Menu
homeYandex

Bootable flash drive windows 7 usb dvd tool. Instructions for creating a bootable USB flash drive on Windows

Today, more and more laptop and PC manufacturers refuse to integrate an optical drive into their devices. This can be explained by the fact that CD and DVD media have lost their relevance. They have been replaced by smaller media such as memory cards and USB flash drives. In addition, it is simply impossible to integrate a drive into a thin ultrabook case. This trend has led to some inconveniences, for example, when installing an operating system. Creating a bootable Windows 7 USB flash drive becomes simply necessary.

How to create a bootable USB flash drive

What is necessary:

  • Flash drive
  • UltraISO program
  • DVD image with Operating System

The storage capacity must be at least 4 gigabytes. This is exactly how much a standard copy of Windows 7 weighs. Larger drives can be used.

If you have everything you need, we proceed to the actual creation.

First, insert the flash drive into any free USB port. Make sure that there is nothing on it that you need, as all information will be erased from it.

If you are recording an image from a laptop, check the battery charge and, if necessary, connect to a charger.

If the computer turns off during recording, there is a high probability that the flash drive will turn into a useless piece of plastic.

Step-by-step instruction:

1. Launch the UltraISO program. This must be done as a computer administrator, otherwise the program will not be able to start the recording process. Click the right button. mouse on the program shortcut and select “run as administrator”.

2. After the program starts, open your ISO image file in it. In the upper left corner of the program, click on the file->open button or press the CTRL+O button combination.

3. Select the file with the Windows 7 image in the window that opens and click “open”.

4. The selected disk image will open in the program and you will be able to see all the files that it consists of.

5. Then, go to the top menu of the program to the “Boot” item. In the drop-down list of actions, click “Burn Hard Disk Image”.

6. Another window will pop up where you will need to select recording options. First you need to specify which device the image will be written to. Opposite the “Disc Drive” option in the drop-down menu, select the flash drive that you prepared.

7. Opposite the “Recording method” parameter, select the “USB-HDD+” mode. Next to “Hide boot partition” put “no”. After this, you can safely press the “Record” button. The remaining parameters do not need to be touched.

8. After this, the process of writing the selected image to removable media will begin. This usually takes 10 to 15 minutes.
You can check the status of the process by looking at the event log at the top of the window and at the progress bar. Above it will be indicated the percentage of the recording completed, as well as how much time has passed and remains.
Do not close the program or turn off the computer during this time. If this happens, you risk ruining the flash drive.

9. Once the recording is complete, you will see a message in the event log stating that everything is ready and the recording was successful.

From a USB drive, installing Windows 7 is faster than from a regular disk. This is because USB 2.0 speeds are much faster than an optical drive.

10. The creation of a bootable USB flash drive has come to an end. All that remains is to check its functionality.

To do this, insert it into the USB port of the computer or laptop on which the installation will take place. Turn it on and go to BIOS. To do this, hold down the DEL or F2 key. After the transition, check your download priorities. Your flash drive should be in boot priority (First Boot Device). Save the settings by pressing the F10 key and restart the computer. If the installation process starts, it means you did everything correctly.

When purchasing licensed software, the buyer receives it on a DVD. Therefore, to install it on a PC that does not have an optical drive, you need to create a bootable flash drive. Our step-by-step instructions will help you with this.

There comes a time for every PC user when they need to reinstall Windows. But here's the problem. The disk drive is broken or the device does not have one at all. What to do then, there is only one way out - create a bootable USB flash drive. How to make a bootable Windows USB flash drive, learn about it by reading this article.

Preparation

Before you create a bootable USB flash drive with Windows, you need to prepare. You need to have with you:

  • flash drive with sufficient memory;
  • Windows 7 ISO image;
  • ISO image burning program.

The operating system required for reinstallation can be downloaded from the official Microsoft website. This can be done by paying a certain amount or by entering a special code that comes with a licensed Windows boot disk. However, not every user can afford to purchase an operating system. In this case, the ISO image can be found on the World Wide Web without any problems. However, you should be careful. Attackers can insert various malicious programs into hacked operating systems. Therefore, you need to download the image only from trusted resources.

It is also worth noting that the storage device will be completely formatted when recording the image. If there is any valuable data on it, then it is worth recording it on a separate disk or any other storage medium.

Creating a bootable USB flash drive

Making a bootable USB flash drive is very simple. Anyone can cope with this simple task if you follow certain instructions. There are at least 4 ways to install Windows 7 from a flash drive. They differ from each other in the software that is used to install Windows on a flash drive.

Windows 7 USB/DVD Download Tool

To create a bootable USB drive, you can use the official tool from Microsoft. The program can be downloaded directly from the Microsoft website. To create a bootable USB flash drive with Windows 7, you must follow the following instructions:

When the image copying process is complete, you will have a bootable USB flash drive with Windows 7 ISO at your disposal. Now you can install Windows 7 on your PC.

Ultra ISO

There is another way to make a USB flash drive with Windows. This method involves the presence of a program called Ultra ISO. Ultra ISO- paid software for interacting with images. You can download a 30-day trial version. The program has quite extensive functionality. With its help you can record, edit, convert images, etc. But it is the recording function that interests us. You can burn a Windows 7 image to a USB flash drive using the following instructions:


As one might understand, the process of creating a bootable USB flash drive is Ultra ISO does not require any specialized knowledge. A bootable Windows XP flash drive can be made in the same way.

WinSetupFromUSB

To create a bootable Windows USB flash drive, you can use WinSetupFromUSB. The program has several functions for working with images. Nevertheless, we are interested in creating a bootable USB flash drive. The program consists of only one window and is quite simple to use. To create a flash drive, you need to do the following:

Now the Windows 7 bootable USB flash drive is ready and can be used.

Windows command line

You can create a bootable Windows USB flash drive using Command line OS. Creating a bootable flash drive this way is a little more complicated. However, you won't have to download any additional programs.


After preparation, you need to write the OS installation files to the device by simply unpacking the image downloaded from the Internet. And thus, you will have at your disposal a flash drive with Windows recorded.

Conclusion

This article examined the question of how to create a bootable Windows 7 USB flash drive to reinstall this OS. To solve this problem, you can use one of the four methods proposed above. Each user has the right to choose any of them based on their preferences or capabilities. To obtain the desired result, you must follow the instructions given above for the chosen method.

Video on the topic

In this article, we will look in detail at how to make a bootable USB flash drive for Windows 7. I have repeatedly received emails about how to create a bootable USB flash drive for Windows 7, but to convey the information, just words are not enough, because there are some nuances that you need to know.

Now let's figure it out with you when you need to create a flash drive with Windows 7. Sometimes while working on a personal computer, laptop or netbook, the need arises to boot from some external device. This may be needed to recover from any failures, eliminate the consequences of a virus infection, or simply when reinstalling the operating system.

On desktop computers, this problem is usually solved using CD/DVD media, but for other devices, for example, netbooks that do not have a disk drive, using a bootable USB flash drive is often much easier than looking for an external DVD-ROM. I have it, but ordinary users who need to install Windows 7 from a flash drive do not need to buy it. Since they will not do this procedure often.

This is what the external drive looks like:

I also want to note that those users who recently bought a computer, laptop or netbook that has USB 2.0 and USB 3.0 ports should connect a USB flash drive with Windows 7 to USB 2.0. Because Windows 7 does not support USB 3.0. USB 3.0 ports are easy to identify; they are usually colored blue. Look at the photo below:

In any case, you will understand this when an error appears and further installation of Windows 7 will be impossible. Below in the photo you can see how it will look on your monitor 😉:

I recommend that you read the first method and about the Windows 7 USB/DVD Download Tool program, because they are the most reliable options for creating an installation flash drive with Windows 7. The first method is good because you will not need to use any programs, everything you will need – do this procedure in an already installed Windows 7. Of course, if it is not at hand, then proceed to method number two.

What you need to know before creating a flash drive

Before starting the process, you need to check that certain conditions are met:

  • Availability of a Windows 7 installation disk or an image with the Windows 7 operating system;
  • Availability of a “clean” flash drive with a size of at least 4 GB. If there is information on it, it must be copied somewhere, because during the work the USB drive will be formatted and all its contents will be destroyed;
  • Support boot/select from flash drive in BIOS.

I hope there are no difficulties with the first two conditions, but I’ll say a few words about the third. Actually, installing an operating system is a topic for a separate article, but in short it’s done like this. When the computer boots up, we enter the BIOS settings (on most computers, to do this, immediately after turning on the power, press or hold the DELETE key). For one of the most popular BIOS versions, the initial menu looks something like this:

Next, go to the “Advanced BIOS Features” menu and there we find the “Boot Sequence” item. It specifies the sequence of devices from which the BIOS will try to boot the computer. After that, we look at all possible selection options in the “First Boot Device” item. If there is anything related to USB there, then booting from a flash drive is possible.

After any changes in the BIOS, remember to save using the “F10” key.

So, if all the conditions are met, then you can move on to the topic of the article, how to make a bootable USB flash drive for Windows 7. In this article, we’ll talk about four methods that are the most popular.

Why am I talking about more than one method? Each user has pre-installed programs, and you may already have one of the programs on your computer. Why install other programs, because you can use the ones that exist.

By the way, there is an article on the blog about how to install Windows 7 when your computer has a disk drive: "". It will also be useful when you create a bootable USB flash drive and begin installing Windows 7.

The procedure for creating a flash drive via the command line

As I said above, this method is one of the most proven, which is why I want to talk about it at the very beginning of the article.

In the following three methods, you will learn how to make a bootable USB flash drive with Windows 7 using specially created programs with a convenient graphical interface. But the Windows 7 operating system has a built-in feature that does not require downloading any utilities, but it makes you work hard by typing a lot of letters on the keyboard.

If any of the readers saw the days when all work on the computer was carried out by typing various commands in the DOS system (white letters on a black screen, English-language commands and no multitasking!), then he will probably experience some nostalgia for the old days.

And for those who believe that Windows has always been graphical, they are deeply mistaken.

All work is carried out in the so-called Windows command mode. To go there, click the “Start” - “Run” button.

Enter “cmd” in the field and click “OK”.

A black screen appears in which we type commands, each of which is completed by pressing the “Enter” key.

To make everything clear, I will provide screenshots after each command. This way you will know that you are doing everything right.

Diskpart – enters disk management mode. You may be required to confirm running as an administrator - enter the administrator password and click “Yes”.

List disk – displays a list of all disks, by serial numbers, starting from zero.

Be especially careful here: all disks are displayed, including HDD partitions. So, correctly identify the desired flash drive. This is not difficult: it is listed after all hard drives and has a size you know.

Let's say that the flash drive is number 3. We type select disk 3. For example, if you have it in 4th place, then type select disk 4 accordingly.

Attention! Let me remind you, so as not to make a mistake, you can calculate your flash drive by size (look in the “Size” column).

After this, a message will appear on the screen confirming that you have selected some kind of media. It says: “Disk 3 selected.”

Now, if you are 100% sure that the correct media number is selected, enter the “Clean” command. This command completely deletes all files. I hope that you have already copied all the data from the flash drive; I talked about this at the very beginning of the article.

Type the command “Create partition primary” and press “Enter”. For those who want to know what will happen now - the creation of a primary partition on the disk.

Your section has been created.

Now enter “Select partition 1”.

Enter the command “active” to mark it as active and press “Enter” as always.

Enter "Format fs=NTFS". We format our flash drive for the NTFS file system. This operation will take a few minutes.

We are waiting for the formatting to finish.

After formatting the flash drive, a corresponding message will appear.

Enter the Assign command. As a result of executing this command, the utility will automatically create a new drive, for example, H: and display an information window with a message about this event.

All necessary actions were performed with the flash drive. Type Exit. We're finally leaving command mode.

Now we have an empty but bootable USB flash drive. All that remains is to copy the files from the Window 7 distribution onto it and you can begin the installation. Making a bootable Windows 7 USB flash drive via the command line is easy, the main thing is to remember all the steps.

UltraISO program

UltraISO is an extremely useful utility for working with disk images. It will be useful not only for our current purposes, and therefore I recommend that you familiarize yourself with its capabilities. The program is not free, but it has a trial version with quite suitable functionality for our task. Download the program here: and click on the “Free Trial” link.

We select a language from a long list (Russian is also available, among others). Click on any arrow in the “Russian” line (these are links to download from different site mirrors).

After downloading the program, run it to install.

In the next window, read the license text (optional) and select “I accept the terms of the agreement” and click “Next” again. Friends, who reads program licenses? I personally don't ;).

Now you need to specify the location on the disk where the necessary files will be copied. Leave it as default and click “Next”.

We receive an offer to create a shortcut to launch in the Start menu. We agree by clicking the “Next” button again.

If you want to add a program shortcut to your desktop, click on the first checkbox.

We are ready to install the program, click the “Install” button.

When copying files is finished, click “Finish”.

If everything is correct, click on “Trial period...” and go to the initial screen of the program.

Insert the flash drive into your computer, laptop or netbook.

Then go to the “Boot” menu and select “Burn hard disk image.”

After that, click “Format”.

Set the file system to NTFS, FAT32 is selected on the screenshot:

After formatting, click “Burn”.

Select "Yes".

We are waiting for the Windows 7 bootable USB flash drive to be created.

Now you can install Windows 7.


Microsoft utility

Using a special program from Microsoft allows you to make a bootable Windows 7 flash drive in many ways similar to the previous case, except that the utility is free and you can use it as much as you like. It's called Windows 7 USB/DVD Download Tool, download the program using .

To work with the program, you must install Microsoft .NET Framework 2.0. To download it, follow the link.

After downloading the program, launch it and click “Next”.

The next window displays information that everything is ready for installation. We confirm by clicking on the “Install” button that we agree to install this program.

Any user can write the Russian version of Windows 7 maximum onto a USB flash drive so that in the future you can install the maximum Windows 7 via a flash drive on a laptop or PC. To do this, first you need to download the ISO image of Windows 7 maximum torrent for the flash drive. Windows 7 Ultimate is released in two versions, 32 bit and 64 bit. Very convenient, our images of Windows 7 ultimate 2017 with the latest SP1 updates from Microsoft, in addition, after our original ultimate Windows image is installed, on the desktop you will see the activator key for Windows 7 64 ultimate and plus a driver pack for updating and installing drivers on windows 7 in Russian for your device.
A Windows 7 flash drive is a clean image of the operating system that is always at hand or in your pocket. A bootable Windows 7 Ultimate flash drive will at any time replace calling a hardware technician to your home or taking your laptop to a service center, which costs a lot of money and time.

Burning a maximum Windows 7 iso image to a bootable USB flash drive

To burn an ISO image with Windows 7 Ultimate onto a flash drive for further installation of the operating system on a laptop or PC, you need to download Windows 7 for installation from a flash drive using the links above. Images for installing Windows 7 on a USB flash drive are no different from images for installing via DVD.
Of course, you need a flash drive with a size of at least 4 GB. And we need a program that will make a bootable USB flash drive with Windows 7 from our image and your flash drive. For these purposes, we recommend three programs to choose from.
Rufus is a program that will create a bootable USB flash drive with a clear interface. There will be no problems with this softom.
WinNTSetup portable is one of the most popular programs of its kind for creating bootable and installation USB media.
UltraISO is a universal program for working with images, it will write your ISO image both to a DVD and a flash drive.

Installing Windows 7 from a USB flash drive

Installing Windows 7 from a flash drive is no different from installing Windows 7 from an official DVD, you just need to specify the priority in the BIOS when booting the system from a USB flash drive. Or, when you turn on your laptop or computer, call the BOOT menu. This is done literally immediately after pressing the power button on the laptop or PC, in the interval from 2 to 5 seconds.
Most often, the F12 key is used to call up the boot device selection menu, but there are manufacturers who use their own key combinations. To get to the boot menu of a Samsung laptop, for example, you need to press Esc (only once!). If you press Esc at least twice, the boot menu will close as soon as it opens. Therefore, you need to somehow calculate and clearly hit the right time by pressing the boot menu key. For those who are not experienced, this may not be easy to do.
Calling the boot menu on HP laptops is also unusual. First you need to press the Esc key, after which the laptop service menu will appear. In it we select the desired item (by pressing the hot key). To call the boot menu on an HP laptop, press the F9 key.
Below is a table of hot buttons for calling the boot menu for different manufacturers and types of devices.


If you have questions, suggestions and wishes, write in the comments below. No one will be left unattended.

Cast aside doubts, believe in your abilities, making a bootable USB flash drive for Windows 7, 8.1 or 10 is as easy as shelling pears, and you will definitely be convinced of this. There are several ways to create a bootable flash drive from iso, using different programs - simple and smart, humpbacked and crooked, which one to choose is up to you.

In this article I will try to show you a fairly simple method with 100% efficiency. Whether you like it or not, soon the world of optical drives will sink into oblivion and will never return; everyone will have to learn how to create a bootable flash drive, without exception, and in my opinion it is better to do this before than after the OS crash. The thousand-times proven program for a bootable flash drive, Rufus USB, will help you realize your need.

How to make a bootable USB flash drive for Windows 7-8.1 correctly - detailed instructions.

So, correctly creating a bootable USB flash drive 7, 8.1 will require the following from you. Flash drive with a capacity from 4GB to 8GB (depending on the size of the iso image). Next, you will need a good ISO image of the operating system, and note - not a crap rebuilt by someone unknown, with a set of outdated programs, but a 100% working official version of Windows 7 or 8.1 (whatever you like). It is this image that will save you from surprises, ensure error-free operation and updating of DirectX, drivers, etc., and allow you to make a high-quality bootable USB flash drive for 7, 8.1.

For those who have problems with the Windows iso image - the disk is scratched, the DVD drive is broken, is missing from the laptop initially, too lazy to create an image, etc., I suggest using the largest Russian-language torrent tracker and filling this gap. The Win 7 and Win 8.1 images are based on official Microsoft releases, with the addition of a small useful feature - for example, the Win 7 image contains all 32-bit and 64-bit versions from Starter to Ultimate, which, you see, is very convenient.

The second thing we really need is a program for creating a bootable Rufus flash drive. No installation required, just download and run. To avoid any surprises, the name of the folder with the program, the folder with the image and the path to them should not contain Russian letters, use the Latin alphabet - English.

Next to the Rufus program folder, create another one with the intuitive name Windows-7 or Win-8. Open the file manager Total Commander(if you don’t know what this is, it’s time to learn how to operate files correctly) or an archiver WinRAR– unpack the archive with the program, transfer the Windows image from the downloads folder to the created folders.

It remains to voice the last cautionary phase - transferring and saving important information from a USB Flash drive to a hard drive. The first step in the process of creating a bootable Windows 7 USB flash drive will be formatting - cleaning and repartitioning the media.

Step one. We turn our attention to the desktop, double-click on the “Computer” shortcut, and right-click on the flash drive shortcut. In the menu that opens, left-click on “format”, then what to select and where to click is shown in the picture. We are waiting for completion, the preparatory process is complete, we are 100% ready to make a bootable Windows 7 USB flash drive correctly and the first time.

1. Open the folder with the Rufus program - launch it, in the program window that opens, find “Device” and point to the flash drive, if it is not picked up automatically.

2. The next item is “Partition scheme”, select “MBR for computers with BIOS or UEFI”. If you need to install the operating system on a hard drive with a capacity of more than 2000GB, use “GPT for computers with UEFI”.

3. “File system” - FAT32 can be used with images smaller than 4GB, images larger than 4GB require the use of the file system - NTFS.

4. We leave this item unchanged, the default “Cluster size” is 4096 bytes.

5. “ISO image” - click on the optical drive icon, select the ISO image of the required system in Explorer.

6. Raise your gaze a little higher, set a name that is clear to you for the “new volume label” - in English letters, Win-7 - for example.

7. We check the correctness of the choice and the next action is to command Rufus to make a bootable flash drive 7, press the “Start” button. The program will issue a warning in Russian, click “OK” and leave the computer alone.

We take our playful hands and carry them to the kitchen, by force of will we force them to pour tea or coffee - we slowly enjoy the drink. This is a simple precaution; by not doing so, you will ensure the continuous creation of a bootable Windows flash drive; you will not be able to cause an error, overload the processor, stupefy the file subsystem, etc.

Depending on the speed characteristics of your PC, after 5-15 minutes you will see the inscription - 8 “Ready” - the bootable flash drive has been created, press nine - “Close”.

That’s actually the whole science, how to make an image of a bootable flash drive - you now know. As you can see, nothing extremely complicated or impossible, the main thing in this matter is to maintain a sequence of actions and you will definitely succeed.

How to make a flash drive bootable inBIOS.
To successfully install Windows from a flash drive, there is only one question left to answer - how to make a flash drive a boot disk in the BIOS? The question is important, because starting the installation differs from your usual order with a DVD disc, which leads to a common error and a surprised look.

For those who missed it, let me remind you that in the process of creating a flash drive, we selected the USB-HDD option. The bootable flash drive is recognized exactly as we called it, so there is no need to look for the usual DVD activation in the BIOS section - First Boot Device.

We place the installation flash drive in a free USB 2.0 connector, wait until the PC picks it up, and then reboot. During the system boot process, press Delete or F2 and enter the BIOS. Depending on the BIOS version, the name of the required Boot sector may differ, but the principle of operation will be the same. Open "Advanced BIOS Features".

Next, click on the “BootSeq & FloppySetup” section, find “Hard Disk Boot Priority”, go in and see the list of drives installed in your PC. Your bootable flash drive should be in the last place of honor - this is what needs to be corrected. To make a flash drive a boot disk, we need to move it to the top of the list - using the keyboard arrows (up and down), select the flash drive. Next, use the “+” keys and press until the installation flash drive becomes the first in the list. We complete the manipulations in the BIOS by pressing the “F10” (save) button.

In order to make the flash drive bootable in BIOS - UEFI, we find the same Boot sector – Loading, “Fixed Boot Order” opens before us and a sea of ​​“Boot Option” under it - this is setting the system boot sequence. We look at “Boot Option #1” - as a rule, the hard drive or SSD is located there, the system queries it first and the operating system starts loading from there. Click on “Boot Option #1”, find and select the inscription “USB Key:” with the name of your flash drive.

Press “F10” - the installation of Windows 7 from the flash drive has begun, then we wait for the first reboot, go into the BIOS, return the hard drive to first place, and save. After the reboot, the installation will continue, if you missed this moment - refuse to install again, the PC will start to reboot, go to the BIOS - return the HDD to its place.

How to make the image of a bootable flash drive active in the BIOS - and now you know this. The likelihood that you won’t succeed is practically zero - and these are not just words - this has already been proven by more than tens of thousands of users. A little attention plus a sequence of actions - nothing more is required from you. No. 2 - .

Before installing the OS, I advise you to take a look at - I’m sure you will find something interesting for yourself. Well, after successfully installing the operating system, do not forget to tell your friends how to make a bootable Windows 7 USB flash drive correctly - it will be useful for everyone. Good luck!

Best wishes
Denker.