Wireless network connection properties settings. What to do if there is no Windows wireless network connection icon. What to do if there is no Internet connection on your computer? WiFi connection keeps dropping

If you forget your Wi-Fi password, don’t panic or immediately call the service technical support your Internet operator, since you can find out the forgotten password yourself. Which will not require you to have any specific technical knowledge or install additional software. All you need to do is follow the steps below.

The easiest way

The “Wireless network management” column is missing

In the version of Windows 7 SP1, the “Wireless Network Management” column is usually absent. Therefore, the instructions for recovering a Wi-Fi network password will be slightly different in terms of the points for opening the “Wireless network properties...” window.

The window of interest can be opened in two ways:

The familiar “Network Security Properties...” window will open, where we open the “Security” tab again and check the box next to “Display network security key.” We save the password.

Find out a forgotten Wi-Fi password by opening the router settings

If your manufacturer is different, then look in the settings for the “Wireless” tab and the “Security” tab. In which, among other things, there is a line “Password” - this is the forgotten password.

Other options to get a password for a Wi-Fi network

In addition to the above options, you can:

Reset (zero) the router settings (if you can configure them again), as a result of which you will be able to specify a new access password;
Your Internet operator's support service can help you recover your forgotten password. However, you will need to confirm eligibility Wi-Fi control the network has provided some data: the amount of the last few payments, the contract number, contact details of the person who concluded the contract, etc. (individually for each operator);
You can also find out your forgotten password using a tablet or smartphone that has an authorized Wi-Fi connection. The actions are similar to viewing the password in the router settings - open the router settings (using a mobile device) and look at the specified network key. This is the password.

Loading... Published: 03/17/2016

How to view your Wi-Fi password

dontfear.ru

This article will talk about what to do if Window 7 does not connect to the WiFi network. The fact is that although this operating system is more stable than its predecessors, various errors may still occur that must be corrected manually.

Before moving on to connection problems and their solutions, you need to understand what WiFi is and how the technology works. This will allow you to fix some problems faster.

The fact is that to connect to such a network you need an access point. Its functions are usually performed by wireless router. And so first of all, if not available connections to the WiFi network in Windows 7, you should pay attention to the router.

As a rule, this is the reason. But of course, there are other problems. So, let's take it in order.

Checking the router

Everything is very simple here. If the laptop does not see available connections, then you should go to the router’s WiFi settings menu and check whether the wireless network is turned on. To do this, you need to connect to the router using a regular Internet cable. After that, open a browser (any) and enter 192.168.0.1 in the address bar. Press "Enter". Next, a window will appear asking you to enter your password and login. As a rule, the default key and login are admin, admin, respectively.

How to easily find out the IP address of a WiFi router: Video

If you changed this data, then enter your values. Next we get to the settings menu. We are interested in NetworkWireless settings. In the wireless network settings, you need to check the box next to “Enable Wireless Router Radio”. That's it, setting up the router is complete. And if your laptop with Windows 7 still has problems with WiFi, then you should move on to setting up the operating system.

Why doesn't my computer see available wireless networks?

There can be many reasons for this, as well as solutions. Fortunately, Windows 7 is convenient and has many options for diagnosing and fixing certain problems. But we will consider only the most common ones.

Windows 7 does not connect to Wi-Fi: Video

The wireless network icon does not appear in the tray

Users often ask the question, what to do if the WiFi icon is not displayed in the tray in Windows 7? This can only mean one thing - the module wireless communication turned off or not working. Activation of Wi-Fi occurs, as a rule, using the key combination Fn + adapter power button. On different laptops This button can be located in different places.

Articles on the topic

For example, on Asus laptops it is the combination Fn+F2, on Lenovo it is Fn+F5. The WiFi power key itself is indicated by a corresponding image. In addition, on some models to activate the module wireless connection a separate key is provided. In this case, just press it.

So, after turning on the wireless adapter windows communications 7 should automatically start searching available networks. If this does not happen and the tray icon does not appear, then you should check that the drivers are working correctly.

What to do if a laptop with Windows 7 does not see Wi-Fi: Video

Checking drivers

You can check the software in Windows 7 in the task manager.

You can launch it by clicking on the “My Computer” shortcut, which can be found on the desktop, in the start menu or in Windows Explorer, with the right mouse button. In the window that appears, click “Properties”. Next, a menu will open in which you need to open “Device Manager”.

In the window that appears, we are interested in network adapters. If you do not find this, then there are no drivers for the device and you need to install the driver for of this module. If there is such an item, then open it. Typically, the wireless adapter is named Wireless Network Adapter The device may also be indicated by an exclamation mark. This indicates that the driver is not working properly and needs to be updated or reinstalled.

How to reinstall the WiFi driver: Video

It is also important to know that sometimes, even with the driver installed, the adapter cannot be turned on, since additional keyboard functions are used for this. This means that together with the software for network adapter You should also download the driver for the keyboard, as well as the recommended utility for managing the wireless module.

After installing all the necessary components, we try to turn it on again WiFi connection, as already described above. If everything is done correctly, Windows7 will automatically start searching for available networks.

System diagnostics

If you have completed all the above steps, but the laptop still does not connect to WiFi in Windows 7, then you should run a diagnostic. As a rule, in such cases, the system itself prompts you to turn it on, but if this does not happen, then you can start it as follows.

Open the “Network Sharing Center” and go to the “Change adapter settings” menu. Here we look for “Wireless network connection” and right-click on it. In the menu that appears, select “Diagnostics”. Next, follow the prompts on the screen. The system will automatically search for and fix problems. After this, the system itself will begin searching for available connections.

Above, we looked at the most common problems with connecting to WiFi networks on laptops with Windows 7 and options for solving them. However, other problems are quite possible, the solution of which requires an individual approach and a more in-depth diagnosis performed by a specialist.

What to do if the laptop sees Wi-Fi, but does not connect: Video

There are no available connections in Windows 7. Wi-Fi has disappeared, the network with a red cross

Yesterday I turned on my laptop, opened the browser, but the Internet did not work. I look at the status of my Internet connection, and there the Wi-Fi network is crossed out with a red cross. I click on it and see the status “No connections available”.

I went straight to Control Panel\Network and Internet\Network Connections Adapter. The wireless network connection is enabled, but again there are no connections available. I checked that my Wi-Fi network is displayed on my phone and tablet. Strange situation. Everything is turned on, everything seems to be working, but Windows 7 doesn’t want to see the wireless network. Moreover, Wi-Fi disappeared suddenly. When I turned off the computer, everything worked.

I think I’ll run diagnostics and see if it helps. Launched:

The system looked for something there and gave me a window asking “Enable the ability to use a wireless network.” I agreed by selecting "Make this correction".

Oddly enough, Wi-Fi worked immediately. The laptop itself connected to the Wi-Fi network. All that remains is to close the diagnostic window.

That's it, the problem with "No connections available" is solved. It’s just not clear why at the end, the system diagnostics showed “Wireless communication is disabled,” and how would Windows fix this if the Wi-Fi adapter was turned on. Also, I like the status in the diagnostic window: "Search additional problems...":). There are already enough of them in Windows.

“No connections available”: check whether the WLAN auto-configuration service is enabled

If the WLAN auto-configuration service is disabled, then Windows simply will not be able to find Wi-Fi networks. That's why, wifi icon will be crossed out with a red cross, with the status “No connections available”.

Let's check. Open the Start menu, right-click Computer and select Manage.

In the new window, go to the Services tab, and find “WLAN AutoConfig Service” in the list. The status should be "Running" and the startup type should be "Automatic".

If this is not the case for you, then right-click on the service and select Run. Better yet, open properties, set the startup type there to automatic, and restart the computer.

In fact, this problem may appear due to various reasons, and diagnostics will not always help. But in my case, everything worked, one might say, without any action on my part. Otherwise, now I would start checking drivers and all that. Later I will try to write about other causes and solutions to the problem with the “No connections available” status in Windows 7. And also, before you run diagnostics and do anything, check whether you even have a Wi-Fi network nearby. After all, the connection status will be exactly the same if there is no wireless network nearby.

Windows 10 - all instructions for setting up the Internet and solving problems Setting up a router - instructions for different models and manufacturers Useful programs - for HotSpot settings, Wi-Fi, 3G/4G modems.

help-wifi.com

Setting up a wireless network in Windows 7

Setting up a local network in Windows 7

Testing Wi-Fi connection

Settings Wi-Fi security

Settings Wi-Fi routing

Wireless Network Design

call a technician?

On weekends and holidays
Work guarantees
and components
Highly qualified specialists

remont-comp-pomosh.ru

How to set up a wireless network in windows 7

Today, wireless networking is more popular than ever. Yes, this is not surprising, because it is incredibly convenient: you can use the Internet without being tied to, say, a cable. The main condition under which using a wireless network becomes possible is the availability of Wi-Fi coverage.

Settings

So, to begin with, I will note that there is a main computer and other computers on the network. In the first case, your PC acts as a conductor of a wireless network, and in the second, other computers use the main one to connect to Wi-Fi. There are also programs that make it easy to create an access point, for example, you can read how to set up connectify on windows 7. To set up a wireless windows network 7 of the host computer, you need to: turn on the wireless module, then go to “Start”, and then to “Computer”. Next, you should select “Properties”, where, on the left side, there is an active line “Advanced system settings”.

There you will see the “Computer Name” tab, where you should enter the name of your network (this could be, for example, your name). If you also want to change the computer name and workgroup name, then click the “Change” button under the description, click on it and rename everything to your taste. If you don’t need to do any of this, then after filling out the “Description” line, just click “OK”.

Instructions

To connect to a wireless network, you must activate and correctly configure the Wi-Fi adapter of your mobile computer. Open the Start menu and go to Computer properties. Find and open the Device Manager menu.

Expand the “Network adapters” submenu and find a device designed to work with the Wi-Fi channel. If this equipment disabled, then right-click on its name and select “Enable”. Make sure that next to the name Wi-Fi adapter No exclamation mark. This means that everything for this device is installed necessary drivers.

Sometimes for Wi-Fi activation adapter you need to press certain keys. Complete this action. Click on the local networks icon located in the system tray. In the drop-down menu, select the desired network and click the “Connect” button.

If the network is password protected, enter it in the window that appears and click Enter key. Wait until communication with the wireless access point is established.

If you need to connect to a network that operates in covert broadcast mode, then set its parameters yourself. Open Network and Sharing Center. Select the Manage Wireless Networks menu.

Click the Add button and select the Create a network profile manually option. Fill out the table provided. Specify exactly those parameters with which this moment the access point you need is working. Click "Next".

In the new window, click the “Connection” button and wait for the connection to the network equipment to be established. Check network activity. Try opening shared files or performing other operations on networked PCs.

Sources:

how to install a wireless network on a laptop

Creating your own wireless network is carried out using various devices. At home, as a rule, they use Wi-Fi router s. But sometimes it makes more sense to connect other types of equipment.

You will need

- Wi-Fi module;
- Internet access.

Instructions

If you already have a desktop computer connected to the Internet, use a Wi-Fi adapter to create a wireless network. Such equipment is divided into two types: external adapters, working via USB channel, and internal modules, connected to system board PC via PCI port.

Select the device type you need. Please note that to connect two or more mobile devices you will need an adapter that supports access point mode. A striking example of such a device is the Asus PCI-G31 Wi-Fi module.

Turn off the computer and connect the adapter to the PCI slot of the motherboard. Install the antenna into the existing adapter port. Turn on your PC and wait for the operating system to load.

When working on Windows XP, install drivers from special disk supplied with the module. When working with systems Windows Seven or Vista use Ralink Wireless Utility.

After installing the appropriate software, proceed to configure the operating parameters of the wireless communication module. Run the utility and open the Soft+AP (STA+AP) tab.

Change the settings of the future access point. In the SSID field, enter her name. Fill in the Authentication column. To do this, select an authentication mode and specify the key type.

Now enter the password required to secure your wireless network. When using WEP encryption, its length must be six characters, and for WPA (WPA2) it must be eight.

Fill in the Max numbers of peers field. Specify the number of mobile devices that will be simultaneously connected to the access point. Click the Apply button. Now right-click on the utility icon and select Soft+AP Mode.

After waiting for the new menu to load, specify active connection with the Internet to which they will have access mobile devices. Connect your laptops to the hotspot. Check that the connection is working properly.

Video on the topic

Sometimes, in order to appreciate all the benefits of the Internet, you need to use it not only while sitting at a desktop computer, but also in the next room or, for example, in the kitchen, and also use a laptop or PDA. All you need to do is create a wireless Wi-Fi network at home.

You will need

Wi-Fi router

Instructions

Turn on the computer, open any installed browser and in the address bar enter the IP address of the router. Most often, this is 192.168.1.1, although there may be other options. We find out what the address of our router is, as well as the login-password pair for accessing the settings, from its operating instructions.

Once on the settings page, we find the “Wireless Network” tab. The main settings are networks, authentication method (WPA is most often used) and WPA access key. We set the values we need and enter the access key - it will be the password for connecting other Wi-Fi to our wireless network. We also enter the identification string (SSID). It will appear as the name of our wireless network when other devices discover it.

Go to the “Internet connection” or “WAN” tab. We enter the login and password to access the Internet, as well as the connection settings: its type (PPTP, L2TP or others) and the corresponding IP address. It is better to find out these network settings in advance from your Internet provider.

Confirm all settings by clicking “OK” or “Apply” and reboot the router.
To check the functionality of the wireless network, we try to connect to it using a PDA/smartphone. Through a search, we find our network by SSID. When connected, the devices will ask for an access key. Enter the appropriate WPA key. Your home wireless network is installed!

With the widespread use of laptops, the era of network cables began to gradually end. Now many people cannot imagine their life without such banal things as wi-fi. Create one net It’s not difficult at all, and there are more than enough options.

You will need

1 computer
1 wifi adapter
Minimum 1 laptop

Instructions

We will show how to create a wireless network using the Asus PCI-G31 wifi adapter as an example. Working with it is easy and pleasant, and will take no more than ten minutes. Install the adapter into the PCI slot in your, and turn on the latter. Further, the situation will develop differently for the Windows XP + Vista and Windows 7 operating systems.

Windows XP. Everything is simple here. After installing the software, launch the program displayed in the tray. Select Config and go to the Soft AP tab. Place it next to Soft AP_mode. If you want wireless network users to have access to, then in the Internet column select the required net. Now go to Config – Access Control, and one by one enter the MAC addresses of the network adapters of the laptops you need. Note: The MAC address is found like this: win+r – cmd – ipconfig /all.

Unfortunately, adequately working software for Windows 7 has not yet been written. But there is a way out of this situation due to the fact that Ralink wifi adapters are made on the same chip as Asus. Download and install Ralink Wireless Utility. Note: when working in Windows 7, original software is not required - only drivers are needed. Right-click on the tray icon and select Switch to Soft AP mode. Launch the program and go to the AR tab. Here you can find your access point name (SSID) and password (Key Material). As usual, if you plan to distribute the Internet to other devices, then in the properties of your device, allow access to the wireless network that uses this adapter. There is no need to configure anything else, because... Access to the network is provided with a password entry.

Helpful advice

For Windows Vista, you should try the native software, and if that fails, install Ralink.

Sources:

wireless internet installation

Laptops are gaining more and more recognition compared to traditional desktop computers. This is mainly due to their mobility, compactness and ease of use. It is not surprising that when using a laptop, many try to abandon wired Internet. The cable ties the laptop to a specific place, thereby removing all its advantages. But there are many ways to create wireless net for a laptop at home.

You will need

Wi-Fi router
network cable (usually provided with the router).

Instructions

Sources:

how to make a wireless mouse

Wi-Fi adapters are devices that allow you to connect desktop computers to wireless access points. But they can also be used for other purposes, for example, to create a local network between a PC and a laptop.

You will need

- Wi-Fi adapter.

Instructions

First, select a Wi-Fi adapter for your desktop computer. These devices come in two main types: internal and external. The first type of adapters connects to PCI slot, located on motherboard computer, and the second - to USB connector. Purchase a suitable Wi-Fi adapter.

Connect the purchased device to the required connector. If you are connecting a PCI adapter, be sure to turn off your computer first. The adapter must come with a disc containing drivers and software for managing the device. Install this program.

Launch the installed application. Configure the Wi-Fi adapter settings if required. They are usually automatically selected when you connect to any wireless network. To connect to this adapter, set up your local network.

Open Network and Sharing Center. Select the Manage Wireless Networks menu. In the new window, click the “Add” button to start the process of creating a new network. Select the computer-to-computer network type.

In the menu that opens, specify the name of the future network, select the security type for it, and enter the password. If you want to use this network in the future, check the box next to “Save network settings”. Click "Next". After the message about successful creation network, click the “Done” button.

Enter set password to gain access to the network. To view the IP address of each device, right-click on the connection icon and select “Status”. Click the "Details" button in the menu that appears.

Video on the topic

note

The described method for creating a wireless network is applicable to Windows Seven OS.

Technologies such as infrared and Bluetooth are becoming less and less popular because they are being replaced by modern wireless networks. Wi-Fi is being used more and more as cities have a large number of free points.

Instructions

To wireless compound a specific key combination. Usually this is Fn + F2. To connect to the Internet you need to look for specific access points. On a personal computer, you can connect to Wi-Fi only if you have a special removable device. Ask a peripherals consultant about Wi-Fi devices for personal computer. Prices may vary, but mainly depend on the signal reception radius.

Once the device is purchased, unpack it and insert it into the USB drive. If you have USB 3.0 technology on your computer, then insert Wi-Fi there. The computer system will automatically detect the new device. The kit also includes a CD with drivers. Insert it into the drive and install all the drivers. Next, restart your computer so that all saves in the system are recorded. After the reboot, an icon will appear in the tray that will show Wi-Fi status.

Go to the “Control Panel” item. This can be done using the “My Computer” shortcut. Next, click the shortcut called “Wireless Networks”. Here are all the settings that relate to Wi-Fi technologies, as well as Bluetooth. Click the "Turn on Wi-Fi" button.

After that wireless technology will be active, but it is not yet possible to connect to the Internet, since you need to look for special access points that can be locked with passwords in order strangers were unable to penetrate the system and automatically connect to the connection. To do this, click the “Find new” button compound" System in automatic mode will begin scanning access points that are in action.

If no such systems are found, try scanning in another location. As soon as compound will be found, try to connect. As practice shows, some cafes and educational institutions use free points access that allows you to connect to the Internet. You can find a list of such establishments on the Internet using search engines.

Big number Modern Internet providers provide Internet access services via a wireless channel. This system It is especially convenient for those people who have several desktop and mobile computers at their disposal.

You will need

Wi-Fi module.

Instructions

To connect to any wireless access point, you need a properly working Wi-Fi module. This could be a device built into the laptop, a PCI adapter connected to the motherboard, or a USB device that works with network Wi-Fi. Choose the right equipment.

mode

To boot your computer safely mode, press F8 when starting the system. It is best to press the button several times at a frequency of about once per second - this will allow you not to miss the moment. A window will appear with options for starting the operating system. First try the "Download latest" option. successful configuration", in many cases this option resolves all problems.

If the computer refuses to boot in this option, you should try safe mode. The selection lines are located at the top of the window. You will have three options: Safe Mode, Safe Mode with Command Line Support, and Safe Mode with Networking. Choose the first one: in this case you will get the Windows interface that you are quite familiar with. Only the screen will be black, in its corners you will see the inscription “Safe Mode”.

When you select the "Safe Mode with Command Prompt" option, the console (command prompt) will be launched instead of Windows Explorer. This mode can also be useful, but you need to know how to work with the command line. If you have a console open, type HELP and press Enter to display a list of commands.

How can I use Safe Mode? If you can only boot into it, try running the rollback procedure to an earlier state of the computer: “Start” - “All Programs” - “Accessories” - “System Tools” - “System Restore”. If the rollback is successful, after rebooting you will have a restored system. Restoration is possible if restore points were previously created on the computer. When working in the console, you can start recovery with the command: %systemroot%system32
estore
strui.exe.

Safe mode is useful if several people work on the computer, each of them has their own accounts, and one of the workers needs to log in. In a safe mode you will be logged in as an administrator and can easily change your forgotten password. To do this, open the “Control Panel”, find the “User Accounts” section, select the desired one account and change your password.

One of the advantages of Asus laptops is the presence of Bluetooth functionality. However, it may not always be available. Even when installed by default on the computer. Knowing the nuances will help you avoid many troubles.

But this is only at first glance. To enable Bluetooth, you will need drivers, especially if the operating system was installed yourself and not by the manufacturer.

Drivers to enable Bluetooth

As mentioned above, in order to activate the Bluetooth connection, you need to download drivers. But if the manufacturer relied on a 64-bit system, then there may not be drivers for an 86-bit system.

Windows OS has two bit depths: 32-bit and 64-bit. And 86-bit is the second designation of 32-bit.

Therefore, you will not be able to turn on Bluetooth. In this case, you need to reinstall the operating system from 86-bit to 64-bit.

In order to check the bit depth in the operating system, you need to right-click on the “My Computer” shortcut. In the window that opens, select “Properties”.

If everything is in order here, then you need to start looking Asus drivers. They are all on the manufacturer's official website, sorted by model. It is not advisable to download from other sites, as the file itself may contain viruses.

If your personal (computer) is running Windows 7 or Windows 8, then you can install drivers for Bluetooth from Windows XP or Windows Vista on them. In some cases, a driver disc may be sold together with a laptop. Check it out: maybe you have it somewhere too.

Even in cases where the operating system was originally installed by the manufacturer, there may not be drivers for Bluetooth. After you download and install them, try connecting.

Turning on Bluetooth

Most often for activation Bluetooth connections You need to press the fn and f2 keys together. Depending on the modification of the laptop, the second button may be different. Usually it shows an antenna. To enable Bluetooth faster, there is a special button on the side of the case.

If you cannot connect using the above methods, you can try next algorithm actions:
1. Click Start.
2. Select All Programs.
3. Open the Standard folder.
4. Find the Bluetooth icon.

You can download the program yourself to turn on Bluetooth if none of the above methods worked.

Hard to imagine to modern man your life without the Internet, and even wireless. But it happens that the laptop does not see the wifi network, why this happens and what to do then, let’s look into it in detail!

Why the laptop does not see the wifi network: possible problems and their solutions

Let's go from the most likely to the most difficult - by elimination. Let's get started.

The most common

So why doesn’t the laptop see the wifi network? This could happen due to the fact that the wired Internet basically absent!

Let's make sure that there is a presence in the coverage area wireless Internet To do this, using other devices: tablet, smartphone, laptop or PC, let’s check whether they see wifi on the laptop. If yes, we follow further, if not, then he does not see wifi.
We found out that there is Internet, but the laptop does not see the Wi-Fi network, why - it means that something is wrong with our device, as a rule, and there are extremely banal solutions.
See if the adapter is turned on; as a rule, the indicator lights up on the keyboard:

the procedure helps in most cases, otherwise we are looking for another reason why the laptop does not see wifi.

The driver is an important component!

We urge you not to forget that the driver is the link between the hardware and the OS. Without this talented negotiator, everything works quite crookedly or does not work at all - this may be the answer to the question - why the computer does not see the Wi-Fi network. Regardless of whether it is a laptop or a desktop PC, whether the adapter is connected externally or internally, the solution is common.

If Windows versions 10, we follow:

We see that the drivers are not installed:

go to the manufacturer and download the appropriate drivers.
install → restart system
check, if it works, we’ll finish here, otherwise we’ll look for other reasons.

Let's adapt - adaptation!

There is such a word as adapter - this is the main opportunist in the name of the advent of the Internet, and if it is disabled, nothing will be visible!

Let's check if it is enabled:

Sees everything, but not what is needed!

Why doesn't the computer see my Wi-Fi network, but catches everyone else - and this happens. Here you already need to understand the router settings. Let's take a closer look at Asus models, and for the rest we will write them in commands. First, connect to another available Internet - for example, you can distribute it from your phone.

Now, regarding TP-Link equipment:

What's in a name…?

One involuntarily recalls the words of the classic A.S. Pushkin. Do not think that this is a joke, sometimes there is an SSID conflict, your computer does not see Wi-Fi, but everyone else does. And believe it or not, it turns out that his change and Voila are enough!

We change it using the example of an Asus router with screenshots:

If TP-Link:

Nuances!

Each laptop brand has its own utilities responsible for function keys, let’s look at one position in detail, so what to do if Lenovo laptop Doesn't see WiFi. It's about about Energy Management software.

If your desktop computer or laptop is connected to the Internet, then an unpleasant moment may come when you lose access to the network, and the network connections icon in the notification area will be crossed out with a red cross. When you hover your cursor over it, a message will appear explaining everything. "No connections available". This happens especially often when using a Wi-Fi adapter. Let's find out how to solve similar problem, if you are using a PC with Windows 7.

There are quite a few reasons that can cause the problem we are studying:

Real lack of available networks;
Damage to the Wi-Fi adapter, router or modem;
PC hardware failure (for example, network card failure);
Software glitch;
Lack of current drivers;
Damage to the operating system;
Virus.

We will not talk in detail about such a banal reason as the real lack of accessible networks. This can only be “cured” by returning to the Internet accessibility zone or changing the connection method to one that is valid in the given area. There is also no point in talking too much about hardware faults. They can be eliminated either by a hardware repairman or by replacing a failed part or equipment (Wi-Fi adapter, network card, router, modem, etc.). But we’ll talk in detail about the other reasons and ways to eliminate them.

Method 1: Standard diagnostics

First of all, if you experience the error discussed in this article, follow these simple steps:

Unplug the Wi-Fi adapter from the computer connector and then connect it again;
Reboot the router (it is better to do this by completely disconnecting it from the power supply, that is, you need to remove the plug from the socket);
Make sure you have your Wi-Fi hardware switch turned on if you are using a laptop. It turns on for different laptop models different ways: either using a special switch on the case, or using a specific key combination (for example, Fn+F2).

If none of the above helped, then it makes sense to carry out a standard diagnostic procedure.

Unfortunately, this method helps in a fairly limited number of cases. Therefore, if you are unable to resolve the problem when using it, then proceed to the following methods, which are described below.

Method 2: Enable Network Connection

It is likely that the cause of the error may be a disconnected connection in the network connections section "Control Panels". Then you need to activate the corresponding object.

Click "Start" and open "Control Panel".

Go to section "Network and Internet".

Go to "Network Control Center...".

In the left part of the window that appears, click on the inscription "Change adapter settings".

The window that appears shows all the network connections configured on this computer. Find an item that is relevant to you and look at its status. If set to "Disabled", then you need to activate the connection. Right-click on the object ( RMB) and select "Turn on".

After activating the connection, the problem described in this article will most likely be resolved.

Method 3: Removing the adapter from Device Manager

If you connect to the Internet via a Wi-Fi adapter, then one of the ways to solve the problem is to disable it in "Device Manager", and then reactivation.

Go to "Control Panel" by the method that was considered in the description Method 2, and then open the section "System and safety".

Click on the one posted in the group "System" element "Device Manager".

Will start "Device Manager". In the list of equipment types that opens, click on "Network adapters".

In the drop-down list, find the name of the equipment that you use to connect to the Internet. Click on it RMB. Carefully examine the context menu that appears. If it contains a clause "Engage", click on it. This will be enough and that's it further actions, described in this method, you will not need to perform. The device was simply turned off, and now you have turned it on.

If the specified item is not present, then this means that the device is likely to malfunction. Therefore, it needs to be temporarily deactivated and then turned on. Click in the context menu "Delete".

A dialog box will open warning you that the device will now be removed from the system. Confirm your actions by clicking "OK".

The procedure for deleting the selected device will be performed.

After that in horizontal menu click "Action", and then from the list that opens, click "Update configuration...".

A search will be made for devices connected using the technology "Plug and Play". The network adapter will be reconnected, and its drivers will be reinstalled.

Next, restart your PC. Perhaps after this the connection availability error will disappear.

Method 4: Reinstalling drivers

One of the reasons for the error we are studying is that incorrect or outdated network adapter drivers are installed in the system. Most often it occurs when connecting the device for the first time or after reinstalling the OS. Then the drivers should be replaced with a current analogue. It is advisable to use exactly those copies that were supplied on a CD or other media along with the device itself. If you do not have such media, you can download desired object from the official website of the adapter manufacturer. Using similar software from other sources does not guarantee a solution to the problem.

Go to "Device Manager", using the same algorithm of actions as in the previous method. Open the section again "Network adapters" and click RMB by name desired device. In the list that appears, select "Update drivers...".

Next, the shell for selecting the update method is activated. Select an option “Search for drivers...”.

In the window that opens, you must specify the media and directory where the drivers will be installed. To do this, click "Review…".

The shell opens "Browse folders". Here you need to indicate the folder or media (for example, CD/DVD) where the drivers supplied with the device or pre-downloaded from the official website are located. After selecting a directory, click "OK".

After the directory address is displayed in the driver search window, you can proceed to install them by clicking the button "Further", but before doing this, make sure that opposite the parameter "Including subfolders" the checkbox has been checked.

The necessary drivers will be installed, and the problem with the lack of Internet connection will probably disappear.

But what to do if for some reason you do not have the driver media that came with the device, and the company’s official website does not work? In this case there is additional features install the necessary drivers, although they are recommended to be used only in the most extreme cases, since they do not 100% guarantee interconnection between the OS and the adapter. You can use the following options:

If your Internet does not start at all, then you will have to search and download from another device.

Method 5: Enable the service

If you use Wi-Fi to connect to the Internet, the problem we are investigating may occur due to a service outage "WLAN Auto Configuration". Then it needs to be activated.

Go to the section "Control Panels" entitled "System and safety". This is discussed in the description Method 3. Click on the title "Administration".

In the list of system tools that opens, select "Services".

"Service Manager" can be activated in another way. To do this, dial Win+R and enter in the displayed area:

Then apply button click "OK".

"Service Manager" will be open. To quickly find an element "WLAN AutoConfig Service", arrange all services in alphabetical order by clicking on the column title "Name".

Find the name required service. If the status is not set opposite its name "Works", then in this case it is necessary to activate. Double-click on her name with the left mouse button.

The service properties window opens. If in the field "Startup type" value set "Disabled", then in this case click on it.

A drop-down list will open where you need to select "Automatically". Then click "Apply" And "OK".

After returning to the main interface "Service Manager" select the name "WLAN AutoConfig Service", and on the left side of the shell click "Run".

The service will be activated.

After this, the status will be displayed opposite its name "Works" and the problem with lack of connections will be solved.

Method 6: Checking system files

If none of the above methods did not help, that is, it is likely that the integrity of the system files was violated. In this case, it is necessary to perform an appropriate check and then restore if problems are found.

Click "Start" and select "All programs".

Open the folder "Standard".

Find the element with the name "Command line". Click on it RMB. From the list of action options that appears, choose to run as administrator.

Opens "Command line". Type into its interface:
Then click Enter.

Integrity Scan Procedure system elements will be launched. Information about the dynamics of its passage will be displayed right there in the window. "Command line" in percentage terms. While this process is running, you should not close the current window, but you can minimize it. If violations in the structure are detected, a procedure for restoring missing or damaged files will be automatically performed.

If, after completing the scanning procedure, a message appears informing you that recovery is impossible, repeat the entire process again, but this time you will need to.

Method 7: Eliminate viruses

The cause of the problem of lack of available networks may be a virus infection of the computer. Some malware they specifically disable access to the Internet so that the user cannot use external help to remove them, while others simply arbitrarily “kill” or modify system files, which ultimately leads to the same result.

To remove malicious code there is no point in using standard antivirus, since he has already missed the threat, and, therefore, will not react to the virus, and may also be infected by this time. Therefore, we recommend using specialized anti-virus utilities that do not require installation. One of the best programs in this class is. It is best to check from another device or when starting from LiveCD/USB. This is the only way to ensure the maximum likelihood of detecting a threat.

If the antivirus utility detects malicious code, then in this case follow the tips that will be displayed in its interface. There is a possibility that the virus has already damaged system files. Then, after eliminating it, it is necessary to carry out the appropriate check discussed in the description Method 6.

As you can see, the source of the problem with the availability of connections, and therefore with the performance of the Internet, can be a lot of different factors. They can be both external (real lack of network) and internal (various failures), caused by both the software and hardware components of the system. Of course, before fixing a problem, it is recommended to establish its exact root cause, but, unfortunately, this is not always possible. In this case, simply use the methods described in this article, checking each time whether the malfunction is eliminated or not.

Windows 7 has many ways to create and configure a wireless network connection, called wireless profiles:

The network connections icon in the notification area is the primary way users connect to available wireless networks.
Set up a connection or network dialog box - method manual creation users of wireless network profiles.
The Manage Wireless Networks dialog box is another way to manually configure wireless networks and specify their exact parameters.
Group Policies - Network administrators can use Group Policy settings in the environment Active Directory Domain Services (AD DS) for centralized configuration and automatic deployment of wireless network settings on computers that are members of a domain. (See the article Settings group policy wireless communications in Windows Vista, in the "Cable Guy" column for April 2007)
Command Line - Network administrators can use the netsh wlan context of the Netsh.exe utility to manually configure wireless networks and their settings. There are Netsh commands to export existing wireless network profiles to an XML file and then import the wireless network profile from that file to another computer.

The following sections detail how to connect to a wireless network using the network connections icon in the notification area and the Set up a connection or network dialog box in Windows 7, how to manage wireless networks, and how to connect to non-broadcast wireless networks.

Using the network connections icon in the notification area

To connect to an available wireless network, click the network connections icon in the desktop notification area. The panel that opens will display a list of detected wireless networks, and on computers that are members of the domain, the names of wireless networks configured using Group Policy (Fig. 1)

Rice. 1 List of available networks

From this panel, you can connect to a wireless network from the list by double-clicking, or by selecting the network and then clicking the Connect icon, or by right-clicking the network name and selecting Connect from the context menu.

To view information about wireless networks in the list, hover your mouse over the network name. You will see the wireless network name, signal strength, security type, connection type (802.11b/g/n) and network ID (SSID). The status of the connected network and its properties or the network configured using Group Policy can be seen by selecting the display wireless network properties command in the context menu (Fig. 2).

To refresh the list of wireless networks, click the up or down arrow in the upper right corner of the panel. To disconnect from a wireless network, right-click the network icon and select Disconnect.

Rice. 2 Wireless network connection status dialog box.

You can open this dialog box in Windows 7 (Fig. 3) by selecting the “Set Up a New Connection or Network” link in the “Network and Sharing Center” window.

Rice. 3 Dialog box for setting up a connection or network.

To manually create a wireless network profile, select Manually connect to a wireless network, and then click Next. You should see what is shown in Figure 4.

Rice. 4 Page for entering information about the wireless network to be added.

Enter information about the wireless network you are adding:

Network name – enter the name of the wireless network;

Security type—Select the method used to authenticate your wireless network connection from the following options:

No authentication (Open) – open system authentication without encryption;
WEP – open authentication system using the Wired Equivalent Privacy (WEP) protocol;
WPA2 - Personal Access Wi-Fi protocol Protected Access 2 (WPA2) with a shared key (also known as a passphrase);
WPA – personal access via Wi-Fi Protected Access (WPA) with a shared key;
WPA2 – enterprise access via WPA protocol 2 with IEEE 802.1X authentication;
WPA – enterprise access via WPA protocol with authentication according to the IEEE 802.1X standard;
802.1x – IEEE 802.1X authentication with WEP (also known as dynamic WEP).

The choice depends on the capabilities of the wireless adapter known to Windows. If an authentication type does not appear in the list, you need to check whether your wireless adapter supports this type and is it installed compatible with Windows 7 latest version drivers.

Shared key authentication is not listed. Microsoft strongly discourages its use because it provides low level wireless network security. To set up shared key authentication, select "No Authentication" in this panel (Open), and then select "Shared" from the "Security" tab of the wireless network properties (as described later in this article).

Encryption type - Select the method used to encrypt data when transmitted over the wireless network. The choice depends on the selected security type.

If you select the security type "No Authentication" (Open), nothing will be selected;
when selecting the WEP security type, the security type will be selected WEP encryption;
when selecting 802.1x security type, WEP encryption type will be selected;
When you select the security type "WPA2-Personal", "WPA2-Enterprise", "WPA-Personal" or "WPA-Enterprise", you can select the encryption type - AES or TKIP.

As before, the list of encryption options depends on the capabilities of the wireless network adapter used, registered in Windows.

Security key ( Security Key) - Enter the WEP key (if the security type is WEP), the WPA shared key (if the security type is selected "WPA-Personal"), or the WPA2 shared key (if the security type is selected "WPA2-Personal"). For WPA2-Enterprise, WPA-Enterprise, and 802.1x security types, Windows 7 automatically detects the security key when performing 802.1X authentication.
Hide characters - Select whether you want to view the entered security key values.
Start this connection automatically - Specify whether Windows 7 will automatically connect to this wireless network. If you clear this check box, you must manually connect to a wireless network from the list of available networks displayed when you click the network notification area icon.
Connect even if the network is not broadcasting - Determine whether Windows should try to connect even if the wireless network does not announce its name. This will force Windows to send a probe frame to discover the wireless network. These probe requests can be used by attackers to determine the name of the non-broadcast network.

Rice. 5 Successfully added page.

You can select Change connection settings to access the wireless network properties page, as described later in this article, or click the Close button.

So, let's say you have a desktop computer at home with a permanent connection to the Internet, and a laptop that you would like to connect to a local network with the desktop computer, and also provide shared access to the Internet. Today, there are several solutions to this problem, but not all of them can be called simple and accessible, especially for users who do not have special network knowledge.

In our opinion, the simplest and most affordable way is to use two Wi-Fi adapters (the so-called Ad-Hoc or “point-to-point” connection), operating according to the 802.11b standard and providing an exchange speed of 11 Mbit / s, which is quite enough for normal work.

For our experiments we used USB controller WNC-0101 USB and built-in MaxSelect Mission Hammer Wide, Mini - PCI controller Realtek RTL 8180 Wireless LAN.

Next, we select which connections are used to connect to other computers on the network. Please note that you can combine wired and wireless connections here. In our case, we selected only “Wireless Connection 3”, which is based on the LevelOne WNC-0101 USB controller.

In the next two windows, you enter a computer name and description (optional), as well as a workgroup name.

Please take into account that the computers on your local network must belong to the same working group, otherwise you won't be able to see them online.

Finally, the last window allows you to enable or disable file and printer sharing.

After clicking the “Next” button, the wizard will begin configuring the IP connection parameters, as well as sharing and security. If you did everything correctly, a final screen will open, in which you will be asked to save the settings or simply complete the wizard, which we will happily do.

After setup, you will notice some changes in the network connection settings.

So, in the properties of “Local Area Network Connections” in the “Advanced” tab, all the checkboxes will be checked, and connections for home network.

And in the properties of the TCP / IP protocol of “Wireless Connection 3” a fixed IP address and subnet mask will be set.

Now you can proceed to launch the wizard on your laptop. Here everything happens noticeably faster and you only need to install the second type of connection. The master will do the rest for you.

That’s it, the setup process can be considered complete, and you, as the full owner of your home wireless network, can run any Internet applications, including games. In addition, you can easily work with both disks on another computer and printers, providing wireless printing from a laptop located in another room.

A few words about the speed and range of the wireless network...

As we said above, for our first wireless network we used controllers operating according to the 802.11b standard with maximum speed exchange 11 Mbit/s. Of course, in today's times this is not a lot, and against the background of modern controllers operating using the 802.11 g and 802.11 Super G protocol, providing exchange speeds of 54 Mbit / s and 108 Mbit / s, it does not look very good. However, for the first experience, this solution is sufficient, allowing you to achieve quite good capabilities without having to deal with some of the specific features of a high-speed connection, which we will still have to tinker with in the future.

As for the actual exchange speed, to study it we used the ICB 2000 program, which allows you to measure network traffic. Moreover, we are not interested in the speed of artificially generated traffic, but in the speed of actual transfer of files and other information.

So, first we will look at what our wireless network is capable of when copying a large file from a desktop computer to a laptop while simultaneously watching on-line a movie recorded on the desktop computer on the laptop. In this mode, we load the wireless channel as much as possible.

As you can see, the maximum wireless channel throughput in this mode is on average 4636 Kb/s. It is very important to note here that we did not observe any slowdowns when watching a movie, which allows us to conclude that in small home networks, the capabilities of 802.11b networks are quite sufficient.

If you start copying to reverse direction, i.e. in Download mode for a desktop computer, the maximum throughput of our channel will be slightly higher - 4984 Kb/s with a peak value of 5305 Kb/s.

If, while copying a file from a desktop computer to a laptop, we run the same task, but in the opposite direction, the speed will drop slightly. Moreover, the speed in Upload mode does not drop significantly, but in Download mode we observe a noticeable decrease in performance.

And finally, let's look at what happens when we run any network application that generates a balanced load on the link. Here we simply started watching a movie recorded on a desktop computer on a laptop.

As you can see, in this mode the load on the channel is so insignificant that it allows you to run network viewing on a couple more computers. This is what explains the lack of slowdowns when watching a movie while copying a file in parallel. As for the range, in such a network it is not very large, and depends on the configuration of the room. In fact, in ordinary apartment or a small office everything will work fine.

How many computers can be connected to such a wireless network?

A pleasant surprise for many of you will be that a simple Ad-Hoc network can include several computers at once, which can be easily connected to each other and provide easy access to the Internet. However, remember that an increase in the number of computers working simultaneously on the network significantly reduces network performance, which is due to the need to transfer all data through the desktop computer, which in our case is the gateway.

Conclusion…

So, we hope that the above detailed recommendations will simplify your first experience of creating a wireless home network. Despite the apparent complexity of the process, everything turned out to be more than simple. However, we cannot claim that the presented solution is universal and will be equally correct for all cases. Experience shows that almost every installation of a wireless network with new equipment raises some questions, especially for users who do not have special training. The main thing is that you must clearly understand and imagine the sequence of actions that should lead to successful launch wireless network. In the next article, we will introduce you to equipment that can significantly increase the performance of your home network.

You will need

Connected Wi-Fi router, working computer with Windows operating system, client for working in a wireless network

Instructions

Go to the Start menu. Select “Settings” and in them - “ Network connections". Right-click on the “Network Neighborhood” icon to bring up the drop-down menu and select “Properties”.

Return to the Network Connections window. Right-click on the “Wireless Network Connection” icon and select “Properties” from the drop-down menu.

In the tab that opens, select “General” and make sure that the “When connected, display an icon in the notification area” and “Notify when there is limited or no connection” buttons are checked.

Go to the "Wireless Networks" tab in the same window.

If the “Wireless Networks” tab in the “Wireless Network Connection” - “Properties” window is missing for some reason, click OK.
Go to the Start menu, select Settings and go to Control Panel.

In the new “Control Panel” window, double-click on the “Administration” and “Services” icons.

Make sure that the Wireless Setup service is running. Otherwise, double-click the “Wireless Settings” icon, and in the new properties window, click the “Start” button and OK.
Return to the Network Connections window. Right-click on the “Wireless Network Connection” icon to open the drop-down menu and go to “Properties”.

On the Wireless Networks tab, make sure the Use Windows to set up your network checkbox is checked.

Click the Add button under Preferred Networks. Go to the "Connections" tab. Enter MIAN in the Network Name field. Make sure the “Connect even if the network is not broadcasting” button is checked. Select WPA from the Authentication section of the menu. Select TKIP from the drop-down menu on the Data Encryption tab. Make sure that the checkbox is checked on the “This is a direct computer-to-computer connection” button and unchecked on the “Access points are not used” button.

Go to the Authentication tab in the Wireless Properties window. Select "Protected EAP" from the drop-down menu in the "EAP Type" section. Uncheck the "Authenticate as a computer when computer information is available" button. Make sure that the checkbox next to “Authenticate as a guest when no computer or user information is available” is unchecked. Click the Properties button.

Uncheck the Verify Server Certificate button in the EAP Secure Properties window. Check if “Secured password” (EAPMSCHAP v2) is in the “Selecting an authentication method” section. Select the checkbox next to the “Enable Fast Reconnection” button.

Click the "Configure" button. Uncheck the "Automatically use Windows login and password" button in the EAPMSCHAP v2 Properties window. After that, click OK.

Click OK on the EAP Protected Properties window. Go to the "Connection" tab in the "Wireless Network Properties" drop-down window. Make sure the "Connect if a network is within range" button is checked and click OK.

Click OK in the Wireless Network Connection Properties window.

IN modern world Most people are gradually abandoning cables and other inconveniences of wired Internet. And this is not surprising. Why tie yourself and your laptop to a specific place when you have the opportunity to walk with it throughout the apartment and even outside it? Almost all providers offer to connect to wireless WiFi service Internet. But there are ways to bypass the system and save a lot of money. We will tell you how to set up wireless Internet at home. Using the example of the Beeline provider and the D-Link dir 615 router.

You will need

WiFi router
Laptop or PC with WiFi adapter
LAN cable

Instructions

Router installation.
The most optimal location of this device is in the center of the apartment. This will allow you to achieve best signal in any corner of it. After installing the router, connect it or your laptop with the network cable included in the kit, inserting one end into the network card and the other into any LAN port. Go to the router menu by typing //192.168.0.1 in any browser using the username admin. Go to Setup – Internet Connection Setup Wizard. Click next 2 times, and in the third step select username (Russia L2TP).

Next, you should enter your Internet login and password, leave the DNS Setting as standard, and in the L2TP Server IP Address item, enter tp.corbina.net. Click connect. After this, you will need to reboot the router by disconnecting power from it for at least 15 seconds. This action should be performed if it does not occur automatically.

WiFi setup.
Go to Setup – Wireless Settings – Wireless Network Setup Wizard. Now enter the name of your future network and its password in sequence. After clicking Save buttons, the wireless network will be ready for use. If you cannot access the Internet from your laptop, reboot the router.

Video on the topic

note

Install complex passwords, containing letters, numbers and symbols to avoid hacking your router.

Try not to reset your router to factory settings after setup.
If the device does not work correctly, update the firmware downloaded from the manufacturer’s website.

Sources:

how to connect wifi internet

For all its convenience, wireless compound is the most vulnerable to unauthorized connection. However, it can be reliably protected using standard router tools with certain settings.

Instructions

Connect your Wi-Fi router to your computer using an Ethernet cable. In this case, the indicator on the router should light up, signaling a connection via the local network. After that, launch any browser to go to the router settings. To do this, enter the address 192.168.1.1 into the address bar of your browser. If the connection is successful, a dialog box should appear in the browser in which you must enter your username and password to log in. By default, the login and password are “admin” “admin”. In the router settings window, go to the Security tab.

Wireless is most reliable compound protected by a password. To set a password, first select the type of encryption that the router will use. For domestic purposes, it is recommended to use WPA encryption. It is better to use a random set of letters, numbers and symbols as a password, which will be difficult to crack. Do not use your phone number, last name, and date of birth as a password; this type of data is quite easy to hack or select.
Enter a password for all devices that you plan to connect to your home Wi-Fi, and to avoid inconvenience, make sure they connect automatically.

In addition to a password, a wireless network can be protected by limiting the number of network clients, that is, if only two computers continuously use Wi-Fi in your home, you can set a limit of two clients, and no one else will be able to connect to this network. This can also be done in the router settings. However, if one of the devices disconnects from the network for some reason, then anyone can connect to the “free slot”. Therefore, this method is not as effective as a password.

Video on the topic

Helpful advice

Use both methods to secure your wireless network to best security. Set a password and limit the number of clients based on the number of Wi-Fi devices in your home.

Technologies such as infrared and Bluetooth are becoming less and less popular because they are being replaced by modern wireless networks. Wi-Fi is being used more and more, as there are a large number of free hotspots in cities.

Instructions

Wireless on laptop compound activated by a specific key combination. Usually this is Fn + F2. To connect to the Internet you need to look for specific access points. On a personal computer, you can connect to Wi-Fi only if you have a special removable device. Ask a peripherals consultant about Wi-Fi devices for a personal computer. Prices may vary, but mainly depend on the signal reception radius.

Go to the “Control Panel” item. This can be done using the “My Computer” shortcut. Next, click the shortcut called “Wireless Networks”. Here are all the settings that relate to W-Fi technologies, as well as Bluetooth. Click the "Turn on Wi-Fi" button.

You will need

Wi-Fi adapter.

Instructions

To connect a desktop computer to an access point, you must have a special device - Wi-Fi adapter. Select the appropriate module. They come in two types: internal and external adapters.

Check the types of radio signals your Wi-Fi router produces. The most common channels you can find are 802.11 b, g and n. Based on the information received, select the appropriate Wi-Fi adapter.

Connect the wireless module to your computer. Turn on your PC and wait for the operating system to load. Install the drivers necessary for the correct functioning of the Wi-Fi adapter. Best to use original disc, supplied with the device.

Pay special attention to the “Encryption Type” field. Select TKIP or AES. Check the box next to “Start this connection automatically.”

If your access point is configured to hide its name, enable the “Connect even if the network is not broadcasting” option. Click "Next". Select “Done” and wait for the connection to the access point to be established.

Check that your wireless connection is working properly. It is worth noting that some PCs may not connect to a wireless access point if they are connected to a Wi-Fi router via a patch cord.

Video on the topic

The benefits of a wireless network are undeniable. You are not tied to any specific workplace, and you can go to net from anywhere in your apartment, office, shopping center etc., where there is network coverage. It is convenient and can greatly simplify the work of any organization. Our instructions will help you set up a wireless network yourself.

Instructions

Find the “Network Neighborhood” icon on your desktop. If this icon is not on your desktop, go to the Start menu // Settings // Network Connections. Then right-click on the Network Neighborhood icon. A drop-down menu will appear in which you need to select “Properties.”

In the “Network connections” window that opens, right-click on the “Wireless network connection” icon. A drop-down menu will appear, select “Enable.”

Check the settings options on the General tab. The checkboxes should be on the buttons “When connected, display an icon in the notification area” and “Notify when there is limited or no connection.”

Find and select the “Wireless Networks” tab in the “Wireless Network Connection - “Properties” window
If you do not find such a tab there, then in the “Wireless Network Connection - Properties” window you need to click the “OK” button. In the “Start” menu, click the “Settings” button, then the “Control Panel” button.
In the “Control Panel” window that opens, double-click on the “Administration” icon, double-click on the “Services” icon. Make sure that the “Wireless Zero Configuration” (or “Wireless Configuration”) service is in the “Running” state. If not, then double-click on “Wireless Zero Configuration”, in the service properties window that appears, click the “Start” button and “OK”. In the “Network Connections” window, right-click the “Wireless Network Connection” icon, select “Properties.” Find the “Wireless Networks” tab and make sure that the “Use Windows to configure the network” button is checked.

In the “Preferred networks” field, click the “Add” button. On the “Connections” tab, in the “Network name (SSID)” field, you need to type MIAN (Attention! all letters must be capitalized). Check the box “Connect even if the network is not broadcasting.” In the “Authentication” section in the menu, you need to select WPA. On the Data Encryption tab, select TKIP from the menu that appears. Make sure that the “This is a direct computer-to-computer connection” button is checked, and that the “Access point is not used” button is unchecked.

In the Wireless Network Properties window, select the Authentication tab. In the “EAP Type” section in the menu that appears, select “Protected EAP (PEAP). Uncheck the "Authenticate as a computer when computer information is available" button. Make sure that the "Verify authenticity as

How to connect a wireless network?

Every apartment owner wants to have a wireless Wi-Fi network because it is convenient. Thanks to a Wi-Fi wireless network, you can connect to the Internet anywhere in the apartment from any device that is capable of this, and current technologies make such wireless Internet very fast and stable. However, not everyone knows how to connect a Wi-Fi wireless network independently and correctly in order to use it.

What you need to connect to Wi-Fi

To connect a wireless network, you need two things:

Any wired provider connected to you. It doesn’t matter which company the Internet will be from, it is important that there is a wire to connect to the router.
A router that will create a wireless Wi-Fi network. The router can be used for both optical Internet and ADSL line (telephone Internet).

Once you have all these things, you can start connecting to your wireless Wi-Fi network.

How to connect a wireless Wi-Fi network

Routers are available for both regular fiber optic and ADSL lines. The only difference will be in which socket the wire from the provider is connected to.

To connect, plug the router into a power outlet and connect the wire from the provider to it. If you need wired Internet to your computer, then connect a wire to the LAN port, which you then insert into the same port on the computer.

All that remains is to configure the router.

How to set up a wireless Wi-Fi network

You can configure the router either through a computer connected via wire to the router, or wirelessly Wi-Fi connection, which will work as soon as the router turns on. But both configuration methods have the same scheme:

We connect to a Wi-Fi wireless network or connect a wire to the computer from the router.
Open any browser and enter the IP address of the router, which is indicated in the documentation, in the address bar.
In the window that opens, enter the username and password specified in the documentation. Often the password and login is the word “admin”.
In the router settings menu, you need to enter the provider's data, which you can check on the website, by phone or in the documentation.
In the Wireless section, you must also change the name and password of the wireless network so that no one can use it and waste your traffic.
In addition, you can also change the login and password to enter the router settings, however, this is not necessary, because only the user who is connected to the wireless network can change the router settings data.
After configuration, save all changed parameters and reboot the router.

After the reboot, the changes will take effect and you can use the Wi-Fi network.

You can also read our articles.