I forgot the password on my Wi-Fi router. Recovering a lost Wi-Fi password. What to do if you forgot your control panel password

A password and username are one of the most effective and widespread methods of protecting against access by intruders, and simply uninvited guests. Passwords in routers are set to enter the settings menu, connect to a wireless Wi-Fi network, and to authenticate the user access to the Internet. But it often happens that the user has forgotten the router password, and in such cases there are several ways to restore it.

This article will discuss two options for password recovery:

Physical, that is, you will have to get up, go to the router, and carry out some manipulations with it;

Software, that is, only with the help specialized programs without touching the router.

Method one

The simplest and quick way– simply reset all settings to factory settings using a special button.

Reset button

As a rule, the button is designated “Reset”, is located on the back of the router, and is recessed into the case to avoid accidental pressing. Simply pressing and releasing the button is not enough; depending on the manufacturer and model of the device, you need to keep it pressed for up to 15 seconds, after which everything indicator lights will blink and the router will reboot itself with factory defaults presets. Next, open the documentation and look at the default password (mostly “admin”, and for the ZyXEL router “1234” or “12345”).

But it should be remembered that when in the specified way Absolutely all settings will be reset, and you will have to configure everything from scratch.

Method two

The second option on how to find out the password from the router is more likely not a recovery method, but a preventive tip - as a password, specify either the router’s mac address or its serial number, which are indicated on the label under the bottom of the router.

Label on the bottom of the router

Now you don’t even have to remember the password, just look at the label and you’re done.

The methods described above are physical in nature, without the participation of a computer. But you can recover the password without getting up from your computer chair and without touching the device itself using special utility programs. Let's look at two programs and a description of how to crack a router password using them.

Software recovery methods

Method three

The first program will require a configuration file, which had to be done from the router settings menu before the password was forgotten.

Saving a Settings Configuration File

Depending on the router, you need to look for the menu item “System”, “System Setup”, “Configuration”, “Recovery”, or something similar. On the page that opens there will be at least two buttons - create a file with the current configuration, and upload a file with the saved configuration to the router (restore settings, backup). But there may be additional items, such as “Factory settings”, etc.

By the way, saving backups is useful not only for the potential need to recover a password, but also for many other cases, for example, after a hardware failure, the settings may be lost, after which it will be necessary to perform the entire setup again. If there is a saved copy, then simply upload it to the router, and you’re done.

If, fortunately, we have a saved copy, then we will then need the “router passview” program.

Program window

The principle of operation is that all passwords and logins are stored in the saved router configuration file. But they are stored in encrypted form; simply opening the file in Notepad and viewing the information will not work. The Router Passview program analyzes this file, and with its help there is a very high chance of snatching the password, and this chance is much higher if the router model is common. The fact is that there are different models and brands of routers in the world. great amount, and it is simply impossible to support everyone. The list of supported models is given below:

List of supported router models

To start processing the configuration file, launch the program, click the “Open file” icon and specify the path to the file. You can also simply drag and drop the file into the program window.

The program is in English, but there are also excellent Russian translations, Freeware license, that is, free, program version 1.47.

http://soft.mydiv.net/win/files-RouterPassView.html

Russifiers are also located there.

Method four

The fourth, and last for today, way to try to recover your router password is the Router Password Kracker program.

Program window

This program, unlike the previous one, no longer requires a saved configuration file. For it to work, you only need a connection to the router (wired or via Wi-Fi, it doesn’t matter).

The principle of operation of “router password kracker” is to search for a password using a dictionary, in other words, brute force is performed, selecting a password by brute force. This method is very long, but in some cases there is no other way.

You can clearly see how the program works in the video lesson:

Almost every person has had a situation where they forgot their Wi-Fi password. There are several ways to restore access to wireless network. Depending on the situation, actions may vary.

If you have forgotten your wi-fi password, first try to find a service agreement from your provider; very often you can find the login/password for connecting to a wireless network there. Also look at reverse side router, in most cases you will find a sticker with a password.

If you still cannot find the paper with the password or it is not written on the back of the router, you will have to spend a little time and effort to recover it.

If there is a device connected to Wi-Fi

If the router is used at home, it will usually automatically connect to the wireless network, and a password will be required if a new device is connected. In this case, to restore access you will need a computer that was previously connected to wi-fi.

First you need to go to your network settings. To do this you can click right click mouse on the network icon, which is located in the lower right corner of the taskbar and select “Network and Sharing Center” from the drop-down list shared access" Or you can access these settings through the computer control panel.

In the window that opens, click on the image of your network, a small window will appear. Next, find the “Wireless Network Properties” button and switch to the “Security” tab.

The Wi-Fi password is written in the “Network Security Key” field, but it is hidden behind the dots. To see it, you need to check the box next to “Display input icons”.

Using a router

If there is not a single device already connected to the Internet via Wi-Fi and it is impossible to see the password, you can try to restore it using the router’s control panel. To do this, connect it to your computer using a cable (it comes with the router), then you need to open any Internet browser and type the combination of numbers in the address bar: 192.168.1.1.

By the way, this works on all devices that can connect to wireless networks and have a browser installed, so you can open the router control panel not only on a PC, but also on a tablet or phone. It’s just more convenient to do this on a computer.

After you go to the router’s management page, the first thing you will need is a username and password to log in. Usually this is admin/admin, unless you have previously changed this data yourself.

Next you need to go to the Wireless and Wireless Security tabs. wireless mode). This section contains the password for the wireless network. Most likely it will be displayed in the PSK Password line.

If you are unable to log in, look for instructions from your router. It will tell you exactly how to do this. Or look at the sticker on the bottom of the router. It may contain the address of the admin panel.

Special programs

There are many programs that scan the system and show all the passwords stored on the computer. Most likely, among them there will be a password for wi-fi.

For example, you can use WirelessKeyView, Dialupass, Remote Desktop PassView, RouterPassView, Wireless Password Recovery. They are very easy to use. Just download any utility and run it as administrator. If you download a program from unverified sources, do not forget to enable your antivirus.

The program displays a list of passwords in text document and it can be printed so that the information is not lost.

How to find out the password on an Android tablet

If you have forgotten your password and it is not saved on your computer, you can try to find it using your tablet. To do this you must have root rights. Next you will need Root program Browser. It can be downloaded on Google Play.

After launching the program, you need to go to the root of the folder and open one by one data – misc – wifi. In the wifi folder, find the wpa_supplicant.conf file and open it using any text editor, for example, a notepad. This file stores information about wireless connections, including passwords.

This is the most drastic method, and it is better not to use it unless absolutely necessary and resort to it only if you are an advanced user and can restore all settings.

Each router has a “Reset” on the back panel. This button is prudently hidden from users. In order to restart the router and return it to factory settings, you need to press the button with a toothpick, knitting needle, paper clip or other thin object.

After resetting the settings, you need to go to the control panel of the router and re-set their values, including the password. Despite being forgetful, try to come up with complex password so that cunning neighbors cannot connect to your distribution. Avoid common and banal combinations such as 12345, qwerty, admin and the like.

In the future, in order not to look for the password, write it down on a piece of paper and stick it on the back of the router with tape. This will eliminate the need to tinker with the settings of your computer or router and will significantly save time. You can also save data to text file on a computer, but this is not very reliable, because you can accidentally erase information or the computer may break.

) can be found not only in offices, but also in homes ordinary users PC. These little helpers allow you to provide Internet access a large number of various devices, from mobile phones to laptops and tablet computers. But sometimes they can create troubles. One of typical problems is password loss. Even I once forgot my router password.

If you lose your router password, you completely lose control over it. In such a situation, it becomes impossible to fully use the capabilities of the device.

If you, too, have encountered such trouble, then in this article you can find everything possible solutions this problem.

Standard password

First, you need to remember whether the standard password on . If you used a standard password, then it is easy to find it on the Internet. To do this, you need to enter something like this phrase “router name + standard password” into the search. In most cases, the following login and password combinations are used to access the router:

Also, for some router models, the standard password is indicated on the bottom of the device. Just turn the router over and look at the sticker.

Reset

If the default password doesn't work, it means you've changed it. In this case, all that remains is full reset router to factory settings. After this procedure, the router will return to the standard login and password. We have already figured out how to find the standard password.

In order to do this, you need to find the RESET button on the router case. Typically, this button is located on the back of the device, next to the cable connectors. This button is small in size and deeply recessed into the body of the device. Therefore, in order to press it you will need to use a paperclip or other thin and long object.

RESET button to reset settings

The disadvantage of this reset is that the router is completely returned to factory settings. After the reset, you will have to configure it again.

Today I will show you how to find out and change the default password on a TP-Link wifi router. Put New Password to the router - this is the first step that must be taken immediately at the stage initial setup. It also makes sense to change the password for connecting to wifi networks TP-Link. This can be done either through a computer or from a phone. As you know, on any router there are two, or even three, or more keys access. One of them is from the admin panel, the other is from the wireless network. Let's see how to change and install a new one on each of them.

How to change the Admin password on a TP-Link router?

Let's start with the access key to the administrator section. I’ll say right away that this instruction suitable for any Tp-Link models— TL-WR740N, TL-WR841N, TL-WR940N, TL-WA701ND, TL-WR743ND, TL-WR842ND, TL-MR3220, Arcehr C2, Archer C1200, etc.

How to find out the default wifi password on TP-Link?

Now let's talk about how to find out the password for joining the wifi network of a TP-Link router. Since there are many modifications, many have different connection implementations. For example, in some wireless signal by default it is not protected in any way. It has a name like “TP-LLINK_XXX” and is open for connection to everyone immediately after turning on the device. The authorization key itself is set when you first configure the router.

In others wifi models immediately protected by a password. In this case, it is indicated on a sticker located on the bottom of the router.

After connecting, you need to change it to another one in the control panel.

How to set your wifi password on a TP-Link router

Now let's see how the wireless network password is changed. Put your key to connect to WiFi, which distributes TP-Link router, you can menu “Wireless Mode - Wireless Protection”

IN old version in the admin panel it was referred to as “ PSK Password»

Having entered it, we will see the current Wireless SSID networks that are distributed this router.

We select the one in which you need to change the password via phone. And we contribute necessary changes.

Video on changing wifi password on TP-Link

Wireless networks have deeply entered our everyday life, and a Wi-Fi router can be seen in almost every home. However, as with the other home appliances, many users are limited to using the router by the on/off functions. Although knowing how to install and reset the router settings is really useful.

Every modern router has two options for how to return to its original state:

Use the special “Reset” button, which is on the case.
Perform a reset via device settings.

So, let's look at both ways to reset the router to factory settings.

As a rule, the “Reset” button is recessed into the body: to press it, you will need a needle, toothpick or thin knitting needle.

To reset the router settings, you need to press “Reset” and continue to hold it for about 10-20 seconds (with the device turned on). When you press, look at the power indicator - it should blink or go out, depending on the router model.

The “Reset” button on the router has another essential function - using it, you can start the flashing mode if the router is not reset to factory settings because there is no way to enter its parameters.

In this case, do the following:

Disable the router.
Press the "" button and hold it for about 15 seconds.
Then, without releasing “,” turn on the router and plug the power supply into the outlet.
Next, simply connect to the device using a cable.
Launch your favorite browser on your PC and enter the address of the router in the address bar; typically this is 192.168.0.1 or 192.168.1.1. Sometimes manufacturers use other addresses. You can see the address on the factory sticker, in the instructions, or on the box itself in which the gadget was sold.
Now all that remains is to specify the path to the firmware and then confirm the action.

After flashing the firmware, the router will have to be configured again. So the described actions can be considered one of the options on how to reset the router to its original state with a firmware update.

Resetting via parameters

Resetting the router to factory settings through the parameters is quite simple. We will look at the example of D-Link Dir 615.

But before moving on to the question of how to reset your Wi-Fi router, let's find out how to enter its settings. You already know where to look at the device’s IP address.

There you will also find your login and password. By default, the manufacturer sets login admin and password admin. If you change these values, then only you know them.

Find out the router's IP

There is an alternative way:

First, connect to the router (via - or using cable 45).
After that, launch the command line on your computer.
Enter the ipconfig command in it.

Your network settings will open below. Here you just need to find the line “Default gateway” - this is the IP address we need. Remember it, or better yet, rewrite it.

Now let's move on to the main question - how to return the router to factory settings:

How to reset your router: Video

Instructions

1. Launch the browser, enter it in the address bar of the router, for me it is 192.168.0.1.
2.When the page loads, you will see that you need to enter your username and password.

3.As a rule, the parameters then open immediately. In my case, I also need to click the “Advanced settings” button.

4.Now find the section “ System Settings” or “System”, or, as in my case, “Configurations”.

Hello! Today I want to return to the topic of working with wireless Wi-Fi routers. Judge for yourself, now there is probably no such person with a smartphone or tablet who could do without access to the Internet via WI-Fi, which makes the topic of setting up this device very relevant.

If you have already purchased a router before, then most likely you know that to configure it, first of all, you need to log in using the factory login and password (admin) to gain access to all its settings. Along the way, they change this password and username to their own.

Personally, I always do this, during any installation and connection of a router, which I recommend to you. But sometimes it happens that some time passes and the next time we try to log in we are not allowed into the settings due to an incorrectly entered password ( Forget password or login). For example, this is exactly where it will help us: reset router to factory settings which will return the credentials to standard view(admin).

Of course, losing a password is not the only problem that resetting the router can help solve. This can also help in solving problems such as the lack of a Wi-Fi signal or when any connected device automatically cannot obtain an IP address.

Or perhaps, when setting up Wi-Fi, you specified a static IP address and here in certain time I needed to return everything back. And in order not to reconfigure everything manually, you can simply reset all the router settings to standard, where the default value is automatic receipt and distribution of network addresses.

Preparing to reset your router

Perhaps, before resetting the router settings, for starters, I would recommend going to the router’s web interface by entering in the browser the IP address that is indicated on the sticker with technical information. And then again, try to go into the router settings menu using the factory credentials, which can be found on the same sticker.

Why do this? I'll explain. It happens that people think that they have changed their credentials and try to enter the settings using a password they created earlier. But as it turns out, no one changed this data ( they just forgot to change it) and to log in you just had to enter a standard password. Well, the user, as you understand, goes through everything possible options, received a message about incorrectly entered data.

To be honest, even I had such a case. Once I had 2 routers, after setting them up they worked flawlessly. But at one point, I needed to change the MAC address on one of the routers. I sat in the login window for a very long time trying to log in with my username and password, but nothing worked. To be honest, I couldn’t even imagine that I didn’t change the standard credentials during setup. But after going through all the possible options, I decided to use the last option (admin; admin;), and then a miracle happened, an interface with all the settings opened in front of me. Therefore, once again, first of all, I recommend trying and eliminating this option before resetting the router.

I would like to draw your attention to the fact that when resetting the settings to factory settings, the same the password will be lost which was used to connect to your network. Therefore, do not forget to set the connection key again.

How to reset your Wi-Fi router

So, to return to standard settings, we need to click on the button " RESET", which is located next to the ports for connecting the Internet cable and power. You will not see the button itself, since it is recessed into the holes to protect you from accidental pressing. Therefore, taking something thin, press this button all the way for a few seconds (5-10 seconds).

In most routers, as a rule, you need to wait until all the indicators on the front panel blink and you can release. That's all, resetting the router to factory settings is complete, do not forget that now you need to use the login and password specified on the router to log in.

I showed an example of a button on the D-Link DIR 300, but on others it is not very different, the main thing is to look for small hole with an inscription " reset" So, good luck to you and don’t forget to join us on social networks.

Sometimes, due to various reasons, sometimes there is a need reset WiFi router settings to factory. Such reasons include cases when WiFi router is not accessible by IP address, or does not allow access to the router settings, swearing at the password. Or the user simply forgot the password to access the device settings. After resetting the settings, the WiFi router will be accessible using a standard IP address - or with a standard login and password (usually login admin and password admin). By the way, Router IP address, login and access password are usually indicated on a sticker located on the bottom cover of the WiFi router.

There are 2 ways to reset settings to factory settings.

1 way. Software reset of router settings.

Applies in the case where If you have access to the router web interface. This method is used in the case where if the WiFi router is unstable. Resetting to factory settings sometimes helps solve this problem. Software reset of router settings is in the section system parameters router. Typically, a factory reset is called Reset Factory Defaults. Just check the box next to this item and press the button OK or Apply. The router will use the standard factory configuration and reboot, after which it will be available with standard parameters.

Example 1. Resetting the TP-Link router:

Go to the section System Tools => Factory Resets:

Press the button Restore, And waiting for the router to reboot.

Example 2. Resetting the Asus router:

In the web interface menu, select the section Administration, tab Manage Settings:

Press the button Restore And waiting for the router to reboot.

Example 3. Resetting the D-Link router:

In the web interface menu on the right top corner press the button System and in the drop-down menu select the section Factory settings:

Confirm the action and waiting for the router to reboot.

Method 2. Hard reset of the router.

For hard reset settings everyone has it WiFi router There is special button Reset. It is located, as a rule, either on the back wall of the device or on the bottom cover. It is made in the form of a round hole, in the depth of which there is a small button.

To press it, you will have to use a fountain pen, pencil or paper clip. Need a button press for 10-15 seconds.

As soon as the router will blink indicators on the front panel or they will just all go out at once - let go Reset button And wait for the WiFi router to boot. After these manipulations, the router will boot with the factory configuration.

D-link routers are not much different from their counterparts in terms of resetting parameters. However, in order to simplify life, many people who have a device of this brand should disassemble this process on D-link DIR-615/A (see). Everything listed below is perfect for other models of this company. In general, resetting settings on all routers occurs in a similar way, however, each brand has its own nuances that can make this task difficult.

Be careful! When you switch to the original settings, that is, factory settings, all subsequent changes that you made during the operation of this device will disappear. After the procedure, update the settings so that you can work normally with your existing provider, as well as use the Wi-Fi wireless network.

Reset manipulation is a great solution if you have forgotten your password or want to set a new one. Forgetfulness is common to many users, so if you forget the required set of characters to log in, feel free to resort to this solution to the problem.

Reset button – reset assistant

One way to get rid of set parameters is a button press. It is designed specifically to carry out these actions.

This switch is located on the body of the router, it is not difficult to find it, since there is a name RESET. When you perform this maneuver, make sure that the router is receiving power from the mains. The button is located, as it were, in the depths of the case. This is done to prevent accidental reset. Use something at hand to press it, hold for about 10 seconds.

Observe the icons located on the front of the case. They should not work except for one thing - POWER. This means that the reboot occurred in the same way as the recovery. At unsuccessful attempt– simply repeat the algorithm of actions described above.

Resetting settings via the control panel

Another way to bring all parameters to their original state is to turn to the help of the control panel. This function available on all routers, regardless of their brand, model and other characteristics. However, to guarantee you a positive result, you need to make sure that you have access to the settings (that is, you know your login and password). This will take you to the settings page.

How to proceed

Now we will describe the step-by-step actions:

Opening the browser;
print in address bar the following combination - 168.168.0.1 ;
Specifying data (standard - admin and admin).

Selecting an element System, Further - Reset. We agree with the selected actions by clicking Ok.

You need to spend a little time waiting, after which the router will reboot, that is, all previously existing settings will be deleted, and the factory settings will be configured instead.

Wireless networks have deeply entered our everyday life, and a Wi-Fi router can be seen in almost every home. However, as with other home appliances, many users use a router...