How to change the Windows Welcome screen. How to remove Windows boot options

Modern computers and its mobile analogues are multi-component devices, and the more complex the device, the larger number reasons that may lead to malfunctions. A quarter of all users experience the problem and see a black screen on their display. Faced with this popular glitch, people often turn to paid help However, practice proves that often the causes of problems can be quickly and inexpensively eliminated by anyone on their own. The material below will help you successfully complete the task.

Content:

Identifying the cause will allow you to specifically eliminate the problem when the black screen turns on. You just need to be attentive to the little things, for example, when you turn on the PC, is there any noise, whether the indicators on the case light up, etc. Even seemingly insignificant mechanical impacts on a complex device and the appearance of liquids on internal components as a result of temperature changes or careless user operation with the device are most often the causes of problems leading to a black screen.

Also from the main reasons why a black screen appears, Special attention you need to pay attention to the following:

Hardware or software conflicts, as a result of which the graphical interface cannot be displayed;
Battery failure;
Problems with video accelerator, RAM, motherboard, hard drive, etc.;
Driver incompatibility;
Device overheating;
System failure;
Problems with the display (monitor).

What to do if a black screen appears when loading Windows 10 or 7?

Black Windows screen indicates serious problems with the PC, so people who do not have sufficient experience are better off trusting a specialist.

I consider it my duty to note that all the recommendations below serve information material, and not a call for mandatory execution. Interfering with the operation of complex devices without experience can damage an expensive gadget.

It is better to perform simple actions, the meaning of which is completely understandable to a person, and not try to gain experience at the cost of causing unconscious harm to the computer.
For example, simple complete shutdown from the PC power supply and its subsequent switching on in half of the cases leads to successful loading Windows 7-10.

Only when this does not help should you proceed to more complex measures described later in this guide.

After installing a utility or game on your computer, a black screen often appears when loading Windows. In these cases, using the restore point (TV) function through safe mode(BR).

The following steps must be taken:

Start the PC from a bootable USB flash drive;
Click “System Restore”;
For the PC to enter BR after reboot, use the command: “bcdedit /set safeboot minimal”;
Restart PC;
Log in to the control panel (in “Ten” this menu was called “Options”);
Open the “Update/Security” tab and go to the “Recovery” section;
Click “Start”;
Next, choose one of the two proposed options for action (at the personal discretion of the computer owner);
Wait until the process completes.
Ready.

LifeCD will help eliminate the appearance of a black screen when starting a PC.
The sequence of steps is as follows:

Install lifeCD into the drive;
Next, while the PC is booting, enter the BIOS and set the priority of starting the OS from the drive;
Close the BIOS, saving the adjustments entered into it;
Wait for the PC to start from the disk;
"System Restore";
"Further";
Click “Startup Recovery”;
Wait;
Ready.

If a black screen appears when you turn on the computer, it is recommended to use BR (safe mode).
To start in BR and fix the problem, you only need to complete a few steps:

Immediately after turning on the PC, click “F8” (another button may be used, so you must first read the accompanying documents for the PC);
Using the arrows on the keyboard, select BR and click “Enter”;
Wait for loading;
"Start";
“Programs” and go to the “Standard” section;
Click “Service”;
Click “System Restore”;
Specify TV (recovery point) and click “Next”;
Click “Done”;
Wait for completion;

Disabling unnecessary or conflicting programs

After loading into BR, open the control panel and go to the “Programs and Features” tab, where you sort programs by the time they were installed on the PC. Often simple removal of the latter installed utilities eliminates problems. Also, CCleaner, which is available for free on the Internet, allows you to uninstall applications without leaving “tails” behind them.

If the user does not want to uninstall utilities, they can be disabled and excluded from the list of auto Windows launch:

In the search line (combination Windows keys+ R) start type “msconfig”;
After clicking on “Enter”, enter Services in the menu that appears, where to disable unnecessary programs, and from the “Startup” tab remove unnecessary ones for everyday use applications.

For Tens users, to get to the startup section, just launch the “Task Manager” (TZ).

Video drivers are available for free, but during installation you need to be careful so that the software is fully compatible not only with the components of the PC, but also with the operating system running on it. To find out accurate information To determine which drivers need to be installed, it is recommended to use the “dxdiag” parameter.

By clicking on the “Windows and R” key combination, you will need to type the above word and click “Ok”. A menu will be displayed where, in the “Screen” tab, you can view information about the video accelerator installed in the PC. After searching for drivers, downloading and installing them current versions The black screen no longer appears. However, it happens that he is called malicious applications infected the system. The next paragraph of the instructions is devoted to this reason.

Even after the procedure for restoring the operating system, it is advisable to carry out a full analysis for the presence of “malware” in it, which again damages the OS files.
If the OS still does not start at all, you need to remove the hard drive from the problematic PC and connect it to a work computer and check for viruses. For this you can use "Dr Web CureIt" It requires you to select the connected hard drive and start the analysis by clicking “Run scan”.

Restoring the Windows Registry and Explorer

Windows provides automatic creation and saving copies of the registry in the “System32\config\RegBack” directory, which is located in the Windows partition.

You need to move the files from the specified directory to the “config” directory. Of course, in this case you will have to confirm the firmness of your intentions and click “Replace”.
This is easy to do when the conductor is functioning normally, but if not, you will need to restore it using boot disk OS and AVZ utility.

To this end, perform the following actions:

Open the main menu "AVZ" (you can use the "portable" version of this free antivirus program, which runs from a flash drive);
Click “File”;
Click “System Restore”;
Check the boxes “Restore Explorer” and “Restore Desktop”;
Click “Perform selected operations”;
Log in to the “Control Panel”;
Next, go to the “Add and Remove Programs” tab;
Uninstall suspicious utilities;
Install into drive bootable media from the OS and then in the “File” tab click “DZ”;
Click " New task” and then type “sfc /scannow” in the command line;
Click “Enter”;
Restart the PC by logging into Windows in BR;
Open the directory located on the OS CD under the name “i386”;
Copy explorer.ex_, temporarily removing one letter from the extension;
Copy the created file to the system volume;
Next, add the missing letter “e” in the extension;
After typing “regedit”, click “Ok”;
Open the directory HKEY_LOCAL_MACHINE;
Expand content “Software”;
Go to the “Microsoft” folder;
Open the “WindowsNT” subfolder;
Next, from the “CurrentVersion” directory, go to the “Winlogon” subdirectory;
For “Shell”, indicate the location of the file created when performing steps 15-17;
Click “Ok”;
Open the “DZ” menu again;
Right-click on the “explorer.exe” process;
Click “End process”;
Then in the remote control “New task”;
Type "cmd";
Click “Ok”;
In the console, type “Cd C:\”;
Click “Enter”;
Type “copy explorer.exe C:\Windows”;
Input;
"Yes";
Restart PC;
Ready.

How to remove the black screen after updating Windows 10?

If such a failure occurs after Windows updates 10, correcting the error does not take much time, since usually the mouse cursor and keyboard remain operational.
The sequence of actions is as follows:

CTRL + Shift + Esc;
In the DZ, click “File”;
Click “Run new task”;
Type “cmd” and specify creation with extended privileges;
Type “sfc /scannow”;
"Input";
Will begin automatic analysis and bug fixes.

Black screen when turning on the computer before Windows loads

If there are no signs of life on the display before Windows starts, that is, the monitor has a black screen from the very beginning, but there is sound. Heard system sounds when starting the OS and you can hear, for example, the noise of coolers, the creaking of RAM, etc., which means you need to check the operation of the monitor and its connecting system unit elements. If you have this problem happened to the laptop - check the cable connecting the display to the motherboard.

Desktop and mobile PCs are equipped with a VGA socket.
You can connect another monitor through this socket. If there is no such socket, then you will need to use the HDMI connector. The main thing is that the connection procedure itself additional display was carried out with the PC turned off.

When normal operation with an additional monitor, you can make a diagnosis of a malfunction of the original one.
With monitor repair yourself ordinary user It is beyond our power to cope, so it is recommended to consult a specialist.

The most difficult part of a PC is the motherboard ( motherboard). There are dozens of components on it, any of which is a fragile and small element. It is not possible for a simple user to identify the cause of a motherboard malfunction, since this requires special diagnostic equipment.

Mechanical damage occurs when incorrect installation to the motherboard of PC components, for example, RAM sticks, cards, as well as the processor itself.
Even a simple case of a needle or a piece of wire getting on the surface of the motherboard leads to the failure of expensive equipment.
Upon careful examination, sometimes you can identify defects in contacts in slots, crumpling (swelling) of resistors, broken tracks (scratches), darkening of some areas on the motherboard, but without the skills and tools to repair the component, it is not recommended to carry out resuscitation actions on your own.

Sometimes even the burning smell coming from the computer case can tell you what the problem is.

Similar problems apply to video cards, which after mechanical damage usually need to be replaced with new ones.

Although the most terrible situation, when the motherboard fails, has already been considered, but no less an unpleasant surprise is also a breakdown hard drive. Moreover, there is not even a cursor arrow on the monitor.
You should diagnose the hard drive and, perhaps, you will be able to save the data stored on it. important information. In case of negative diagnostic results, all that remains is to buy another HDD or hard drive for your PC.
You can understand that it is the HDD that is broken (if it is impossible to boot the PC) by the smell of burning, strange sounds from the HDD during its operation, or in the absence of minor vibrations or heating during its operation.

The easiest and most effective way to remove a black screen

If you can’t start in BR (safe mode), then it’s easier to get rid of the black screen standard reinstallation OS. As a result, the user receives a stable working system. It is convenient to use for this purpose bootable USB flash drive by creating it in the Rufus utility.

The application is free and fully Russified, and most importantly, tested by millions of users.

Why does a black screen appear when launching games or steam?

Gamers are the most likely to experience crashes. Even the acquisition official versions games does not guarantee the absence of errors and black screens. Most often, the weak link is the video accelerator and problems with drivers, as already noted above in this guide.

Therefore, first of all, it is advisable to perform a job analysis graphics adapter, for example, the FurMark application. It will provide information about the video card model and its operating modes.
The program “ Game Booster" Gamers are recommended to regularly analyze the operation of the video accelerator using these software.

Based on the results of the analysis, the user will know what measures need to be taken, for example, upgrading drivers.
Also, failure to launch games occurs if there are problems with other PC components, which often overheat under increased load. It is necessary to clean them from accumulating dust and change thermal paste, otherwise heat is dissipated less efficiently.
Gamers for popular games We have developed standard algorithms for eliminating failures in the form of a black screen. They will be discussed further.

Solving the black screen problem when starting Far Cry 4

To solve this problem you need to follow these 5 steps:

Open the page “www.playground.ru/files/far_cry_4_extreme_inject” and install the patch;
Disable antivirus software;
Extract the contents of the patch into the “bin” directory;
Run " Extreme Injector v3.exe";
Ready. Now the game will open normally and work without failures.

Getting rid of the black screen when starting watch dogs 2

Follow 4 steps to solve black screen problem for watch dogs 2:

Launch the toy;
After the black screen appears, click Alt+Enter;
Through the game menu, make adjustments to the screen resolution;
Ready.

Simply lowering the resolution quickly resolves the glitch.

Black screen when watching videos on the Internet in Windows - what to do?

If a black screen appears when watching a video and interferes with your enjoyment online broadcast favorite content, the following steps will help:

Right-click on the video;
Click “Options”;
Uncheck the box in the menu that appears;
Click “Close”;
Exit the Internet browser;
After restarting the video in the browser, the crash will no longer bother the user.

Black screen YouTube: How to remove the black screen on Android when watching a video from YouTube (but there is sound)

You can get rid of the black screen on your Android phone when playing a video by installing updates for YouTube.

If this does not help, then you need to do the following:

Clean the CoolPlay services using one of the “cleaner” utilities;
Disable mobile data reception and transmission on the device and deactivate the Wi-Fi module;
Enter settings;
Go to Applications - all;
Delete GooglePlay data;
For the YouTube application, also clear all data;
Next, delete the cache in the Memory tab;
Close all running menus and reboot the gadget;
Connect to the Internet;
Ready.

What if when you turn on the laptop there is a black screen and cursor?

If there is an arrow on the screen, then you can fix the problem using software methods.

Adjusting the software settings:

Disconnect the laptop from the network and remove the battery;
Hold down the power button for about 10 seconds;
Connect to the power supply (remembering to install the battery back; it is recommended to first wipe the contacts with alcohol);
Turn on the laptop;
Click start on normal mode;

Programs designed to remove the black screen of Windows

In addition to the programs mentioned above, the “RemoveWAT21” utility effectively allows you to fix failures in Windows 7 computers due to activation problems.
Steps:

Install the utility;
Remove activation;
Reactivate and disable system license analysis;
Ready. Now a black screen due to failed activation will never appear.

The described utility is equipped with a manual, so even beginners will not have any difficulties after installing it.
Also one of the most multifunctional programs is AVZ, the use of which has already been introduced above. An antivirus program can eliminate most of the causes of the error in question.

How to remove system selection at boot, what settings do you need to go to for this? Hello friends! This question is asked very often on the site. For example, you installed a second operating system and when you boot the computer, a menu for selecting operating systems immediately appears for 30 seconds. Of course, such a menu will not be useful to everyone, since the old operating system many people don’t need it and therefore many users try to get rid of it at all costs unnecessary menu downloads.

How to remove system selection at boot

In this case, you can go in two ways, the first is, which is used in operating rooms Windows systems Vista, and, and it is described in another article. The second way is much easier and any user, even a beginner, can handle it, so I propose to consider it here.
In our article I will tell you how to remove the system selection when loading Windows 7, Windows 8 and.

How to remove the system selection from the menu at boot Windows boot 7

Start - Run

Another way to remove the choice of operating systems when loading Windows 7

Start-->Control Panel-->right-click on “Computer” and select “Properties”

then " Extra options systems",

Uncheck the box "Display a list of operating systems" and click OK. Apply. OK.

How to remove the system selection from the Windows 8 boot menu when booting

Right-click on the Start menu and Run

Enter in the input field msconfig command

In the window that opens, go to the Download item. We see two operating systems. Our current default operating system is second on the list. We don’t touch it, go to the first one and select it with the left mouse, click on the Delete button, then Apply and OK.

That's it, now when you boot Windows 8 there will be no choice of operating systems.

Another way to remove the choice of operating systems when loading Windows 8

Right-click in the left corner of the desktop and select “Control Panel”

Then System and Security.

System,

Uncheck the box "Display a list of operating systems" and click OK.

Apply. OK.

How to remove the system selection from the Windows XP boot menu when booting Start-->Control Panel-->right-click on the "My Computer" icon and select "Properties"

Uncheck "Display a list of operating systems" and "Display recovery options" and click OK.

Apply. OK.

As for Windows XP, you can edit the boot menu in this operating system, follow the link and read our article.

Hello, friends!
Is it possible to change it yourself? standard screen greetings (downloading) Windows on yours and how to do it?

In this article I will talk about the three most simple and available ways screen replacement Windows greetings to any of your images.

Method 1 – Tweakslogon program

Tweakslogon– the simplest tool for replacing the screen saver when logging into Windows. All you need to do is launch the program, click “Change Logon Screen” and select any picture you like. program.

Attention! Your drawing should be no more than 256Kb. Don't know how to fit right size? I recommend reading my article “How to resize an image using a program Microsoft Paint». .

To see what you got, just click “Test” in the program window or the key combination Ctrl+Alt+Del.

Method 2 – Windows 7 Logon Background Changer program

Windows 7 Logon Background Change– the program allows you to select any image that will be automatically optimized and adjusted to change background picture. You can download the version of the program either from the official website www.julien-manici.com.

Create separate folder for pictures and fill it with your photos or any pictures in good resolution. The quantity is at your discretion, you can have one.

Next, launch the program and click the button → Choose a folder. Specify the folder you created. If you did everything correctly, your pictures will be loaded in the bottom slider. Choose the most suitable one and click Apply. Now evaluate what happened by pressing the key combination Ctrl+Alt+Del.

Method 3 – Editing the Registry

This method is for inquisitive minds, when simple means not interesting. You can learn about what a registry is and why it is needed by reading the article. In the seventh Windows versions, you can change the Windows boot background using the operating system itself. To do this, you need to make small changes to the registry.

Start → Regedit in the search bar → Enter. If enabled (User Account Control) confirm the action by clicking → Yes.

We are interested in the HKEY_LOCAL_MACHINE parameter, click on it right key mouse → Find. In the search window, enter OEMBackground (uncheck all options except parameter names).

The section will open:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\Background.

We are interested in → open it by double-clicking the left mouse button. In the "Change DWORD Value" window, change the value from 0 to 1.

Now let's create a couple of folders. Go to: C:\Windows\System32\Oobe and create a folder named “info” (without quotes), in this folder create another one named “backgrounds” (without quotes).

Sometimes there are cases when, instead of the usual loading of the operating system, a menu for selecting options appears on the screen. Typically, this situation may occur if you have multiple operating systems installed on your computer. But not always. Sometimes even if only one OS is installed, this menu still appears. Of course, this is very inconvenient. After all, choosing a boot mode every time gets pretty boring. Of course, if you don’t select anything, the system will start booting normally, but it will take longer to start the PC.

You will need

- a computer with Windows OS.

Instructions

If you have several operating systems installed on your computer, but you use one of them much less often, then you can remove the start menu in this way. Click on the "My Computer" icon right click mice. Next, select “Properties” and go to the “Advanced Settings” tab. In the window that appears, find the “Download and Recovery” section. In this section, click on “Options”. Next, click on the arrow at the top of the window and select the operating system that will work by default.

Then find the line “Display a list of operating systems.” On this line, uncheck the box and click OK. Close all windows by clicking OK in each one. Now there will be no window with a choice of download options. Your operating system of choice will load instead. If you need to return the window in which you can select the OS and boot selection options, then simply check the “Display OS selection” checkbox again.

If you need to use the second OS rarely, then you don't necessarily need to return it to the boot window every time. Just press F8 or F5 when you turn on your computer. A window will appear in which you can select the operating system you need.

If you have only one operating system, then you can remove options for loading it this way. Click Start. In the list of programs, select All Programs. Next, open “Standards”. Standard programs have a “Command line”. Run it, then enter the command msconfig.exe and press Enter. After a few seconds, the System Configuration window will appear.

Select the General tab. There is a section called “Launch Options”. In it, find the line “Normal startup”. Check this line. Then click “Apply and OK”. The window will be closed and the settings will be saved. Restart your computer. The next time you start the operating system, it should boot normally.

Tip added June 4, 2011 Tip 2: How to remove the boot menu After reinstalling the operating system or installing a second OS on one computer, the system boot procedure changes. During the boot process, the OS may offer you a choice of one of the installed systems. Sometimes this list also contains links to operating systems that are no longer physically available. hard drives computer. There are ways to change the system configuration to eliminate this selection menu from the OS boot protocol.

Instructions

If you are running Windows 7 or Vista, you can do this: first open the program launch dialog. To do this, press the combination WIN keys+ R or click the Start button and select Run from the main menu.

In the “Run a program” dialog, type the command “msconfig” (without quotes). You can copy it from here and paste it into the input field (CTRL + C and CTRL + V). To execute this command to run, click the "OK" button or click Enter key.

In the “System Configuration” window that opens, go to the “Download” tab. In it you will see the same list of OS that is offered to you in the boot menu when the system starts. Delete the extra lines and click OK.

Eat Alternative option, which can be used both in Windows 7 and Vista, and in Windows XP. After logging in, press the WIN + Pause key combination. This action will launch the System information window (in Windows XP - System Properties).

For Windows XP this step is not necessary, but in Windows case 7 and Vista, in the left pane of this window there is a link “Advanced system settings” - click it. This will open a window with the title “System Settings”.

The system settings window will open by default on the “Advanced” tab, the bottom-most section of which is called “Boot and Recovery” (on any OS). Click the "Options" button in this section.

In the next window, in the “Operating system loaded by default” drop-down list, select the one you need. After that, uncheck the box next to “Display a list of operating systems.”

All you have to do is click the “OK” button to commit the changes made to the OS configuration.

Sources

how to remove alphabet from menu

How to remove the boot menu - printable version Rate the article!

When installing a new Windows OS on a computer, many novice users often forget to format their hard drive. Everything would be fine, but if you miss the right moment, as a result, every time you start your PC you will have to admire a meticulous system window asking you to load one of the two installed versions of the operating system. Kind of reluctant, right? In this case, in order to return to normal startup computer, you will first have to figure out how to remove OS Windows 7 from your boot manager. And, let’s face it, there is more than one way to do this.

Option #1: Troubleshooting the System Configuration Utility

The Windows Boot Manager can also be reconfigured using the System Configuration program. You can launch it using various methods:

One way or another, after performing each of these actions, the system window we need to work will appear. In it, go to the “Download” tab, select the operating system suitable for automatic startup and click the “Use as default” button. After that, we return to the list, click on the unnecessary boot entry and delete it by clicking on the “Delete” option. The final touch is to save the settings by pressing the OK button:

As practice shows, as a result of such simple actions Problems with loading Windows OS disappear instantly.

Option No. 2: Debugging startup using the “Command Line”

You can also remove the intrusive list of operating systems when you boot your computer through the command line. Today there are a whole lot of ways to launch it (read about them here), but in Windows 7 the easiest way to do this is to use search query in the Start menu.

What are we doing? Press on the keyboard and enter in the search bar cmd value or "command". As a result, the system will automatically display the program we need at the top of the list. Click on it twice, and then type in the commands one by one, alternating with Enter:

For Windows destinations 7 default operating system:

bcdedit.exe /default (current)

To remove a second Windows OS (for example, Windows XP from Boot Manager):

bcdedit.exe /delete (ntldr) /f

After completing the commands, close the window and restart the computer. In principle, after this setup, Windows should boot as usual without displaying a list of available operating systems.

Option No. 3: Setting up startup through “System Settings”

You can remove the second operating system when you boot your computer in a matter of minutes straight from your desktop. To do this, right-click on the “Computer” shortcut, select “Properties” from the menu that appears, and then click on the “Advanced system settings” tab in the new window:

Next, go to the “Advanced” section and click the “Options” button opposite the “Download and Recovery” item. After this, select the operating system suitable for loading, turn off the list display and save the changes by clicking OK:

As a result of such simple manipulations, Windows 7 will boot without any delays or failures. However, if a miracle does not happen, to debug the computer’s startup, you can either use a special program EasyBCD, or check the hard drive for errors. In the latter case, the procedure will be as follows:

open the command line (see option No. 2);
enter the command CHKDSK C: /F/R into it and press Enter;
give permission to check by pressing the Y button;
close the command line and restart the computer.

As a result, when new download the system will automatically search for and correct errors on drive C, including those related to Windows startup. If this method does not work, you will have to pick up a bootable flash drive (disk) with the operating system and repeat the Windows installation process, not forgetting in this case to format the hard drive.

30.07.2012 19:28

Since users keep asking me how to remove unnecessary entries from Windows 7 Boot Manager, I decided to tell you about all the methods I use.

Removing the Windows Vista/7/8 boot entry

1. Log into the operating system whose boot record does NOT need to be deleted. You must use an account that belongs to the Administrators group. This may be an account created during the process Windows installations 7.

2. Press the Windows key combination +R, enter msconfig and press OK.

3. In the window that opens, go to the tab. Look at the boot record of the operating system you are currently in - it is labeled as Current operating system (Current OS in the English version of Windows 7). If the current OS is not set as the default boot OS ( Default OS), click its name and click the button Use as default (Set as default).

4. Highlight the name of the boot entry you want to delete and press the button Delete.

5. Click OK and then - Exit without reboot.

Removing all Windows XP boot entries

XP boot entries do not appear in msconfig, so they are removed from Boot Manager in a slightly different way.

1. Log into Windows 7 using an account from the Administrators group. It could be Account, created during the Windows 7 installation process.

2. Open the menu Start › All Programs › Accessories, right click the icon Command line and select Run as administrator.

3. Enter one by one following commands, pressing the Enter key after each of them*:

%windir%\system32\bcdedit.exe /default (current)

%windir%\system32\bcdedit.exe /displayorder (current) /addfirst

%windir%\system32\bcdedit.exe /delete (ntldr) /f

* To find out the purpose of a command, hover your mouse over it.

4. Close the command prompt window.

If you can't run these commands, unzip the file it contains DeleteXPfromBCD.bat to any folder on your hard drive and.

EasyBCD

Although the previous two options are the most correct and recommended, you can use the EasyBCD program if some entries are not deleted or you only need to delete some XP entries.