Huawei mediapad 7 lite firmware 4.4

Sometimes there are situations when the tablet’s performance is not satisfactory or it does not show obvious signs of life at all. It would be necessary to flash it, but how to do it? By and large, this process is not a complicated procedure. The main thing is to do everything correctly and I will try to help you with this...

And so let's begin... The firmware can be downloaded from the official website Huawei - S7-931u_FIRMWARE_Android4.0_C001B019SP19_General_Version_05011CYW.zip . Unpack the archive. In folder update are the folder dload and instructions ( MediaPad 7 Lite SD-card Upgrade Instructions) in English. We connect the tablet to the computer using the cable included in the kit. In the tablet settings select Media device (MTP) or item - USB drive.

Go to your computer and copy dload to the root folder SD-cards. I used the one that was on the tablet. The only warning in this case is SD card must be formatted in FAT or in FAT 32. Then, after flashing, delete or move dload to another directory to prevent the installation process from starting again the next time you turn on the tablet. It's better to use another one. I have one free at hand SD-there was no card. After copying is complete, disconnect the cable from the tablet, check the charge level (35% will be enough), and turn off the tablet. Just in case, remove the SIM card (if there is one) from the slot and turn on the tablet again. The firmware process will begin, lasting 10-15 minutes. If there is such a screensaver, the firmware ended with an error, remove SD-card and reboot the system. Then you can try to start the process again...

The appearance of such a screensaver indicates the successful completion of the firmware, remove SD-card and the system reboots.

Then the parameters will be automatically configured and the system will reboot again. Next, set the language - and here click on the line - English and from the dropdown select - RRussian .

Then set the time, date and time zone, you will be prompted to log into your Google account and other unimportant little things...

At this point the firmware process is completed... for which we can congratulate ourselves!!!

The only thing is that with this firmware you need to deal with the keyboard. Unlike the firmware HUAWEI_S7-931u_FIRMWARE_Android4.0_C170B003_Russia_Channel here is the keyboard from Huawei IME does not work and you need to additionally configure the input of English and Russian layouts on the settings tab - Language and input(switch on the bottom panel of the screen by clicking on the small keyboard icon) or set the Russian Keyboard to Play Market.

Video - Huawei MediaPad 7 Lite - tablet firmware process (method 2)

Users of this gadget sometimes have to be puzzled by this question in the event of serious malfunctions in the operation of their favorite device, when any other measures no longer help. And sometimes this is done simply to improve the software on the tablet. The firmware procedure is generally not complicated, and if you follow a certain plan of action, there are no problems.

And so let's begin... There is only one link to the firmware for MediaPad 7 Vogue, which can be downloaded from the website Huawei — S7-601u Firmware(S7-601u, Android 4.1, C232B003, General Version) . After downloading, you need to unpack the archive. The archive contains the folder - sdcard_upgrade (with folder dload inside) and instructions (S7-Vogue SD-Card Upgrade Instructions) in English. Connect Huawei MediaPad 7 Vogue to the computer using USB - cable included in the kit. In the tablet settings, shave Media device (MTP) or item - USB drive. Copy the folder dload to the root folder of the SD card. Make sure the SD card has enough space (more than 2G) to copy the update file and is formatted in FAT 32.

1. Make sure that the tablet is turned off, and first make sure that the battery has more than 30% charge or connect the tablet to the charger.
2. Insert an SD memory card.
3. Press the power button to turn on the device. The tablet will turn on and the firmware update process will begin. If you follow the instructions correctly, the following window will appear on the device screen:

4. Once the update is complete, OK will appear on the screen:

5. After the firmware is successfully installed, remove the memory card and hold the power button for 10 seconds to reboot the device. And then the tablet will update the system configuration. After the next reboot, the first login will occur, where you must first configure the language - and here click on the line - English and from the dropdown select - RRussian . After completing the remaining necessary steps, the tablet can be used as usual.

Please note: Do not remove the memory card or press the power button until the update installation process is complete.
If the update fails during an update

repeat the update procedure from the very beginning.

User guide Huawei MediaPad 7 Vogue (Lite II) in Russian can be downloaded from this link -

In front of you detailed step-by-step instructions on how to flash a Huawei MediaPad 7 Lite tablet. Our editors have chosen the most suitable method for flashing the firmware for this Huawei model. If this instruction does not give any results try flashing using another method: TWRP Recovery, ROM Manager, Fastboot or classic OTA.

Warning! After flashing the device, all your data from the internal memory will be erased, so to save your contacts, settings and applications, first save all data from the tablet.

Installing the system using CWM Recovery 1. Charge the flashed tablet at least 80%. 2. We save all data that cannot be lost from a flash drive, SIM card and tablet memory. The SIM card (if any) can be removed. 3. We place the necessary firmware into the tablet’s memory. The firmware file must be in archive format zip. You can select and download the firmware. 4. All Huawei tablets have Recovery from the manufacturer, so we change it to ClockWorkMod Recovery. We do this according to the following instructions: Install the application from Google Play on your tablet. Launch it and grant Root rights. If there are no root rights on the tablet, we get them using . In the list of options, select “CWM Recovery”. Then the application will show a list of available Recovery. In the example, Rashr showed 2 options: ClockworkMod with support for taps on the screen and the classic version (controlled by the volume and power buttons). You will be prompted to download. Click Yes. Then the CWM Recovery image for the tablet will begin downloading. A notification will appear that the firmware was successful and you now have a modified recovery installed. We immediately go into it, to do this, click “Yes”. 5. Ready. If you have already installed ClockworkMod Recovery, then simply enter it by pressing for 3-5 seconds any of the combinations: - Volume up + power button - Volume down + power button - Volume up/down + power button + "Home" - Volume up + volume down + power button Movement in the Recovery menu is carried out using the volume buttons, and confirmation of the choice with the power button. Before installing the firmware, you must first do a factory reset. Therefore, select the item in the menu.
6. wipe data/factory reset Next, simply confirm that you agree to reset:.
7. Yes – Wipe all user data Now in the main menu of Recovery select.
8. install zip After that select.
9. Choose zip from /sdcard
10. Navigate to the folder where you saved the firmware zip file and select it. A confirmation message will appear. Select.
11. The firmware installation process will begin and at the end the message will appear Install from sdcard complete. The firmware is finished. We return to the main menu of CWM Recovery and reboot the tablet. For this we choose reboot system now.
12. Ready. The tablet will start loading from the already installed firmware. Other materials