The wireless mouse does not connect. Wireless mouse and how to connect it

I've been using exclusively wireless mice for quite some time now. They are very convenient to use with both a laptop and a desktop computer. I've probably replaced about five already. True, we had to spend money on batteries, but latest model I took it with the charging option and am very pleased. Today the article is not about my gadgets, but about how to connect the demon wired mouse to a PC or laptop on Windows. The connection process itself is not very complicated, but since people ask, it means it’s not always possible to connect. I'll try to do it universal instructions, which is suitable for different mice (Logitech, Rapoo, Trust, Microsoft, Maxxter, Defender, HP, A4Tech, Razer, Speedlink, etc.), with different connection interfaces. Wireless, of course.

Today, the market mainly offers wireless mice with the following wireless connection interfaces:

Radio interface (Wireless)- these are those mice that are connected via a special USB adapter (receiver). It comes with a mouse. The connection itself most often operates at a frequency of 2.4 GHz and often suffers from interference (from the same Wi-Fi routers) . The connection is very simple: insert the receiver into the USB port of your computer/laptop, turn on the mouse and everything works. This is the most popular interface for connecting wireless manipulators.
Bluetooth– there are much fewer mice with this connection interest compared to a conventional radio interface (those with receiver). Basically it's more expensive models. They are very convenient to use with laptops, as they have a built-in Bluetooth module. And such a mouse connects without a receiver. But for a PC you will have to buy a USB Bluetooth adapter.
Wireless+Bluetooth– this is when the mouse supports two connection options. Through regular USB radio adapter and via Bluetooth (without adapter on laptops). To choose from.

I think you know which connection interface your wireless mouse supports. If not, see the instructions and information on the official website.

Let's look separately at the process of connecting via a radio interface (USB adapter) and separately via Bluetooth using the example of a laptop with Windows 10. There are differences. I will enter when connected via Bluetooth.

Connect a wireless radio mouse via a USB adapter

If your mouse comes with a USB receiver and this is the only connection interface (or Bluetooth is not present/not working on your computer), then you need to connect this receiver to the USB port of a laptop or desktop computer.

After Windows connections must install drivers. I have already connected many wireless mice, and I have never encountered a problem when Windows cannot find or install the required driver. If it happens that the system does not recognize the device, then you can try downloading the driver or software from the manufacturer’s website. We write in the search the name and model of our mouse. For example, “Logitech M185” and in the search results we go to the official Logitech website. There we are already looking for a section with downloads and downloading required driver. But you probably won't have to do this.

We insert a battery into the mouse, or charge it and turn it on. Perhaps after this the indicator will light up (but it may not exist).

After this, the mouse should work immediately. If it turns out that after connecting the wireless mouse does not work, then first of all:

Make sure that the battery is not dead (by replacing it) and that it is installed correctly.
Disconnect and reconnect the USB receiver.
Restart your computer.
You can go to Device Manager and see if the adapter appears in the "HID Devices" section. If we connect the adapter from Logitech mice, then the “Logitech USB Input Device” adapter should appear there. The name may vary.
You can test the adapter and mouse on another computer/laptop. Perhaps you have encountered a defect. This also happens.

In most cases, these devices connect and work without any problems at all. Especially in Windows 10, Windows 8, Windows 7.

Connecting a wireless mouse via Bluetooth (without receiver/adapter)

I would like to clarify right away that connect the mouse to desktop computer It probably won't work without an adapter. Since PCs usually do not have a built-in Bluetooth module. Therefore, first we need, then and only after that we can connect the Bluetooth mouse according to the instructions. Or use the wireless adapter that comes with the kit (if your model supports this interface).

It’s easier with laptops; they have built-in Bluetooth. True, it does not always work, since it is not installed necessary drivers. If there is no Bluetooth icon in the tray on your laptop and there is no adapter in the device manager, the corresponding settings in the parameters, then you need to first (on Windows example 10) . And the article contains instructions for Windows 7.

To connect, click right click mouse on the Bluetooth icon and select "Add device".

Turn on the mouse. Next you need to activate the connection mode. There should be a button for this. On my mouse it is labeled "Connect". It needs to be pressed (maybe press and hold). The indicator should start blinking actively. The process of activating the connection mode may, of course, differ depending on the manufacturer and model of the mouse. See instructions.

On the computer, in the window that has already opened, select “Add Bluetooth or other device.” Next, click on the “Bluetooth” item. When our mouse appears in the list, just click on it. In Windows 7, a window will immediately open showing the devices available for connection.

A message should appear indicating that the device is ready for use.

The mouse should already be working. Click "Finish". The connection is complete.

In Windows 7, everything is about the same, only the windows themselves and menu items look different.

This is a program with which you can configure additional functions. For example, assign actions to additional buttons, adjust the pointer speed, etc. It all depends on what kind of mouse you have. If it’s the simplest, then you may not need this program.

If the computer does not find bluetooth mouse, then first of all make sure that it is turned on and the connection mode is activated. Try connecting it to another device. You can even connect it to your phone or tablet (Android).

Automatically disable the touchpad after connecting a wireless mouse

On laptops, you can configure everything in such a way that after connecting the mouse (wireless or wired) The touchpad will turn off automatically. And this is very convenient, because it only gets in the way. For example, when typing.

As far as I understand, this can only be done when the touchpad driver from the laptop manufacturer’s website is installed on your laptop. I checked it on Lenovo, everything works.

Open Start (or search) and type “mouse”. Open "Mouse Options".

Go to " Extra options mice".

There should be an "ELAN" tab in the new window (yours may be different). You need to go to it and check the box next to “Disable when connecting an external USB mouse.” Click "Apply".

All is ready! Now the touchpad will not work when a mouse is connected.

If you were unable to connect the mouse, have any questions, or want to share useful information on the topic of the article - leave your messages in the comments.

Often, after purchasing a new pointing device, the question arises about how to connect a wireless mouse to a laptop without any problems for a novice user. As practice shows, there is nothing complicated about this; anyone can cope with it. This article will provide step by step guide, which will allow you to solve this problem without problems.

Advantages and disadvantages

Wireless manipulators have whole line advantages: easy to use (no need to pull wires and worry about not having enough length), work on almost any surface (the exception is glass, on which the optical sensor does not function), simple and easy to set up and operate (most often the operating system itself finds the drivers and installs them, the user does not take any part in this). Therefore, when purchasing new mouse More and more users are turning their attention to such devices. They have one drawback - the batteries periodically run out and need to be replaced with new ones. This is the most common reason that a laptop does not see a wireless mouse.

How to choose?

Before buying a laptop, you need to choose and buy it correctly. Before going to the store, you need to decide on a list of potential tasks. If you plan to watch movies, listen to music or visit websites, then a regular 3-button mouse with one scroll wheel will suffice. But gamers should turn their attention to more expensive devices that have more buttons and 2 wheels for scrolling.

During the selection process in the store, we evaluate ergonomics. The manipulator should fit comfortably in your hand. Next, we turn our attention to the manufacturer. Devices from the brands “A4Tech”, “Sven”, “Genius” and “Logitech” are considered the best in terms of price-quality. It is to them that it is recommended to pay attention. But if the budget is not limited, then you can choose “Mad Catz”. It's mice trademark cost about 160 USD, but at the same time they have an exclusive design and maximum convenience for the user specifically in gaming applications.

Batteries

Connection wireless mouse to the laptop, we start by installing the batteries. Any manipulator of this class runs on two standard finger-type batteries. Usually they come included, but there are exceptions. In this case, you need to check with the seller about the package contents at the purchase stage. If they are not available, then you need to additionally purchase two such batteries. Then we find the battery compartment cover on the mouse and open it. The polarity of the batteries is indicated at the bottom. Having fulfilled this condition, we install them, and then close this compartment.

Installing the receiver

The second step in answering the question of how to connect a wireless mouse to a laptop is to install the transmitter. It is equipped with a rectangular USB connector, with its help information is transferred from the manipulator to the computer. After opening the package we find it. In some mice it can be hidden in the battery compartment (this is a miniature device that can easily fit there). Next, find any rectangular USB socket on the laptop and install it.

Drivers

After installing the receiver, installation of the necessary software occurs automatically in most cases. At the same time, a message appears in the lower right corner of the screen stating that a new device has been found and it is being configured. Next, you will see a notification: “The new device is installed and ready to use.” This indicates that the software setup has completed. The manipulator should now work. That is, when it moves along the surface, the pointer on the screen will have to move. If this does not happen and the laptop does not see the wireless mouse, you need to check the batteries.

In some cases, to activate the manipulator, you must press the button marked “On/Off”. In this case, the optical sensor must light up. If the mouse is non-standard (for example, a gaming mouse), then install additional drivers. They can be taken either on the CD that comes with the manipulator, or downloaded from the manufacturer’s official website. In the first case, we use a drive. In the second, you need an Internet connection, where using search engines we find necessary information and download it. Then you need to install the drivers, following the instructions of the installation wizard. At the end, be sure to restart the computer.

Results

Within the framework of this article, we described step by step how to connect a wireless mouse to a laptop. The first step is installing the batteries. Next we connect the transmitter. If necessary, install additional drivers. At the end it is recommended to reboot everything. As you can see, there is nothing complicated. So we take it and do it. Good luck!

Today, wireless mice are very popular due to their ease of use. In addition, such a device is capable of making working space more neat around the computer. In this article we will tell you how to connect a wireless mouse.

If you have never worked with wireless devices, installing such a mouse may seem quite complicated. As a rule, the delivery package of such a device includes detailed instructions , which will necessarily show the procedure for connecting a mouse to a desktop computer or laptop. If there is no such instruction, it is enough to follow the steps described below.

To connect a wireless mouse, first locate the battery compartment in the device itself, which is located on the underside of the mouse. Open the cover of this compartment, install the batteries and put the cover back. As for the receiver, it does not require any batteries, as it is powered by the computer itself.

Connect the receiver to your computer. Usually a USB connector is used for this, but on sale you can find models of such devices that connect to the mouse connector. Sometimes there are situations when all the USB ports on your computer are busy, so you can use a special adapter to connect a USB receiver to the mouse connector. In this case, you should be very careful, as you may accidentally connect the device to the keyboard connector.

Now you need to make connecting the mouse to the receiver. Typically receivers have a prominent button for this, and mice have small hole with a button that can only be pressed using a needle or paper clip. Find these buttons on both devices and then press them at the same time. In this case, the mouse must be placed as close to the receiver as possible. The buttons should be held down for about 10 seconds. After this, try moving the mouse over the table surface and make sure that the cursor on the screen moves.

Modern wireless mice can use radio interface, Bluetooth, and some models even Wi-Fi technology . As a rule, the range of the receiver reaches 10 meters, which is more than enough for comfortable use.

It is worth noting that if you connected the receiver to the mouse connector, you will need to manually restart the computer. If you connect the device to a USB connector, you can use the mouse immediately. In addition, the delivery package of the mouse and receiver must include a disk with software (drivers). Therefore, if the mouse does not work after connecting and rebooting, install drivers, since perhaps your operating system does not have components to support the operation of such devices.

However, many modern laptops no CD drives so everything is necessary software have to download from the Internet. To do this, it will be enough to go to the official website of the mouse manufacturer, find the Download or Drivers section, in which, after specifying your operating system and mouse model, a suitable driver will appear.

As you can see, connecting a wireless mouse to a computer is quite simple and does not require any special knowledge. Finally, it is worth mentioning most well-known companies who are engaged in production wireless keyboards mice: A4 Tech, Apple, Asus, Dell, Hewlett Packard, Logitech, Microsoft, Rapoo and Trust.

So I decided to write about wireless mice, because... They are very popular today. They can make your workspace near your computer tidier. In this article I will tell you, how to connect a wireless mouse to a laptop.

If you have never dealt with wireless devices, then installing such a mouse may seem a little complicated. But as a rule, the device comes with detailed instructions that will show you how to connect the mouse to a computer or laptop. But it also happens that there is no such instruction, as then

How to connect a wireless mouse

First What you need to do before connecting a wireless mouse is to find the battery compartment, which is located on the underside of the mouse. Open the cover of this compartment, install the batteries and put the cover back. But the receiver does not require any batteries, as it is powered by the computer or laptop itself.

Second: Connect the receiver to your laptop. Basically, a USB connector is used for this, but on sale you can also find models of such devices that connect to the mouse connector. There are also situations when all the USB connectors on your PC are occupied, so you will have to use a special adapter to connect the USB receiver to the mouse connector. In this case, do not confuse it with the keyboard connector.

Third: You need to connect the mouse to the receiver. Receivers have a visible button for this, but the mouse has a small hole with a button that can only be pressed with a needle. We find these buttons on both devices and press them at the same time. In this case, place the mouse as close to the receiver as possible. The buttons should be pressed for about 10 seconds. After this, move your mouse around the table and make sure that the cursor on the screen moves well.

New wireless mice To synchronize with the receiver, they can also use a radio interface, Bluetooth, and some models and Wi-Fi technology. The average range of the receiver is 10 meters, which is more than enough for comfortable use wireless mouse.

Also, if you connected the receiver to the mouse connector, you will need to restart the computer, but if you connected the device to the USB connector, you can use the mouse immediately. And just in case, the mouse and receiver come with a driver disk. And if the mouse does not work after connecting and rebooting, then install drivers, since perhaps your OS does not have the components to support the operation of this device.

However, netbooks, for example, do not have CD drives, so drivers will have to be downloaded from the Internet. To do this, go to the official website of the mouse manufacturer, find the Download or Drivers section, in which, after specifying your operating system and mouse model, download the required driver.

A wireless mouse is purchased for a laptop, but many desktop PC users also prefer the “wireless” option. For example, if the PC is connected to a TV, it can be used as a kind of remote control remote control. Next, we’ll look at how it connects, what errors may occur, and how to deal with them.

Instructions for connecting via adapter

A wireless mouse adapter usually looks like a small piece of plastic free form, most often rectangular, from which a metal USB connector protrudes. This standard is usually called just that – “for a USB mouse”. Modern adapters They are very small in size and practically do not protrude beyond the laptop body. But small sizes can also become a problem - if the adapter is lost, it is difficult to find it.

Wireless USB mice are very popular due to their low price. Also, they usually do not need to configure anything for different OS- the adapter is simply inserted into a free port, and after a few seconds the mouse is ready for use.

In some mouse models, the adapter is not located separately in the package and is not inserted into the mouse from the outside, but is hidden in the battery compartment (bottom). The adapter can only be removed by opening the compartment.

Detailed connection instructions are as follows:

IN next video You can clearly see the unpacking of the new wireless mouse and its connection to the laptop via an adapter:

After connecting the mouse, you need to take into account the signal reception range. Most likely, you will not be able to control the cursor on the screen if the distance from the mouse to the adapter/laptop is more than 20 meters.

Is it possible to connect a wireless mouse without an adapter?

Yes, if the mouse was originally designed to work without an adapter. If your mouse must If there is an adapter (USB mouse), but for one reason or another it is not there, then, most likely, the problem cannot be easily solved. There are several ways out:

Find out via the Internet or at the nearest computer service center whether this model has the ability to connect to a laptop with another adapter from the same manufacturer. Many branded products allow you to connect multiple peripheral devices through one single adapter.
If a suitable adapter cannot be found, there is another option. Find the same used mouse on the Internet or in your hands, buy it at a low price along with an adapter and replace the hardware of your mouse with a similar one.
Sometimes there is a situation when you have a Bluetooth mouse, but the laptop does not support this communication standard. Then you can simply buy any Bluetooth receiver and insert it into your computer. Better yet, bring the mouse with you to the store and make sure on the spot that everything will work fine.
Many service centers may simply try to find you a suitable adapter. Although the likelihood of finding it is low, why not try?

If none of the proposed options suits you, the conclusion is sad - you’ll have to buy new set"mouse + adapter".

How to connect a wireless mouse without an adapter?

Wireless mice without an adapter rely on your laptop having a Bluetooth or Wi-Fi receiver. What type of transmitter is built into your mouse should be indicated in the description and also written on the packaging. Instead of Bluetooth, an abbreviation may be written, for example, BT 5.0. Your laptop must have the appropriate type of receiving device. The advantage of such mice is that the adapter will not be lost, because it simply does not exist.

To perform the following operations and before bringing the wireless mouse into working condition you will need either a wired mouse or an active laptop touchpad!

Bluetooth mouse

To connect a Bluetooth mouse, the Bluetooth signal reception mode must be turned on on the laptop. You can first check whether the Bluetooth module is present and whether it works normally (if you are sure that yes, then you can skip the continuation of the paragraph). Check its status in Device Manager. For example, for Windows 7 this is done in one of the following ways:

The video below will help you turn on Bluetooth if you encounter any difficulties:

Wi-Fi mouse

The instructions are similar to the previous one:

If you are not sure whether Wi-Fi is working on your computer, check that your PC has the appropriate Wi-Fi receiver in Device Manager (in the same way as described above for Bluetooth).
Activate in the same way Wi-Fi module bottom right on the desktop, just not through bluetooth icon, but through the corresponding Wi-Fi icon.
Find the mouse in the proposed list of detected devices and point to it.

Why won't my wireless mouse connect and what should I do?

After the operations are completed, most mice will immediately begin to work, but it happens that easy connection not enough. In this case, it is worth considering possible reasons problems that may cause your mouse to not work, and troubleshooting steps.

Don't try to search right away complex reasons malfunctions. Restart your PC, and only if this does not help, proceed to the search for the real root of evil.

Most common reason– the batteries are simply dead, so even if the connection is successful, the mouse does not work. This can be a problem if it's late at night and the mouse isn't working and you don't have spare batteries.
What to do? Take care of this problem in advance. Buy a pack of batteries and don’t forget to renew your stock. In addition, some mice do not have regular batteries, and batteries, and they come with a “USB – mini-USB” cord. Such mice can be recharged by plugging the cord into the USB connector (the mouse works normally), and after recharging, remove the cord and use it for a long time wireless mouse. Perhaps this is the best solution.
Another simple option is to have a spare regular wired mouse, it will help you out in case the wireless one fails.
Your mouse may require driver installation to function. If the package with the mouse contains small disk– insert it into the disc drive and follow the instructions. Sometimes there is no disk, but the mouse manufacturer prints on the packaging in large print link to the website with drivers. Enter the link in address bar browser and look for your model. If you are unable to install the driver yourself, contact a specialist or service center.
There are also models where the mouse and adapter need to be synchronized. Until this operation is done, the mouse will not work. This is done so that the signals of several mice in the same room do not overlap, interfering with each other.
What to do? The adapter usually has a clearly visible synchronization button, and sometimes also has a tiny indicator light. And there is a small hole made in the mouse, inside of which there is a small button. The button can be pressed with a match or paper clip. So, first press and do not release the button on the adapter (if there is an indicator, it will light up). Now click the sync button on your mouse. Both described buttons must be pressed simultaneously; keep them pressed for several seconds.
Check if the adapter is in place with your USB mice. It may seem strange, but sometimes you can forget about the existence of the adapter. And it is necessary. And your child or pet can pull out the adapter while playing.
The USB port may have failed. You can try moving the adapter to another, known working (tested) port. Another option is to find out whether the USB ports on the PC work at all; maybe they are disabled through the BIOS or uninstalled. Check the status of the USB ports in Device Manager.
Not all laptop models support Bluetooth, so connecting a BT mouse will not be possible. What to do? Have an external Bluetooth adapter if you have such a mouse. For WiFi mouse An adapter is unlikely to be needed - almost every laptop is equipped with a Wi-Fi receiver and can work with such a mouse.

If you ordered a mouse from AliExpress and at a very low price, then the quality may be appropriate, but the adapter or mouse may not work at all. This happens, so it’s better to buy a mouse with an adapter in places where they will connect it, check it and allow you to try it on your hand.

Connecting a wireless mouse to a laptop is not difficult, as you can see from simple instructions. In order not to encounter difficulties when connecting, it is worth testing the device at the time of purchase.