Is it possible to connect an external keyboard to a laptop? Keyboards and mice for a desktop computer

People who work with large volumes of texts notice that using a wireless keyboard is much more convenient. New laptops are getting smaller, screens are more inconvenient, and tablets are generally impossible to type on. Then there is only one way out - to purchase portable device and actively work with him. Now let's look in more detail at how to connect a wireless keyboard to a laptop.

There are two types on the market: the first is a radio keyboard, and the second is Bluetooth. The principle of their connection is very similar, so we present general provisions, dwelling in detail on features only where necessary.

1. Check Bluetooth connectivity. Your laptop must support this technology. Not all models have a built-in adapter. Most often you have to buy it separately. In this case, you need to first install the receiving signal, and only then deal with the keyboard.
2. For a radio keyboard, you must have an RF (radio frequency) signal configured. If there isn’t one, then don’t bother setting it up. It's easier to switch to Bluetooth.
3. When you are sure that the connection is possible, estimate the distance from the laptop to the signal receiver on the keyboard. There should be no monitor, processor, metal objects, fluorescent lamps, or electrical appliances between them. Provide apparent distance at least for the duration of the first launch.
4. All portable keyboards are self-powered, so take care of the batteries. The entrance for them is located on the back side.
5. Any device of this type must be accompanied by installation disk. Insert it into your laptop and follow the steps according to the prompts. It should appear on your system special program for settings and keyboard control.
6. Now take the nanoreceiver. This is a small rectangular transmitter that comes with the kit. It is he who performs the function of transmitting signals from the keyboard to the laptop. Insert it into an available USB port. After this, the laptop will search for the device itself and you will only have to wait for a message that everything is ready for use.
7. If you connect a Bluetooth keyboard, first activate the device on it, then on the laptop. Go to the program responsible for the search wireless devices, and select the “Pair the Device” option. The system will prompt you what to do next. At the end, a message box will also appear indicating that the device is ready.
8. Check if everything is working by opening a Word or Notepad file and typing a few phrases. Separately click additional buttons — Caps Lock, Esc, Home, End, tab and others.

And finally, if you did everything correctly, congratulations on you being the owner of a convenient and desired device. And if the keyboard does not work, you need to look for reasons. May not work USB input or there may be interference in the radio signal path. Move your devices closer and try again.

To connect you will need a cable, necessary drivers and a radio module if you plan to use wirelessly. This may be required in case of a malfunction of the main keyboard and for the convenience of working with the laptop.

Connection options

You can read the instructions on how to connect the keyboard to your laptop. Connection diagram for models different manufacturers is the same, and it does not matter what operating system is installed.

You can choose one of the proposed methods:

• with help USB cable(then the necessary drivers are installed and the configured keyboard can be used);
• using a PS/2 connector (outdated, but still works);
• using a radio module (the option is used to connect using a radio transmitter, which is inserted into the USB connector, then automatic installation and setting).

Please note, when answering the question of how to connect a keyboard to a laptop, it should be noted that it is possible to use only compatible devices. Otherwise, the laptop may fail or undergo other damage that may require repair. Using the remote keyboard is very simple; it allows you to control the device from a distance of several meters, without getting tangled in wires.

If there is no pre-installed module, you will need to open the task manager, open the list of connected devices and press the install or update drivers key. This action is carried out using the Windows Driver Installation and Configuration Assistant.

Connection features

In the instructions you can read basic information about how to perform this procedure. It also lists the system requirements that you need to familiarize yourself with. If they satisfy the characteristics of your operating system, you need to go to the connection:

• connect the keyboard using the USB cable included in the kit or a radio module in the form of a transmitter;
• wait for the window to install and configure drivers to appear;
• make sure the device is ready for use.

If you have connected a remote keyboard to your laptop, make sure that it has a battery installed and is connected to installed module into the USB socket. The battery needs to be replaced periodically; switching on/off occurs using a switch. A keypad connected via a cable can be used as a full-fledged keyboard.

You only need to install the drivers once; all subsequent connections only require a connection. No configuration is required. You can check the job status at any time by opening the icon in Control Panel. In the device details window, you can see whether the device is working normally or if there are any problems.

You can connect not only a keyboard to your laptop, but also a monitor, mouse and other devices.

If there are any problems, you can use the tools in the control panel or fix the problems yourself if you have the appropriate skills. When connecting the keypad to a new computer, you will need to follow the steps described above and, if necessary, use technical support.

During operation, you may encounter difficulties such as incorrect operation drivers. In this case, you will need to disconnect the keyboard, remove the drivers, reconnect the device to the laptop, install and configure the drivers.

After installing the drivers, you need to make sure correct operation keypad, this is done from the control panel and the list of connected devices. In the details window, you can check whether the connected keyboard is working normally.

I think no one will deny that the popularity of tablets is Lately has grown a lot and many users cannot imagine their work without this gadget

But tablets (in my opinion) have a significant drawback: if you need to write something longer than 2-3 sentences, then it becomes a real nightmare. To remedy this, there are small ones on sale. wireless keyboards, which connect via Bluetooth and allow you to close this drawback (and they often even come with a case).

In this article, I wanted to look step by step at how to set up connecting such a keyboard to a tablet. There is nothing complicated in this issue, but as with everything, there are some nuances...

1) Turn on the keyboard

The wireless keyboard has dedicated buttons for turning on and setting up the connection. They are located either slightly above the keys, or on the side wall of the keyboard (see Fig. 1). The first thing you need to do is turn it on; as a rule, the LEDs should start flashing (or lit).

2) Setting up Bluetooth on the tablet

In the settings you need to open the “Wireless networks” section and turn on Bluetooth connection(blue switch in Fig. 2). Then go to bluetooth settings.

3) Select a device from the available ones...

If your keyboard is turned on (the LEDs on it should be blinking) and the tablet starts looking for devices available for connection, you should see your keyboard in the list (as in Fig. 3). You need to select it and connect.

4) Pairing

The pairing process is the process of establishing a connection between your keyboard and your tablet. As a rule, it takes 10-15 seconds.

5) Password for confirmation

The final touch is that you need to enter a password on the keyboard to access the tablet, which you will see on its screen. Please note that after entering these numbers on the keyboard, you need to press Enter.

6) Completing the connection

If everything was done correctly and there were no errors, then you will see a message that the bluetooth keyboard is connected (this is a wireless keyboard). Now you can open Notepad and type to your heart's content.

What to do if the tablet does not see the bluetooth keyboard?

1) The most common thing is a dead keyboard battery. Especially if this is your first time trying to connect it to a tablet. Charge the keyboard battery first, and then try connecting it again.

2) Open the system requirements and description of your keyboard. What if it is not supported by Android at all (note also the Android version)?!

3) Yes special applications on "Google Play", for example " Russian Keyboard" By installing such an application (it will help when working with non-standard keyboards) - it will quickly eliminate compatibility problems and the device will start working as expected...

Connecting a keyboard to a laptop (Windows 10)

In general, you need to connect an additional keyboard to a laptop much less often than to a tablet (after all, a laptop has one keyboard

). But this may be necessary when, for example, the original keyboard is stained with tea or coffee and some keys do not work well on it. Let's look at how this is done on a laptop.

1) Turn on the keyboard

A similar step as in the first section of this article...

2) Does Bluetooth work?

Very often Bluetooth is not turned on at all on the laptop and the drivers are not installed on it... The easiest way to find out if it works wireless connection- just see if this icon is in the tray (see Fig. 7).

Delivery of drivers in 1 click:

3) If Bluetooth is turned off (for those who have it working, you can skip this step)

If you have installed (updated) the drivers, then it is not a fact that Bluetooth works for you. The fact is that it can be turned off in Windows settings. Let's look at how to enable it in Windows 10.

First, open the START menu and go to settings (see Fig. 8).

Then turn on bluetooth network(see Fig. 10).

6) Well done

The keyboard is connected, in fact, you can work with it.

7) Check

To check, you can open any notepad or text editor- letters and numbers are printed, which means the keyboard is working. Q.E.D…

I'll wrap it up here, good luck!

Technology developers always strive to achieve one goal - to increase human convenience and comfort. is no exception. The weight and size of laptops have decreased, routers have made it possible to access the Internet without eternal problems with connectors and cables, the examples can be listed almost endlessly. Let's talk about one of these know-how in more detail. We will talk about setting up and connecting a wireless keyboard.

When purchasing a new wireless keyboard, keep in mind that it should come with three items. The first of them is the keyboard itself, the second is a disk with drivers, the last is a wireless adapter that connects via a USB port and works on the Bluetooth principle. Sometimes this kit may include several batteries, but often you have to purchase them separately. Rechargeable batteries are perfect for this purpose, although they are quite expensive, but unlike regular ones, they can be charged, and they also hold a charge much longer. In addition, there are kits on sale that also include a mouse. However, everything depends directly on the manufacturer and price. So, let's proceed directly to the installation. To begin, insert the disk on which the drivers are recorded into the drive, and as soon as it starts, a menu should appear. But if nothing appears automatically, then you need to start it manually. To do this, go to“Computer” or “My Computer” if you are using the Windows XP operating system. Next, double-click the left mouse button on the drive icon and in the window that opens, find the file called “Install.exe” or “Setup.exe”. Launch it and you can start connecting the keyboard to your computer.

Now you need to connect wireless adapter to the USB port. By the way, sometimes such connectors are equipped with an LED to make it easier to understand, which will start blinking when the connection with the keyboard is established. If there is any problem, the light bulb will not work. And if you have connected a laser bear before, then this experience will help, since the installation is similar.

Next you need to insert the batteries. Installing them does not require extraordinary knowledge, and we hope that you can do it yourself. If the keyboard does not work, turn it over and examine it carefully. back cover, there should be a switch on it in the form of a small lever. It should be moved to the “ON” position, this should turn on the power to the product. Next, a message will appear on the desktop that the system has detected a new device, and Windows will automatically install drivers from the previously launched disk. When the setup is complete, restart your computer and you can use the keyboard.

And if you have problems with the BIOS system, you will have to abandon the idea. Take out the keyboard from regular cable, since the old ones do not support USB adapter settings, and the Windows driver itself is not included.

The Bluetooth keyboard communicates with the computer via a Bluetooth transceiver.

If your keyboard does not have a Microsoft Bluetooth transceiver, you must connect it using your computer's built-in transceiver (non-Microsoft) and your computer's Bluetooth configuration software.

• If your keyboard has a Microsoft transceiver with a First Connect button, you can use it to launch the Microsoft Connection Wizard. It will help you establish a connection via Bluetooth.
• If your keyboard has a Microsoft Bluetooth transceiver without a First Connect button, you need to connect the transceiver and then connect the device using Bluetooth setup software on your computer.
• If your computer has a third-party built-in transceiver, you can connect your device to your computer directly by using the Bluetooth software setup tool on your computer, but without using a Microsoft Bluetooth transceiver.
• Note. Power button on new devices with Bluetooth technology, such as the Wedge Touch Mouse and Sculpt Touch Mouse, you need to press and hold for about 5 seconds to pair the device with your computer.

Using a passkey

You must always set a passkey when you connect a keyboard or numeric keypad to your computer. The method for setting the passkey depends on the Bluetooth program on your computer. If your Bluetooth software offers different ways to create a passkey, let it create the passkey automatically instead of specifying one yourself or not specifying one at all. When you enter a passkey, it will not appear on the screen. After entering the access key, you need to press the key ENTER on the keyboard or numeric keypad to complete the connection.

Connecting a keyboard using a Microsoft Bluetooth transceiver with First Connect button

Some Bluetooth keyboard models have transceivers with buttons that make it easier to connect the device to your computer.

1. Connect the Microsoft Bluetooth transceiver to the USB connector.
2. Press and hold the Connect button on the USB transceiver for five seconds. The Microsoft Connection Wizard appears.

1. Launch Microsoft Mouse and Keyboard Center.
2. Select a Bluetooth keyboard that uses a transceiver with a First Connect button.
3. Go to the tab and click the Connect button.
4. Follow the wizard's instructions to connect the device.

Connecting a Bluetooth keyboard without the First Connect button

U Keyboards Elite for Bluetooth and Wireless Optical Desktop for Bluetooth do not have a First Connect button on the transceivers. additional information To connect these keyboards to your computer, see the Bluetooth device connection guide or documentation for your Bluetooth software.

Connecting a keyboard without a Microsoft Bluetooth transceiver

If your computer has a built-in Bluetooth transceiver, you can use it to connect your keyboard without using a Microsoft USB transceiver.

Attention!

When connected using a third-party Bluetooth transceiver, some advanced Mouse and Keyboard Center features may not work. The Mouse and Keyboard Center is designed to work with Microsoft Bluetooth software. In most cases, Toshiba Bluetooth software will be an equivalent replacement. Other software Bluetooth may work but is not supported.

1. Open the Bluetooth program on your computer. It's usually found in the Control Panel or Settings menu.
2. At the bottom of the device, remove the battery cover and switch the switch to Bluetooth mode.
3. For reconnection device to your computer, press and hold the Connect button on the bottom of the device for a few seconds. If the indicator light on the top of the device flashes green and red, the device can be detected by other Bluetooth devices within 2 minutes.
4. Once your mouse appears in the list, select it and follow the prompts to successfully connect your device.

Note.
The name of a specific command in different Bluetooth programs and different versions may be a little different.

Launching the Bluetooth program

There are several versions of Bluetooth software available that allow you to connect your device to a Bluetooth wireless transceiver. For information about using the program, refer to your computer's documentation or contact its manufacturer.

Equipment

Bluetooth program location

For some Windows 10 computers

Sequentially select Start > Settings > Devices > Bluetooth

For some Windows 8.1 computers

Sequentially select Charm > Settings > Change PC settings > PC & devices > Bluetooth

For some Windows 7 computers

Click Start, select Control Panel > Equipment and sound > Bluetooth devices.

If you for a long time If you used a desktop computer, then after switching to a laptop, you may notice that it is more convenient to use a separate keyboard than the one built into the laptop. Experience shows that the inconvenience increases even more when the dimensions of laptops decrease, and at the same time new restrictions appear when typing. In this case you have to sacrifice digital block and some auxiliary keys, combining them with others.

If you find all these changes unacceptable and your typing speed has decreased dramatically, then a wireless keyboard should be your choice. With it you get all the benefits of a keyboard standard sizes, but maintaining mobility, thanks to wireless interface. Next, we will show you how to connect such a keyboard to a laptop.

Instructions

Radio keyboard

1. First, make sure your laptop is compatible with these wireless technologies, like Bluetooth or RF (radio frequency). Purchase a wireless keyboard that supports the wireless interface found on your laptop.

2. Before connecting the keyboard, check that the keyboard and laptop radio modules are not closer than eight inches to sources of interference, such as: computer monitor, processor, metal objects, electric fans, fluorescent lamps And so on. At the same time, it is desirable to ensure direct visibility between connected devices, eliminating various kinds of obstacles.

3. Turn the keyboard back side up and open the battery compartment. Install batteries into it. Necessity autonomous power supply This is due to the fact that the keyboard is not connected by cable to the computer. Check that the batteries are installed with the correct polarity.

4. Insert the driver on the CD that came with the keyboard into the laptop drive and follow the instructions to install the driver along with the control application.

5. Insert the nanoreceiver (miniature transceiver) into a free USB port on the laptop. If you do not have a free port, use USB hub to expand the number of ports.

6. After this, the laptop will begin configuring the keyboard driver. Wait for the process to complete. At the end you will receive a message indicating that the keyboard is configured and ready to use.

7. Check the functionality of the keyboard by opening a document and typing a test message, using all keyboard keys (numbers, letters, function keys). Check the response to pressing “Caps Lock”.

Bluetooth keyboard

1. If your laptop has a wireless module bluetooth connection 2.0, then the installation will be somewhat easier. Load the wireless keyboard driver into your system.

2. Activate Bluetooth module, Pressing special button(see the laptop manual) and wait for the installation to complete. When the button is pressed (the indicator is active), your laptop will be able to connect to the keyboard.

3. Click right key on the keyboard icon on your desktop and select the “Pair the Device” option to connect a wireless keyboard. Follow the prompts until the keyboard is ready to use.

Conclusion

If the keyboard does not work, check for physical and radio interference on the path between the radio modules. Move sources electromagnetic radiation away. If this does not help, please refer to the problem solving section of your keyboard manual or contact the manufacturer's support service.

A computer is a complex machine. You can connect many additional devices. For example, a mouse or keyboard. These are extremely important components that allow you to work comfortably with operating system. Next we will talk about how to connect the keyboard to the computer. In fact, figuring this out is not as difficult as it seems. But users should be aware of some features of the process, since it is not always possible to connect the keyboard to the desktop computer or laptop. So what should you pay attention to?

Various models

The first and most important point is to determine the type of keyboard that will be connected. Today there are several models of these devices. How to connect the keyboard to the computer will depend on the type of component selected.

You can find the following connection connectors on keyboards:

• PS/2;
• Bluetooth.

So what to do in this or that case? What connection features should every user know about?

Not always possible

For example, sometimes it turns out that a particular keyboard model cannot be connected to a computer. Usually in this case the PS/2 connector is meant. Why?

The thing is that the corresponding connection socket is available only on desktop computers. Netbooks, laptops and ultrabooks do not have such connectors. Therefore, you will not be able to connect the corresponding keyboard. Although there are some techniques that can help resolve the situation.

However, the user must take into account that not all keyboard models are always connected to computers. Sometimes the reason for the failure of the corresponding component to work is non-compliance with system requirements. You will have to pay attention to them before purchasing an I/O device.

Connecting old keyboards

How to connect a keyboard to a computer? PS/2, for example? These keyboards are considered old. And so some modern users don't know how to act.

To connect a keyboard with a PS/2 connector to your computer, you need to:

1. Find the PS/2 connector on the back of the computer. It represents a round hole with 6 legs and a lock.
2. Insert the keyboard wire into the appropriate connector.
3. Turn on the computer or wait until the device is detected by the operating system.

It is important to note that the mouse and keyboard connectors for PS/2 models look the same. Their only difference from each other is the different color of the nests. Therefore, it is important to connect the input devices correctly. Most often, there is a miniature of the keyboard near the corresponding socket. You can make a connection both with the system unit turned on and off.

Through an adapter

How to connect a keyboard to a computer? PS/2 can also be connected to a USB connector, but this will require some effort. Many users don't see any point in this. The fact is that to successfully bring your idea to life, you need to purchase a special adapter. There will be a PS/2 socket at one end and a USB socket at the other. This is the only way to accomplish what you have planned.

How to connect a keyboard to a computer? If you want to connect your PS/2 model via USB, you need:

1. Buy a special PS/2-USB adapter.
2. Place the adapter onto the PS/2 connector.
3. Find a USB socket on your computer and plug the keyboard with the adapter into it.
4. Turn on or restart the operating system.

There is nothing difficult or special. After connecting the keyboard, you will have to wait a little. The device may not start working immediately, but after a few minutes. This is normal. During this period, keyboard drivers are searched for and installed. Once the appropriate software is installed, you can use the input device.

Via USB

The most popular and common type of keyboard is USB. It is with similar devices users work most often. How to connect a keyboard to a computer? It's not that difficult to do.

To use a USB connection, the user must:

1. Find a USB connector on your computer or laptop. This is a rectangular socket on the panel. Each computer has several of them.
2. Plug the device connection cord into any of the USB connectors.
3. Turn on or restart your computer.

Then you will have to wait for the drivers to be installed. If automatic installation does not occur, you must install the appropriate software yourself. It is either downloaded from the official website of the keyboard manufacturer, or included as a kit with the connected device. Installing the driver takes only a few minutes and is similar to initialization regular application for PC.

Without wires

How to connect a wireless keyboard to a computer? This question interests many users. After all, wireless computer components are appearing in stores more and more often. There is nothing difficult about it. You just need to follow a few instructions.

So, how to connect a wireless keyboard to your computer? To do this, the user must:

1. Insert the battery into the keyboard and switch the device state to “On” mode.
2. Plug a special USB receiver into the USB connector.
3. Install drivers for connected equipment. You can implement this idea later. A disk with software is included with the keyboard.
4. Synchronize your device with your computer. To do this, you need to go to the program installed with the drivers, and then select the appropriate hardware from the list that appears.

This is all. In fact, the connection is not that difficult. In some cases, it is enough to simply insert the battery or batteries into the keyboard, then turn it on USB receiver and restart your computer. But there is another option for the development of events.

Without receiver

This is a connection without a receiver. Quite a common method of action. How to connect a wireless keyboard to a computer without a USB receiver?

To do this, the user needs:

1. Insert the battery into the input device. Sometimes you need batteries to turn it on.
2. Switch the device to "On" mode.
3. Enable Bluetooth on your computer.
4. Find the keyboard and sync it with the machine.
5. Wait for the drivers to install. Sometimes you need to install the appropriate programs on your computer yourself.

Now it’s clear how to connect a keyboard to a computer in one case or another. As you can see, even a novice user can cope with the task.

When buying a laptop keyboard, pay attention to the connector with which it will be connected to the device.

You need a keyboard with a standard USB connector.

All you have to do is connect the keyboard to the desired USB socket of the laptop (usually on the right or left of the laptop) and after the laptop detects the new device, you can safely get to work.

I always use it myself additional keyboard which is connected to my laptop.

I will only say one thing: when moving the laptop away from the eyes, because the keyboard is installed in front of it, a person’s vision can be slightly impaired. The letters are small and far away. The eyes adapt to this, and if you work like this for a long time, it will be difficult for you to read small letters on product packaging. This is exactly what happened to me.

Connecting a keyboard to a laptop is very simple and does not require any additional programs. All you need is a USB connector, which is present in all models. Connect the keyboard through this connector and you can get to work.

This is the simplest action, all laptops have USB connectors, when buying a keyboard you should ask if it has them.

If there is one, you buy it and connect it, everything will configure itself and you can work.

There is nothing simpler, but there is one condition - your laptop must have a USB connector. I strongly doubt that there are now laptops that do not have this device. Moreover, you can also connect a monitor and work will be even more comfortable!

The laptop only has a USB input. Therefore, you need to choose a keyboard with a USB connector. Moreover, if you buy wireless model keyboards, the kit often includes wireless mouse. With such a purchase, you can kill two birds with one stone: both the keyboard and the mouse will be wireless, and only one USB input will be occupied in the laptop.

The fact is that old keyboards have a different connector, of blue color, round. But it is impossible to connect it to a laptop.

I use a wireless keyboard. connection to the USB connector, as always. You can also use a mouse connect - more convenient

There's nothing simpler than connect a keyboard to a laptop. To do this you will need any of them, with USB output, but there are such everywhere and they are the most common.

My child spilled water on my laptop and the keyboard stopped working. We connected another one and used it calmly. And then the old one started working.

Connecting a keyboard to a laptop is not very difficult. You just need to stick it in usb wire into the laptop connector. Everything will work automatically.

There are also wireless keyboards, and they are even much more convenient to use.

Basically, for connecting a keyboard to a laptop, you just need to choose a keyboard with a standard USB connector.

Further, to connect a keyboard to a laptop, insert the connector into a free USB input on the laptop and wait for the computer to find the keyboard driver. As a rule, after this a message appears at the bottom indicating that the keyboard is ready for use.

If the laptop does not find the keyboard driver on its own, you need to go to the Control Panel, then to the Device Manager, then find the keyboard and right-click on the keyboard. After this, all that remains is to click on Update driver and complete the keyboard installation.

I read your question a few days ago and was very interested in it, because some of the keys on the laptop stopped working. I thought I'd have to new laptop buy. But I read the answers and realized that everything was not so bad. I bought it today wireless ultra-compact Jet A keyboard(without a mouse, which suits me quite well: I’m used to not working without it). I connected the keyboard without any problems, placing the USB nano-receiver in the desired connector, and already on it, and not on virtual keyboard, typed this answer :-) Thank you all very much for the answers: it was real help, received by me at BV!

Recently, the laptop has gained great popularity in the field of computer sales. After all, this is a compact and wireless version of your desktop computer. The list of its amenities does not end with its small dimensions and ultra-lightness. Among all the advantages of a laptop, there are also disadvantages. This means short operating time without a network and low video adapter power. Some laptop users are unhappy with the flat keyboard buttons. A standard 101-key keyboard with the ability to connect to a laptop comes to their aid.

You will need

• Standard keyboard, PS/2-USB adapter.

Instructions