The system's graphical interface does not work. Download the system interface for Android. “An error occurred in the system graphical interface” application, how to fix it in Android

Software errors in the Android operating system occur quite often; most users find unpleasant moments in use. Today’s article is devoted to the problem of the operating system in which the message “system graphical interface error” pops up on the screen. Over the course of the article, we will look at possible problems, and then we will give advice on how to eliminate this problem.

An error occurred in the GUI application - reasons

After collecting information from various Internet resources, we identified common causes of the error.

How to fix GUI errors

Now that we’ve sorted out the reasons, let’s talk about ways to resolve the conflict. Try to remember whether the error appeared after installing an application or whether it popped up “suddenly”.
If the message appears after installing the software, we recommend the following operations:

When a graphical interface failure is caused by a virus, the situation becomes more complicated; everywhere they immediately advise doing a general reset to factory settings - this helped few people and here’s why.

Master reset when problem solved

Master reset - will return the smartphone configuration to factory settings. In other words, all third-party programs and information will be deleted. The theme, language and account settings will be reset. When malware penetrates the device, it deletes some files embedded in the system, system files. By performing a master reset, you will roll back the settings, but the deleted files will not be restored.

Flashing a smartphone

Reflashing is a 100% proven way to combat this problem. Mentally come to terms with the fact that you will have to delete all your data; first save your contacts, photos, and music.

Applications and games can be easily downloaded in a couple of hours from the Play Market.
If you have recovery installed on your phone, flash it from there. To get into recovery with the phone turned off, you need to hold down the “volume +” and power button. When the menu opens, use the volume keys to select and activate the “Wipe data/Factory Setting“ item.
If the words recovery and firmware are not familiar to you, there is a lot of information on the Internet for any phone; you should flash it with caution so as not to turn the phone into a brick. If you don’t have the time or knowledge to dig, entrust this matter to professionals or a service center.
I hope you have figured out the reasons why the system’s graphical interface application crashes and know how to fix the situation. If you know proven ways to resolve this conflict, write in the comments, we will definitely supplement our article with them, ask questions.
A short video on how to fix it for 5 versions of Android firmware, test it for your system.

In the article: what is DirectX, fixing the error “Graphical interface error. DirectX is not available."

What is DirectX

DirectX is a set of APIs designed to solve problems associated with programming under Microsoft Windows. Most widely used in writing computer games. Often, updated versions of DirectX are shipped with game applications.

Causes and solution

In fact, there are only 2 reasons for the error to appear with DirectX and, consequently, 2 solutions. Most often, Windows 7 users encounter similar errors, since all versions of DirectX above 9.0 are not supported by this OS. It is also possible that a game requires Direct 11.1, but the computer’s video card only supports 10 or 11. In any case, the problem is either in the video card or in the DirectX library.

Problems with video card drivers

They may be outdated or broken, as a result of which the DirectX library may not work or be unstable.
To solve the problem it is necessary download the latest drivers for your video card from the manufacturer’s official website.

Download NVIDIA drivers

Download ATI/AMD drivers

Download Intel drivers

Problems directly with the DirectX library itself

In this case, you need to download the required version of DirectX from the official Microsoft website using the link below.

Smartphones based on Android can safely be called reliable devices. However, their owners are not immune from annoying OS errors. One of them is related to the Android system UI. We will tell you what this is and how to fix this problem later in the article.

How does the error manifest itself?

This system bug is mostly noticed by owners of Samsung gadgets. A pop-up message appears on the device screen with the following content: “The com.android.systemui process has been suspended.” When might it occur?

You pressed the "Home" button, turned on the camera, launched the game, application, and went to the Play Market.

What is this Android system UI? The phrase com.android.systemui denotes a service that is responsible for the correct settings of the user graphical interface in Android. It is one of the main ones, which is why it is highly undesirable to disable it.

The appearance of such an error on phones is a massive phenomenon. It appears especially often after clicking on Home. Samsung owners associate this bug with the latest “crooked” update for the platform. This caused the problem of working both with this service and with a number of others.

If the “Android System UI has stopped” window appears, what should I do? We will present you three effective ways to fix the problem.

Solution one

We have figured out that this is the Android system UI. Now let's see how to restore the service to work correctly:

Go to the Play Store application. Type Google in the search bar.
The application of the same name will appear first in the list. Remove it.
Next you will see a similar window: “Do you want to remove all updates for this program?” Confirm this action.
Press the "Home" key again, turn on the camera, go to the application, when entering which the error popped up. If now the annoying window does not appear, then the problem is solved.

When these actions do not lead to anything, you should deactivate auto-update in the settings. This action will help avoid the bug from appearing before the new update for the Android OS.

Solution two

Many people ask: "When an error occurs related to the Android system UI, how do I reboot the device?" We advise you to go a slightly different route:

Go to the settings menu, find the "Applications" section.
Now click on the "Menu" button.
In the list that appears, select “Show system applications”.
Among the presented ones, find “System Interface”.
Go to its "Memory" section. Clear all data as well as cache.

After these manipulations it should disappear. If this does not happen, then you can think about taking such a radical measure as resetting to factory settings. But before that, be sure to make a backup copy of all important data stored on your gadget.

Solution three

If, when figuring out that this is “Android system UI has stopped,” you remember that such an inscription appeared on the smartphone screen earlier, long before the release of the ill-fated update, then you need to go a different way:

Go to the "Settings" menu, scroll to "Application Manager". We will need the "Everything" tab.
In the specified section, find "System UI".
First of all, click on the “Clear cache” button.
After this action, tap on “Stop”.
Now restart your smartphone.
Then you will need to log into your Google account that is associated with this device and restart it. This is done simply: turn it off and synchronize it with your phone again.
Next, you should receive a message informing you that new updates are available for your gadget. Try to apply them as soon as possible.

That's it, the problem is solved once and, hopefully, forever!

A bug related to the Android system UI may have several reasons. If this happened after a recent update of the device, then the solution occurs according to the first two presented schemes. If the reason is not obvious, then it is better to deal with the bug according to the latest instructions indicated in this material.

Before you start updating your operating system, make sure your device is fully charged. It is important to exclude the possibility of shutdown. You can connect the gadget to the charger during the procedure. If your tablet or smartphone turns off during a firmware update, system and data loss will occur.
Check the version of the Android operating system that is current for your device, and also find out what firmware is currently installed. You can clarify this information in the device settings in the “About phone” section. Pay attention to the Android version, kernel version and build number.
Now, based on this data, you need to find and download new firmware that will fully match your smartphone or tablet computer model.
HOW TO FLASH ANDROID USING A COMPUTER
It should be said that there are several ways to flash Android and in this article we will look at the most common ones. Let's start with flashing the gadget's firmware using a special program that is pre-installed on the computer. There are many applications that allow you to install a new version of the OS on your device, but we decided to focus on the Fastboot program, since it is safe, convenient and reliable, and is also best suited for the model that we will be flashing as an example. So, let's figure out how to reflash Android using Fastboot.
Note: the program for flashing Android should be selected based on the device from which manufacturer you are using. We recommend that you familiarize yourself with the following program list
First of all, you need to download this application. There will be no problems with searching for Fastboot; you just need to know how to use search engines, and everyone can do this today. Download the program and unpack it to the root of drive C so that the path to the file looks like this: C:\Android.
The “Tools” folder contains the necessary utilities, and the “Driver” directory contains drivers. Now you need to connect the device that you plan to reflash to the computer and install the driver. As a rule, the device automatically finds the necessary drivers, but sometimes this does not happen. In this case, you need to open the website of the manufacturer of your smartphone or tablet and download the software. Please ensure that the firmware you plan to download is suitable for your gadget model. The firmware must be downloaded in .zip format and placed in the Tools folder, which is located here: C:\Android.
Before flashing Android, you need to unlock the bootloader on your device. The bootloader unlocking process will differ depending on the specific gadget model. Open the Start menu on your computer, enter “cmd” in the search bar and select the cmd.exe program.
In the Command Prompt window, type cd C:\Android\Tools. Confirm the command by pressing the Enter key, after which you will find yourself in the “Tools” directory.
Now you need to enter the following command: fastboot devices.
If you were given a device code, then fastboot has identified your smartphone or tablet and you can start flashing the Android. If the message “waiting for device” appears in the window, you need to turn off the gadget and install the drivers. Now you need to enter the command for flashing: fastboot update firmware_file_name.zip After this, flashing will begin. Don't forget to restart your device after the operating system update is complete.
HOW TO FLASH ANDROID VIA RECOVERY
Another way to reflash Android is to use standard recovery or custom recovery (TWRP\CWM). We will explain what custom recovery is in more detail below. In short, these are unofficial firmwares. So, find the firmware that suits you on the Internet, download it and save it to the root of the file system of your device.
Reboot your device into recovery mode. Login process

Faced with a notification on your tablet or smartphone: " an error occurred in the com.android.systemui application"? Or are you looking for information about similar errors? In any case, in this article you will learn:

detailed information about the reasons for the application error;
troubleshooting instructions.

So, the com.android.systemui process has stopped, what should I do in this case?

What is this application?

com.android.systemui is a system application that is responsible for correctly setting up the graphical user interface in the Android shell. The service is essential, so disabling it may have undesirable consequences. Basically, this kind of error can appear due to:

conflict with applications installed on the smartphone;
software failure;
presence of a virus in the Android device system.

Important! Owners Samsung smartphones, after a recent update, we encountered this error en masse. It appears after pressing the Home button. This is all due to crooked system updates of some Google services. If you have not flashed (rooted) your gadget, go straight to the " " point.

How to determine whether it is a virus or not?

How does the virus manifest itself? It disguises itself as a system file and starts downloading unknown third-party applications, which in turn display advertisements on the smartphone itself. Often this is intrusive advertising, and sometimes of an obscene nature. A Trojan may appear in the system when:

custom Android firmware;
downloading applications from unknown sources;
downloading “one-day” applications from the Play Market, etc.;
downloading and subsequent launching of malicious files from the Internet, email, instant messengers, etc.

Remember if anything similar happened to your device before the error appeared. Also check the creation date of the com.android.systemui file itself (via the standard application manager, in properties). If the date coincides with other system files, then most likely there was an error in the operation of the system file. If the file appeared recently, it is probably a virus.

Advice! On Android devices, the error code carries certain information. For example it means that: com- error in the system application, phone- a malfunction in the standard "Phone" program.

Troubleshooting a system error

If, during the data analysis process, nothing indicated a virus, there was probably a simple error in the system file. The error may not appear again after rebooting the system, so reboot Android first. If this doesn't help, try the following steps in order.

Uninstalling Google updates

Follow these steps:

date and time

To configure the date and time manually:

Data cleaning

Advice! If you want to learn in detail what a cache is, why it is needed and why it is cleared, check out.

To clear application data:

Factory reset

If the previous methods did not bring results, reset the system to its factory state. Such a reset deletes all personal data and returns the tablet, smartphone or other Android device to its original state. To save data (saving all personal data). Built-in functions of the operating system or special applications, such as Titanium Backup, can help create a backup. In order for the program to make a backup, it needs to be granted root rights (administrator or superuser rights).

The reset can be done in two ways:

Virus removal

Having determined that there is a Trojan in the Android OS, you need to remove it. It is likely that a malicious application was loaded on the system before the error appeared. You need to get rid of it first. Find out what the program is by searching for it by installation date. For this:

In general, that's all. If you have any questions, leave them on this page in the comments. Also write down how you solved this problem and how interesting your dance with the tambourine was.

P.S. Good luck to all readers, and let your Android assistant always remain operational!