How to change mouse sensitivity on Windows 7. How to make the mouse less sensitive. How to change mouse sensitivity

Each of us has a certain speed of movement of the mouse cursor. However, I noticed that no matter what the speed, you still get used to it after a while. True, this time can last either one day or several weeks. In order not to torment yourself, at any time operating system It is possible to adjust the sensitivity of the mouse. This is exactly what I want to tell you about.

First of all, we need to get to the parameters section. To do this, go to the control panel by clicking on the “Start” button.

Then select the “Mouse” section.

A small window with settings will open in front of you. In the settings window, select the “Pointer Options” tab. At the top of the panel there is an item called "Move". Here you can also see a small slider with the inscription “Set the pointer speed.” Start moving the slider in one direction or another to change the parameter. If you move the slider to left side, then the speed of cursor movement decreases, and if to the right, then, accordingly, it increases. Don't forget to click OK when this process is complete.

Be sure to check the box next to "Enable" increased accuracy installation of the pointer." In this case, the cursor moves much more accurately.

Among other subsections, you may be interested in the “Mouse Buttons” tab. Here you can exchange the assignment of the right and left buttons. This function may be needed, for example, by those people who often use their left hand rather than their right hand.

Where more interesting point“Double-click speed.” What is this anyway? This parameter tells you how quickly you need to double-click on a folder (or icon) for it to open. This parameter is very important for people who have been using the computer recently - if the execution speed double click high, then the user often simply does not have time to make this double click and the folder simply does not open. The lower the click speed, the slower you can click on the right mouse button when opening folders or launching programs. You can test your click speed right in this window - click on the yellow folder. When the process is complete, click OK.

The Wheel tab will allow you to adjust the scrolling of rows with one turn. By default, one turn of the wheel scrolls three lines and this is quite enough, but it may not be enough for someone. This is also a kind of sensitivity of the mouse, which allows you to work with this device faster and more conveniently.

That's all, actually. In principle, the setup procedure is simple, but it may take some time, since it is very difficult to achieve ideal parameters the first time. All comes with experience.

P.S. By the way, there are now mice on the market that allow you to adjust the sensitivity using a pair of buttons located on the body of the device. As a rule, these are gaming mice and quite expensive ones.

P.P.S. The described process is suitable for any version of Windows, including Windows 7, Vista, XP, 8.

If you are using desktop computer or a laptop with Windows 10, then of course you use a touchpad or mouse - a4tech bloody, Logitech, razer, defender, SteelSeries and so on.

If you experience some inconvenience while working, then on Windows 10 you can easily customize mouse button control to suit your needs.

To properly configure the mouse buttons, first of all you need to set the optimal cursor sensitivity, movement speed, sharpness and, of course, “tighten” the wheel, the capabilities of which not everyone uses to the fullest.

Wherein Special attention need to be turned to inversion, right, left and, if there is side buttons, in particular the response.

The mouse click itself maximum convenience can be set to single or double click (click).

NOTE: for the most comfortable work It's best to use a wireless bluetooth/radio mouse with five (side) buttons.

Basic mouse button settings in Windows 10 on a computer or laptop

IMPORTANT: These settings are available for most devices, but the most advanced dedicated mice or touchpad may have many additional settings, which are displayed in a separate properties window.

To configure these settings, read the instruction manual for your device.

To configure basic mouse or touchpad settings, you must go to the application settings.

To do this, open the “Start menu” by clicking on the button in the lower left corner of the screen. Then click the "Options" button.

Now go to the "Devices" section

In this window, the first item indicates the button that will be the main one - by default it’s “left” and almost everyone uses it except for left-handed people.

The second item defines the mouse wheel. Tap to choose between scrolling multiple lines at a time or scrolling across one screen.

The easiest way to check these parameters is to open any site (or use the one you are currently on) and see what works best.

If you select the wheel to scroll multiple lines, the slider below will become active and you can set the number of lines to scroll.

Just click on it and drag left or right to decrease or increase the scroll size.

In the third point, you can enable scrolling of inactive windows when you hover the cursor over them.

The last option only applies to the touchpad. Click the drop-down menu to select the touchpad delay time.

The longer the delay, the longer you have to press the touchpad when you're done writing on the keyboard.

You can choose long, medium, short, or turn everything off completely. Default value: medium delay.

Advanced mouse button sensitivity settings in Windows 10

If you want to see other mouse settings, click on the line: " Extra options mice". After this, “Mouse Properties” will open.

If you check the box next to the line: “change button assignments,” the main one will change from left to right or vice versa.

The image on the right shows which mouse button is currently the primary one (in blue).

The last item on this tab is to enable and configure stickiness. You can activate it by checking the box next to the line: “Enable sticky”, after which the settings options will become available.

To access mouse cursor settings, click on the "Pointers" tab at the top of the properties window.

How to adjust mouse button sensitivity on Windows 10

To access other cursor settings, such as cursor sensitivity, click the “Pointer Options” tab at the top of the properties window.

In it, you can adjust the sensitivity and speed of cursor movement on the screen using the speed selection slider: move it left or right to decrease or increase the speed of the pointer movement.

There are several more settings on the same tab, but they are not so important that they need to be specifically described.

On the “Wheel” tab, you can specify how many lines the page of a website, book, or document should scroll.

The remaining options are intended for use by advanced users.

In the Windows 10 operating system, as in previous versions Windows, you can customize every little detail of your mouse.

As you can see, windows 10 settings are simplified and accessible, where you can configure basic settings and access the settings window detailed properties mouse, with big amount options and an interface familiar to users more earlier versions Windows. Good luck.

On computers running in the operating room Windows system, the main control device is the mouse. The principle of its operation is based on registering movements and transmitting them to the operating system to synchronously move the pointer on the screen.

At the base of optical-mechanical mice there is a rolling unit based on a ball, the rotation of which is transmitted measuring system. The measured value and direction of the device's displacement is transmitted to the computer.

Optical mice, unlike optical-mechanical mice, do not roll over the surface, but glide over it, uniformly illuminating it with a beam of rays. The reflected rays are recorded by a sensitive element. The mouse seems to “see” the micro-irregularities of the surface and registers its displacement relative to them.

The mouse family also includes other devices, such as trackballs and touchpads. The trackball is stationary, and its motion sensor - the ball - is rotated by your fingers.

Trackballs, like mice, are optical-mechanical and optical.

A touchpad is a touchpad. To move the pointer, you just need to drag your finger across it. Typically touchpads are used in laptop computers- laptops.

Buttons are used to issue commands using the mouse. A standard mouse has only two buttons: the main one (usually the left one) and the special one (usually the right one). If the mouse has other controls - buttons, wheels, etc. - they should be considered additional and optional.

To configure the mouse and its analogues, use the Properties: Mouse dialog box. To open it, double-click the Mouse icon in the Control Panel window ( Start Panel management).

The most important mouse settings are adjusting its sensitivity and setting the double-click of the main button. Selection optimal settings depends on the features of the specific model, as well as on usual style work.

The sensitivity of the mouse determines the amount of displacement of the screen pointer per unit movement of the mouse. Check if you can move the pointer across the entire screen diagonally without lifting your wrist from the surface of the table, that is, moving only your fingers. If this exercise fails, it means that the sensitivity of the mouse leaves much to be desired and needs to be increased. Reverse operation- reduction of sensitivity - may be required when people who are not fully accustomed to the system’s reaction to their actions, for example small children, work with the computer.

Adjusting mouse sensitivity

Open the Mouse Properties dialog box: Start - Control Panel Mouse.
Click the Index Options tab.
Mouse sensitivity is set using the slider. Set the speed of the pointer in the Move panel. The further to the right the slider is, the more sensitive the mouse, the further the pointer moves with a single movement of the device.
Here it is recommended to check the Enable increased pointer accuracy checkbox. With this setting, the pointer first moves slowly and then accelerates. This increases accuracy over short distances, which is important in application programs, for example, in graphic editors. In active computer games, where the mouse is used to aim a weapon at a target, this setting may have a negative effect by reducing the player's reaction speed.

A double click is recognized by the time interval that elapses between two consecutive clicks of the main mouse button. If it is too small, two clicks are perceived and processed by the operating system as one normal click. If the interval is too large, the system perceives two different clicks. The time interval at which the system registers a double click has a certain tolerance and can be configured.

Setting up a double click

Open the Mouse Properties dialog box: Start - Control Panel - Mouse.
Double-click options are configured in the Double-click speed panel. The folder icon next to it is the scan area. If two consecutive clicks are perceived as a double click, then the state of the folder changes - it opens or closes.
The double-click interval is adjusted using the Speed slider.

U modern models In addition to buttons, mice have a wheel. It is used to scroll documents. If you are using such a mouse, a Wheel tab appears in the Mouse Properties dialog box. It will come in handy if the computer is often used for working with texts. By setting the scroll switch to the specified number of lines, you can set the number of document lines that correspond to turning the wheel one click. Alternative option- switch Scroll one screen at a time. In this case, turning the mouse wheel is equivalent to pressing the PAGE UP or PAGE DOWN key,

IN Lately You can see more and more special models of manipulators. They are distinguished by an increased number of buttons, two wheels, or other unusual controls. Customization of these tools is provided by specialized drivers.

The responsiveness of a mouse in Windows often has a huge impact on the comfort of using a computer, comfort when surfing the web and navigating web pages, the speed of scrolling the wheel in dynamic games and when reading from the screen. It would not be amiss to say that in the “top ten” all these parameters can be flexibly configured, adapting and adapting the settings in accordance with your own personal preferences and needs. How to do this will be discussed in today’s material.

Mouse sensitivity– a rather subjective thing. Everyone has their own preferences for how quickly they can scroll their wheel, how quickly they can move their cursor, and how quickly they can press buttons twice. To adapt all this “for yourself,” the system has some mechanisms and tools.

How to change scroll speed when reading text?

When reading web pages or Word documents, you often have to scroll the text forward or backward using the scroll wheel. To customize the text scrolling speed, you can use a special slider available in the system settings.

Go to Windows settings using the Start menu.

As you can see, there is a slider that is responsible for the number of lines that will be scrolled in one go when the mouse wheel is scrolled once.

We set this slider to the desired position, simultaneously testing the set values on one of the documents in the browser or in a text editor. We stop and close the window when the position installed indicator will satisfy you. Go ahead.

How to adjust the speed of double-clicking the left mouse button?

When opening folders and launching programs, we often double-click. But sometimes it may not work. What could be the reason? If the mouse is not clogged and works properly, the answer to this question is the incorrectly set value of the double-click speed of the accessory. Let's configure this parameter. We go to the control panel by right-clicking on the start button in the lower left corner and select the appropriate item in the list that appears.

Interface this section may differ slightly from what is available on your computer, but I can assure you that all options are reduction And increase Mouse sensitivities are concentrated here, and all you have to do is dig into the presented section of the control panel.

So, go to the first tab “Buttons”, and set the parameter corresponding to the speed of double pressing the main key of the controller.

We increase or reduce this indicator, accurately selecting the desired value on the scale and confirming it by pressing the “Apply” and “OK” keys.

How to adjust the speed of cursor movement on the screen?

Go to the tab for configuring cursor parameters. The first section on this tab is responsible for the speed of movement of the mouse pointer.

By dragging the corresponding slider left or right, you can change mouse movement speed exactly to the level you need.

How to change the appearance of the pointer?

if you love unusual design and bright colors, you can change the appearance of the cursor to the one you like best. To do this, on the form responsible for setting up and configuring the mouse, go to the “Pointers” tab, and in the main mode field, by pressing the “Browse” key, you can select any indicator you like, saved in graphic file on the computer's hard drive.

Also within your power tune cursor diagram by selecting the topic you need from the list at the top (fortunately, they are installed in a set and applied automatically so that you don’t need to change or reinstall anything after that).

In this material I tried to outline all the ways mouse sensitivity settings. In addition, I touched on the topic of change appearance pointer, which I hope you will also like. Use your computer for your own pleasure - read books, study applications, play games. In a word, do whatever your heart desires. The main thing is that it brings benefit and moral satisfaction to you, your loved ones and friends, and may everything work out for you!

A computer device called a mouse is included in almost any computer system and is very convenient means user interaction with graphical interface. Even laptop owners, not to mention avid gamers, prefer to use a mouse rather than a touchpad. And here the question arises of how to adjust mouse sensitivity in a computer environment. This is necessary to make your work as comfortable as possible.

How to adjust mouse sensitivity on Windows 7?

On XP, 7 or 8 systems, all actions are performed in an almost identical way, only the names of the sections in which you can access these settings differ. In any case, it all comes down to using the standard “Control Panel” initially. It can be accessed from the main Start menu.

In the panel, in relation to the seventh version of Windows, you need to select the category of devices and printers through the hardware and sound section, where the mouse settings item will be located.

How to adjust mouse sensitivity? You should use the pointer options tab first, as this is where the most basic settings are presented. At the top of the window there is a special slider, moving which left and right adjusts the speed of the pointer moving across the screen. After several experiments, you can determine the optimal parameter for yourself.

By default, the enhanced pointer precision option is enabled. It is better not to touch this line. As for the options for moving the cursor while leaving a trace, this is optional. But many admit that this effect causes discomfort, and sometimes simply distracts from work. You can enable cursor hiding when entering text from the keyboard. Again, it’s just as you like.

How to adjust mouse sensitivity on Windows 10?

Now a few words about setting up the manipulator in Windows 10. If anyone doesn’t know, in the tenth version of the system there is not one, but two “Control Panels” (one is standard, the second is the settings section). Based on this, you can use two options for setting up the mouse (although, according to by and large, you can only use the options menu).

So, how do you adjust mouse sensitivity through the options section? Call it from the main Start menu and go to the devices tab (second from the left). In the new window on the left side there is a line of mouse and touchpad settings.

The setup menu is different from the standard one. These are mainly the scrolling options and setting the main button. To access other options, you must use Advanced Settings. This is where the catch lies. When you click on this link or when you call the standard “Control Panel” (for example, control command in the “Run” console) and selecting the appropriate parameters opens the same settings window, which many are accustomed to seeing in earlier systems.

Actually, all the standard settings are presented here, including the speed of cursor movement, scrolling with the wheel, and changing buttons or the pointer. All this is customizable at your discretion.

Configuring mouse settings in games

Finally, there is another problem of how to adjust the mouse sensitivity for playing computer games. Let us immediately note that in the majority modern games There is such an option (and with fairly fine settings).

Every gamer, for example, who prefers first-person shooters (FPS), knows that a second of delay can sometimes cost the life of his character. Therefore, you need to configure the mouse in such a way that the movements are as accurate as possible.

Conclusion

As you can see, the manipulator setup looks quite standard, except special parameters in Windows 10. In addition, some specific devices were not considered here, the icon of which is constantly displayed in the system tray, from where you can access all parameters and options. But, as a rule, the settings windows are made in the image and likeness of Windows systems, so it is quite difficult to get confused in them, although in some cases you can find very unusual settings.

Every owner of a modern computer has a device like a mouse. Mouse - a device for interconnecting the user and the cursor on the desktop and returning various teams PC. Like the rest of the periphery, it has changed over the years. First with a wheel at the bottom, then optical and laser. Modern market will satisfy every buyer. There are different ones: office, gaming, with or without wire. Different shapes, weights, colors and so on.

What is mouse sensitivity

For comfortable operation, you need to customize the device for yourself, namely, change the mouse sensitivity parameter. Sensitivity (resolution) is an indicator responsible for mouse sensitivity, expressed in units called DPI (dots per inch) - the number of dots per linear inch that the manipulator device detects.

Depending on the environment, this indicator needs to be changed. For shooters - sensitivity should be high for sudden movements and spreads, for Photoshop - medium so that the mouse moves smoothly. Many gaming devices have special buttons to switch this indicator instantly.

How to change mouse sensitivity in Windows XP

To adjust mouse sensitivity, you need to do a number of steps below:

How to change mouse sensitivity in Windows 7

Open "Control Panel". To do this, click on “Start” and select “Control Panel”.
If you have the mode for displaying settings by category, you need to select “Hardware and Sound”, then “Mouse”. If the control panel is in icon display mode, then simply select the shortcut labeled “Mouse”.
In the window, select the “Pointer Options” tab.
Moving the slider will change the DPI amount of your device. Find your appropriate indicator. If necessary, check the “Enable increased pointer accuracy” checkbox.
Click “Apply” to save the settings, then “OK” to close the window.

More sensitivity Windows devices 7 can be changed using command line. To do this you need to do the following:

How to change mouse sensitivity in windows 8

Change sensitivity mouse in windows 8 is just as easy as 7. You need to follow these steps:

Open the Start menu and enter “Mouse” in the search field;
Go to the “Mouse” icon in the “Pointer Properties” tab;
We change the slider called “Pointer speed” to increase - to the right, decrease - to the left, depending on your requirements;
Click “Apply”, then “OK”.

How to change pointer speed in Windows 10

Let's go to Windows settings using the Start menu;
Open the “Devices” section and find the “Touchpad” tab;
Go to the section for configuring cursor parameters;
Change the state of the slider in the “Move” section;
After all the settings, click “Apply”, then “OK”.

How to change mouse sensitivity in Windows 10

An alternative way to adjust sensitivity is using the mouse driver. A program that contains numerous settings for precise and detailed mouse configuration. Basically, these programs come with gaming devices. We will look at configuration through the program using the example of SteelSeries Engine and gaming mouse Steel Series Kana.

At startup we see many divisions, one of which is connected devices. The rest is profiles, as well as setting each key separately and a block with a description of each action. The main thing for us is setting up your profile.

When creating a new profile, we can configure the DPI indicators for mode 1 and 2. They are switched between each other using auxiliary key on the device. We set DPI to 400 for one mode - optimal for playing shooters. For mode number two - 800. A pleasant indicator for surfing the Internet.

And also the third point we see is the sampling frequency of the USB port. Specified in Hertz. It needs to be set to the maximum value, in our case it is 1 thousand Hz. This port polling rate system, at 1 thousand Hz the delay is 1 ms. For example, on regular office mice maximum frequency will be 125 or 250 Hz, which means a delay of 4 and 8 ms, respectively.

After setting these three points save your profile and use it, switching sensitivity using our settings.

12.10.2009 20:51

Majority Windows users know how to change the appearance of the mouse pointer. But almost no one adjusts mouse settings like double-click speed or mouse pointer speed. And in vain. After all, a properly configured mouse significantly improves the convenience of working on a computer.

To start customizing your mouse, open Control Panel -> All Control Panel Items -> Mouse.

Mouse Buttons Tab

Change button assignments. If you enable this function, then left button the mouse will perform the functions of the right one, and the right button will perform the functions of the left one.

Double click speed. Move the slider and adjust the double-click speed by clicking on the folder image next to the slider.

Mouse Button Stuck. If you enable this feature, you can drag and drop files and folders without holding down the button. It is enough to hold down the mouse button for a few seconds and the selected object will “stick” to the mouse pointer. To “release” an object, you need to click. The same thing applies to window scaling. The time required for sticking to activate can be adjusted by pressing the button Options and moving the slider.

Index Options tab

Moving. Using the slider, you can speed up or slow down the movement of the mouse pointer across the screen. The higher the screen resolution, the slower the mouse pointer moves, which leads to unnecessary strain and increased fatigue in the wrist muscles. Adjust the pointer movement speed so that the mouse pointer can easily move across the entire diagonal of the screen with one hand movement along the entire diagonal of the mouse pad. If you have installed maximum speed movement, but the mouse pointer moves slower than desired, then uncheck Enable increased pointer accuracy, this will speed up the mouse even more. Very useful feature in our era large monitors And high resolutions screen. It’s strange that almost no one configures this parameter!

Home position in dialog box. Each dialog box has several buttons, one of which is selected as the default (the button that the user is most likely to use). The default button is highlighted blue in Windows 7. If you want that when opening dialog boxes If the mouse pointer has always been automatically positioned on the button by default, then activate this option. Convenient feature, if you get used to it.

Visibility. Here you can adjust the visibility of the mouse pointer:

Show mouse trail;
Hide the pointer while typing;
Indicate the location of the pointer when the Ctrl button is pressed.

Experiment with these options and enable the ones you need.

Wheel tab

Here you can adjust the speed of the horizontal and vertical scroll text documents, web pages and other windows using the wheel.

Vertical scrolling. You can set the number of lines to rewind when you turn the wheel one click. If you set the value to one screen, then turning the wheel one click is equivalent to pressing the Page Up or Page Down button on the keyboard.

Horizontal scrolling. This option is designed for mice that support the horizontal scroll by tilting the wheel. You can set the horizontal scrolling speed by specifying the number of characters to rewind.

Indexes tab

This tab is probably familiar to most users. Windows is better all other tabs. After all, here you can change, add and delete display schemes (type) of the pointer.

To choose one of system diagrams, use the drop-down list Scheme. An open diagram can be modified using the area Settings. Highlight the mode and use the button Review change the pointer view in this mode.

To remove an installed scheme, select it from the drop-down list and click the button Delete. System (pre-installed) schemes cannot be deleted.

Some topics Windows design 7 changes the appearance of the mouse pointer. To prevent themes from doing this, uncheck Allow themes to change mouse pointers.

To disable the shadow cast by the mouse pointer, clear the checkbox Enable mouse pointer shadow.

Hardware tab

This displays information about the status of the device and mouse driver. Pressing the button Properties, you can update, remove or roll back the driver and see Additional information about the mouse, as if you had opened the mouse properties in Device Manager.

Additional Mouse Features

Fast scrolling of long documents

To enable fast scrolling of a web page or text document V Word editor, click on the wheel and move the mouse up, down, or sideways.

Special abilities

To set up mouse accessibility, open Control Panel -> Center special features and press Making the mouse easier to use(changing the settings of a mouse or other pointing device).

Windows, the main control device is the mouse. The principle of its operation is based on registering movements and transmitting them to the operating system to synchronously move the pointer on the screen.

At the base of optical-mechanical mice there is a rolling unit based on a ball, the rotation of which is transmitted to the measuring system. The measured value and direction of the device's displacement is transmitted to the computer.

The mouse family also includes other devices, such as trackballs and touchpads. The trackball is stationary, and its motion sensor - the ball - is rotated by your fingers.

Trackballs, like mice, are optical-mechanical and optical.

The touchpad is Touchpad. To move the pointer, you just need to drag your finger across it. Typically, touchpads are used in portable computers - laptops.

To configure the mouse and its analogues, use the Properties: Mouse dialog box. To open it, double-click the Mouse icon in the Control Panel window (Start - Control Panel).

The most important mouse settings are adjusting its sensitivity and setting the double-click of the main button. The selection of optimal settings depends on the features specific model, as well as from the usual working style.

The sensitivity of the mouse determines the amount of displacement of the screen pointer per unit movement of the mouse. Check if you can move the pointer across the entire screen diagonally without lifting your wrist from the surface of the table, that is, moving only your fingers. If this exercise fails, it means that the sensitivity of the mouse leaves much to be desired and needs to be increased. The reverse operation - reducing sensitivity - may be required when people who are not fully accustomed to the system's reaction to their actions, for example small children, work with the computer.

Adjusting mouse sensitivity

Open the Mouse Properties dialog box: Start - Control Panel Mouse.
Click the Index Options tab.
Mouse sensitivity is set using the slider. Set the speed of the pointer in the Move panel. The further to the right the engine is, the more sensitive mouse, the further the pointer moves with a unit displacement of the device.
Here it is recommended to check the Enable increased pointer accuracy checkbox. With this setting, the pointer first moves slowly and then accelerates. This increases accuracy over short distances, which is important in application programs, such as graphic editors. In action computer games where the mouse is used to aim a weapon at a target, this setting may have a negative effect by reducing the player's reaction speed.

Setting up a double click

Open the Mouse Properties dialog box: Start - Control Panel - Mouse.
Double-click options are configured in the Double-click speed panel. The folder icon next to it is the scan area. If two consecutive clicks are perceived as a double click, then the state of the folder changes - it opens or closes.
The double-click interval is adjusted using the Speed slider.

Modern mouse models have a wheel in addition to buttons. It is used to scroll documents. If you are using such a mouse, a Wheel tab appears in the Mouse Properties dialog box. It will come in handy if the computer is often used for working with texts. By setting the scroll switch to the specified number of lines, you can set the number of document lines that correspond to turning the wheel one click. An alternative option is the Scroll one screen at a time toggle. In this case, turning the mouse wheel is equivalent to pressing the PAGE UP or PAGE DOWN key,

Recently, you can see more and more special models of manipulators. They are distinguished by an increased number of buttons, two wheels, or other unusual controls. Customization of these tools is provided by specialized drivers.

How to change mouse settings. In modern computers, for many users, the main role in control is played by the computer mouse. It's rare that anyone can work without it. , I already told you about it too. It's time to talk about setting them up. We are not always satisfied with how the mouse works, but some people don’t even suspect that it can be customized. Now we’ll talk about how to change mouse settings.

In order to get to the mouse settings in Windows 7, you need to go to the menu – Start – Control Panel . In the window Control panels in a small window Search at the top right write the word “ mouse" And a list of all your mouse settings will open on the left.

Setting up a computer mouse in Windows 7

In Windows XP you also need to call up the menu – Start - Control Panel . And in the window Control panels find the icon Mouse. Open this folder by double clicking and let's go to settings.

Setting up a computer mouse in Windows XP

Note

I will describe the mouse settings at Windows example XP, especially since they are not at all different from the same settings in Windows 7.

The most important mouse setting is its sensitivity and setting up double-clicking the main button. The optimal settings will vary depending on your model and how you work.

Mouse sensitivity is the response of the pointer to its displacement. See if you can move the pointer diagonally across the entire screen without lifting your wrist from the surface of the table, that is, moving only your fingers. If you can't do this, then you need to adjust the mouse sensitivity.

Adjusting mouse sensitivity

Open the window Properties: Mouse (Start - Control Panel - Mouse) .
Go to the tab Pointer Options .
Move the slider on the panel Moving in the required direction. When moving the slider to the right, the mouse will become even more sensitive, and to the left - less.
Check the box to record Enable increased pointer accuracy . Now your pointer will first move slowly and then speed up. This will be useful to you when working in graphic editors. In games, especially where you have to aim the weapon at the target, checking this box will only hinder you and slow down the player’s reaction.
Very interesting panel Visibility. You can try setting the checkboxes to different functions, but these bells and whistles interfere with work. But it depends on who.

A very interesting Visibility panel in the mouse settings window.

Setting up a double click

In the same window, go to the tab Mouse buttons .
On the panel Double click speed Double-click on the yellow folder with the left mouse button. If your two clicks opened this folder, then everything is fine. If not, then adjust the double click by moving the slider Speed .

In the Double Click Speed panel, left-click the yellow folder twice.

If you are left-handed, you can change the assignment of the mouse buttons on the panel Button Configuration . Just check the box next to the entry Change button assignments . Don't forget to save your settings with the button Apply And OK .
I don’t recommend installing sticky, otherwise any mouse click you make, especially when working with text editors, will cling and drag any object along with it.

How to change the mouse pointer

Go to the tab Signposts .
Open the dropdown list (click on the small black triangle on the right) in the panel Scheme .
Select a scheme.
Below in the settings also select the pointer type and click the button Apply .
If all these schemes are tired of you or do not suit you, then click the button Default .
Clicking the button Review, you can download many more cursors from system folder Cursors. You can download your cursors to the same folder (C:\WINDOWS\Cursors) and select them from there.

Open the drop-down list (click on the small black triangle on the right) in the Outline panel. Select a scheme.

On the tab Wheel there is no need to change anything. You can just experiment.

There is no need to change anything on the Wheel tab. You can just experiment.

On the tab Equipment You can see how your system detects your mouse.

This is how you can customize your computer mouse.

Write in the comments what incidents you had with the mouse and how you fixed it. Maybe this will be useful to someone.

Modern computer It is impossible to imagine without such a device as a mouse. Since its invention it has become an indispensable device computer control. They are different forms, with two and more buttons, ball driven and optical laser. But each of them needs to adjust the speed of cursor movement, depending on the user's requirement. Therefore, in this article we will look at instructions for setting mouse sensitivity in Windows 7, 8 and popular game Counter-Strike.

Adjusting mouse sensitivity in Windows 7 and Windows 8

Windows 7

To change the mouse sensitivity in the operating system ( detailed description for Windows 8, see just below), you need to make a couple of simple changes.

To reduce sensitivity, you need to drag the pointer to the left (1-2 divisions are enough to get a noticeable reduction in speed). Conversely, to increase speed, drag the control to the right. From our experience, the most comfortable work with settings slightly above the middle (but if you find it more convenient to work at a higher speed, you can set it higher).

Windows 8

The setup process in Windows 8 is similar. Go to the control panel, find the “mouse” item and click on it.

In the window that opens, go to the pointer parameters tab and set the desired level of cursor movement speed.

Changing mouse sensitivity using driver snap-ins

A4tech drivers

In order to change the sensitivity of the A4tec mouse using a snap-in, launch “properties” by right-clicking on the operating system tray icon.

In the settings window that opens, go to the “Movement” tab and in the “Cursor movement speed” section, drag the slider to determine the maximum comfortable sensitivity. To save, click “Ok”.

Logitech drivers

Changing the Logitech mouse sensitivity settings is done in the driver menu, on the “Mouse Moving” tab. In order to change the settings, select its model in the “Select a mouse” field and in the “Pointer movement speed” item, change the sensitivity as you wish.

Setting the mouse speed in games

Mouse sensitivity online games- one of the most important parameters for avid gamers, because a second of delay can result in the death of his character for the player. There are separate menus for setting mouse sensitivity in games; let’s look at one of these games - Counter Strike. To do this, go to the game settings by selecting the “Options” menu item.

IN this menu go to the "Mouse" tab and in the "Mouse sensitivity" section select required parameter, which will allow you to control your character with maximum convenience. Changing mouse parameters exists in almost every game, and you can find them in the settings.

This lesson will show you how you can change mouse sensitivity inWindows 7-Vista-XP. If you don’t know what it is yet, you can read about it in our dictionary at the link below:

And so, now you should know exactly what mouse resolution is, and we can continue.

To start setting up, you need to open the mouse settings window, this can be done in several ways, I will give two of them for Windows 7 (Vista) and one for Windows XP.

Open the Start menu and select "Control Panel/Hardware and Sound/Mouse" See screenshots below:

Or, open the Start menu, type “mouse” in the search box and press Enter, or select it from the search results.

For those who have Windows XP, open the Start menu and select “Control Panel/Mouse”.

Let’s continue, a window with mouse settings has opened, go to the “Pointer Options” tab. This tab has a “Move” field, where you can adjust the mouse sensitivity.

Move the slider left and right, then check if the sensitivity has changed in better side(according to your needs). It is better to leave the checkbox for “Enable increased pointer precision”; this function increases the accuracy of the mouse pointer. When you select the most appropriate value, click OK to save your changes.

There are endless steps to adjust mouse sensitivity, so don't be afraid to save specific value sensitivity and try to work with it a little. And if you don’t like it, then you can always go to the mouse settings and change the pointer sensitivity to a new one or to the one with which you are already used to working. The main thing is not to be afraid to experiment.

Most users who have used computer devices No touch screens, use either a touchpad or a mouse to control the system interface. When working with a mouse, the response of the manipulator to user actions is one of the most important indicators providing comfort at work. Many people don’t like the standard default settings, so sometimes the question arises of how to increase mouse sensitivity (on Windows 8, for example, or on another system). This is done quite simply, but access to settings is somewhat different in different versions of the OS.

How to increase mouse sensitivity: main directions of action

In understanding the issue of adjusting the response of the manipulator, several important aspects should be taken into account. Firstly, great importance a modification of the mouse itself plays (standard and gaming controllers with additional buttons).

Secondly, when it comes to how to increase the sensitivity of the mouse, you need to clearly understand which parameters will have to be changed. IN standard settings The following options are offered:

scroll;
double click speed;
the speed of moving the cursor around the screen.

There are also a number of additional settings that you can set at your discretion (cursor type, button reassignment, etc.), but by and large they have nothing to do with optimizing the response.

Accessing settings in different versions of Windows

The settings section of the manipulator itself simple version in all systems can be accessed through the “Control Panel”.

But in the seventh version of the system you need to use the equipment and sound section (devices and printers), and in the eighth and tenth the settings are made as a separate item.

In addition, if you are solving the problem of how to increase mouse sensitivity on Windows 10, to access the corresponding section, you can use the options menu, in which you select the device item, and then select the mouse and touchpad. To access the window of other parameters, use the additional settings item (the same window will appear as in Windows 7).

How to increase mouse sensitivity on Windows 7 and 10: adjusting scroll speed

IN standard window settings to increase scrolling lines (pages), use the “Wheel” tab.

Here you can increase the number of lines by setting the value yourself (default is 3), or set scrolling to one screen.

Windows 10 in this regard compares favorably with the seventh modification. When entering the mouse and touchpad section, the user immediately sees the scrolling settings bar. The number of lines increases by moving the fader (slider) to the right. In addition, there is an option to enable scrolling of inactive windows on hover.

Double click control

Now let's see how to increase the sensitivity of the mouse in terms of faster response when double-clicking the main button.

This is done on the “Buttons” tab, where by moving the slider in the corresponding line to the right, the desired mode is set. Additionally, you can use the sticky function to select objects by hovering the cursor without clicking, but as practice shows, most modern users do not use this function.

Changing cursor speed

Finally, in the question of how to increase mouse sensitivity, special attention should be paid to the parameters of cursor movement on the screen.

To set the desired value on the pointer parameters tab, use a line that also has a slider. Moving to the right increases speed. However, you can set the parameters too high only if the person has acute vision. In addition, this is exactly the speed that can be used on monitors with large screen diagonals (this is justified here). But on screens with diagonals of 14-15 inches, it is possible that the cursor will “jump” from one edge to the other.

A few final words

Despite the above methods for setting the basic characteristics of a computer pointing device, we can say that the question of how to increase the sensitivity of a mouse is purely conditional, since each user has his own preferences. In addition, the setting may depend on many additional factors (mouse type, screen size, etc.). By the way, for game controllers supplied with drivers special utilities, allowing to produce not only standard actions setup, but also many additional operations. Therefore, it is better to use such accompanying utilities for calibration.

If you use a desktop computer or laptop with Windows 10, then of course you use a touchpad or mouse - a4tech bloody, Logitech, razer, defender, SteelSeries and so on.

If you experience some inconvenience while working, then on Windows 10 you can easily customize mouse button control to suit your needs.

In this case, special attention should be paid to inversion, right, left and, if there are side buttons, in particular to the response.

For maximum convenience, the mouse click itself can be configured as a single or double click (click).

NOTE: For the most convenient experience, it is best to use a wireless bluetooth/radio mouse with five (side) buttons.

Basic mouse button settings in Windows 10 on a computer or laptop

IMPORTANT: These settings are available for most devices, but the most advanced dedicated mice or touchpad may have many additional settings that appear in a separate properties window.

To configure these settings, read the instruction manual for your device.

To configure basic mouse or touchpad settings, you must go to the application settings.

To do this, open the “Start menu” by clicking on the button in the lower left corner of the screen. Then click the "Options" button.

Now go to the "Devices" section