What to do if the disk is not cleaned. New cleaning menu. Third-party resources for cleaning system and other disks

Computers - devices of fine technical and program organization. One of the conditions for their functioning at 100% of their existing potential is, naturally, cleanliness and order both inside and outside. system unit, and directly in hard disk partitions. If you do not systematically clean your PC, freeing your PC from dust, dirt and “ digital trash", sooner or later trouble will happen to him. It will begin to “slow down” and “glitch” or fail altogether - it will stop starting.

This article will help you clean up the C drive from unnecessary files manually and through special programs.

How to remove unnecessary files manually?

Empty the trash!

Everything is earlier in Windows deleted folders and the files are stored in a special directory called “Trash”. It performs the same functions as trash bin in a house or apartment - all the rubbish is thrown into it. You can restore data that you deleted from this software reservoir at any time.

However, if the “Trash” only stores everything unnecessary, it must be emptied. Because recycled “digital trash” continues to occupy system partition space. Why waste it? Still, it’s better to spend free megabytes (or even gigabytes!) on useful program or a game. Agree.

To empty the Trash, do the following:

1. Right-click on the “Recycle Bins” shortcut on your desktop.

2. From the contextual set of options, select “Empty Trash.”

"Cleaning" in Windows directories

During operation operating system in her folders accumulate so-called temporary files. After one-time using Windows or some other program turns them into “ballast”.

To get rid of them:
1. Press the key combination - “Win” and “E”.

2. Right-click on the “Disk C” icon.

3. In the system menu, click “Properties”.

4. In the new window, on the General tab, click Disk Cleanup.

5. Wait a moment. System utility Before deleting files from the disk, you need to analyze the directories.

6. Check the boxes next to the items that need to be deleted (“Magazine”, “Sketches”, etc.).

7. Click the “Clear...” button.

Upon completion of the procedure, you can also remove the saved OS restore points and thereby further increase the free space of the system partition. This is done like this:

1. In the same window, go to the “Advanced” tab.

2. In the “System Restore…” block, click “Clean”.

3. Confirm deleting backup points: in the request message, click “Delete”.

Attention! After running the command Windows utility deletes all existing restore points except the last one.

What's going on in the Temp folder?

The Temp folder also serves as storage for temporary files. Many programs and the operating system itself during execution place their elements in it. various operations(unpacking archives, updates, installations, etc.).

You definitely need to visit Temp regularly and clean out all its contents. It can store not only temporary files, but also viruses. Great amount digital “strains” after a successful attack on a PC are located here.

To clear Temp:
1. Open the folder. It is located in the directory:

Drive C → Users → → AppData → Local

2. Press the combination “Ctrl+A” to select all files and folders.

3. Click the right mouse button. Select "Delete".

Have you been on the Internet? Clean up your browser!

After visiting sites, enough information is stored in the cache (special storage) and browser log. a large number of information, including confidential information. Naturally, it also reduces the precious free megabytes of the C drive.

Therefore, make it a rule that after completing web surfing (working on the Internet) mandatory clear browser. This procedure will not take much of your time - only 1-2 minutes, no more!

1. In almost all popular browsers (Opera, Google Chrome, Firefox) cleaning is launched by the hot key combination - “Ctrl + Shift + Del”. Click them simultaneously while in a web browser window.

2. In the settings of the panel that opens, specify that you need to delete the data that was saved for the entire period of using the browser. Also check the boxes next to the objects that need cleaning.

3. Click the "Clear history" button.

Get rid of unnecessary applications

Some users, especially beginners, experience “Plyushkin’s disease” during the process of selecting and installing programs and games.

Whatever they come across on torrent trackers, websites dedicated to software, and other Internet sources, as well as on disks and flash drives borrowed from friends and acquaintances, they are sure to install on their PC. And at the same time they are guided by the same thought as the well-known literary hero: “I’ll take it, keep it, it’ll come in handy someday.” As a result of this approach, computer clutter occurs almost exponentially.

To neutralize from Windows unnecessary game, utility, follow this guide:

1. Click Start (the first icon on the left at the bottom of the display).

2. In the pop-up panel, click “Control Panel”.

3. In the “Programs” section, click “Uninstall...”.

4. Left-click once in the list on the program you want to get rid of.

5. Click at the top (above the list) the “Delete” option.

6. Follow the prompts of the uninstaller that opens to neutralize the software from the computer disk.

Advice! You can also open the uninstaller in another way: Start → All Programs → folder of the application to be removed → Uninstall file, or Uninstaller (or in Russian - Delete, Uninstall).

How to remove applications installed with the system?

Browser Internet Explorer, Notepad application, games (Klondike, Solitaire, etc.) and others integrated into Windows applications uninstall in the manner described above, and also through special utilities it is forbidden. They can only be disabled - make sure that they are not displayed in the operating system.

1. Open: Start → Control Panel → Programs → Programs and Features.

2. In the window that opens, in the list on the left, click the last item - “Turn on and off components...”.

3. Uncheck the box next to the component that you want to remove (for example, Games → Mahjong).

4. Click OK. Wait until the operation completes.

Automatic removal of unnecessary files

Cleaner programs

This category of software is designed to help you clean up your system partition in a matter of minutes. Through special algorithms These utilities delicately remove all existing “software obscenities” from the registry, OS directories, browsers and other applications.

Let's look at the most effective solutions.

Accurately detects and neutralizes temporary, unnecessary folders and files (Temp folder, thumbnail cache, memory dumps, system log). Correctly cleans browser directories (cache, cookies, browsing history, saved passwords and logins) and others trusted applications(WinRAR, Nero, Google panel and etc.). Brings order to the registry: checks its integrity, eliminates errors in “branches”.

One of the most powerful utilities to optimize the OS and clean up drive C. Cleans efficiently system folders and fixes problems in the registry. Provides the user with the ability to comfortably manage startup, scheduled tasks and uninstall useless applications. It has special settings For selective cleaning.

The most convenient tool for global and selective cleaning of the system disk. Uses more than 90 removal algorithms unnecessary objects. Highly optimizes the registry, startup, General settings OS. Able to perform detailed monitoring of consumed system resources in real time. Very easy to operate.

To use nCleaner:
1. In the utility window, click the “Clean System” section.

2. To clean the directories on drive C, in the “Clean system...” block, click the “Clean Now” button.

To fix errors in the registry, click the same button, but in the “Registry clean...” block.

3. Upon completion of the analysis of the selected objects, click “Remove”.

What to do with unnecessary drivers?

Of course, delete it. If a device is no longer on the PC, for example, a video card, hard drive, webcam, then, accordingly, its driver is not needed.

To solve this problem, it is best to use specialized utilities. For example, Driver Sweeper. This tiny program is indispensable when you need to find out which drivers are installed in the OS and remove unnecessary ones. It has additional useful features(registry cleaning, backup and etc.). Equipped with a multilingual interface.

Uninstaller programs

These maintenance utilities uninstall programs and games in a semi-automatic mode. They find and run the uninstaller for the specified application, and then, upon completion standard removal, release system partition from the remaining elements of the deleted application.

Let's look at the most popular uninstaller utilities on the Internet.

A worthy alternative to the system applet responsible for uninstalling software. Endowed with advanced functions, carefully analyzes directories. Finds all program remnants in folders and the registry. Equipped with an easy to use control panel.

It analyzes the disk and cleans it from “digital garbage” at lightning speed. Neutralizes objects from folders and the registry without interfering with the performance of the system and programs.

Solution from Chinese developers. Endowed with powerful algorithms for scanning system objects. Has the Force Scan function.

How to delete undeletable files?

If you have not yet encountered a situation where an unnecessary file “does not want” to be deleted, you will definitely encounter it in the future. This occurs because the object being deleted is being used by an application or driver.

Such problems are also resolved with the help of special utilities. Here are some of them:

Has a tiny size. Integrates into context menu OS. Tells the user which specific process is blocking the application. Correctly removes files in directories. Operates with just a few mouse clicks.

Can remove a large number of file locks related to user rights, access and security. Instantly terminates all blocking processes and safely sends the selected item to the trash.

It is protected from inappropriate use: it does not delete files without which the system cannot work and in which confidential user data is stored. Effectively removes locks and deletes files of almost all categories.

Beware, memory eaters!

Windows, by default, reserves system partition memory for its special files. They can have a fairly substantial volume - 4.7, 10 GB or more. But if there is no need for these files, or rather for the functions that they support, of course, it makes sense to remove them. Who wouldn't mind another 5-10 free gigabytes on drive C?

Pagefile.sys

The swap file is a kind of software reservoir for PC RAM. It temporarily stores data that it cannot accommodate. RAM. But if you powerful computer with RAM of about 6-8 GB, then this file can be removed by disabling the special option.

1. Go to: Panel → Control Panel → System and Security → System.

2. Click " Extra options... " In the properties panel, click "Options" in the "Performance" block.

3. Go to the “Advanced” subsection.

4. In the block " Virtual memory» click "Edit".

5. Uncheck the “Automatically select...” option.

6. Click the radio button “No paging file”, click “OK”.

Advice! To reduce the size of pagefile.sys., click “Specify size” and enter the file size in megabytes in the “Initial ...” and “Minimum ...” fields.

Hiberfil.sys

IN this file Data is saved when the PC goes into a special “Sleep mode” - hibernation. If you do not use this option, do the following:

1. Open Start. In the search bar, type - CMD.

2. Run the application that appears in the panel with administrator rights.

3. Enter the directive - powercfg.exe /hibernate off

4. Press "Enter".

You can also disable hibernation through the “Run” panel (launched by the “Win ​​+ R” combination). Type in its line - powercfg –h off and click “OK”.

Successful Windows cleaning!

The free space of drive C is constantly decreasing during the operation of Windows. Regardless of the user's actions - whether he wants it or not. Temporary files, archives, cookies and browser cache and others software elements, having completed their one-time mission (updating, installing, unpacking), settle in the folders of partition C. Plus, useful megabytes and gigabytes absorb some functional modules Windows.

The first remedy for such “clutter” is a comprehensive cleanup of the C drive. It must be performed regularly and in a timely manner. Otherwise, the partition will become full, and you will not be able to fully use the OS and, accordingly, the PC. Windows will constantly interrupt your work with warning messages - "out of memory". It will become impossible to watch videos online, since the browser will not be able to save content downloaded from the server on the computer. Other troubles may also occur.

Getting started cleaning drive C: what you need to know and do

Removing from disk From all sorts of unnecessary elements- The procedure is very delicate. Requires increased caution and attention from the user. “Cleaning” should not harm the OS.

Deleting files in folders is contraindicated:

• Windows (the heart of the OS - all its components are stored here);
• Boot( boot files systems);
• ProgramData (entirely impossible! installed applications may not launch);
• ProgramFiles (installed software);
• Users (user data).

Some folders that need to be “cleaned” are hidden by default, that is, they are not displayed in directories. To get to them, do the following:

1. Press the key combination “Win ​​+ E” at the same time.
2. In the Computer window, press the Alt key.

3. At the top of the window will appear horizontal menu. Hover over the "Service" section. In the submenu, click “Folder Options...”.
4. In the Options settings, go to the View tab.
5. Scroll to the bottom of the list of options in the "Advanced Options:" section.
6. Uncheck the box next to “Hide protected system…”. Click on the radio button “Show hidden files… ».

7. Click OK.

Where to start cleaning drive C?

First of all, you need to empty the trash:

• hover over its icon;
• click the right mouse button;
• Select “Empty Trash” from the menu.

Large and small files, regardless of which partition they are stored in (drive D, E or C), after deletion, are sent to C:\RECYCLER, the “Trash” file. As a result, the free space of the system partition decreases. Deleting a large video file or image (for example, iso file) if there is a shortage of extra gigabytes, it can easily lead to disk C becoming full.

Advice! Before emptying the Recycle Bin, check your desktop for unnecessary shortcuts. Their sizes are not large, but the fewer useless files there are, the better.

Disk cleanup using standard Windows utility

1. Click the Start icon.
2. In the right column, click Computer.
3. Right-click on the C drive icon. Select “Properties” from the menu.
4. In the properties panel, on the “General” tab, click the “Disk Cleanup” button.

5. Wait a little while the system checks the directories for unnecessary files.
6. Next, in the “Delete” section following files", select which elements to delete and which to leave (check the boxes).

7. Click "Clear" system files", and then - "OK".

Note. The use of this utility can be limited if there are no severe “clogs” in the system. When you need to clear 2, 3, 5 or more GB, you need to perform several more procedures, which include not only deleting separate files, but also changing OS settings.

Removing unnecessary files from system folders

Quite often, users, without knowing it, “put” content and software into special folders OS designed for storing various information: “Downloads”, “Images”, “My videos”, etc. Many programs and browsers default (without changing initial settings) send data exactly to these directories.

Open them one by one and remove everything unnecessary. Move files that are of particular value to you to a logical partition (for example, drive D, E).

Advice! Be bold. Here you can delete any element, and Windows will not suffer from it.

Temp folder

One of the main sources of OS clogging. It contains antiviruses, drivers, applications, and games. This happens during updates and installations. After tasks are completed, the completed files remain in “Temp”. Of course, they need to be removed from there periodically.

1. On drive C, go to the “Users” folder.
2. Click the folder with your name account(Username).
3. Then go to "AppData".
4. In the “Local” directory, open the “Temp” folder.
5. Empty it completely (send all files/folders to the trash).

Advice! If you use file manager « Total Commander": create new tab(key combination “Ctrl” + “up arrow”) and go to the Temp folder. This way, you will always have its contents in sight.

Disabling the page file

Pagefile.sys is the OS virtual memory. When RAM (random access memory) resources run out, the system saves the out-of-place data to this file. If on your PC RAM capacity exceeds 4.6 or 8 GB, the “Pagefile.sys” container can be disabled. It takes up approximately the same amount of disk space as RAM. For example, if your PC configuration has 16 GB of RAM, then Pagefile.sys will be about the same.

To disable the page file:
1. Through “Start” (Win icon) open “Control Panel”.
2. Under System and Security, select System.
3. In the settings window, click “Advanced options...”.
4. In the System Properties panel, on the Advanced tab, click Options.
5. In the “Performance Options” option, on the “Advanced” tab, in the “Virtual Memory” section, activate “Change...”.

6. In the “Virtual Memory” window:

• select drive C;
• Click on the “No paging file” radio button;
• Click the “Set” button, and then click “OK”.

7. Restart your PC.

Hibernation Disables

Hibernation is a type of sleep mode: when the user is inactive for a certain period of time, the OS saves all settings in special file hiberfil.sys. Windows, like Pagefile.sys, reserves free space for it in C equal to the amount of RAM.

Therefore, if you do not use hibernation mode, it is better to disable it.

1. Press "Win + R".
2. Type "CMD", press "ENTER".
3. In the console command line enter “powercfg -h off” (without quotes), then “ENTER”.
4. Restart the OS.

Using third party utilities

Cleaning the C drive can easily be “entrusted” to a special cleaning program, for example, CCleaner. It can automatically empty the recycle bin, memory dumps, clipboard, and delete temporary files (cookies and cache) popular browsers, as well as perform many other operations to remove system “junk”.

Always monitor the capacity of disk C. Do not allow it to become full. Deleting unnecessary files is not just for the purpose of freeing disk space, but also for prevention.

Good luck! Let your PC store only useful information.

Sooner or later, the computer owner may be slightly disappointed. It's quite disappointing to discover that HDD suddenly it becomes completely overloaded, as the system itself actively declares. It’s even sadder if it turns out that it’s the system disk.

When the hard drive is overloaded, it needs to be cleared of junk files

In this case, you don’t have to be surprised at all why the computer began to work slower, why it freezes and slows down quite often. If you also encounter this problem, then you need to help your computer get rid of unnecessary junk. Cleaning the hard drive or a separate disk space on it helps with this.

To successfully cope with such a task, an experienced user will need only a few minutes. For a beginner, such a task seems overwhelming and difficult to complete. However, this is only a prejudice arising from ignorance. It will continue until the beginner studies the instructions on how to clean the hard drive on Windows 7.

A lot of unnecessary things are stored in the “Temp” folder, and this is what you should clean out. To open the “Temp” directory, launch the “Run” utility by pressing the “Win” and “R” keys simultaneously, enter “%temp%” in the white window, then press “Enter”.

After opening a new window, click the “Alt” key. Now, in order for you to be able to see the “garbage” that needs to be removed, it is important to display it, since it is hidden.

To display hidden files, open the “Control Panel”, find the “folder options” line, click on it. Now a new window will open, in which go to the “View” tab. There you will find a block called “Advanced Settings”.

In it, scroll the slider down to find the line “Show hidden files”, check the box next to it, click “OK”.

Now all hidden files will be visible, select everything you see and delete. Of course, if there are too many files, it is unreasonable to select one at a time, so you can optimize the process of performing such actions.

Click on any file, and then hold down two keys: “Ctrl” and “A”. After deleting the selected files, be sure to delete everything from the Recycle Bin. Now you can make sure that the hard drive was able to get rid of excess “garbage”.

By the way, by getting rid of temporary files, users often also quickly get rid of viruses, which often choose the “Temp” directory as their temporary refuge.

Removing system files

System files are important for correct Windows operation, so you can’t just delete everything without understanding what the file is intended for and what its meaning is. However, following the instructions experienced users, you can say goodbye to those system objects that are not directly needed for the operation of your PC.

You can completely disable the page file. Open the “Control Panel”, find the “System” parameter, click on it, now on the left side of the window that opens, find the line “Advanced system settings”, click on it too.

Now a new small window will open, in which go to the “Advanced” tab. In the first “Performance” block, click on the “Options” button. After this, a new window will open again on the screen, in which you will also have to go to the “Advanced” tab.

In the lower “Virtual Memory” block, click on the “Change” button. In the window that opens, find the line “No paging file”, place a dot next to it and finally click “OK”.

Some users decide to delete the hiberfil.sys file. It is responsible for saving all settings when the computer goes into sleep mode. Occupies hiberfil.sys huge space, sometimes reaching 5GB. Think carefully about whether it really matters to you that your computer starts quickly after waking up from sleep mode. If you are ready to say goodbye to hiberfil.sys, move on.

Launch the “Run” utility by pressing two “Win” and “R” keys at the same time, now enter powercfg-h off. Then the system will do everything automatically.

Alternative cleaning

If for some reason you would not like to use standard methods cleaning found in Windows, you can use others alternative ways, thanks to which the hard drive can also get rid of unnecessary “Garbage”.

You can download special programs that carry out automatic cleaning disks, or you can use the BIOS.

Possibilities

When installing an operating system, you sometimes have to use it to set up the startup disk.

During the subsequent installation, it is possible not only to completely remove everything from the hard drive, but even to format it.

Even if there are viruses hidden somewhere on the hard drive, and you couldn’t find them, you can easily get rid of them through formatting. At the same time, you will achieve the desired expansion of free disk space.

Experienced users can easily share how to clean a hard drive through BIOS. There is nothing complicated in this procedure, but you will have to be careful during the manipulations.

So, to carry out the formatting procedure through BIOS, make sure to purchase a boot disk or recovery disk.

Best to have boot disk, then you will be able to format the disk space through the BIOS, and then immediately install a new Windows.

Insert the boot disk into the drive, restart the PC, and during the next boot, press the “Delete” button; in some versions you have to press the “F2” or “F8” buttons.

Enter the BOOT section, set the boot option from the drive, after which a welcome message will appear, and then immediately install the operating system. Next step there will be a choice of disk space that you want to clear through the formatting procedure.

Select the system partition by clicking on it; several action options will immediately appear below. You should select “Format”, the process will begin, in a few minutes the disk space will be as if new.

All subsequent actions will depend on your desire, you can continue the procedure Windows installations, or you can complete the process here, since you have already definitely achieved your goal. After some time, you can return to your PC and install the OS that you have now removed.

So, the process of removing unnecessary “garbage” and complete cleaning disk space is simple. You should only try once, test your skills in practice, and after a while you yourself will not notice that you have already become a pro in this matter.

If your local disk is clogged, all processes on your computer may become slower, and there will be no room left for anything new. You can clean Disk C manually, going through folders one by one, but it is better to use special programs that will help you with this. Don't forget about the cache, cleaning the registry and promptly deleting the contents of the recycle bin. In this article you will learn how to clear the contents of a local disk as quickly and conveniently as possible, as well as how to format it completely. Formatting hard drive may need various reasons, and this process will not take much time. Take into account all the tips in this article.

How to clean local drive C

Even if you don't have a lot of information stored on your hard drive C, it can become clogged and inevitably cause problems when working on your computer. To execute complete process cleaning, you need to follow these steps:

• Manually clear folders of unnecessary media.
• Erase downloads.
• Remove old unnecessary programs.
• Clear your computer's cache.
• Clean the registry.

After this, you can free yourself from several gigabytes to hundreds, depending on how many unnecessary files you have accumulated.

Clean out your media folders

You may have downloaded movies to watch, music and a lot of pictures. It's time to delete all these files, especially if you no longer use them.

Delete any files that may be in the “Pictures,” “Videos,” or “Music” folders. You may also have your own own folders for these purposes.

Erase downloads

A huge number of old files always accumulate in the “Downloads” or “Downloads” folder. You may not even remember such a folder exists if you changed your download settings and now all downloads are saved on your desktop. Go to “Downloads” in the “Users” folder and clear it of old files, sort the ones you need, and simply delete the rest.

Empty your trash regularly

The Recycle Bin should be emptied regularly, and if you are deleting large files, right away. After cleaning downloads, media and other large files, immediately right-click on the trash icon and click on “Empty trash”.

The size of the files in the Recycle Bin may surprise you. As you can see, in the screenshot below, 25 Gigabytes of files fit in the basket.

Download CCleaner and clear the cache

The most convenient program to clean your computer from all possible - CCleaner. With it, you can not only clear the system and application cache, but also delete files you don’t need.

• Download the program from the link and install it on your computer.

• Once you open the utility, go to the “Tools” section. This displays a list of all programs that are installed on your computer. Select the one that you have not needed for a long time and click on the “Run Uninstaller” button. Repeat with each program.

• Now go to the “Cleaner” tab and first clear the contents of the “Windows” section by clicking on the “Run Cleaner” button.

• And then the “Applications” section, repeating the steps. This way you not only removed unnecessary programs, but also cleared the cache on your computer.

Clean the registry

This is an important point, but it is also the most responsible. If you click on the wrong folder and delete it, the consequences can be dire. Follow the instructions exactly.

• Open Start and type Regedit into the search bar. A file will appear at the top that you need to click on.

• Wait until the Registry Editor window opens in front of you. Open the “HKEY_CURRENT_USER” folder. Look carefully at the title.

• Here in the long list you will see the “Software” subsection, where all residual files from uninstalling programs. The user does not always know that when deleting a program, he still leaves data about it on the computer. To get rid of them completely, you need to clean the registry. Find the folder with the name of the program you deleted and erase it. Repeat this with all folders that are already named remote programs.

How to completely clean up drive C

When we're talking about O full formatting system, then everything is extremely simple:

• You need to log into your computer.
• Right-click on the local disk.
• Select the “Format” line.

If you're doing this for complete reinstallation system, then formatting can be done during the rearrangement, and not in advance. It’s better to take a flash drive and first transfer important files to it.

Over time, a large number of unnecessary files accumulate on the main partition of the hard drive, which is called the letter C by default, taking up a lot of space. Since the disk allocated for the system and system elements, most often has a small volume, then the presence of temporary files and files left over from remote programs can lead to free space the disk space will become catastrophically low. Manually deleting files from this drive is very difficult since they may be located very deep in the folder system, and also dangerous because you may accidentally erase items needed for correct operation computer. To safely clean up your system disk in Windows 10, your best bet is to use the built-in Disk Cleanup program.

Windows 10 Disk Cleanup: Built-in Tools

There are several ways to open the Disk Cleanup program in Windows 10. Remember that you should only use it if drive C is full, and you can clean it by deleting third party programs, there is no possibility.

Through command execution

Via control panel

How to use the program

1. In the “Disk Cleanup” block, you need to check all the departments that you want to clean.
2. Having selected a department, you can read all the information about what it contains, as well as view the files that belong to this section by clicking the “View files” button.
3. To proceed to removing system files, click the “Clean up system files” button. You will need administrator rights to access this feature. But it is better not to remove any elements of the system, as this may lead to system breakdown or incorrect operation.
4. In the “Advanced” tab, you can proceed to deleting unnecessary programs by clicking the “Clean” button in the “Programs and Features” block.
5. In the “System Restore and shadow copying» You can click the “Clear” button to proceed to deletion unnecessary points recovery, which also take up space on drive C. It is not recommended to delete all points, and it is also better to save one or two of the last ones in order to always be able to roll back the system if some error that cannot be corrected by other methods occurs.
6. Once you have selected which partitions you want to clean and have ticked them, click the OK button to begin the process. Do not interrupt the cleaning process or turn off the computer so that no errors occur and all files are deleted correctly.

Advanced Cleaning

Each user with administrative rights has the ability to run Disk Cleanup from big amount points than is available during normal startup.

What to do if the application does not start

The program may not open using any of the above methods only because the file responsible for launching the application is not in the default path. Try to find this file manually, it may be located in the following path: C:\WINDOWS\ServicePackFiles\i386. If it is not there either, or the folder itself does not exist, then there is only one thing left to do - use third-party programs to clean up the disk.

How to clean up drive C on Windows 10 using third-party programs and applications

There are many programs that allow you to clean your hard drive from unnecessary and temporary files. Many of them are distributed on the Internet for free and are in no way inferior to the built-in Disk Cleanup program. Next, we will consider the most popular, convenient and easy-to-use applications.

CCleaner

TO positive aspects This program includes the following qualities:

Kaspersky Cleaner

A program from a well-known campaign that previously specialized only in antiviruses, but has now started producing applications with other tasks. You can download Cleaner from Kaspersky from the official website by finding it in general list all programs -

The main advantage of the application is its simple design, which allows you to do everything necessary tasks by pressing one button “Start scanning”.

Also, if you don’t like the changes made by the program after the last session, you can cancel them by clicking the “Cancel Changes” button in the main menu.

What can cause your hard drive to fill up?

If you have cleaned up your disk using one of the above methods, but have not freed up enough space, try the following:

• Manually go through all the files stored on the drive and see which ones can be moved to another drive or deleted. Do not touch system files and programs; you can only move and edit elements that you personally added.
• Remove unnecessary third-party programs that are definitely not useful to you.
• Check your computer for viruses. Perhaps the virus itself takes up some of the free space or regularly downloads advertising files and applications that clog up the disk.

It is recommended that you clean out your C drive regularly, as how busy it is will determine how quickly your computer can find necessary files and provide them to the user. That is, if drive C is overloaded, the system runs slower. And also, all browsers and other programs send temporary files and cache to the main disk by default, and if there is no space on it, then there will be nowhere to store the necessary elements. Based on all the problems described, we can conclude that it is worth cleaning the disk using special programs at least once a month.