Bootable USB flash drive using Windows 7. Creating a bootable Windows flash drive. Creating a bootable USB flash drive using Rufus

Big number modern models laptops are produced without optical drive. In such conditions, a bootable Windows 7 flash drive becomes the main method and most used installation tool operating system.

To create a bootable Windows USB flash drive, you must have:

ISO image of the operating system;
Removable media with a capacity of 4 GB;
A motherboard that supports booting from a flash drive.

Important Note: The drive should be connected via USB interface 2.0. Windows 7 does not support USB 3.0 (it is usually colored blue inside) during installation, and therefore, when trying to boot through this interface, the user will see an error message.

Preparation programs bootable flash drive Windows 7 can be distributed either for free or for a significant amount. Usage free software V in this case absolutely justified - the utility will cope with its functions perfectly, and you will solve all your problems without spending anything but time.

Let's take a closer look at how to make a bootable Windows 7 flash drive using utilities specially designed for this.

Important Note: Some programs require the user to have administrator rights to perform tasks. To get them, just right-click on the utility shortcut and select “Run as administrator”

UltraISO program

The program has a Russian interface, which is very important - you will not just press buttons sequentially, relying on your knowledge of English, but you can thoroughly understand which process is launched after the next action with the utility.

Any user can create a bootable Windows 7 USB flash drive using the ultraiso program. You just need to follow the simple step-by-step instructions:

Run the program as administrator. Load the operating system image into the window that appears. It can be written in ISO format, MDF or NRG. Using the Open button or similar point in the File menu, add it to the application work area.

The next step in creating a bootable Windows 7 flash drive is writing the image to disk. This is done by clicking on the corresponding item in the “Boot” menu.

The recording window will appear. Check that the line Disk Drive the name of your flash drive and its letter were indicated. The recording method should look like USB-HDD+. If all parameters are specified correctly, click the “Record” button.

A warning will appear on the screen stating that all data on the removable media will be destroyed. Continue the process of writing a bootable Windows 7 USB flash drive by confirming your intention by clicking Yes.

UNetBootin program

The main window of the program looks quite ascetic. Here you need to select Disk Image, the letter that is assigned to the removable media. The ISO image address is specified manually. After adding the image, files are extracted and copied to the flash drive.

Other programs for preparing a bootable Windows 7 flash drive work similarly, such as USB/DVD Download Tool, Rufus, the operation of which will be described below, etc.

Creating a bootable USB flash drive for Windows 7 is not enough - the image recorded on it still needs to be opened somehow. If the system continues to work, then this should not cause any problems. However, if nothing starts already, you will have to go into BIOS settings.

Important note: Depending on the year of manufacture, BIOS versions vary. They also differ in appearance, but the names of the menu items remain virtually unchanged.

Having opened the BIOS by pressing the Del, F2 or other key specified in the start boot window, you need to go to the Advanced tab BIOS Features. Here the devices are placed in the order they were launched. Simply put, first the system, for example, loads a CDROM, then HDD, then USB-HDD.

Since we made a bootable Windows 7 flash drive, and now we want to launch it, we should put booting the USB-HDD first. To do this, click on the first line Enter key to open a menu showing all connected devices. Then select USB-HDD from the list provided. In second place, put the download from hard drive(HDD), let CDROM remain in third position.

Possible problems with loading media through BIOS:

The motherboard simply doesn't support booting from external storage(if it was developed before 2003, this is a very real reason);
Incorrect bootable windows 7 usb flash drive. Perhaps mistakes were made during its creation. To rule out this option, test the media on another computer where the motherboard clearly supports reading removable drives;
The USB controller is disabled in the BIOS.

If the system is installed on a computer, it is recommended to immediately connect the drive through the port located directly on motherboard, bypassing the connectors located on the front panel of the system unit.

If the UEFI interface is installed

UEFI is replacing the traditional BIOS - new interface, which copes better with modern hardware. Essentially, UEFI performs the same functions as BIOS, providing a pre-boot environment for the OS.

However, creating a bootable Windows 7 uefi USB flash drive is somewhat different from the usual procedure for preparing installation removable media.

There are two ways:

Use of software;
Manual drive setup.

Let's consider each option in detail.

Rufus program

Why this particular utility? It has several advantages, among which are free, portable, high speed work, user-friendly interface and support for the Russian language.

Note: the algorithm of actions indicated above is also suitable for creating installation media with Windows 8.

The main program window looks like this:

As you can see, there is nothing complicated here. All fields are very clear and are usually filled in automatically. But so that the question of how to make a bootable Windows 7 flash drive using this program is studied thoroughly, let’s briefly go through the points presented in the main window:

The device is your flash drive on which you plan to write the operating system image;
Partition scheme - leave GPT with UEFI by default;
The file system and cluster size are also set automatically. They should not be changed;
Field Create boot disk allows you to select the path to the ISO image.

After specifying and checking all the parameters, all that remains is to click Start, starting the process of copying files. The recording speed is approximately comparable to the speed regular copying information on removable media.

Considering that the program creates a bootable USB flash drive, a higher figure is simply impossible.

Manual setting

If you don’t want to download Rufus or for some reason creating a bootable Windows 7 flash drive does not happen or ends with an error, internal Windows tools will come to the rescue.

Important note: the steps described are for 64-bit versions of Windows 7, 8 and 8.1. Users with 32-bit version are recommended to use software method entries listed above.

Run command line on behalf of the administrator. This can be done using context menu called by right-clicking on the command line shortcut in standard programs Windows.

Enter following lines in the window that appears:

diskpart;
list disk.

A list of connected drives will appear. Find your flash drive (you can do this by its size). Look at the number she identified - you will need it for further work with the carrier. For example, let's take number 6 (it may be different for you).

So, the order is as follows:

Select disk 6 – select a specific disk with which all further manipulations will be performed;
Clean – the media is cleared of data written to it;
Create partition primary – a partition is created;
Format fs=fat32 quick – the created partition is formatted into the FAT32 file system;
Active – the section is marked as active;
Assign – assigns a name or connection point;
List volume – check the correctness of your actions. Pay attention to the letter that is assigned to your carrier. Remember it;
Exit – exit from Diskpart.

For clarity, look at the picture - there is nothing complicated here.

After preliminary preparation All that remains is to copy the contents of the image to the media.

Since we are making a bootable USB flash drive for Windows 7, we will have to use additional software to open the image (in the eighth version of Windows, you can mount the image directly in the system). It's good if you have it installed on your computer Daemon program Tools. With its help you can mount the image in virtual drive, go into it and copy all the contents to the flash drive.

If you don't have Daemon Tools, you can use functionality WinRAR archivers or 7Zip. To do this, you need to open the ISO image through these programs, and then unpack it directly to removable drive.

Conclusion

The process of burning an operating system image to a removable disk is not as complicated as it sometimes seems to novice users. The easiest option is to use Russified software, which automatically carries out all preparatory activities. As a result, the ISO image of the bootable Windows 7 flash drive can only be written directly to an external drive.

Most users have problems already at the installation stage, when they have to configure the BIOS or solve some other issues with launching the installation removable media. However, if all of the above steps are performed consistently and correctly, then installing Windows 7 from a flash drive should be successful.

In this article we will look in detail at how to make a bootable USB flash drive for Windows 7. I have repeatedly received questions by email about creating a bootable USB flash drive. Windows flash drives 7, but to convey information, just words are not enough, because there are nuances that you need to know.

Now let's figure it out when you need to create a flash drive with Windows 7. Sometimes while working on personal computer, laptop or netbook, there is a need to download from some external device. This may be needed to recover from any failures, eliminate the consequences of a virus infection, or simply when reinstalling the operating system.

On desktop computers this problem, as a rule, is solved with the help of CD/DVD media, but for other devices, for example, netbooks that do not have a disk drive, using a bootable USB flash drive is often much easier than looking for an external DVD-ROM. I have it, but ordinary users Those who need to install Windows 7 from a flash drive do not need to buy it. Since they will not do this procedure often.

This is what the external drive looks like:

I also want to note that those users who recently bought a computer, laptop or netbook that has USB 2.0 and USB 3.0 ports should connect a USB flash drive with Windows 7 to USB 2.0. Because Windows 7 does not support USB 3.0. Define USB port 3.0 are easy, they are usually colored blue. Look at the photo below:

In any case, you will understand this when an error appears and further installation of Windows 7 will be impossible. Below in the photo you can see how it will look on your monitor 😉:

I recommend that you read the first method and about Windows program 7 USB/DVD Download Tool because they are the most reliable options for creating installation flash drive with Windows 7. The good thing about the first method is that you won’t need to use any programs, all you need is to do this procedure already installed Windows 7. Of course, if it is not at hand, then proceed to method number two.

What you need to know before creating a flash drive

Before starting the process, you need to check that certain conditions are met:

Availability of installation Windows disk 7 or an image with the Windows 7 operating system;
Availability of a “clean” flash drive with a size of at least 4 GB. If there is information on it, it must be copied somewhere, because during the work the USB drive will be formatted and all its contents will be destroyed;
Support boot/select from flash drive in BIOS.

I hope there are no difficulties with the first two conditions, but I’ll say a few words about the third. Actually, installing an operating system is a topic for a separate article, but in short it’s done like this. In the moment bootstrap computer, enter the BIOS settings (on most computers, to do this, immediately after turning on the power, press or hold DELETE key). For one of the most popular versions The BIOS initial menu looks something like this:

Next we go to the menu “ Advanced BIOS Features" and there we find the item "Boot Sequence". It specifies the sequence of devices from which the BIOS will try to boot the computer. After that we look at everything possible options selection in the “First” item Boot Device" If there is anything related to USB there, it means booting from flash drive possible.

After any changes in the BIOS, remember to save using the “F10” key.

So, if all the conditions are met, then you can move on to the topic of the article, how to make a bootable USB flash drive for Windows 7. In this article, we’ll talk about four methods that are the most popular.

Why am I talking about more than one method? Each user has preinstalled programs, and one of the programs may already be on your computer. Why install other programs, because you can use the ones that exist.

By the way, there is an article on the blog about how to install Windows 7 when your computer has a disk drive: "". It will also be useful when you create a bootable USB flash drive and begin installing Windows 7.

The procedure for creating a flash drive via the command line

As I said above, this method is one of the most proven, which is why I want to talk about it at the very beginning of the article.

In the following three methods, you will learn how to make a bootable USB flash drive with Windows 7 using specially created programs with convenient graphical interface. But the Windows 7 operating system has a built-in feature that does not require downloading any utilities, but it makes you work hard by typing a lot of letters on the keyboard.

If any of the readers saw those times when all work on the computer was done by typing various teams V DOS system(white letters on a black screen, English-language commands and no multitasking!), then he will probably experience some nostalgia for the old days.

And for those who believe that Windows has always been graphical, they are deeply mistaken.

All work is carried out in the so-called command mode Windows. To go there, click the “Start” - “Run” button.

Enter “cmd” in the field and click “OK”.

A black screen appears in which we type commands, each of which is completed by pressing the “Enter” key.

To make everything clear, I will provide screenshots after each command. This way you will know that you are doing everything right.

Diskpart – enters disk management mode. You may be required to confirm running as an administrator - enter the administrator password and click “Yes”.

List disk – displays a list of all disks, by serial numbers, starting from zero.

Be especially careful here: all drives are displayed, including HDD partitions. So get it right the required flash drive. It's not difficult: it's listed after all hard drives and has a size you know.

Let's say that the flash drive is number 3. We type select disk 3. For example, if you have it in 4th place, then type select disk 4 accordingly.

Attention! Let me remind you, so as not to make a mistake, you can calculate your flash drive by size (look in the “Size” column).

After this, a message will appear on the screen confirming that you have selected some kind of media. It says: “Disk 3 selected.”

Now, if you are 100% sure that you are selected correct number media, enter the “Clean” command. This command completely deletes all files. I hope that you have already copied all the data from the flash drive; I talked about this at the very beginning of the article.

Type the command “Create partition primary” and press “Enter”. For those who want to know what will happen now - the creation of a primary partition on the disk.

Your section has been created.

Now enter “Select partition 1”.

Enter the command “active” to mark it as active and press “Enter” as always.

Enter "Format fs=NTFS". We format our flash drive as a file one NTFS system. This operation will take a few minutes.

We are waiting for the formatting to finish.

After formatting the flash drive, a corresponding message will appear.

Enter the Assign command. As a result of executing this command, the utility will automatically create new disk, for example, H: and will display an information window with a message about this event.

All necessary actions were performed with the flash drive. Type Exit. We're finally leaving command mode.

Now we have an empty but bootable USB flash drive. All that remains is to copy the files from the Window 7 distribution onto it and you can begin the installation. Making a bootable Windows 7 USB flash drive via the command line is easy, the main thing is to remember all the steps.

UltraISO program

UltraISO - extremely useful utility for working with disk images. It will be useful not only for our current purposes, and therefore I recommend that you familiarize yourself with its capabilities. The program is not free, but it has trial version with quite suitable functionality for our task. Download the program here: and click on the “Free Trial” link.

We select a language from a long list (Russian is also available, among others). Click on any arrow in the “Russian” line (these are links to download from different site mirrors).

After downloading the program, run it to install.

In the next window, read the license text (optional) and select “I accept the terms of the agreement” and click “Next” again. Friends, who reads program licenses? I personally don't ;).

Now you need to specify the location on the disk where the files will be copied. necessary files. Leave it as default and click “Next”.

We receive an offer to create a shortcut to launch in the Start menu. We agree by clicking the “Next” button again.

If you want to add a program shortcut to your desktop, click on the first checkbox.

We are ready to install the program, click the “Install” button.

When copying files is finished, click “Finish”.

If everything is correct, click on “ Trial period..." and go to home screen programs.

Insert the flash drive into your computer, laptop or netbook.

Then go to the “Bootboot” menu and select “Burn image of a tough disk."

After that, click “Format”.

Set the file system to NTFS, FAT32 is selected on the screenshot:

After formatting, click “Burn”.

Select "Yes".

We are waiting for the Windows 7 bootable USB flash drive to be created.

Now you can install Windows 7.

Microsoft utility

Usage special program from Microsoft allows you to make a bootable USB flash drive for Windows 7 in many ways similar to the previous case, except that the utility is free and you can use it as much as you like. It's called Windows 7 USB/DVD Download Tool, download the program using .

To work with the program, you must install Microsoft .NET Framework 2.0. To download it, follow the link.

After downloading the program, launch it and click “Next”.

The next window displays information that everything is ready for installation. We confirm by clicking on the “Install” button that we agree to install this program.

Make a bootable USB flash drive with Windows 7

Where to download the Windows 7 image - watch the video below

Very often when reinstalling windows A bootable USB flash drive with Windows 7 is required. How to do it? The process itself is not complicated, but let's try to figure it out.

2 very different ways method in order to create a bootable USB flash drive from an iso image.

We will analyze everything from beginning to end, we will try to clarify all the details of creating a bootable installation flash drive with Windows 7

We also recommend reading the article on how to properly install Windows from a flash drive; sooner or later it may come in handy. All programs used here work perfectly under Windows 7, 8, 10.

The 2nd method is also very noteworthy; with it we will make a bootable Windows 7 flash drive without any programs, using the Windows command line, although it is noticeably more complicated.

It's important to keep in mind that usb ports should be fine (or at least one of them we need). The fact is that if we use a faulty USB, then there may simply be a loss of contact and nothing may work out. Plus, of course, the flash drive should also be in order, in general, keep this in mind.

Original Windows 7 images for flash drive here: http://nnm-club.me/forum/viewforum.php?f=504

Let us clarify the following points when creating a bootable USB flash drive with Windows 7:

First we need to find a windows iso image(to do this, in any search engine we write - download Windows 7 torrent, download one of the proposed options using the free torrent program. However, do not forget that you have a good antivirus, plus you can download only from trusted sites, ask your friends and acquaintances about such ). We will assume that we have found
Let's move on to the flash drive, we will completely clear it, so copy all important data from it in advance
Also, don’t forget about the size of the flash drive.. You need at least four GB, although this is not more correct smaller size iso image

How to make a bootable USB flash drive for Windows 7-10? Step-by-step instruction

Now let's prepare the flash drive, for this we need to format it. We do it like this:

We go to “My Computer”, find the flash drive we need there
Right-click on it
Select "Format"
In the window that appears, you can also check the box for “Quick, clearing only the table of contents” - this will be quite enough in most cases
That’s it, click “Start”, an additional warning may appear, we agree
We wait for the process to complete (usually no more than a minute)
At the end, the flash drive is ready for further actions, it is completely empty

If you have any questions with formatting or would like to know more about this important and useful process for storage devices, we recommend that you view the corresponding section. In which, by the way, you can also select a program for formatting a flash drive if it does not want to succumb to this process in a standard way(as described above), plus using additional programs formatting a flash drive, you can improve its technical condition.

Now we are almost close to the process of creating a bootable USB flash drive with Windows 7, for this we will consider a very interesting and simple program .

Download the original ISO image of Windows 7

The simplest, most convenient and free program to solve our problem is Windows 7 USB/DVD Download Tool

Very convenient, bootable fleshka is done in just 4 clicks, and it can also be made into a boot disk.

Or you can do it from the official website using this direct link http://wudt.codeplex.com/ (copy, paste into address bar browser and press enter).

The system also requires Microsoft .NET Framework_Online_Setup (completely free, online downloader, which means the Internet must be turned on), usually this utility is already installed in different assemblies windows. Actually it's official application from Microsoft, it is also important for the operation of other programs and games.

And so, you downloaded Windows 7 USB/DVD Download Tool. Now install it.

Open the program. We see this window.

Click on “Browse” and look for the Windows iso image we need on the computer.

Now if you specified an iso image, click “Next”. Now click on “USB device”.

Here we click on “Begin copying”.

And so the recording process began Windows iso image 7 per flash drive. We are waiting for the end.
The Windows 7 bootable USB flash drive is ready.

We recommend that you read the article on how to properly install Windows 7 on a netbook. So you will know what to do if the question arises of reinstalling Winows 7 on a netbook, laptop or computer without disk drive.

The second method is not simple. It is interesting for those who do not want to install any additional programs on their computer

This method uses the command Windows string, through which, by the way, you can do many more interesting things.

And so, let's go. We connect the flash drive to the USB port. Please note that a 4 GB flash drive will be used here. Open the command line like this, “Start” - “Run”:

Enter the command “cmd” and press “Enter”:

This is what should appear:

The first command we enter is “diskpart”, a special editor that gives us the ability to manage disks, press “Enter”:

Now we write “list disk” and press “Enter”, thereby getting a list of devices:

Now you need to determine without errors where your flash drive is located, in our case it is “Disk 3”. It most likely will not match yours, just make sure that you have found your flash drive correctly. If you have, for example, a flash drive “Disk 1”, then write it in the line and press “Enter”.

Attention! If you do not correctly identify the flash drive, you can format one of your hard drives and lose all the information on it.

So, enter “select disk 3″, press “enter”
The program detects our flash drive
Now enter “clean”, which will delete files on the flash drive, press “enter”
Next, enter “create partition primary”, press “enter”
With this command we created a section
Now enter “select partition 1”, press “enter”
Now enter “active”, again “enter”
Now we need to make the format file system for an NTFS flash drive, format it using “format fs=NTFS” or for quick formatting enter “format fs=NTFS QUICK”, press “enter”
We are waiting for the completion of the formatting process
All is ready

We write “assign” and the flash drive will automatically receive a letter, for us it is J
Upon completion, a window with the flash drive will automatically open
Now we need to exit using the “Exit” command
That's it, the bootable USB flash drive has been created, now you need to copy all the files from the installation operating system to it

It is only important to understand that it is not the iso image that should be copied in one file, but all the folders that are included in this iso image. To do this, you just need to mount it with some program, for example DAEMON Tools.

That's all, we have looked at the question of how to create a bootable USB flash drive with an operating system windows system 7.

Windows 7 remains the most popular operating system in the world to this day. Many users are not accepting the new flat design Windows, which appeared in the eighth version, remains faithful to the old, but still relevant operating system. And if you decide to install Windows 7 on your computer yourself, the first thing you need is bootable media. That is why today the question will be devoted to how to create a bootable USB flash drive with Windows 7.

To create a bootable USB drive with Windows 7, we will turn to the help of the most popular program for these purposes - UltraISO. This tool boasts rich functionality, allowing you to create and mount images, write files to disk, copy images from disks, create bootable media and much more. Creating a bootable USB flash drive for Windows 7 using UltraISO will be very simple.

How to create a bootable USB flash drive with Windows 7 in UltraISO?

note that this method Suitable for creating a bootable USB flash drive not only with Windows 7, but also for other versions of this operating system. Those. you can write any Windows to a flash drive via UltraISO program

1. First of all, if you do not have the UltraISO program, you will need to install it on your computer.

2. Run the UltraISO program and connect the flash drive on which the operating system distribution will be written to the computer.

3. Click on the button in the upper left corner "File" and select "Open" . In the explorer that appears, specify the path to the image with the distribution of your operating system.

4. Go to the menu in the program “Boot” – “Burn hard disk image” .

Please note that you will then need to provide administrator access. If your Account does not have access to administrator rights, then further actions will not be available to you.

5. Before starting the recording process, the removable media must be formatted, cleared of all previous information. To do this you need to click on the button "Format" .

6. When formatting is complete, you can begin the process of burning the image to a USB drive. To do this, click on the button "Record" .

7. The process of forming a bootable USB drive will begin, which will last for several minutes. Once the recording process is completed, a message will appear on the screen "Recording complete" .

As you can see, the process of creating a bootable USB flash drive in UltraISO is incredibly simple. From this point on, you can proceed directly to the installation of the operating system itself.

Record Russian windows version 7 maximum on a flash drive for later installation maximum Windows 7 via a USB flash drive to a laptop or PC, any user can do it. To do this, first you need to download the ISO image of Windows 7 maximum torrent for the flash drive. Windows 7 Ultimate is released in two versions, 32 bit and 64 bit. Very convenient, our images of Windows 7 ultimate 2017 with the most latest updates SP1 from microsoft, in addition, after our original image is installed maximum windows, on the desktop you will see an activator key for windows 7 64 maximum and plus a driver pack for updating and installing drivers for windows 7 in Russian for your device.
A Windows 7 flash drive is a clean image of the operating system that is always at hand or in your pocket. A Windows 7 Ultimate bootable USB flash drive will replace calling an adjuster at any time hardware to your home or on a trip with a laptop to service center, and this is some kind of money and time.

Burning a maximum Windows 7 iso image to a bootable USB flash drive

To record iso image with Windows 7 maximum on a flash drive for further installation of the operating system on a laptop or PC computer, you need to download Windows 7 for installation from a flash drive using the links above. Images for Windows installations 7 on a flash drive are no different from images for installation via DVD
Of course, you need a flash drive with a size of at least 4 GB. And we need a program that will make a bootable USB flash drive with Windows 7 from our image and your flash drive. For these purposes, we recommend three programs to choose from.
Rufus is a program that will create a bootable USB flash drive, clear interface. There will be no problems with this softom.
WinNTSetup portable is one of the most popular programs of its kind to create bootloaders and installation USB carriers.
Ultra ISO - universal program to work with images, it will write your iso image both to a DVD and a flash drive.

Installing Windows 7 from a USB flash drive

Installing Windows 7 from a flash drive is no different from installing Windows 7 from the official one. DVD disc, you just need to specify the priority in the BIOS when booting the system from USB flash drives. Or, when you turn on your laptop or computer, call the BOOT menu. This is done literally immediately after pressing the power button on the laptop or PC, in the interval from 2 to 5 seconds.
Most often, the F12 key is used to call up the boot device selection menu, but there are manufacturers who use their own key combinations. To get into boot menu For example Samsung laptop you need to press Esc (only once!). If you press Esc at least twice, the boot menu will close as soon as it opens. Therefore, you need to somehow calculate and clearly get into right time with key press call boot menu. For those who are not experienced, this may not be easy to do.
Calling the boot menu on HP laptops is also unusual. First you need to press the Esc key, then the service menu laptop. In it we select the desired item (by pressing hotkey). To call the boot menu on an HP laptop, press the F9 key.
Below is a table of hot buttons for calling the boot menu for different manufacturers and device types.

If you have questions, suggestions and wishes, write in the comments below. No one will be left unattended.