware will be erased. You can find out the code by contacting the representative office of your manufacturer. Find it on the official website. Provide your IMEI, then enter the received code.

Download the firmware and install the flashing software. You can find these components on your phone manufacturer's fan sites. Install only the one firmware, which is designated as factory. Make sure your phone battery is fully charged. Do not disconnect the phone under any circumstances until a message appears indicating that the software update is complete. Do not use your phone or turn off your computer until the operation is completed. Try to use only software that is available, otherwise it is advisable to contact specialized service for cell phone repair.

Sources:

  • How to return the “old” Android firmware?

Returning the phone to standard firmware allows you to get rid of problems with operation software, various freezes and device failures. In this case, after resetting the settings (Hard Reset), the device’s firmware will return to its original state, in which it was installed by the manufacturer.

Android

Reset to factory firmware phone on Android based is performed using the appropriate setting in the device menu or using a key combination (if it is not possible to turn on the phone). To reset the firmware of a phone that is turned on, go to the “ ” menu of the device. Then tap About Device and select Factory Reset. The name of the menu items for calling the reset operation may vary depending on the version operating system device and the manufacturer who made changes to standard firmware. If necessary, enter security code to reset the software, then confirm the operation.

If you want to return the phone to its factory state if it is impossible to start it completely, hold down the phone key combination, which can be described in the instructions for using the device, on specialized forums or on the official website of the device manufacturer in the section technical documentation. Most devices reset the version of their operating system and return the settings to factory settings when using a combination of the unlock (power) key, menu and volume down button. It is worth noting that some phones use the volume up key to reset settings. In this case, the power button can be released after the smartphone starts up, and the volume and menu keys should be kept pressed for a few more seconds before the formatting process begins.

To reset iPhone settings You can also use the corresponding menu item. To do this, go to “Settings” - “General” - “Reset” - “Delete all content and settings.” Confirm the operation twice and wait for the phone to return to its factory state.

You can also reset your device using iTunes program. Connect your phone to your computer and open iTunes. After that, select the device name in the right top corner programs. In the "Review" section, click on the "Restore" button. Remember that resetting the firmware will result in the loss of all saved settings and data, and therefore it is recommended to make a backup copy before carrying out the operation.

Windows Phone

Resetting the phone firmware Windows Phone is also performed using the corresponding function, which is available in the device settings. Click "Settings" and go to the "Device Information" section, then select "Reset settings". Confirm the operation twice and wait for the notification that formatting is complete to appear.

Some models Windows phones Phone can be returned to factory settings without having to turn on the device. To do this, hold down the Volume Down button simultaneously with the Power key. Release the power button. Once you see the phone logo, release the Volume Down key. Then press the volume up, volume down, power buttons, and then volume down again. After this, wait until the settings are reset and the corresponding notification appears on the screen.

Many users are eagerly waiting for manufacturers to release a new firmware update for their Android smartphone. As a rule, they fix bugs of previous versions of the OS, add new features and optimize the work in general. But what should you do if, after the update, your phone starts working worse than it did initially? Let's take a closer look at why and how to restore your phone after unsuccessful firmware Android.

Self-firmware of an Android device is always a risky undertaking, the consequences of which are borne by the user himself. Unless, of course, we are talking about installing a standard official update over the air or using proprietary program on the computer. In this case, responsibility for the consequences of the update lies with the developer, so you can safely contact the warranty service center. But before you panic and everyone possible ways try to restore original firmware, you need to understand whether a failure actually occurred. There are several main reasons that can lead to failure when flashing:

  • Emergency interruption (the phone was disconnected from the computer, the smartphone battery was low, etc.)
  • Inappropriate OS version.
  • Incorrect settings, user errors.

Any of the above problems may cause incorrect operation mobile device, permanent system failures etc. In the event that the phone does not turn on or begins to work worse than before installing the update, you need to start active actions on restoration.

How to roll back firmware

At failed update The question arises, how to return the old OS? Depending on whether you used the official or custom version of the firmware, the recovery options will be different. Let's consider both cases in more detail.

Failure caused by installing official firmware from the developer

This does not happen often, but in some situations the phone may not work correctly even when an official update is installed. Roll back and restore the factory version of the mobile phone operating system in in this case quite simple. To do this, the user will need a computer with installed drivers to a mobile device and a special program. Depending on the manufacturer of your smartphone or tablet, the required utility must be downloaded from the developer’s official website. Further actions Installing native firmware can be written in two points:

  • Connect your mobile device to desktop computer or laptop via USB cable.
  • Run the program, find the recovery partition in it and start rolling back the changes made.

Website with Samsung program Kies

After this, the program will automatically search for and install the required OS version and return the mobile phone to its original state.

Program interface on a computer

Crash caused by installing custom (custom) firmware

In this case it will help re-update from Recovery mode. In order to enter recovery mode, you need to turn off your mobile device and simultaneously hold down the key combination. In most cases, these are the buttons: power + volume down.
Management in Recovery menu carried out by the same keys: volume and power. In the case when you made a backup of the system before flashing, then just select the “Backup” item and restore" If no backup was made, the restoration procedure will take a little longer. You need to do the following:

  • Reset all settings by selecting “ wipe data/factory reset".
  • Format the cache partition by clicking on “ wipe cache partition".
  • Try to reinstall the firmware by selecting “install zip from sdcard” and clicking on the file with a pre-created archive on the memory card.

After this, the phone should work normally. You can also try downloading and installing another version of the OS in a similar way. For more information on how to roll back newly installed firmware, see the training video below.

How to return factory firmware?

If you want to return the factory version of the OS by correcting the accumulated system errors, then you can do this directly from the main settings menu of your smartphone. To do this you will need:

  • Turn on your mobile device, go to the main settings (via the application menu or by clicking on the gear icon in the upper right corner when lowering the curtain).
  • Find the “backup and reset” tab, then click “reset settings” ( Hard reset) and agree to the necessary conditions.

After successfully completing this operation, your phone or tablet will return to its factory OS settings. We recommend that before resetting the settings, you back up important data or save it to a separate media, as it will be deleted from memory.
The training video below shows how to perform a factory reset. mobile gadget, running on Android OS bases, up to factory ones.

Upgraded to new version iOS, you may notice that you will not like the firmware. In this case, there is an excellent solution - roll back the software to the optimal version, in your opinion. That is, if you updated to, for example, IOS 10, then you can easily install it on your iOS device 8 using the instructions below.

When is it necessary to rollback iOS?

The reasons for installing an older version of the operating system may be the following circumstances:

  • With new firmware versions, the design changes, and not all users may like the new design.
  • The most common reason is the appearance of freezes and glitches. Happen similar problems for two reasons: either the new version of the firmware became available to users in a too crude form, with errors in the code and shortcomings, or the device that was updated was already outdated for the loads created by the new version of IOS.

Please note that it is not possible to roll back any device for any version, detailed information You can view which device to which firmware version you can roll back to on the following website - http://appstudio.org/shsh. All data is located in table format.

How to roll back iOS to a specific version on an Apple device

Before you begin the process, you need to prepare the following things:

  • iTunes installed on your computer and updated to the latest version.
  • The version of the software you selected, in IPSW format, is downloaded to an easily accessible folder. You can download it from trusted Internet sites that distribute free of charge iOS firmware, for example, by following link- http://appstudio.org/ios. Download the firmware strictly for your device model, otherwise problems will arise during installation.
  • A USB adapter that will connect your device to your computer.

If all the above conditions are met by you, then next step will prepare the device itself for the rollback process.

Saving important data

Please note that when you roll back your device, all data, applications and media files from it are permanently erased, so it’s worth taking care of them. There is an option that allows you to delete files from the device, it will be discussed later in the article, but it is no less stable. You can save everything you need using a backup copy created as follows:

Disable password

Another important point is to disable the password and Touch ID, if it is supported and enabled on your device.

Deactivating Find My iPhone

Before any actions with the device’s firmware, you must disable the “Find iPhone” function, since, otherwise, iTunes simply will not allow you to perform any actions:

Firmware rollback

If all previous preparatory work have been carried out, then you can begin the rollback itself. It doesn't matter which device you're downgrading from, or from which version of iOS you're downgrading to.

  1. Connect the device to the computer using a USB adapter.
  2. Log in to the system.
  3. Go to your device's settings by clicking on the icon that looks like a phone or tablet.
  4. Clamp Shift button on the keyboard if you are using Windows, or Option button, if you are using Mac OS. Without releasing the key, click on the “Restore” button.
  5. A window with folders will open; you need to specify the path to the firmware that you downloaded earlier.
  6. Wait while iTunes extracts the software from the firmware and installs it. The process can last from five minutes to half an hour, do not disconnect the device from the computer or interrupt the process with any actions, otherwise the device may enter endless recovery mode.

Rollback without data loss

This rollback option also exists; it allows you to rollback without losing the data on the device. To do this, in point 4 of the “Rolling Back Firmware” section, you need to click on the “Restore” button and the “Update” button. All other steps are completely the same. The only thing worth considering is that the execution full recovery, that is, resetting the system and installing it from scratch is safer, since the chance that previous version some elements will remain much lower.

Video tutorial: How to downgrade iOS version

Third party rollback programs

If for some reason the iTunes method does not suit you, then you can use the third-party program RedSnow. It is distributed free of charge for both Windows and Mac OS on the official website of the developer - http://redsnow.ru.

  1. After downloading and opening the program, select the Extras section.
  2. Click on the Even More button.
  3. In the menu that opens, go to the Restore block.
  4. Click the IPSW button to specify the path to the previously downloaded firmware.
  5. The notification that appears will ask you whether to cancel the modem upgrade or not. Click on the “Yes” option.
  6. A window will open in which you will be warned that the device will now need to be put into recovery mode, close it.
  7. Connect the device to the computer using a USB adapter and enter it into DFU Mode. How to do this is described step by step in the program itself.
  8. If you have not performed such rollback operations with this program before, click on the Remote button so that it will automatically find the necessary hashes on its servers.
  9. Done, now all you have to do is wait for the process to complete. The device will automatically update to the version you downloaded and turn on, after which you will have to go through the initial setup process.

Is it possible to roll back individual applications?

If the purpose of your system rollback is to install older versions of applications, then you should not carry it out, since there is a better option - use a special App program Admin. You can download it directly from App Store for free. Thanks to this application, you can view all available versions applications installed on your phone and roll back to them. To use the program, just select the applications to roll back and enter the unique version number to which you want to roll back the selected application.

So, installing an older version of the software is possible on all devices from Apple, but you can’t roll back to any version, but only to those that have the SHSH signature. The process can be done via official application iTunes and via third party programs. The main thing is to download correct version firmware and do not interrupt the update process until it is fully completed.

The market for mobile products is structured in such a way that as new versions of the Android OS are released, smartphone manufacturing companies implement their support in their own, both recently released and already proven models. How it works? At the time of purchasing a new mobile product, it is available basic version system installed by default. After some period of time, Google releases new release Android. After six months or a little later, depending on the geographic region, when the new version becomes tested and stable, you can install it on your smart phone. As a result, you get a new one, modern interface, support for new applications and more settings and customization. In this material we have compiled a detailed guide for you, how to update Android on your phone.

What is a software update on Android and why is it needed?

You need to be aware that as a result of updating or rolling back the operating system, all data stored on the phone will be irretrievably lost. Be sure to do backups all the data you need ( address book, notes, photos) to a reliable external media before taking any of the steps in this guide. It could be external storage, hard drive on a PC (as a last resort, a memory card, but not advisable).

One more nuance. Since updating the operating system will require certain time(from 5 to 10 minutes, and sometimes more), be sure to charge the phone to 70-80% of the total battery capacity so that the update procedure is not interrupted due to problems with the phone’s battery.

Automatic Android update

The most accessible and the least the hard way updates. Go to the options menu and select the “Phone Information” section. Here we go to the “Software Update” item. On your device, this section may be located somewhere else, so you may have to go through the settings.

Now tap on the “Update” button, having previously set the option to download updates only via Wi-Fi, so that the update does not “eat up” all your money from your account.

Option in settings menu for automatic update OS

When all the data from the manufacturer’s server has been downloaded, in the menu that appears, tap the “Install” button and wait until the device reboots.

Since using the method described above you can only update your mobile device to the minor release build, you should also use special utility from the manufacturer (for Samsung gadgets– this is Kies, for LG – PC Suite, etc.) or update “over the air” (most of the companies that produce smartphones or tablets have such a proprietary feature).

Latest Android update, if it is already available on the server, you can download it to your device at any time using just such a program.

Manually updating Android firmware

Almost all service centers use this method, but we can easily update ourselves, using only available means. Applies to update system application Odin. You can download it on many web resources (for example, on the same w3bsit3-dns.com). Using this technique, you can only install a new version of the official firmware, but not a custom one.

1. download the Odin program. We need version 1.83 (or later) - it is very popular among technicians and is suitable for the vast majority of products

2. find and download an archive on the Internet with the firmware we need. After extracting the contents from the archive (you will need it first), you should have 3 files on hand: PIT, PDA and CSC

3. connect the smartphone to the PC. It is critical that the phone is detected correctly in Windows

4. launch Odin. If the device connection was successful, in the program yellow the port name will light up in the corresponding field

Indication of successful connection of the device to the PC for updating in Odin

5. turn off mobile device and put it into Download Mode by pressing the home, power and volume down keys at the same time

6. Confirm activation of Download Mode by holding down the “Volume Up” key

7. in the central Odin window, select the downloaded files so that they correspond to the PIT, PDA and CSC objects

8. In Odin, click the Start button and wait until all files are updated.

If the Android system update went smoothly, a field with the inscription PASS in green will appear on the application screen.

Successful system update via Odin

Rollback to previous version

Perhaps you updated to one of the latest versions and were not satisfied (the phone is slow, errors appear frequently, you need to reboot, etc.). If necessary, you can roll back to any version you need. How to roll back?

1 way

Suitable for those who want to return the basic official factory firmware installed in the device at the time of its purchase in the store. This is quite easy to do. Go to the device settings and select the item responsible for resetting the settings (this can be “Privacy” or “Backup and reset”). On the test phone, this function was available in the “Backup and reset” menu in the “Personal data” category.

Section in the options menu designed to reset the device to its factory state

  1. We go to this section of the menu and stop at the “Reset settings” item.
  2. A form pops up warning you that all data from the gadget will be deleted. If the backups are already saved in a safe place, feel free to click “Reset phone settings”.
  3. The phone begins to reboot. After 5-10 minutes it will boot again, this time with a clean basic system on board.

Method 2 - reset to factory settings (hard reset)

  1. turn off the phone/tablet
  2. simultaneously press and hold down the “Volume Up”, “Home” (bottom center) and “Power” buttons. The Recovery menu opens.
  3. Using the volume keys, select the “wipe data/factory reset” item.
  4. press the power key to confirm your choice
  5. in the next menu you need to confirm your decision. Select “Yes – Delete all” user data» via the volume control keys
  6. Press the power button again. The main menu pops up in front of you again
  7. Using the power key, select “reboot system now”

All is ready. Next time the factory version of the OS will boot.

How to rollback if a custom version of Android is installed (Cyanogenmod, MIUI, Paranoid Android)?

If you installed a custom ROM, return official firmware can be done the same way manual update, - using the one already mentioned in the review Odin programs. First, you will have to search the Internet for files with the firmware you need, individually suitable for your smart model. Perhaps, best resource For search - mobile portal 4PDA, here you can find any firmware for almost every phone model.

  1. connect the mobile device to the PC
  2. launch Odin
  3. turn off the phone and enter it into Download Mode. To do this, press the home key, power key and volume down key.
  4. when the phone is booted, press the volume up key to activate Download Mode
  5. on main form Odin select downloaded files as matching PIT, PDA and CSC
  6. in Odin, click the Start button and wait until all the files are updated.

The successful completion of the rollback procedure will be indicated by a green field with the inscription PASS at the top.

Information about a successful rollback to a previous version via Odin

How to update Play Market on Android

The first time you boot a fresh system, you have to configure everything again: account, language, mail, time zone, network, etc. The same goes for the store. Google Play Market. An update to this module will become available immediately after setting up a Google account on your mobile device.

Proposal to connect your Google account to the system

Once you enter your account authentication information Google posts, Play Store components will appear in the notification panel, which can be updated exactly like any other applications.

Component updates Play Market

If you are using custom firmware, you need to go to the store itself at least once to update. After this, an update for the service will appear on the display.

Answers to readers' questions

When will the new Android update be available?

Answer. Since a certain time passes between the immediate release of a new version of Android and the physical possibility of installing it on a gadget (from 2-3 to 6-8 months), you need to be patient and follow the announcements of companies. Among the first products with marshmallow support are devices from the Nexus and Android One. As for the Samsung brand, this month they promise updates to 6.0 for following models mobile devices: Galaxy Note 5, Galaxy S6 edge+; in January 2016 – Galaxy S6 and Galaxy S6 edge; in February – Galaxy Note 4 and Galaxy Note Edge.

Now about others trademarks. Sony announced an update for all current devices Xperia line, starting from the Xperia Z Ultra GPE released in 2013 and ending with all models of the Z5 series (both Premium and budget). The range of devices from LG is limited to the G4, G3 and G Flex2. HTC, in turn, limited itself to only two last generations devices own production: One M9/E9 and One M8/E8. In addition, companies such as Motorola, Xiaomi, Huawei, Asus, OnePlus and ZUK promise to equip their flagship devices and mid-level devices with Android 6.0. This list is not yet final. Subsequently, we will keep you updated on the latest announcements.

I have Huawei phone U9500, and I didn’t know or didn’t understand that I needed to update the version. Now I have Android 4.0.3, how can I update the firmware to the new version, please help!

Answer. Update process Huawei firmware described . In short, there are two ways to update the Huawei U9500 firmware.

  1. We take out the battery and hold down the volume buttons on the phone. After this, the Android update process will begin.
  2. Go to Settings -> Storage -> Software Update -> SD Card Update, launch the Android OS update.

I have a MFLogin3T tablet and until now I didn’t know that it was possible to update the system. I read it on different sites, tried it, but it doesn’t work. I have Android 4.4.4. How to update the Android version?

Answer. The easiest way to update your phone is through Settings - Options - About device - Software update. IN different versions Android OS partition location may vary. Thus it is fulfilled standard update on Android, download the official software. This is the safest and easiest way.

I have Samsung Duos, version 4.1.2 I can’t update the operating system to a higher version. Please help me update Android on my phone!

Answer. First you need to find out if it is possible to update Android on your phone to version 5.x. It turns out not. The fact is that specifications your phone does not allow you to install newer ones Android versions.

On the other hand, you can download the update for Android from the 4pda forum, where they post modified firmware. But we wouldn't recommend setting it to enough old phone such updates if you do not have the necessary skills and are not prepared for a drop in the performance of your mobile device.

Lenovo A1000, Android is not updated. I'm trying to update version 5.0 to the newest one. At first everything goes well, but then he writes “Error” and shows an opened Android with a red triangle hanging above it with exclamation mark. What should I do? How to update the OS to the latest version?

Answer. Why isn't Android updated? The fact is that Android 5.0 is latest version The OS to which you can officially update the firmware on your phone. At least that's what users of the 4pda forum say. Of course, you can update your phone by installing custom firmware, but no one guarantees stability after such an update.

Has gained NTS one m7. I can't update Android 4.4.2. The device does not find the software update, how to solve this problem? How to update it?

Answer. NTS one m7 can be updated to at least Android 5.1. If you can't install official update, try downloading custom firmware on the 4pda forum. Instructions for updating on this device are also collected there (see). In this topic you will find solutions to the problem if the Android OS is not updated.

I have a Moto x play, I don’t want to update the system, the message “Android 6.0.1 software available” constantly appears, which is wildly annoying. Please tell me how to remove this message so that it doesn’t appear again. I even contacted the support service of the smartphone manufacturer itself, All the instructions they gave me did not bring any results.

Answer. To disable firmware updates, go to Android settings, section About phone - Software update and disable updates by unchecking the corresponding item.

A year ago, the memory on my device died (the phone stopped turning on), it was replaced, but the firmware was not the original one (it’s no different, only the yellow Kernel inscription appears in the corner on the startup screen). Naturally, there are no updates for this firmware. Can I use Kies to roll back Android (install the native one) and update it?

Answer. In order to roll back the update, you need to reboot the phone in Recovery mode, select wipe data/factory reset, wipe cache partition and reinstall the firmware from the zip archive previously downloaded to the memory card. You can find the official firmware both on the manufacturer’s official website and on the 4pda forum, in the section with the corresponding name of your mobile device.

Acer tablet Iconia A1-810. I don't have firmware updates... I click system update and it says "your device requires an update." How can I “force” it (forcefully update the Android system) or update it myself?

Answer. This model The tablet was released about 5 years ago, it does not support new versions of Android, so the manufacturer does not provide firmware updates. You can search for custom (unofficial) firmware on the 4pda forum, but we do not recommend installing them - it’s better to purchase new tablet than experimenting with firmware to the detriment of the stability and speed of the device.

The build number does not open on Android. I called for a long time. What should I do?

Answer. Number Android builds initially available for viewing in the “About smartphone” (“About tablet”) section. If you go turn on hidden settings(section “For Developers”), you can activate them by clicking on the build number, just 4-7 clicks on this line.

Surely you have heard about the Android operating system, unless you yourself are the owner of a device running this shell. This platform has appealed to a good portion of gadget owners and is the most common OS among mobile devices. Since 2009, when the first version of the “robot” was released, the developers have not stopped improving and modifying their brainchild. New versions and updates are released regularly. But do you always need to update your device and how to return it? old version"Android" after the update? We will talk about this in this publication.

Why are updates needed?

First of all for proper operation systems. Developers optimize performance, improve the interface, correct lags, because it is almost impossible to release a perfect system right away, and minor faults will only be noticeable during its implementation. active use. In most cases, you can find out about the availability of an update using regular message, which will appear in the notification line. You can upgrade by going to the update center, downloading and installing the new version.

Why might gadget owners be unhappy with the update?

In most cases, after the update procedure, the device should work faster, and all shortcomings should become a thing of the past. All that users can complain about are some changes in the interface or, for example, the disappearance of shortcuts from the desktop (accordingly, the applications themselves disappear). This happens because installed programs are already outdated and simply do not correspond to the new firmware.

New versions of applications or their analogues can still be found on the Play Market, and trying to return previous version OS due to the loss of old applications is a rather stupid idea. What else can irritate owners in the new firmware version is the appearance of some programs that cannot be removed. For example, these could be new services from Google. And then all users begin to think about whether it is possible to return the old version of Android. But most of all those who want to return to old firmware among those who tried to reflash their device themselves. Here, a huge variety of problems may appear, to the point that your gadget may turn into a “brick,” that is, stop showing signs of life altogether.

So before performing such manipulations, make sure that you have enough knowledge and experience, and best of all, contact a professional. Reflash the device only in extreme cases, when you cannot do without it, because such a procedure completely voids your warranty. But you can still return the previous version.

How to return to the old version of Android after updating?

First, come to terms with the fact that standard system resources do not provide a system rollback option, such as in the Windows OS. Accordingly, when you return to the old version, all installed programs and personal files will be deleted. Therefore, immediately before the procedure for returning the old version, make backup copies of all important documents, files, phone numbers, and so on. Get ready to say goodbye to custom settings, saved accounts or applications, they will be erased all except the built-in ones.

Next, you will have to perform a factory reset yourself. How to do this depends only on your version of the operating system, but most often this item is found if you go to “Settings” and “Recovery and reset”. This parameter can also be found in “Confidentiality”. In any case, finding a factory reset will be easy. Next, you will need to perform a series of actions that are a little more complicated, that is, enter recovery. And how to return the old version of Android using it - read on.

Login to recovery

"Recovery" is a special boot mode on Android, with which you can reset settings or flash the system. If you buy gadgets in trusted certified stores and with an already installed OS, then they should have the stock “recovery” mode. How to enter recovery depends only on your device model. The most common combination is the power button and the volume down key.

For example, if you don’t know how to return the old version of Android to Lenovo, then this combination will work for most of their devices. I would like to note that before entering recovery, you need to turn off the phone. If you are looking for how to return the old version of Android Sony Xperia, then here you need to press three buttons: those that we have already named, and the camera button. More detailed instructions for various models you can easily find in the open spaces world wide web. But what to do after entering boot mode?

How to return the old version of Android after updating through recovery mode?

You can navigate through the menu using the " key" highlight", and to select a specific item you need to press "select". this mode there is no need, if you understand it well, it becomes clear that there is nothing complicated. Now look for the line with " wipe data / and select it. A new menu will open in which you will have to confirm the action. Afterwards, wait for the reboot and the OS will return to factory settings.

Charge your smartphone

What is worth noting first of all is that before starting this procedure you need to charge the device well. It doesn’t matter how long it takes to roll back the system and how long the gadget will reboot after that.

If during such manipulations in the “recovery” mode the device does not have enough charge and is unable to complete its task, then, most likely, problems with its further use cannot be avoided.

The same goes for self-flashing phone. For some users they disappeared or did not work individual functions system, up to the loss of functionality of the touchpad. In some cases, the firmware did not install at all and it was simply impossible to enter the OS. But even then recovery helped again. If you cannot enter this mode or it simply does not exist, there are a number of simple utilities for flashing this mode directly through the operating system. Sometimes you may need a PC for this task.

We told you about how to return the old version of Android after updating. Treat your gadget with care and it will serve you for a long time.