Menu
homeiOS

Windows 10 installation flash drive from iso image. Creating a Windows image using the Backup Wizard. Using the Windows Media Creation Tool

Boot windows flash drive 10 by using 5 different ways . If you are worried about installing Windows 10 or not, just because you don’t know how to create a bootable USB flash drive, then remember this article. The easiest way is the first method, but I still prefer the rufus program.

Method No. 1. Bootable Windows 10 USB flash drive using MediaCreationTool

Most The right way Windows boot 10 is a MediaCreationTool utility for Windows 10 from Microsoft. This utility is just a gift to all lovers of simplicity. The utility can be downloaded from. Microsoft website iso image with Windows 10 of any version and bit depth. It can also easily create a bootable USB flash drive in a few mouse clicks. Perhaps this is the most easy way creation bootable flash drive with Windows 10 if you don't have Windows image 10.
1.Download mediacreationtool Windows 10


After launching the utility, download the original image first iso windows 10


As we see below we can specify our flash drive(not an ISO file) and Windows 10 will install on your bootable media and yours will become immediately boot.

Attention! If you select a USB device here, you can immediately create a bootable USB flash drive



After the steps described above, we receive a bootable USB flash drive with Windows 10 pro or home version. The easiest way I know 😉
Either the small ones didn’t even allow you to download Windows Xp and before, seeing a bootable USB flash drive was a novelty, but now there are already a bunch of methods and even here, there are 5 of them described 😉

Method No. 2. Bootable Windows 10 USB flash drive using WindowsSetupFromUsb

WindowsSetupFromUsb is great alternative mediacriation tool program, but you must already have the Windows 10 image downloaded.
And here you need to be a little more confident as a user than in the first method.
About creating a bootable USB flash drive with different Windows(and Windows 10) I wrote in the article Multiboot flash drive #winsetupfromusb If you apply this article only to Windows 10, then your flash drive will be bootable with Windows 10.
ISO image with Windows 10 can be downloaded using the method above (more precisely, screenshots)

Method number 3. Bootable Windows 10 USB flash drive using Rufus

Rufus is a program I highly respect. Rufus has been supported for many years, is well maintained and is also very simple and user-friendly. How to make a bootable USB flash drive for Windows 10 using RUFUS, I described in the article a bootable USB flash drive with Windows 10 + UEFI

Method number 4. Bootable Windows 10 USB Flash Drive Using Windows 7 USB/DVD Download Tool

Windows 7 USB/DVD Download Tools - a program designed to create bootable Windows flash drives 7, Windows 8.1 and Windows 10. The program is also very simple and lightweight.
I talked more about Windows 7 USB/DVD Download Tools in the article Bootable USB flash drive with Windows 8 + UEFI (2nd method)

Method No. 5. Bootable Windows 10 USB flash drive by simply transferring files.

For this method you need ISO image with Windows 10. (how to download it is described in the first method)
First we go into my computer and format your flash drive in FAT32 format.



After that, open the image with Windows 10 in iso format by using Winrar programs(where to download Winrar)


Now open the ISO image from using Winrar and Extract the files to our flash drive. After this, the creation of a bootable flash drive will be completed and the flash drive is ready for use.
Select all files - Select Extract and indicate our flash drive, then click OK

Very important to have on hand boot drive with a working operating system, which can serve as a backup in case of any problems with the personal computer. That’s why today let’s figure out how to burn Windows 10 to a flash drive.

We will talk about several methods, each of which has certain nuances and features.

First, let's look at creating bootable usb drive using official software from Microsoft. The program is called Media Creation Tool, it is extremely simple, convenient and intuitive. IN automatic mode, the application downloads the image itself operating system Windows 10 and writes it to the selected drive. If the task is to create a bootable USB flash drive with an official iso file, then it’s better this method can not found.

We’ll also talk about how to record a system image using other non-official programs Microsoft products. In particular, we will touch on the UltraISO application and WinSetupFromUSB utility. We recommend choosing this method for those who have their own and perhaps not official version OS.

It is worth noting that the OS entry is the same simple task, like the question: ? Thanks to our instructions, you will cope with the task without any problems.

Method No. 1 - Media Creation Tool and official OS image

We have already noted, Media Creation Tool is a program that is a Microsoft branded product. Some users call this utility an electronic assistant, because it is used to download iso images and update a personal computer or laptop.

To record, we need to prepare the following:

You can download the application for free at official portal Microsoft.

After downloading the software, you need to launch the utility.

In the window that opens, you should click on “Accept”.

Next step- This is the choice of language, type of architecture, as well as the release of the operating system. Click on the “Next” button again.

Select “USB media”, and then indicate which device, of those connected to the computer, will be used for recording. It is very important not to confuse anything, so take the issue seriously. Click “Next” again.

You've gone through all the hardest things, all you have to do is wait until Media program Creation Tool will download everything necessary files, but it is not small - about 3 GB and will transfer it to the selected drive.

Finally, click on “Done”. The bootable USB flash drive has been created and is ready to use.

Method No. 2 - How to burn Windows 10 to a flash drive using UltraISO

For this method you need to prepare:

  • Directly the UltraISO program;
  • OS image;
  • A clean, formatted USB flash drive of 4 GB or more.

Open the UltraISO application, click on “Open” in the working window and then specify the path to the operating system iso file that you want to burn to the drive.

After that, we are interested in the “Boot” button, and then “Burn hard disk image”.

After going to the “Dick Drive” section, indicate which flash drive to use for recording. We are waiting for “Record”.

We are waiting for the creation of the bootable USB flash drive to complete. Let's use it! Don’t worry, on the OS image you choose, everything will be as you are used to, even the same.

Method No. 3 – Create a bootable USB flash drive in the WinSetupFromUSB program

Let's prepare everything we need again:

Having launched the program, we need to point to the flash drive, which will become bootable. To do this, mark the desired drive with a tick.

After this, specify the path to the operating room image Windows systems 10.

Click on “GO”. When a warning appears, we respond to it affirmatively.

We look forward to the completion of the recording and rejoice at the result of our work.

You have become familiar with the three most popular ways to create a bootable USB flash drive with an operating system. Windows system 10. We are confident that a backup plan for a rainy day will serve you well. Many users are convinced of personal experience that the presence of such a storage device is a wise approach that allows you to protect yourself most productively from various force majeure events.

It won’t take you much time to record and prepare the drive, but it will bring a lot of benefits!

Microsoft has officially launched the long-awaited Windows update 10 Fall Creators Update. IN latest issue a lot appeared interesting features and improvements that make the operating system even more powerful and sophisticated. And, naturally, many of you will want to create bootable usb drive to perform a clean installation of the update on your PC.

Even a schoolchild can create a bootable USB flash drive. All you need is a USB flash drive, Windows 10 Creators Update, Windows device and a few free minutes.

First, it is very important to obtain a licensed image of Windows 10. There are several files available for download, but luckily they are clearly labeled so you can easily figure out which one you need to download.

Secondly, keep in mind that the Windows 10 update is available in both 32-bit and 64-bit versions. Which one you choose depends on your device and its ability to handle one or the other. There is also an 86-bit version, but we do not recommend using it.

How much storage should a USB drive have? The answer to this question depends on the size of your ISO file. Overall, an 8GB flash drive will satisfy all your needs. A larger one will also work, although in our case it is not needed.

Given that much of the process involves transferring files, we recommend using a fast USB drive. This will also help when installing Windows 10 Creators Update.

To create a bootable USB flash drive, you also need a Windows device. There are no special requirements here, so you can use almost any desktop computer, laptop or tablet with a USB port, regardless of the version of the operating system it runs.

What's next?

Once the Windows 10 Creators Update image has finished downloading, the next thing you need to do is connect the USB drive to your device and open the window command line. To open the Run menu, simultaneously press Windows keys and R. To open the program, type “cmd” and press “Enter” (“cmd” in the Start menu).

Next, you need to prepare a USB drive. To do this, using the command prompt window, you need to follow these steps:

To open partitions, use the "diskpart" function. You may have to accept the UAC prompt.

To view a list of all storage devices connected to the PC, enter the command “list disk”.

Determine the drive number of the USB storage device you are using. To make things easier, just find the size that matches the capacity of the flash drive. Typically, this is the last disk listed.

To select a USB drive, use the “select disk X” command. Replace X with the disk number you discovered earlier.

To format the flash drive, enter “clean”.

To create a primary partition on it, use the “create partition primary” command.

To select a flash drive, enter “select partition 1”.

To make the main partition active, use the “active” command.

For quick formatting main partition as FAT32, enter “format fs = fat32 quick” (NTFS is selected in the photo below, but we only use FAT32!).

To assign a letter to the primary drive partition, use the “assign” command.

If you use the command "fs=ntfs" or "fs=ntfs quick" then you risk having problems booting Windows on newer PCs, laptops and tablets configured as UEFI. Simply put, on such systems you will not be able to boot using a USB drive and will end up installing Creators update Update formatted as NTFS.

When the flash drive is ready to go, all that's left is to copy the contents of the Windows 10 Creators Update image onto it. To do this, you can extract the ISO to a dedicated folder and duplicate everything from there, or mount the ISO and copy the files directly to a USB drive.

After this, you will have a bootable USB flash drive with Windows 10 ready to use.

Note! If you use more old version Windows 10 operating system and want to upgrade to the Windows 10 Fall Creators Update, click the "Update Now" button from the link above. will update your device to the latest version of the operating system. First, check your computer for compatibility, after which the program will begin downloading the necessary installation files. Once the download is complete, the update will begin on your device.

Video - How to burn a Windows image to a flash drive

How to Burn a Windows 10 Image Using the Rufus Utility

Rufus is a free and fast program that helps you format and create bootable USB drives. Also has portable version. Rufus has a fairly simple interface. The utility supports many languages, so it is understandable to any user. An important factor is that it does not need to be installed.

Let's understand how to use Rufus to create a bootable Windows 10 USB drive.

Follow the instructions below.

  1. Download Rufus.

  2. Connect the USB drive to your computer. Keep in mind that it must be 4GB+ in size.

  3. Now run the program and every time UAC request Click the “Yes” button. The utility will start.
  4. In the Device section, select the specified USB storage device.

  5. Then decide on the partition scheme (GPT or MBR for UEFI computer or BIOS/UEFI respectively).

  6. Also, select file type FAT32 or NTFS.

  7. Then find “New Volume” in the list.

  8. Select the ISO Image option (see screenshot), and click the CD/DVD drive icon to locate the Windows 10 image file on your computer.

  9. After selecting the file, click Start. A warning dialog box will appear. To continue, click the “OK” button.

  10. You will now see a "Ready" message, which indicates that the bootable Windows USB drive The 10 Creators Update is ready to use.

The Windows system is unpredictable and is ready to bring a lot of problems to users. In case of system recovery or reinstallation, you may need an installation drive with the system. You will need for Windows reinstallation 10 bootable USB flash drive with Windows 10. In this article we will describe the main ways to create this drive using various programs.

A question that is often asked Windows users 10: how to make a bootable USB flash drive (disk) with Windows 10? There are several options for quickly and convenient creation installation drive:

Let's look at these methods in more detail.

Using Media Creation Tools

First, we'll tell you how to create a bootable Windows 10 installation flash drive (disk) using Media Creation Tools.

Media Creation Tools is a utility from Microsoft that has become widespread since Windows versions 8. The functionality of this program is quite simple - downloading a Windows image and its further recording. If previously Windows 7 could be downloaded with only a key from the boxed (not pre-installed OEM) version, then MCT allows you to download almost any system image - the required bit depth, version and language.

Let's start in order:

  • Visit Microsoft's download page the necessary utility– download Media Creation Tools and click on "Download the tool now".

  • With the release of a new version of the system, the utility is also updated. The version of the utility will be the same as the version of the system build that will be loaded. For example, MCT for Windows 10 version 1803 would be version 10.0.17134.1.

  • Having downloaded and launched the utility, we will see a verification screen, at this stage the system version and basic compatibility are checked and the terms of the license agreement are accepted.

  • The next stage is where the fun begins.

At the stage "What do you want to do?" must be selected "Create installation media» . Then, you need to select the bit depth and language of the system (in the latest versions of MCT, selecting the system release is not required, since the image will contain all of them).

At the media selection stage, you can select either a USB drive where the image will be written to, or save an ISO image of the system, which can later be written to disk or created installation flash drive another utility.

Select the desired drive to burn, but be aware that the data from it will be formatted for recording the system image.

From time to time, users experience problems with the Internet or the system, which may interrupt the recording of the image to disk. In this case, you may need to download an ISO image of the system to further use.

To do this, at the stage "Select media" select ISO file, specify where exactly the image will be saved and wait for it to download. In case you want to record installation disk, you should not choose it as a download location. Specify HDD, and then you can write from the file to disk.

Using UltraISO

For the next recording option, we will try to use programs from third party manufacturers. For example, UltraISO - it will be used as a program for creating a bootable USB flash drive for Windows 10, which can be downloaded for free at the office. manufacturer's website - ultraiso-ezb.ru.

Installing the program takes a couple of moments and provides a 30-day free period use.

To write an image to USB, in UltraISO you need to open the file required for recording. To do this, click "File" - Open and select required file.

For further creation bootable flash drive, you need to go to the tab, where click on "Record the image hard drive» . After which you will need to select the drive to record to, then select the USB-HDD+ recording method and click on “Record”.

After waiting until it finishes, you can use this drive for further usage.

Answers to common questions

It is worth paying attention to common questions and user errors associated with creating an installation drive.

Is it possible to record a system image on removable hard large disk?

It is possible, but when using standard program functionality, all information will be lost, and this is critical for many users. The solution would be to divide the disk into several partitions - one of them stores necessary information, and the other is boot sector and stores installation data. The boot partition is marked active so that the BIOS perceives it as the main one and should boot from it. This will help you write the installation data to the disk and not lose the necessary information from the disk.

How to return a flash drive from bootable to regular?

When considering the question of how to return a flash drive from bootable to regular, it is worth noting that this is not particularly necessary, since the data from the image makes it bootable, namely the Boot folder, which “allows” UEFI and BIOS to see this drive as bootable. But the layout of the drive partitions is also important if you use removable drive with 2 sections. To do this, you need to make the section inactive or simply delete the information.

How to remove a bootable USB flash drive?

If you are interested in the question of how to remove a bootable flash drive, it is worth knowing that the name “bootable flash drive” is only a figurative description of a drive capable of booting program code before the system itself boots, and it can be formatted. To do this, in the My Computer (or This PC, in Windows 10) window, right-click on the desired drive and select "Format". Basic settings The media will automatically determine the desired parameters for deleting information; you only need to click the “Start” button.

What is a Windows 10 multiboot flash drive?

The Windows 10 multiboot flash drive contains not only the Windows 10 system image, but also others useful utilities, for example, to check a hard drive, random access memory or other equipment, or antivirus. In general, it will be useful to check the system before booting it.

Is it possible to create a bootable USB flash drive to reset the password?

It is quite possible to create such a thing as a bootable USB flash drive for resetting a password, and this is written in more detail in our article, where we indicated a method for resetting a password with the Kon-boot utility.

Have a great day!

Necessity burn Windows 10 image or any other operating system (program) to a flash drive(in other words, USB drive ) occurs in regular user computer infrequently. On the Internet you can find many different programs that cope well with this task. But how to choose one that will be easy and download it from where there are guaranteed to be no viruses or other unpleasant surprises? Having tried many options, I settled on completely free Russified utilities Rufus or Unetbootin. The latter is more tailored for recording operating system images Linux family, but personally I managed to use it to even record Windows 10 ( this had to be done with technical versions"tens" before the official release of this OS on July 29, 2015 - now from clean install of Windows 10 everything is much simpler).

I never tire of repeating that you should always download programs and utilities only from trusted sources, which are only official sites. By the way, on the official website and only there you are always guaranteed to find latest version programs. It is advisable to see if there is an article about the program you are interested in on Wikipedia. The presence of a story about a program on Wikipedia, of course, does not provide a 100% guarantee of its complete safety, but it very significantly reduces the chance of stumbling upon something downright dangerous. In addition, it is on Wikipedia that you can always find a link to the official website of the program. Anyone who has encountered this will agree with me that sometimes it is impossible to figure out in a search engine which site is official and which is not. The Wikipedia article solves this problem perfectly.

Rufus utility for writing images to a USB drive

Most experts say that Rufus is the optimal program for creating images on a flash drive in Windows 10. Download Rufus utility maybe on her official website. You can read about this program at Wikipedia- true, only on English language. Even if you don’t know it (English) and don’t use Google translator, then in any case, the presence of an article in this electronic encyclopedia always speaks in favor of one or another software. So, you can use the utility quite safely.

So, go to the official website (link above), scroll down to the large heading “ Downloads"and select either the top link (this is the last complete stable version), or better the second ( Portable version). Personally, I use the second (portable) version, since it runs but is not installed on the computer.

Download the utility and run it (for greater reliability, with administrator rights).

Rufus has quite a lot of settings. We will not deal with them and will leave everything as it is. If you do not know exactly what a particular parameter is responsible for, then it is better to leave them configured by default.

All we need to do is:

  1. Select the flash drive on which we will burn the image.
  2. Select the image itself that we want to record.
  3. Start recording by clicking on the “Start” button.

If you downloaded the portable version Rufus programs, then after finishing recording there is no need to delete it, since it was not installed on the computer. You can simply close the downloaded file and delete it. It’s better to save it for the future in some folder - you never know if you’ll need to write the image to a flash drive in your Windows 10 again.

Unetbootin utility for writing images to a flash drive

Now let's take a closer look at the Unetbootin utility. So, download it from the official website. To do this on specified page select “Download (for Windows)”.

Wikipedia about the Unetbootin program

Official website of the Unetbootin program

After this, we are redirected to the download page, where after a few seconds a window automatically appears prompting us to save the file to our computer (if this does not happen automatically, click the “direct link”).

Next, run the downloaded file. Big advantage Unetbootin is that it is not a program, but a utility. That is, there is no need to install it on your computer. It starts up immediately and is completely ready to work. And after that, you can delete the file and no traces of its presence on the computer will remain.

By the way, Unetbootin is a utility created specifically for recording operating system images Linux systems, but she does an excellent job with other images. For example, I already said that I even wrote down Windows 10 image on USB flash drive with its help and then successfully installed the “ten” on my computer next to the “seven” second system from a USB drive. I talked about this in detail in the article. Installing Windows 10 next to Windows 7 step by step .

Having launched the Unetbootin utility, instead of the “Distribution” item, we select “Disk Image”. (If you select “Distribution”, the program will automatically download and burn the Linux OS image).

Then we find through the browser (three dots) on our computer the Windows 10 image that we need to burn to a flash drive (or some other image that we need to burn).

After this, all we have to do is select the medium - our USB drive (flash drive) onto which we will write our image. In the case in the picture, this is the “I” disk.

Well, after completing all the steps described above, click OK. That's it, our image is recorded.