Review of SSD Mini Tweaker for Windows. SSD Mini Tweaker Review

The pressing problem in Windows is the lack of normal interaction with the SSD drive. The OS is designed for HDD and another view that is relevant today is simply ignored, which is why it appeared. Of course, the system’s shortcomings did not go unnoticed by enthusiasts, and they independently tried to configure Windows to correctly access the SSD; this is the main goal of the utility. It is worth noting that the device will work without configuration, but there are some restrictions.

SSD Mini Tweaker for Windows

In the SSD utility Mini Tweaker 14 collected for Windows 7 automatic tools adjusting the system for storage processing. They are necessary for more correct interaction between the operating system and the drive. Manually changing multiple parameters, disabling services, etc. is a rather lengthy process that the average user will not perform.

The process of use is as simple as possible; you just have to select the necessary points and the action will happen independently. To use the program you need:

Download the utility;
Run the unpacking program, and then the utility itself;
Select in the window required parameters for execution;

Then click on “Apply changes”.

In fact, the application is rich in all sorts of functions; it contains all the necessary keys to extend the life of the SSD and make its use as convenient as possible.

Having figured out how to install SSD Mini Tweaker and run it, you should move on to a more pressing issue - to understand the functionality of the utility, what each item affects and, accordingly, draw a conclusion about the feasibility of the procedure.

Trim is a type of message exchange between the system and the SSD, so the drive manages to receive timely information about the completion of work with some files that can be deleted without user intervention. If the function is not used, then during operation the speed of the SSD will gradually decrease due to the scattering of garbage across the cells, even after deletion, the data will be scattered, you will only have to defragment the disk. TRIM allows you to maintain high speed and reduces the load on memory cells;
Superfetch is a system feature that allows you to analyze the most frequent accesses to operations and data. When target information is determined, it is cached in RAM, which increases the speed of operation. This feature is useful for HDDs, and SSDs already respond quickly; such caching only loads RAM separately;
Prefetcher is a process that is responsible for acceleration Windows startup. It shapes third party files in the system, which requires extra bed. For SSD, the functionality is absolutely useless;

Save the system core - when Windows work, especially when it goes into sleep mode, hibernation, etc. The system saves its processes to disk. This is certainly useful, but requires inclusion in SSD operation, thus greatly wasting his limited resources. You can force them to change their behavior and save everything in RAM, you just need to have 2 GB or more random access memory;
Increasing the size of memory allocated for caching - the system allows you to create space for recording intermediate results computer operations, which are the same for frequent processes. Allows you to reduce the frequency of using new blocks on the disk, but somewhat reduces the amount of memory allocated for the system and its services;

Removing the restriction on the use of file NTFS systems, thus speeding up the processing of multiple pages that can simultaneously write or read data. The speed of work increases, but this requires more RAM;
Defragmentation is a useful procedure, but only for HDDs when the chaotic arrangement of blocks changes and they are structured. For an SSD, this is absolutely useless and, moreover, even harmful, the function responsible for system defragmentation is disabled here;
Removing Layout.ini. Present on Windows special function For quick construction downloads. When the computer is idle, a file is generated every 3 days, which acts as a preliminary selection of applications shown for downloading. The built-in defragmenter resorts to the file and sets the optimal location to place the specified files. Absolutely useless when using an SSD;
Forming a name for file units of the “8.3” type. Long names somewhat slow down the processes of searching and calculating folders, it is better to disable the function;
Disable indexing. Standard function search in Windows creates some selection for further more quick search By keywords. It makes sense to disable the function, since the speed of the SSD fully covers the need for a quick search;

Stop. This method of turning off the PC is quite convenient, but it creates a hiberfil.sys file, which sometimes takes up to 10 GB of memory (corresponding to the amount of RAM), thus reducing the load on the drive and freeing up space;

Disable system protection. It includes restoration and rollback to previous points. Creating backups allows you to be safe from possible data loss, but operations are performed on the SSD and it takes up a lot of space. Backups can be stored and subsequently occupy up to 15% of the total disk volume; in the long term, a decrease is possible SSD performance;
Disabling defragmentation by completely stopping the corresponding service;
- This additional resource systems, used when there is insufficient RAM and more. Since it contains temporary information, Windows clears it every time you reboot. It's better to turn it off this function, then the system startup/shutdown speed will increase.

You can enable it in the system, what does it have to do with it? useful feature for both HDD and SSD. Windows is becoming more smart system, which uses a certain algorithm for using files and grouping them, which speeds up the work somewhat.

In fact, if you don’t go into details, you can check all the boxes and enjoy the minimalism of disk use, but then situations may arise that you cannot use certain functionality, for example, system recovery, and you should know about this in advance.

If you have any questions about the topic “Review SSD programs Mini Tweaker for Windows, you can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>

As SSD drives appeared on the market, many third-party programs for Windows, which interact directly with its settings, were replenished with functionality that optimizes the system for working with this device. Older people need this kind of programs more Windows versions, because the modern versions 7, 8.1 and 10 for working with hard drives new format are optimized as usual. But even in the last three versions of the system, you can correct some things.

An impressive selection of tweaks to increase the lifespan SSD services and its operation at maximum performance is collected in a free, narrow-profile utility SSD Mini Tweaker, designed for Windows optimization 7, 8.1, 10. What features does the utility offer? Which tweaks can be used in specific cases?

SSD Mini Tweaker launches with two pre-installed checkboxes, they are universal. Other options are not checked; these tweaks should be used depending on the situation. In the screenshot below, the utility tweaks are numbered to make it easier to navigate. Let's deal with them in order.

Trim is standard Windows function 7, 8.1 and 10, which is responsible for physically deleting information by erasing it from the storage cells. Thanks to Trim removed in the environment operating system data does not waste cells, which in turn prevents the speed of writing new data from slowing down as it fills up disk space. The function should activate itself when connected to computer SSD. Option enable Trim is preinstalled in the utility in case for some reason its activation does not occur. In any case, leave the first tweak ticked.

2. Superfetch

Disable system service Caching frequently used files Superfetch is only needed for Windows 7.

3. Prefetcher

The same situation with Prefetcher service, which works to speed up the launch of the system and programs: we put a tick only for “Seven”. IN Windows versions 8.1 and 10, the mechanism of operation of both services has been improved and adapted to the specifics of SSDs.

4. System core

In case of default Windows settings its core (basic software part) in order to free up the RAM resource, it is unloaded into the swap file. A tweak in the form of prohibiting such uploading on computers with HDD is used to optimize the operation of Windows itself. In the case of SSDs, this setting aims to reduce disk access and, accordingly, data rewrite cycles. We will use this tweak only if there is excess RAM of 2 GB. Accordingly, it should be at least 8 GB in total.

5. File system cache

Larger cache size than default in Windows file system, will also minimize access to hard drive. But, as in the previous case, you need a good RAM rating. We tick this tweak if the computer has 8 GB or more RAM. At the same time, 2 GB is regularly idle.

6. Removing the limit from NTFS

Another tweak for cases of excess RAM is removing the limit from NTFS in terms of its use. In this case, more processing operations will be cached in memory, and access to the SSD will be reduced.

7. Defragmentation of system files

Contrary to popular belief that defragmentation is harmful for SSDs, disable it to system files carried out when the system boots, is not necessary. Why this is so, we will consider in detail below, in paragraph 13, where we will understand the meaning of this procedure for all areas of the computer.

8. Layout.ini file

Disabling the creation of the Layout.ini file, which is responsible for storing history open source software, folders and files, we use it in all cases. This is a tweak to save a small part of the SSD resource, however, for the latter such a mechanism for predicting user preferences is not needed.

9. Names in MS-DOS format

In order to improve the performance of the NTFS file system itself, some people disable the function of creating names in the MS-DOS format. It has no effect on SSD resource, A reverse side Using this tweak may cause malfunctions individual programs. It is recommended not to use this utility option.

10. Data indexing

Indexing Service Windows data Search is useless for SSD, but needed for HDD. If the latter is connected to the computer assembly, do not check the box to enable this tweak.

11. Hibernation

Hibernation is an operation that overwrites data. However, we do not use the tweak to disable it in Windows 8.1, 10 (this function is provided quick start computer) and on laptops with any version of the system. We only use it for PCs based on the Seven. Disabling hibernation also frees up disk space extra space(from 3 GB).

12. System protection

If this standard Windows functionality is used, it is better to disable system protection (restore points and rollback to them). Its use significantly affects the wear of the solid-state drive. If necessary, you can resort to third-party backup programs and store files backup copies on HDD or external media.

13. Disk defragmentation

Standard disk defragmentation in Windows 7 is not carried out for SSDs at all. And in versions 8.1 and 10, it is part of a set of background optimization operations to improve performance hard drives any type. As part of the optimization for solid-state drives, their own procedures are carried out related to work Trim. Defragmentation, as Microsoft assures, is carried out using a different algorithm from the HDD. And only if used regular functions using shadow data copying. And this is the same system protection function, “File History”, volume archiving. These are important operations, and imperfect implementation of them can lead to the loss of valuable data. In order not to lose face, Microsoft is trying to insure itself in every possible way, adapting the interaction of Windows with storage media primarily for the sake of security - both the system itself and user data. And only then does the software giant worry about saving SSD resource.

Accordingly, if in Windows 8.1 and 10 you do not resort to functions related to shadow copying, and, as mentioned, there is an alternative in the form third party programs-backups with the ability to select backup storage, then there is no need to disable defragmentation. Moreover, if an HDD is connected to the computer assembly, this procedure is needed for it.

If the issue of disabling defragmentation for an SSD is fundamental, it is better to do it manually. In the utility window, go down to the “Manual Actions” column and click the first item. In the window standard utility disk optimization, select the solid-state drive and click “Change settings”.

Uncheck the drive partition. Click “Ok”.

14. Clearing the swap file

If the paging file has not been moved anywhere and is still located on drive C, you need to disable its cleaning. This is the second preset option of the utility, suitable for all cases. Applying this tweak will reduce data overwriting in the future.

Clearing the page file is an alternative that eliminates the problems that the system becomes susceptible to when it is completely disabled, as other tweakers or advisors on the Internet may suggest. At complete shutdown Regardless of the RAM indicator, some programs designed to work with the paging file may fail.

Having selected the optimal set of tweaks for yourself, click the “Apply changes” button at the bottom.

Tags: ,

The advent of solid-state hard drives, or SSD for short, can certainly be considered a breakthrough in the development of technologies for creating recording and storage devices digital information. The first to arrive SSD market, with the exception of high speed access to arbitrary blocks of information were in many ways inferior to traditional HDDs. Not only could their volumes, without exaggeration, be called more than modest, they also had low fault tolerance and cost a lot of money.

What's wrong with SSDs?

The high speed, quietness and low power consumption of solid-state drives have served as good drivers for their development. Modern SSD drives are lightweight, very fast and quite reliable from a mechanical point of view, devices used in tablets, ultrabooks and other compact devices. The price of SSDs has also dropped significantly. But still, they cannot be called perfect. All SSDs have a significant disadvantage - limited number rewrite cycles.

The flash memory of most SSDs is MLC type and allows you to write data approximately 3 to 10 thousand times, while regular USB They exhaust their service life in 1000 or less rewrite cycles. There are also SSDs, for example, with SLC memory type, which can withstand several hundred thousand rewrite cycles. There are many nuances, so it is not surprising that it is precisely this feature of SSD drives that raises a lot of questions among ordinary users regarding their operation, and most importantly, extending their service life. Is SSD optimization necessary in Windows 7/10 or is it just another myth, created by the manufacturers and developers of commercial software themselves?

Basic training

Yes, you can leave everything as is on a PC with an SSD, and you might be right, but if you really care about your drive and want it to last as long as possible, it's worth considering customizing it. Let's start with whether you bought a computer with an integrated SSD or just the drive itself, which you want to replace the HDD with, transferring Windows from it. In the first case, you can limit yourself to setting up the system. If you install the SSD yourself, be sure to check whether it is included in BIOS mode AHCI connections for SATA controller.

There are two points here: after AHCI enable And Windows migration on SSD system may not boot because it does not have the appropriate drivers. Therefore, either install the drivers ahead of time, or run reinstalling Windows from scratch. Second. IN Old BIOS The PC may not be in AHCI mode. In this case, the BIOS will have to be updated. Now regarding the firmware of the SSD controller. Owners solid state drives people often ask whether the drive will work faster if you install latest version firmware. Yes, it will, but if you decide to update it and in general, if the need arises, it is better to contact the service center for help.

System settings. Disabling defragmentation

Defragmentation is a useful thing for HDDs, but it can harm SSD drives, so Windows usually automatically disables it. However, it's worth checking to see if it's actually disabled. Run with command dfrgui Disk Optimization Utility and click Change Settings.

Make sure the “Run on a schedule” checkbox is unchecked. If it is there, be sure to remove it.

Enabling TRIM

The TRIM mechanism optimizes the SSD drive by clearing memory cells of unnecessary data when removing them from the disk. Using TRIM ensures uniform wear of the disk cells and increases its speed. To check if TRIM is active on your system, run as administrator command line team fsutil behavior query DisableDeleteNotify.

If the value of the returned parameter DisableDeleteNotify will be 0, it means everything is in order and the trim function is enabled, if 1 it means it is disabled and should be enabled with the command fsutil behavior set DisableDeleteNotify 0.

This SSD setup is only applicable to Windows 7/10, while Vista and XP do not support it. Option two: either install more new system, or look for an SSD with hardware TRIM. Please also note that some older models of solid-state drives do not support TRIM at all, however, it is likely that they are still sold in stores digital technology very small.

In the process in the hiberfil.sys file on system disk a significant amount of data can be recorded, comparable to the amount of RAM. To extend the service life of the SSD, we need to reduce the number of write cycles, so it is advisable to disable hibernation. The downside is this SSD settings is that you will no longer be able to save open files and programs when the computer is turned off. To disable hibernation, run the command running with administrator privileges powercfg -h off.

Restart your computer and make sure that the hidden system file hiberfil.sys is removed from the C drive.

Disable file search and indexing

What else can you do to set it up correctly? SSD drive for Windows 7/10? The answer is to disable indexing of the disk contents, because the SSD is already fast enough. Open the disk properties and uncheck “Allow file contents to be indexed...”.

But here's the thing. If in addition to an SSD you have a HDD, then you are unlikely to want to disable indexing on it. What will come of this? By default, the index file is located on drive C and data from drive D will still be written to the solid-state drive.

If you do not want to disable indexing on a custom volume, you will need to move the indexing file from system SSD drive to the user HDD. Open with command control /name Microsoft.IndexingOptions indexing options.

Now click “Advanced” and specify your index location, having previously created user disk folder.

If your PC only has an SSD, you can completely disable indexing and search by opening the service management snap-in with the services.msc command and stopping the Windows Search service.

Disabling system protection

Controversial point. By disabling the creation of system shadow copies, on the one hand, you will reduce the number of write cycles, on the other hand, you will increase the risk of getting a non-working system in the event of some unexpected failure. The use of retractables is one of the most effective and simple ways return Windows to working condition, for this reason we would not recommend disabling this function, especially since points are created infrequently and do not take up so much space.

It does not recommend disabling system protection for your Intel SSDs; Microsoft shares the same opinion. However, it's up to you to decide. If you are using other means Reserve copy, For example, Acronis True Image, system protection can be disabled. To do this, go to system properties, on the “System Protection” tab, select the SSD drive and click “Configure”. Next, in the recovery options, activate the “Disable system protection” radio button, move the slider to zero and click the “Delete” button.

Should I disable the page file or not?

An even more controversial solution is to disable the page file. Some people advise moving it to the HDD, others completely disabling it, but it’s not that simple. The paging file is necessary to optimize the performance of the system and programs that require significant RAM resources. Disabling paging can indeed reduce disk load, but the resulting effect will be very small. In addition, this shutdown can significantly reduce the performance of the computer.

There is little point in moving the swap file to hard disk drive no, either, since it is many times slower than an SSD, and constant access to it by the system will slow down its operation. Disabling, or better yet, reducing the paging file is only permissible in one case - if your computer has more than 10 GB of RAM, and you do not use resource-intensive applications. And so, of course, it’s better to leave everything by default. You can perform all manipulations with the paging file in the performance parameters window, called up in the “Run” window with the command systempropertiesperformance(hereinafter Advanced – Change).

Prefetch and Superfetch

In theory, it’s also better to leave everything here as default. The function does not affect the durability of solid-state drives in any way, since it does not produce any records. Moreover, when Windows installation on SSD, the system automatically disables it. Want to make sure it's disabled? Go to Registry Editor at HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Session Manager/Memory Management/PrefetchParameters and look at the parameter value EnableSuperfetch. It should be set to 0. You can also disable it through the service management snap-in.

As for Prefetch, the disk writes it produces are so insignificant that it can be ignored. However, you can turn it off, nothing bad will happen. To do this, in the same registry key, set the value of the parameter EnablePrefetcher 0.

The same can be said about disabling additional Prefetch functions ReadyBoot, logged application loading process. The volume of records it produces in the folder C:/Windows/Prefetch/ReadyBoot is negligible, but if you want to disable them too, set the Start parameter in the key to 0 HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/WMI/Autologger/ReadyBoot.

Programs for SSD disk optimization

Almost everything that was shown in the examples above can be done using special utilities. How to configure an SSD under Windows 7/10 using third-party programs? Very simple. Most of them have an intuitive clear interface, represented by a set of options that can be enabled or disabled. There are many SSD optimizers, but we will focus only on the most popular ones.

SSD Mini Tweaker

The most convenient portable program for optimizing solid-state drives. The utility supports work with the functions of defragmentation, hibernation and system protection, Trim, Superfetch and Prefetcher, management of the paging file and Layout.ini, indexing, file system cache and some other settings.

The SSD Mini Tweaker interface is represented by a window with a list of functions available for management. After applying the new settings, you may need to restart your PC.

Shareware utility for optimizing and tuning SSD disk performance. There is no Russian language in Tweak-SSD, but there is a convenient one step by step wizard, offering optimal settings. Features of this program include disabling file indexing, Program Compatibility Assistant, hibernation, paging file, defragmentation, recording the last access time of a file, working with TRIM, increasing the file system cache, removing the NTFS memory limit, and moving the kernel into memory instead of unloading parts of modules to disk.

SSD Fresh Plus

Another SSD optimizer. Unlike analogues, it supports working with S.M.A.R.T. data. Via Abelssoft SSD Fresh Plus, you can disable defragmentation, the use of short names for folders and files, timestamps, Windows log,Prefetching services.

IN total the utility supports nine different settings, optimizing the operation of SSDs. Additional features programs include viewing detailed information about the disk. Distributed in paid and free editions.

Conclusion

That's probably all. There are also other recommendations for optimizing SSDs, but for the most part they are either dubious or harmful. In particular, it is not recommended to disable write caching for the SSD disk and the USN journal of the NTFS file system. You should also not transfer programs and temporary files from the SSD. Temp folders, browser cache and so on, because then what’s the point in buying an SSD drive? We need programs to run faster, but transferring them to the HDD will only slow down the system.

And finally, here's some good advice for you. Don't bother too much with SSD optimization. To develop even a budget resource solid state drive 128 GB, you will need at least a dozen years, unless you write and delete terabytes of data every day. And during this time, not only the disk model, but also the computer itself will become hopelessly outdated.

Owners of solid-state drives need to optimize the operating system for the SSD, especially if Windows 10 is installed on it. And all because the amount of time between failures of a drive is limited, ranging from a million hours to several million. If you do the math, this should be enough for a person’s entire life. But no one really knows when an SSD drive will stop working.

In this article, we’ll look at how to properly configure SSD Mini Tweaker for Windows 10, which is actually installed on a solid-state drive. We’ll also look at how to use and what to disable in the SSD Mini Tweaker program. Because optimizing the system for an SSD drive not only extends the life of the solid-state drive, but also increases the performance of the system as a whole.

SSD Mini Tweaker was created specifically to optimize the system for a solid-state drive. The program allows you to disable unnecessary functions and system services that users in most cases do not even pay attention to.

Here the question is not about how to use the program, but what can be disabled using the program. All items present in the program advanced user can be disabled using standard means Windows 10 operating system.

Before downloading the SSD Mini Tweaker program on latest build I had to use the Windows 10 operating system. Because every time I tried to download a file, the system detected it as a virus. You may also have to disable your installed antivirus software.

The author strongly recommends that before using the program you carefully read the help file, which is also unpacked and located in the destination folder. You can also call up help by pressing the F1 key in the program itself.

To use the program, you must run it as an administrator. Next step The user needs to mark system components that he or she thinks are unnecessary and disable them by clicking the Apply changes button. If necessary, you can easily reset all changes using the Ctrl+Z key combination.

Disable SuperFetch

Overall, the service maintains and improves system performance. However, for owners of solid-state drives, this service is completely unnecessary.

Disable Prefetcher

System component that significantly reduces time bootstrap system and application launch. Similar to the previous option, it is absolutely useless for a system installed on an SSD.

Keep the system kernel in memory

When the current item is activated, the system kernel will not be reset to the swap file. You must have more than two gigabytes of RAM.

Increasing the file system cache size

Minimizes file system usage. Likewise, you must have more than two gigabytes of RAM.

Remove the limit from NTFS in terms of memory usage

The function makes it easier to launch several applications at once and improves the performance of the file system as a whole. Recommended for use when large quantities random access memory.

Disable defragmentation of system files at boot

Although defragmenting system files speeds up system loading, it is strictly recommended for owners of SSD drives to disable it.

Disable creation of Layout.ini file

The file stores information used Windows defragmenter. For a system installed on an SSD, it can be disabled.

Disable Windows Indexing System

The current indexing service can only be disabled if you are not using program search. Although disabling the current service will not greatly increase system performance and SSD operating time.

Disable hibernation mode

After activating the current item, hibernation mode will be disabled and the hiberfil.sys file will be deleted. This will free up disk space. For more information about hibernation mode, see ours.

Disable system protection feature

The item disables system protection and the ability to restore the system. It should be disabled only if the capacity of the solid-state drive is small

Disable Disk Defragmentation Service

After disabling the current service, starting the standard defragmenter will be impossible. More details about disk defragmentation can be found in the instructions.

Do not clear the page file

Option to disable clearing the paging file when the system reboots. Recommended when placing the page file on an SSD.

conclusions

The SSD Mini Tweaker program will help you properly configure the operating system on your solid-state drive. If you have not yet chosen an SSD to suit your requirements, then we recommend that you read the review. We also recommend that you pay attention to the instructions if you have not already done so.

SSD Mini Tweaker Portable- free portable program For correct settings Windows systems that use SSD solid state drives. The SSD Mini Tweaker Portable program will be especially useful for those who transfer the operating system from the usual hard HDD on solid state drive SSD. The SSD Mini Tweaker Portable program configures the basic parameters of the operating system for the SSD. Does not require installation, after launch you can immediately proceed to setting the parameters. As you know, SSDs work much faster and more reliably due to the fact that they do not have mechanics (head motors, etc.). SSD drives do not need to defragment and check the read-write of memory cells, such maintenance simply harms them. In an SSD, the more often information is overwritten, the less service life of the media remains. And in the operating system Windows defragmentation And similar programs included in background default. It is in order to correct the shortcomings of the operating system that the SSD Mini Tweaker Portable program was created.

Working with the program is very simple, you just need to check the boxes that interest you, then you can save the parameters. For example, it is worth disabling SuperFetch - the utility should maintain and improve system performance. However, the author warns that this is unnecessary for an SSD and should be turned off. It’s also worth turning off Prefetcher - the utility will help launch programs faster, but for SSDs this also needs to be turned off. If you have a large amount of RAM, then you should “Remove the limit from NTFS in terms of memory use.” This should also improve file system performance.

SSD Mini Tweaker Portable

Allows you to configure 14 parameters, many of which can really improve system performance and extend the service limit of the SSD drive.
Attention!!!
Do not delete keys whose parameters the program changes. This may cause the program to malfunction and unstable work systems! And also do not block access to the registry with any program, otherwise the corresponding error will be displayed and the application will be closed.

The portable program SSD Mini Tweaker Portable can be downloaded for free from the file-sharing sites TurboBit.net, Fayloobmennik.rf or StoreFiles.ru. Links to which are at the very end of this article.

SSD Mini Tweaker Portable Software, works with any external media. After work, all traces from the system will be deleted.

Utility name: SSD Mini Tweaker Portable
Operating system: Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10
Interface language: Russian
Activation of the utility: No activation required, the utility is distributed free of charge
Official site: http://spb-chas.ucoz.ru
Portable program: EXE
Size: 2.35 MB