Menu
homeExcel

Creating a bootable Windows 10 USB flash drive from iso. Creating bootable SD cards with Windows. Installation Media Creation Tool - Basic utility for reinstalling the system

Windows 10 bootable flash drive by using 5 different ways . If you are worried about installing Windows 10 or not, just because you don’t know how to create a bootable USB flash drive, then remember this article. The easiest way is the first method, but I still prefer the rufus program.

Method No. 1. Bootable Windows 10 USB flash drive using MediaCreationTool

Most The right way Windows boot 10 is a MediaCreationTool utility for Windows 10 from Microsoft. This utility is just a gift to all lovers of simplicity. The utility can be downloaded from. Microsoft website iso image with Windows 10 of any version and bit depth. It can also easily create a bootable USB flash drive in a few mouse clicks. Perhaps this is the most easy way creation bootable flash drive with Windows 10 if you don't have a Windows 10 image.
1.Download mediacreationtool Windows 10


After launching the utility, download the original image first iso windows 10


As we see below we can specify our flash drive(not an ISO file) and Windows 10 will install on your bootable media and your boot.

Attention! If you select a USB device here, you can immediately create a bootable USB flash drive



After the steps described above, we receive a bootable USB flash drive with Windows 10 pro or home version. The easiest way I know 😉
Either the small ones didn’t even allow you to download Windows Xp and before, seeing a bootable USB flash drive was a novelty, but now there are already a bunch of methods and even here, there are 5 of them described 😉

Method No. 2. Bootable Windows 10 USB flash drive using WindowsSetupFromUsb

WindowsSetupFromUsb is great alternative mediacriation tool program, but you must already have the Windows 10 image downloaded.
And here you need to be a little more confident as a user than in the first method.
About creating a bootable USB flash drive with different Windows(and Windows 10) I wrote in the article Multiboot flash drive #winsetupfromusb If you apply this article only to Windows 10, then your flash drive will be bootable with Windows 10.
ISO image with Windows 10 can be downloaded using the method above (more precisely, screenshots)

Method number 3. Bootable Windows 10 USB flash drive using Rufus

Rufus is a program I highly respect. Rufus has been supported for many years, is well maintained and is also very simple and user-friendly. I talked about how to make a bootable USB flash drive for Windows 10 using RUFUS in the article Bootable USB flash drive with Windows 10 + UEFI

Method number 4. Bootable Windows 10 USB Flash Drive Using Windows 7 USB/DVD Download Tool

Windows 7 USB/DVD Download Tools - a program designed to create bootable flash drives Windows 7, Windows 8.1 and Windows 10. The program is also very simple and easy.
I talked more about Windows 7 USB/DVD Download Tools in the article Bootable USB flash drive with Windows 8 + UEFI (2nd method)

Method No. 5. Bootable Windows 10 USB flash drive by simply transferring files.

For this method you need ISO image with Windows 10. (how to download it is described in the first method)
First we go into my computer and format your flash drive in FAT32 format.



After that, open the image with Windows 10 in iso format using Winrar programs(where to download Winrar)


Now open the ISO image from using Winrar and Extract the files to our flash drive. After this, the creation of a bootable flash drive will be completed and the flash drive is ready for use.
Select all files - Select Extract and indicate our flash drive, then click OK


Making a bootable USB flash drive for Windows 10 is not at all difficult when you have detailed instructions in front of your eyes. And on this page you will find detailed instructions, describing 4 methods on how to create 32/64 bit. You do not need to use all 4 methods; you must choose only one that suits you. But in some cases, specific ways to create installation USB Flash drives may not work and you are using another method to create bootable removable media.

If you want to install Windows 10 on a device that does not have a CD/DVD drive, but only USB ports, then the only option is to install the OS using a bootable USB flash drive. There are more than 5 in various ways how you can do this, but 3 of them are official, and all the rest involve using third party software. Official ways to make a bootable USB flash drive include:

  • Creating a bootable USB flash drive using ;
  • Simple copying of data with preliminary “correct” formatting;
  • Using the official Windows USB/DVD Download Tool;
There is also a 4th official method, creating bootable media using the command line. But we will leave this method for professionals. system administrators because it is very complex. We will look at the remaining 3 methods in today's article. We will also look at one way to create a bootable FLASH disk using software from third-party developers. You can choose any, but the following options are especially popular: This is far from full list utilities, for example, there is also WindowsSetupFromUsb and other solutions. All of them inherently copy each other, but they have one thing in common - they are unofficial, and therefore potentially less secure. But these methods are more flexible, so we will also consider creating an installation flash drive using one of third party programs.

How to make a bootable USB flash drive using Windows 10 Installation Media Creation Tool

Windows 10 Installation Media Creation Tool– this utility appeared with Windows 10. The developer of this utility is Microsoft, which means you can completely rely on this software. Of course, if you download it from the company’s official website. Create a bootable USB flash drive using Windows 10 Installation Media Creation Tool is the maximum simple task. First of all, you need to download this utility, install it and accept it license agreement. After this you can start creating boot disk. We recommend using Windows 10 Installation Media Creation Tool in Russian, then the whole process will be intuitive, but let's go through it together. At the first stage, you need to select “Create installation media for another computer":


After this, the utility will prompt you to independently select the language, architecture and release of the future OS. You can already select the Russian language at this stage, so that you don’t have to rack your brains in the future about how to install the Russian language on Windows 10. Architecture, also known as the bit depth of the OS that you choose on at this stage, is not subject to change in the future. Therefore, pay close attention to this point. If you don’t know which bit depth to choose, then it’s better to choose the 64 bit version. It's more versatile. And choose the release, or type of OS, based on your tasks.


When you decide on basic settings future OS, click on the “Next” button. You will find yourself in the next window where you need to specify “USB flash memory device”. The utility itself prompts that the flash drive should be at least 3 GB, and better, at least 4 GB.


After you have selected the flash drive, click on the “Next” button and then the utility will do absolutely everything for you. You will have to wait a little, as the utility will download the system from the Internet. Use this method If you do not have access to the network, unfortunately, it will not work. You won't be able to use this method if you want to do USB flash drive with some version of Windows 10 that differs from the official one.

This tool only works with official version, and downloads it independently from Windows servers 10. But in this case you do not need to have your own ISO image. Also, do not forget that before writing the OS to a flash drive, the utility will format the flash drive. This means that all your data, if it was there, on the flash drive will be lost. More information O this method you will learn from the following video:

How to make a bootable USB flash drive by simply copying files

The second way to make a bootable USB flash drive is striking in its simplicity. But it is the second, not the first, since it is not suitable for everyone. You can actually create a bootable USB flash drive regular copying system files, but only if your computer supports UEFI boot. You can find out about this in the specifications of your device or on forums. Moreover, the computer where you are going to install Windows 10 from a flash drive that you created in a similar way must support UEFI boot. If both devices support this technology, then start creating.

First of all, you need to connect the USB flash drive to your computer. If the flash drive has the files you need, then transfer them to HDD. Then you need to format the flash drive in FAT32 format.


Precisely in FAT32, otherwise nothing further will work. After you have formatted the flash drive, you must unpack the ISO image of Windows 10. You can unpack it with regular WinRar or use specialized utilities designed to work with the .ISO format. Of course, before this you must obtain an ISO image of Windows 10. in this case you can decide for yourself whether to use the original and clean version Windows 10, or use the OS where the key is embedded. After you unpack the ISO image, transfer the data to a USB flash drive using regular copying.


When the files are copied, extract in a safe way flash drive. After this you can use given USB Flash Disk as bootable.

Windows USB/DVD Download Tool

The last official way to create a bootable Windows 10 USB flash drive is to use the Windows USB/DVD Download Tool. Although this tool was created by Microsoft for Windows 7, it works great with Windows 10. So don't be alarmed that original name Windows tool 7 USB/DVD Download Tool, and not Windows 10, the utility will still do its job perfectly. The principle of operation is similar to the Media Creation Tool, but the utility allows you to independently specify which Windows 10 image you want to create a bootable USB flash drive from.

First, download the Windows USB/DVD Download Tool and install the utility. Then we go in and in the first window we indicate the direct path to the ISO image of Windows 10. In this case, it will no longer be possible to automatically download the image from the Microsoft website, even if you want the original version. You will be forced to download any version manually.


After the path to the image is specified, you need to click the “Next” or “Next” button, depending on the language of the utility itself. And you will find yourself in a window where you have to choose what kind of media you are creating. Option two - USB device or DVD. You and I decided to do bootable usb disk, so click on the USB device button.


After this, we will be in a new window where we need to choose which flash drive to turn into a bootable one. As you understand, the flash drive should already be connected to the computer at this moment. Pre-formatting of the flash drive is not required, but you need to remember that the utility will format it, which means all data will be deleted from it. After you have selected the flash drive that you want to make bootable/installable, click on the Begin copying button.


Copying will take approximately 10-20 minutes. At this time, it is better not to load the computer with other tasks. After copying is complete, the utility itself will notify you of completion, and then prompt you to remove the media. This completes the process of creating a bootable USB flash drive.

Using third party software

If none of the 3 official ways did not suit you, then you can use the software created third party developers. This method is less secure, since third-party software, although well-known, can still make changes to installation image. If you decide to use it, make sure you choose a reliable utility and download a clean version. We recommend using free solution Ultra ISO. No less known solution Rufus or WindowsSetupFromUsb. All three programs are similar in that before you start working with them, you must download the Windows 10 ISO image yourself.

Nowadays, few users use DVDs to install the OS on their computer. Even Microsoft decided to sell the new operating system not on blanks, but on flash drives. Therefore you need to know how to do installation flash drive Windows 10, if you want to reinstall the system or downloaded the image and decided to install the OS on your computer.

Video instruction

The video will help you learn how to create a Windows 10 installation flash drive.

Without using third party programs

This method is simple and does not require the use of third party programs. But the computer on which Windows 10 will be installed must have software UEFI.

Worth knowing! Majority motherboards, produced by manufacturers over the past 2 - 3 years, support EFI boot.

Important! Set the BIOS to boot from a removable drive. It's better to do this in Boot Menu"motherboards".

Via Command Line

  1. Launch Command Prompt as Administrator.
  2. Enter the commands one by one: diskpart And list disk to see all the drives available on your PC.
  3. To select a disk write: select disk no., where № is the disk number specified in the list.
  4. Run one by one following commands:
  5. Mount the OS image to disk and drag all the contents to the flash drive.

It’s more convenient to watch the process of creating a distribution kit on video.

Windows 10 Installation Media Creation Tool utility for installation in the official way

The Windows 10 Installation Media Creation Tool utility was created by programmers Microsoft after the release of the new OS. It creates a bootable USB flash drive automatically. But it is better to use the utility if you know Windows key or you are going to do a clean installation after you have previously updated from the “seven” or “eight”. If you took the second path, skip the key entry point and at the end of the installation, enter your own account— activation will be performed automatically. Main disadvantage utilities - you need access to the Internet.

  1. Download the utility from the Microsoft website.

    Important! The downloaded version must match the OS installed on the PC.

  2. In the program window, select “Create installation media for another computer.”
  3. Specify the language, version, architecture of the system that you are going to install on the device.
  4. Place the switch on the “USB Flash Memory Device” item.

Healthy! Use the flash drive created using the utility to clean install OS or to restore it.

Watch the video on how to go through the process of creating a distribution using the Windows 10 utility in the Media Creation Tool.

Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool utility creates bootable flash drives not only with “seven”. It is suitable for creating a “tens” distribution:

  • in the utility window, select the OS image;
  • indicate which media to use to create the distribution (in our version, it is a USB flash drive);
  • launch the utility.

You can clearly see how to create a Windows 10 distribution using the 7 USB/DVD Download Tool in the video.

  • GPT for computers with UEFI – for PCs that support EFI boot;
  • MBR for computers with BIOS or UEFI-CSM - for PCs with standard BIOS.

Detailed operation of the Rufus program is presented in the video.

Using UltraISO

The UltraISO program is used by many users. It is considered a universal assistant when working with virtual, DVD/CD discs and more. It will also help you create a Windows 10 distribution.


Note! It is advisable not to change the remaining items - they are set in the desired position by default.

In the video you will be able to see in detail how to create a bootable USB flash drive for Windows 10 using UltraISO programs.

Conclusion

You can create a bootable USB flash drive for Windows 10 by copying data to media using official utilities from Microsoft or third party programs. According to the editors, the best option– use the utility Windows 7 USB/DVD Download Tool. But if you do not have access to the Internet, then you can use the program Rufus or Ultra ISO.

Gone are the days when to install a system you needed a DVD, which in turn could get scratched and freeze during installation. A bootable USB flash drive for Windows 10, Windows 7, Windows XP for installing the system on your computer will be faster and more convenient. Let's create a bootable USB flash drive using Rufus And . When installing the system, I recommend inserting the drive into the rear USB ports of the computer.

Let's start the procedure for PC with UEFI bios, (you can read types of bios) because They may not be suitable for old computers and laptops; for older PCs we will consider them below. Using Microsoft's own utility. Download Windows 10 Installation Media Creation Tool, run the downloaded program and select “Create installation drive”.

  • There should be a checkmark, then it will automatically adapt to your system.
  • You can manually select what you need; to do this, you need to uncheck the box in step 1.

  • We indicate the medium that will be a USB device.

  • You specify (select) the path to the device. We are waiting for the download and recording to finish. That's all!!!

Windows 8.1 installation drive

Download Windows 8 Installation Media Creation Tool similar situation. We do as described above with the tenth version.

Create a bootable USB flash drive for Windows 10 without programs

Let's look at the option without programs (suitable only for UEFI bios). You will need the downloaded distribution from ISO format And USB storage device, formatted in FAT32.

  1. Select the windows image and right-click on it.
  2. IN context menu click "connect".
  3. A disk like the one in the picture with Windows files and folders will appear.

  1. Circle (select) everything and right-click on the file or folder.
  2. Click "send" in the context menu.
  3. Select a USB device.

Create a bootable USB flash drive for Windows 10, 7, XP using Ultraiso

The seventh version is old, so we will create an installation windows media 7 using the UltraISO program. With this program you can also burn Windows 10 and XP to a USB flash drive. Download the program and install it.

  1. Open our downloaded image from Windows system 7, 8, 10, xp.
  2. Make sure the disk icon is highlighted.
  3. Select "Record" image of Hard disk".

  1. We look carefully to see that he is standing USB drive so as not to format your hard drive.
  2. Select the recording method "USB-HDD+". (When booting the computer, select USB-HDD+ in BootMenu).
  3. Click "record".

Bootable USB flash drive for Windows 7, 10, XP using Rufus

If your bios old not uefi, then Rufus is created for this. Suitable for everyone windows versions. Select in the "Partition scheme and type" column system interface": For old BIOS, select MBR. For modern UEFI. Download and install the rufus program.

Bootable Windows 7 USB flash drive using USB/DVD Download Tool

A utility from Microsoft created in ancient times is very relevant to this day to create Windows 7 installation media with using Windows USB/DVD Download Tool. Download and install on your computer.

  • Select USB drive.

  • Click "Erase".

  • We press “Yes”, it formats the drive, writes it, and everything is ready.

The modern world is in constant movement and development. This statement also applies to computer technology, in particular to information carriers. Miniature flash drives (flash drives) are replacing the recently used optical disks.

This is explained simply: the flash drive has high speed read and write, is rewritable and accommodates large volume data, which allows you to use it as a boot for the Windows 10 system.

What is a bootable flash drive?

A Windows 10 bootable flash drive is a small storage medium that connects to the USB port of a computer, laptop or netbook and has standard volume memory from 2 to 32 GB. Using a flash drive loaded with operating system(OS), you can restore Windows 10 after failures or start a new installation.

A bootable USB flash drive also allows you to run Windows 10 for a preliminary acquaintance with the OS without installing the system.

Ways to create a bootable USB flash drive

For creating bootable flash drive With installed distribution Windows 10 apply different methods, including using all kinds of programs.

A distribution kit is a file or files intended for installing a program.

The main methods include the following:

  1. Using built-in Windows tools.
  2. Without the use of additional programs.
  3. By using third party utilities and applications:
    • Windows 10 Installation Media Creation Too;
    • Windows 7 USB/DVD Download Tool;
    • Rufus;
    • UltraISO;
    • WinSetupFromUSB.

Using built-in Windows tools

You will need a flash drive of at least 4 GB in size and a Windows 10 distribution.

Insert the flash drive into an empty USB port on your computer or laptop.

Note! On a computer, it is advisable to insert the flash drive into the slot on the back wall.

Run as administrator command line. To do this, right-click Start and select the appropriate function.

Running the command line

Then enter the following commands sequentially, do not forget to press the Enter key after each:

  • diskpart;
  • list disk - scanning and displaying a list of storage devices;
  • select disk 5 - select a flash drive (where 5 is the number of the USB drive, which can be different for everyone);
  • clean - cleaning the storage device;
  • create partition primary - creating a main partition;
  • select partition 1 - select the main boot partition;
  • active - section activation;
  • format fs=NTFS - formatting a flash drive;
  • assign - assigning a name.

Creating a bootable USB flash drive

After completing all the steps, close the command prompt and copy everything Windows files 10 per flash drive.

Note that you can prepare a flash drive in this way in any OS. To do this, you first need to launch the command line using the Win+R key combination. Then enter cmd command and press Enter. The further algorithm is no different from the above.

Without using any programs

This method of creating a bootable flash drive is considered the easiest. However, it can only be used on computers with a Unified Extensible Firmware Interface (UEFI) chip, which performs the same functions as the BIOS, but is more advanced, better interacts with the OS bootloader, and has a number of other advantages. Currently, UEFI is installed on all new computer models.

You will need a flash drive of at least 4 GB, formatted in FAT32, and an ISO image with Windows 10.

Mount the image using a program designed for this purpose, for example, Daemon Tools or UltraISO.

Open the created virtual disk with the Windows 10 OS image.

Opening virtual disk With Windows system 10

Transfer all files from the open virtual disk to a flash drive, and it will automatically become bootable.

Copying and transferring files Windows distribution 10 per flash drive

Using third-party programs and utilities

Windows 10 Installation Media Creation Tool

Download the utility of the required bit depth (32 or 64-bit) on the official Microsoft website at https://www.microsoft.com/ru-ru/software-download...

Note that you can use this method if you have a key Windows activation 10 or when upgrading from more early version for a subsequent new (clean) installation. In the second case, you do not need to enter a key and activation occurs automatically when you log in using a previously activated account.

Run the utility, left-click the radio button to create an installation flash drive and click Next.

Select Create installation media for another computer

Select the system language, bitness, version, and click Next.

Select required characteristics and click Next

Note how the distribution will be created. In this case, just select USB device and click Next.

Select USB flash drive and click Next

After the process is completed, you will receive a ready-made flash drive with Windows 10 OS, with which you can both install the system from scratch and restore it in case of failures.

How to create a bootable USB flash drive for Windows 10 - video

Windows 7 USB/DVD Download Tool

You can use free program from a Microsoft developer, originally developed for Windows 7. To create a flash drive, you will need an ISO image with the Windows 10 distribution and, in fact, the flash drive itself. There is no need to format it first.

Launch the program and click on the Browse button to select the OS image, then click Next to continue.

Select Windows 10 ISO Image

Select a method for loading the distribution onto the flash drive.

Click USB button device

From the drop-down list, select the media (flash drive) on which Windows 10 will be loaded. After clicking the Begin copying button, confirm your consent to complete cleaning flash drive.

Select the USB device to download the Windows 10 ISO image and click Begin copying

The flash drive will be completely ready for use after the file copying process is completed.

Wait until the process of downloading Windows 10 distribution files to the USB flash drive finishes

Rufus program

To create a bootable Windows flash drive 10 you can use Russian language Rufus program.

The Rufus program is suitable for creating a bootable USB flash drive on computers with both UEFI and BIOS.

  1. Launch the program.
  2. From the Device drop-down list, select a USB storage device.
  3. Check the boxes quick formatting and creating a boot disk.
  4. Opposite the last item, select the Windows 10 ISO image itself.
  5. For the partition scheme and system interface type, select the one that indicates computers with a regular BIOS.
  6. Set the file system to NTFS, cluster size to 4096 bytes, new volume label to Windows 10.
  7. Check the box to create an extended label and device icon, and use the radio button to standard installation Windows.
  8. All these manipulations are performed in one program window. Click the Start button, after which a bootable USB flash drive will be created.