What is the standard Nokia password for all phones? How to remove the security code for Nokia Nokia c3 01 how to remove the security code

Instructions

First of all, you will need a reset code or a firmware reset code. You can get them by contacting a Nokia service center. You can contact him using the contact information located on the website www.nokia.com. You will need an IMEI number, located behind the back cover under the battery. You can also use a search engine to find codes that are publicly available. Please be aware that using some codes may result in the loss of data stored on your cell phone, so only use those that come from trusted sources.

If your attempt fails, reflash your phone. To do this, you will need to synchronize your phone with your computer. Download drivers and software from the website www.nokia.com by selecting your phone model from the list. If the data cable required for flashing is not included in the package, buy it at a cellular store. Connect your phone and make sure the software "sees" your phone.

To reflash your phone, you will need the factory firmware responsible for the operation of the phone, as well as software to perform this operation. Use Nokia fan sites such as allnokia.ru. With their help, you can find not only the necessary software, but also detailed instructions for your phone model. The best option would be to use factory firmware that does not contain traces of outside interference. Make sure your phone battery is fully charged, otherwise your mobile may turn off in the middle of the operation. Copy personal files from your phone to your computer, and then update your phone software. Once the operation is complete, copy the data back to your mobile phone.

Sources:

how to remove security code on nokia
2610 Requests security code

Nokia phones have a feature called a security code. It is used to protect data that you consider confidential or simply want to hide from outsiders. In case you have forgotten your security code, you can easily unlock it by following simple instructions.

Instructions

First of all, contact your Nokia representative to obtain firmware reset and password reset codes for your model. There are many different versions of codes on the Internet, but no one will take responsibility if yours gets damaged as a result of an incorrectly entered code. To prevent this from happening, request an official letter from a company representative.

If you urgently need a code, but no information is received, reflash the phone. In this case, all data will be lost, so use this method only when you are completely tired of waiting for a response from Nokia. In order to reflash your phone, you will need to synchronize it with your computer and reflash it using special software.

If step number two is difficult for you, or you have neither the time nor the desire to do this, contact a Nokia service center. Regardless of whether your phone is under warranty or not, they can help you with both unlocking and flashing. Don't forget to tell the consultants what exactly you want to do - reset the firmware or simply reset the security code.

The security code is used in most phone models, including Nokia phones. This code is used to maximize the safety of the user's personal data when the phone falls into the hands of third parties. But sometimes owners themselves forget the security code. In this case, one of the methods by which you can unlock the security code will help you.

Instructions

First of all, contact the manufacturer, i.e. Nokia in order to provide you with all the information on the codes for resetting settings and the firmware reset code, as well as the code for unlocking. In this case, it all depends on how much you can convince the manufacturer that the phone really belongs to you. Prepare documents confirming the fact of purchase and sale and a sales receipt.

After you receive these codes, enter them on the keyboard depending on what exactly you want to do - erase all personal information and return to factory settings, simply reset the settings, or remove the phone's lock code.

If nothing works for you, reflash the phone. To do this, you will need a data cable, with which you will need to connect your phone to your computer. After this, reflash the phone using special software and firmware that you download from the Internet. After flashing, you will receive a completely clean phone, with factory settings configured and the lock code removed.

Nokia cell phones, like phones of other brands, have a security code to prevent unauthorized people from using the phone. However, if you have forgotten the code, there is a special utility that allows you to remove the power-on security code.

You will need

- Mbro USB Nokia Tools Lite program.

Instructions

Download Mbro USB Nokia Tools Lite from the Internet. You can find a link to download this program through any search engine - enter the name and press enter, and then follow the links provided. Can also be found on the website softodrom.ru. Scan downloaded files with an antivirus, otherwise you risk introducing a virus into your computer. Typically, when you upload a file, there should be an automatic full scan of the file for malicious code or files.

Unzip the downloaded files and run the program. Such software must be installed in the system directory of the local disk. The main program window consists of a message display area and controls located on the right. Connect your phone to your computer by selecting PC Suite mode. To do this, use a miniUSB cable.

Find the Security Code item and click on it with the mouse. The program will display information about , and in the bottom line, following the words Security Code (New Position), the security code of your phone will be indicated. Check the received code by entering the combination of numbers into your phone. This method should be suitable for all Nokia phones running on the BB5 platform. Now remove this code or install a code that you will definitely not forget/

If you have a phone of a different model, try to find a similar program through a search engine. You may not be able to view the security code, but you can certainly find a utility to remove the code from your mobile phone. There are also some phone models on which it is impossible to view security codes. To solve such problems, you need to take your phone to a specialized repair center or to a sales center, since consultants in many cases help to cope with such problems.

Video on the topic

The phone lock code allows you to protect your device from unauthorized use in case the SIM card is replaced or lost. This code is entered when you turn on the phone. Sometimes the user may forget this information, so it is necessary to use various methods to determine the lock code.

Instructions

Take your locked Nokia phone to a service center so that specialists can find out the lock code. However, sometimes there is no time to contact support or the phone is needed during non-working hours. In these cases, you can independently find out the necessary information using special programs.

Download NSS and Nokia Unlocker software, which will allow you to find out the lock code on your Nokia. You can find these applications on the Internet on specialized websites. Before working with programs, check them for viruses and compare checksums.

Install the NSS application on your personal computer. Connect your Nokia phone to your computer using a special USB cable. It should be noted that the device must be turned on. Otherwise, the programs will not be able to connect to your Nokia phone.

Launch the NSS program. A request will appear with the text: “Please select from the following Service device you will be using after the installations”, in which you must select the “Virtual USB device” item. Find the magnifying glass icon in the upper right corner of the program that says “Scan for new device.”

Click the “Phohe Info” button, and then in the window that opens, click the “Scan” button. The information “Phone IMEI” and “Phone version” will appear on the left side. Select the “Permanent Memory” tab and check the box next to “To File”, then click the “Read” button. The program will start processing the process. Wait a while and save the file with the *.pm extension.

Launch Nokia Unlocker. Open the path to the saved *.pm file and click on the “Define” button. As a result, the program will issue a lock code for your Nokia phone. Enter it into the request window on your phone screen and unlock it.

Video on the topic

Sources:

nokia phone lock code

The codes on mobile devices of all manufacturers are located in approximately the same place. There are also universal combinations for viewing them that allow you to view identifiers if you have a phone.

You will need

- phone packaging;
- documents on the phone.

Instructions

In order to find the imei number on your Nokia mobile device, enter the combination *#06# in the phone's standby mode, after which its identifier code will appear on the screen, containing service information in encrypted form. You can find out more about the structure of this identifier at the following link: http://aproject.narod.ru/note/imei.html. You can also view this identifier under the device’s battery on a special sticker after opening the compartment cover.

If you need to view the identification number of your Nokia mobile device without having the device in your hands, carefully look at the box of this phone; on the side, where information about the color and model is usually written, there is a sticker with the imei number. Also look for this number in the warranty card, which in most models is located on the last pages of the instructions.

Never throw away the packaging and documentation of your phone before the end of its useful life - they may be useful to you if your mobile device is lost or stolen. There are also special imei recorders that allow you to quickly track its location and block your mobile device in case of theft or loss, thereby making your phone useless for thieves, since when you install a SIM card in your phone, a message with an identifier will be sent to the operator, after which calls will not be available.

To check your phone, please enter its ID on the following site:

http://www.numberingplans.com/?page=analysis&sub=imeinr.

After analysis, the information will give you a message with data about your phone based on the information stored in imei.

Video on the topic

Helpful advice

Check your phone ID when purchasing.

When using Nokia cell phones, you may encounter several types of blocking. The steps you need to take to remove it vary depending on the type of blockage you are experiencing.

Instructions

Operator locking is designed to prevent the phone from being used on a network other than the original one. Most often you encounter it when buying. In this case, you will need to contact the operator under whom the blocking was carried out. Provide IMEI, as well as your data that was provided when purchasing the mobile phone. If you bought the phone secondhand, then you will need to contact the original owner to find out this information. Request code. Enter it when you turn on the phone with a “foreign” SIM card, thus unlocking your mobile phone.

The second type of blocking that you may encounter is blocking the phone itself. Nokia mobile phones provide protection in case of loss or theft of the phone - this is a security code that must be entered when turning on the phone. To reset it, you will need a firmware reset code or a settings reset code. Of course, you can use codes that are publicly available on the Internet, but the most reliable option would be to request them from an official representative of the company in your city or by contacting the contacts posted on nokia.com. Provide your phone's IMEI number as well as its serial number, and then request the codes described above.

SIM card blocking is used to protect the subscriber’s personal data such as his mobile number, address book and messages contained in the SIM card memory. When you turn on the phone, you are asked for a PIN code. If you have forgotten your PIN code and entered it incorrectly more than three times, you can reset it using the pack code located on the plastic packaging of the SIM card. If this option is not possible, you will need to contact the representative office of your mobile operator to replace your SIM card. Provide your passport details, after which you will be provided with a new SIM card without changing your phone number.

The security code installed in mobile phones is a means that prevents unauthorized access to your phone's resources. In addition, this code is required to perform some operations with the phone. If you suddenly forget the code, you can restore it. Let's consider this situation using the Nokia brand as an example.

Nokia
*#746025625# [*#sim0clock#]
*#92702689# [*#war0anty#]

*#7370925538# (valet code reset) 6230
*#746025625# [*#sim0clock#]
*#92702689# [*#war0anty#]
To access the service menu of the device, you need to dial *3001#xxxxx#, where xxxxx is the security code, which by default is 12345. Thus, to enter the menu you will need to dial *3001#12345# In this mode, for example , you can change the network operator name displayed in standby mode. To do this, select NAM1, scroll to the Alpha Tag sub-item, change it as desired (for example, write Vovochka and press OK. Exit the mode by turning the phone off and on.
It is possible that this code will also work on other phone models (51xx, 61xx).

*#0000#-birthday and phone software version
*#06#-on many imei phones
*#92702689# - some kind of *broken menu - I don’t know why
*#3370# and *#3370* - on and off call quality - something like that, but not all operators support this crap. Nokia itself was re-flashed v 5.79

NOKIA 5120&5125 service code:
In addition to the above, there are a couple more SERVICE CODE
1) *#639#(*#NEW#) is used to add a number, i.e. you can register several phone numbers and switch between them.

2) *#92772689#(*#WARRANTY#)
1) Serial number
2) Release date
3) Date of reprogramming
4) Date of last repair.
5) Includes data transfer
6) Total talk time.

3) *#837# or *#VER# phone version (not supported by all models)

4) *#9999# or *#6120# softa version (not supported by all models)

before changing anything in the settings
THINK WELL IF YOU CAN RETURN EVERYTHING IN PLACE LATER
ESPECIALLY IN POINT 1
It is not possible to change the operator name on all NOKIA models; in the latest models, this feature is blocked by the manufacturer.
the only (almost) plus of this code service *#3001#12345# is the ability to recover the “FORGOT” password for turning on the mobile phone.
And the second plus is that the level of the received signal is visible.
NOKIA 2110
Show EMEI number *#06# >
Show phone software version *#9999# > or for 2110i *#170602112302# > or *#682371158412125# >
Show phone production date *#3283# >

3110
Show EMEI number *#06# >
Shows software version *#3110# >
Restores factory settings *#7780* >
Entering the special menu *#92702689# > Commands in the special menu:

5110
To reduce electricity consumption, you can disable the EFR (Enhanced Full Rate) function #3370# >
To enable the EFR function *3370# >
To reduce the battery discharge rate and enable the HR (Half Rate) function *4720# >
To enable the HR function #4720# >
To disable SP encodings (provided that the device PIN code is enabled): When prompted for a PIN code, press “C”, then “up arrow” or “down arrow”. Press "C" until the display clears. Then enter the command to change the PIN code, but do not actually change it - **04*PIN*PIN*PIN# > The only problem is that this procedure will have to be repeated every time you turn on the device.

6110
To reduce electricity consumption, you can disable the EFR (Enhanced Full Rate) function #3370# >
To enable the EFR function *3370# >
To reduce the rate of battery discharge and enable the HR (Half Rate) function *4720# > then turn off and turn on the phone again.
To enable the HR function #4720# >
To view IMEI number *#06# >
Show software version *#0000# >
Entering the special menu *#92702689# > Commands in the special menu:
6232 OK shows the month and year of manufacture
7332 OK shows the date of the last change in the program
7832 OK shows the date of sale (if entered)
37832 OK, you can enter the sales date MMYY (be careful! You cannot change it later)
9268 OK shows serial number (IMEI)

7110
View firmware version *#0000# >
View IMEI *#06# >
Enter the service menu: *#92702689# > By successively pressing down you will see after IMEI:
1 IMEI (International Mobile Equipment Identification)
2 MM/YY (issue date)
3 Date of purchase (here you can enter the date of purchase if your phone is new. Remember that the date is entered once and if you entered the wrong date, it will be impossible to correct it later!
4 Date of repair (if repairs were made)
5 Date transferred to user? ATTENTION: to exit this mode you need to turn off and turn on the device again.
Checking the card's support for SIM-clock-stop mode (only for firmware version 5.24 or later) *#746025625# >
Enable Enhanced Full Rate Codec (EFR): *3370# > will be enabled after phone reboot (consumes more power) Disable Enhanced Full Rate Codec (EFR): #3370# > and EFR will be disabled after phone reboot
Enable Half Rate Codec: (available only for firmware version 4.33 or earlier) enter *4720# >and Half Rate mode will be enabled after rebooting the phone Disable Half Rate Codec: enter Enable #4720# >and Half Rate Codec will be deactivated after rebooting the phone

Smartphones

*#06# - IMEI of the smartphone (IMEI number - consists of 15 digits, it is unique and every phone has it). This number must match the number on the box.
*#0000# - firmware number
safe mode ("PENCIL"+Power)
*#7780# - restore original (working) smart settings
*#7370# - reset the smart to factory settings (i.e. all software, contacts, calendar, etc. are deleted - the smart becomes clean!)
ATTENTION! To use the last two codes you will need to enter the phone lock code (default 12345)!
Safe Mode when you turn on the phone - “PENCIL” + “Power Buttion”
Loading into Safe:
1. Turn off your phone
2. Press "PENCIL" (and DO NOT release)
3. Press the power button
4. Hold the “PENCIL” until it is FULLY loaded!!!
*#2820# - unique address of the Bluetooth module of your device (may be needed by other devices that cannot display names).
*#7370925538# - clearing the “Wallet” (for 6600 and higher - which have a “Wallet”).
*3370# (phone must reboot) improves sound quality (using EFR), but reduces battery life.
#3370# - resets the sound quality to normal (cancels the *3370# code).
EFR CODEC (Enhanced Full Rate)
This feature, when enabled, should, in theory, significantly improve the quality of transmitted speech, but, unfortunately, it must be supported by the cellular operator. When it works, the phone's power consumption during talk time increases slightly (about 5%). As far as we know, none of the Russian mobile operators support this function. The principle is based on a different speech compression algorithm (ACELP) and occupies a wider frequency band.
*4720# - enable Half Rate Codec (HFR)
#4720# - disable Half Rate Codec (HFR)
HR CODEC (Half Rate)
Significantly degrades speech quality, but saves battery by about 30%. Again, must be supported by your cellular operator.
*#92702689# - enter the service menu [*#war0anty#]

Secrets of NOKIA 6600 and other Smartphones

*#06# - IMEI of smartphone

*#0000# - Firmware number

*#7780# - Restoring the original (working) settings of the smartphone

*#7370# - Reset the smartphone to factory settings (all software, contacts, calendar, etc. are deleted - the phone becomes clean)

*#2820# - Bluetooth code (unique address of the Bluetooth module)

*#7370925538# - clearing the “Wallet” (for 6600 and above - and which have a “Wallet”).

Safe Mode when you turn on the phone - "ABC" + "Power Buttion" (in 3650 "ABC" is a "pencil")

Loading into Safe:

1. Turn off your phone
2. Press "ABC" (and DO NOT release)
3. Press the power button
4. Hold "ABC" until the phone is FULLY loaded!!!

And here is another additional way to format your phone (with the loss of all data), in case you can’t even dial the treasured code *#7370# or even start the handset: in the off state, press three keys at the same time, green for answer, asterisk and key "3". And now turn on the pipe without releasing the keys. Formatting will begin.

To use the codes *#7780# and *#7370#, you will need to enter the blocking code (default 12345).

##002# cancel all forwardings.

**004*number# enable forwarding of all calls to the entered number.

Secrets of NOKIA 3210, 3310, 3330, 8210, 8250, 8850, 9110

Shows phone serial number (IMEI)
*#06#

Software Version
*#0000#

1 Line - Version
2 Line - Date of release of the program. provision.
3 Line - Phone type.

Warranty codes:
*#92702689# (= *#war0anty#)
You will be prompted to enter a type of "warranty code"

The service menu will be displayed on the screen:
IMEI (International Mobile Equipment Identification)
Phone release date MM/YY
Phone purchase date
Repair date
Transfer user data?

*3370# - Activation of full-bit encoding mode (Increases communication quality, reduces battery life)

#3370# - Deactivate full-bit encoding mode.
Note: After entering these codes, the phone will restart with new settings.

Check if you can stop SIM Clock:
*#746025625# (= *#sim0clock#)

Codes for determining whether LOC is installed on the device or not
Your Nokia can be blocked by 4 types of locks:
SPROVIDER-LOCK - 1
NETWORK-LOCK - 2
COUNTRY-LOCK - 3
SIMCARD-LOCK - 4

To check the status of these locks, enter the following line:
#pw+(MASTERCODE)+(y)#, where
- p = press * 3 times
- w = press * 4 times (in the original, on the contrary, w - 3 times, p - 4)
- + = press * 2 times
- MASTERCODE = exactly the thing that was used to lock your device. But to check the status, enter 1234567890
- y = number from 1 to 4

If your phone is locked by an SP (Service Provider) code that is unknown, then try the following:

1. The Pin code request must be enabled;
2. turn on the phone;
3. When asked for a Pin code, press C, then the up or down arrow;
4. press C and hold until the display clears;
5. Now enter the command to change the Pin code, but without changing it;
**04*Pin*Pin*Pin#
This operation must be repeated every time the device is turned on.

Half Rate Codec:
Inclusion:
*4720# - Half Rate will be activated after the phone is overloaded (power consumption is reduced)
Shutdown:
#4720# - Half Rate will be turned off after the phone is overloaded
Enhanced Full Rate mode allows you to get much better sound quality with the same number of bits of transmitted information, but it loads your provider’s network more, and the call time is reduced by about 5%

Half Rate mode degrades sound quality, but unloads the network and allows the provider to pass more calls through it, the duration of the call time increases by about 30%

Security code Information in IMEI (International Mobile Equipment Identity) contains:

XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type Approval Code (first 2 digits = country code).
FAC = Final Assembly Code (For Nokia FAC=10).
SNR = Serial Number.
SP = Spare (always SP=0).

**04*oldPIN*newPIN*newPIN# - Change PIN code

**042*oldPIN2*newPIN2*newPIN2# - Change PIN2 code

**05*PUK*newPIN*newPIN# - Unblock PIN code

**052*PUK2*newPIN2*newPIN2# - Unblock PIN2

*#35# - Check the blocking status of all incoming calls

**35*code# - Activate blocking of all incoming calls

#35*code# - Disable blocking of all incoming calls

*#33# - Check the blocking status of all outgoing calls

**33*code# - Activate blocking of all outgoing calls

#33*code# - Disable blocking of all outgoing calls

*#330*code# - Check the status of blocking all calls

**330*code# - Activate blocking of all calls

#330*code# - Disable blocking of all calls

Nokia Code function

*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR) .
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
*#4720# With this Nokia code you can deactivate the Half Rate Codec.
*#0000# Displays your phones software version, 1st Line: Software Version, 2nd Line: Software Release Date, 3rd Line: Compression Type.
*#9999# Phones software version if *#0000# does not work.
*#06# For checking the International Mobile Equipment Identity (IMEI Number) .
#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .
#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .
*#147# This lets you know who called you last (Only vodofone).
*#1471# Last call (Only vodofone) .
*#21# This phone code allows you to check the number that "All Calls" are diverted to.
*#2640# Displays phone security code in use .
*#30# Lets you see the private number.
*#43# Allows you to check the "Call Waiting" status of your cell phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to .
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to .
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores.
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible .
*#7760# Manufactures code.
*#7780# Restore factory settings.
*#8110# Software version for the nokia 8110.
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.
*#94870345123456789# Deactivate the PWM-Mem.
**21*number# Turn on "All Calls" diverting to the phone number entered.
**61*number# Turn on "No Reply" diverting to the phone number entered .
**67*number# Turn on "On Busy" diverting to the phone number entered .
12345 This is the default security code.
press and hold # Lets you switch between lines.

Input of all "indications" directly one behind the other - without "blanks" (these serve only the better overview).
Code
last change Function/description/information
*# 06 #
12/16/03 Seriennummer/IMEI indicates (actually also a GSM is code - see further below)
*# 0000 #
16.12.03 SW version announcements (e.g. V3.42.1, 16-10-03, Nhl-10)
*# 2820 #
12/16/03 Bluetooth (BT) device address indicate.
xx#
12/16/03 Directory quick access (xx = storage location and subsequently lozenge e.g. 24 #)
A/from key
12/16/03 Short pressing for menu for switching between profiles
Menu key
12/16/03 Long pressing for "task manager" - switching between active programs (with "C" key programs can be terminated.)
Menu quick access
01/18/04 Over in the menu e.g. to point 3.1 arrive simply 31 enter (if the third symbol a file is opened is for these and then in it started the first Programm/Icon).
Autostart go around
12/28/03 When switching on of the Handys on to the pin inquiry the key "ABC" (pin) comes the whole time keeps pressed - this is to ignore (allegedly) the autoinitialization programs.
#
02/15/04 Do not switch between different lines (AS)... goes e.g. with Austrian ONE Handys (see nose cunning). I could not try out however also, since I did not have 2 lines on the SIM map.
12345
12/16/03 ... is according to standard set the Nokia nokia-Sicherheitscode.
0000
12/16/03 ... is according to standard those (with Vodafone windshield frame section) set 2te pin and that standard net code/password
With D1 the standard net code is the last 4 numbers of the card number without HLR e.g. 99999234-5/55 - > 2345
0 - for a long time press
10.25.04 If one the "0" in the main menue for a long time presses those homepage of the standard WAP connection is called.

________________________________________ ________________________________________
Caution - starting from here the codes are "dangerous"
*#7370925538#
* # of res wallet #
12/28/03 ... is to be deleted the code around the "wallet"! Input like normal telephone number (not in wallet code inquiry windows).
NOTE! Afterwards the "wallet" is empty, can again be put on however with new code.
*# 7780 #
01/17/04 The "original attitudes" and telephone re-establishes is again started (an appropriate inquiry and it follow before must the sicherheitscode be entered).
NOTE! Afterwards various "attitudes" are away - among other things these:
Points of entrance (Provider dependent points of entrance and attitudes)
Bluetooth systems
Favorite
Allocation of the two keys (beside Navi keys) in the main menue
Profiles are "neglected" (as with distribution) - still there however new bell tones, etc. are...
SMS/MMS/E Mail attitudes
Logos and spielstaende (allegedly) also deleted...
Programs, calendars and contacts, etc. not changed...
Also the sicherheitscode remains.
This putting back goes also via menu under "attitudes - general - original telephone once.".
*# 7370 #
01/21/04 Soft format: If the Handy (only telephone memory) formats, puts back the settings (see * to # 7780 #) and implements a software RESET. (however still another inquiry comes before.)

This is "only" a soft format... Hard format with "green, 3, *"... see below.
Green, * 3
01/21/04 Hard format: If the Handy (only telephone memory) formats, puts back the settings (see * to # 7780 #) and implements a RESET.
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!

Proceeding: Equipment switch off, which keep "green key" (take off) at the same time pressed, "*" and to "3" key and switch the equipment on (the keys thereby keep further pressed)... to "Formatting " on the display appears...
If that does not function, then equipment for 1 hour switch off, Akku so for a long time rausnehmen and try again.
"only" virtual the memory is generally cleared - formatting can take place genuine only in a Nokia service center, if the Fash is deleted there and/or new L.G. is installed.
Mixed
12/16/03 * # 92702689 #, then switch - system menu off (goes with me not)

The following code do not fold (with me also):
* EFR0 # (* 3370 #) EFR activate (EFR = Enhanced Full rate Coding - language optimization)
#EFR0# (#3370#) EFR switch off
* HRC # (* 4720 #) HRC switch on (HRC = helped rate Coding - language compression)
# HRC0 # (#4720 #) HRC switch off
SIM LOCK
01/12/04 Simlock status query: (use "*" the key over "p,w" and "+" indications to enter)
# pw+ 1234567890 +1 # Provider LOCK status
# pw+ 1234567890 +2 # network LOCK status
# pw+ 1234567890 +3 # Country LOCK status
# pw+ 1234567890 +4 # Sim Card LOCK status

The code 1234567890 must be computed with a program e.g. SmartDCT4Calc and/or DCT 4 code Calculator from IMEI, etc...

Info. to Simlock: SIM LOCK makes it for the offerer/network carriers possible, subsidized (verguenstigte) Handys to offer. Thus one makes oneself if necessary punishable if one SIM LOCK deactivated - in addition the warranty can be purged. I take over for it no adhesion or responsibility!

SMS Tipps
01/27/04 To Tipps & cheat about SMS (with appropriate codes) are immediately in the FAQ list.
For example for the topic: SMS "retard" and/or deferred send, acknowledgment of receipt, reports...
Mark more simply
03/01/04 To Tips & cheat to the topic "mark" e.g. with SMS entrance.
Over simply to mark simply the "pin" (ABC key) hold some e.g. SMS and move then Jostick downward.
Call number transmission
01/01/04 * 31 # - (CLIR - Calling LINE identification Restriction switches on for the general call number transmission)
# 31 # - switch off the general call number transmission
# 31 # [ telephone number ] - with the next call suppress the own call number (thus temporary)
* 31 # [ telephone number ] - with the next call transfer own call number (thus temporary)
* # 31 # - status query (of call number transmission)
# 31 * [ telephone number ] - own call number show, although receiving station switched call number suppression on. (is not usually de-energized of the Netz(betreiber).)

* 30 # - switch ( TIE-clip - Calling LINE identification presentation for the announcement on of the call number of the caller )
#30# - switch off
*#30# - status query

This also partly goes with 6600 via Men: Attitudes - calls - own No. send...

The following codes are not supported by most Netz(betreibern):
* # 76 # - announcement of the call number, under which one reached the calling (not its call number during rufumleitung!) ( COLP - COonnected LINE identification presentation )
* 76 # - switch on
#76# - switch off

* # 77 # - announcement of the call number, under which the caller reached me (not my call number during rufumleitung meinerseits!) ( COLR - CONnected LINE identification Restriction )
* 77 # - switch on
#76# - switch off
Call bypasses (call forwarding)
01.01.04 Bypass code (U):
U=21 always
U=61 retards
U=62 not attainable
U=67 occupies

U=61, 62, 67 can be parallel active

U=21 - > and then no more call signaling overwrites U=61,62 and 67! Service code (D):

D=11 language only
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 SMS only
D=18 all data except SMS
D=19 all services except SMS
D=20 all services

D=22 all synchronous services

D=26 DATA pack exchange on the left of inclusive. PADs
D=27 services thru PADs
D=29 12 Kbps digitally left

** U * [ goal call number ] * D # - bypass switch on
Input without * D means bypass of all services

## U ** D # - switch bypass off (individual bypasses and service code)
Without ** D all services are switched off to bypasses
## 002 # (all bypasses for all service codes switch off)
## 004 # (switch off only U=61, 62, 67 and for all service codes - thus ", not attainable, nonacceptance "occupies)

* # U ** D # - status of the bypasses query:
Input without **D queries all services and bypasses

Bypass in the speaking and/or fax box: Number in bypass procedure with D=11 and/or 13 enter
Goal call number (e.g. D2-Netz: +49,172 xxx) and Handynummer without preselection (if necessary 172 replacements) enter.

Tap: During switched on rufumleitung "with occupied" being able to "to reject" calls by one the red key during "to ring" presses. The caller is then passed on to the goal call number of the occupying bypass (e.g. mailbox).
Type for waiting period during rufumleitung 61: ** 61 * [ goal call number ] * 11 * [ time in sec. (5 to 30) ] #

This also partly goes with 6600 via menu: Attitudes - rufumleitungen -...
Knock/stops/parks/faults
01/01/04 Knocks is signaling a secondary call during a current discussion
* 43 # - switch on
#43# - switch off
*#43# - status query

This also partly goes with 6600 via menu: Attitudes - calls - knocking...

0 - reject while the discussion is knocking
1 - discussion terminate, knocking discussion accept
discussion certain (y) terminate 1 (y)
2 - discussion park, knocking discussion accept
discussion certain and new discussion leads 2 parks (y)

0 - caller the busy condition signal

This also partly goes with 6600 via menus existing during the discussion.
Call barrier
01.01.04 Possible only if bypass of the service code is switched off.
Check code (S):
S=33 all outgoing transmissions
S=331 outgoing abroad
S=332 outgoing abroad except home
S=35 all arriving transmissions
S=351 all arriving abroad

Special check codes (s) delete:
Switch off only in connection with the procedure
S=330 check code status outgoing & arriving transmissions switch off
S=333 check code status outgoing transmissions switch off
S=353 check code status arriving transmissions switch off Service code (D):
Not all nets support all services
D=10 language and fax (all calls)
D=11 language only
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 SMS only
D=18 all data except SMS
D=19 all services except SMS
D=20 all services
D=21 all asynchronous services
D=22 all synchronous services
D=23 3.1 kHz GSM of language services
D=24 all synchronous POINT ton of POINT DATA inclusive. PADs
D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D=26 data packet exchange links incl. PADs
D=27 services thru PADs
D=29 12 Kbps digital link

*S**D# - einschalten der Anruf-Sperre
#S**D# - ausschalten der Anruf-Sperre
*#S# - Status der Anruf-Sperre abfragen

Passwort fur Handy Sperre andern:
** 03 ** * * #
** 03 * 330 * * * #

Dies geht beim 6600 auch teilweise via Menu: Einstellungen - Anrufsperre ...
PIN andern
01.01.04 ** 04 * * * #
** 042 * * * #

PIN entsperren: ** 05 * * * #
PIN 2 entsperren: ** 052 * * * #

Dies geht beim 6600 auch teilweise via Menu: Einstellungen - Sicherheit - Telefon und SIM ...
Diverse Codes
02.02.04 Die folgenden Codes klappen nur in einigen (wenigen) Netzen/Netzbetreibern ... leider z.B. nicht im Vodafone D2 Netz (in Germany):
*#100# - Eigene Nummer (Own Number)
*#101# - HLR Nummer
*#102# - Switch Nummer
*#103# - Zeit im Netz (Network Time)
*#104# - Anrufbeantworter Nummer (Voice mailbox number)
*#105# - Switch number
*#147# - Letzter Anrufer (Last Caller)

#646# - Minutes Used: (646 spells "MIN")
*#1345# or *174# - Vodafone Prepaid balance

*78 - Do not disturb - nur in Nord America in GSM und CDMA Netzen moglich
*79 - Cancel (s.o.)

ANDROID secret codes for Nokia C3

DISCLAIMER: This information is intended for advanced users. It is not intended for ordinary users, hackers or mobile thieves. We will not be responsible for the use or misuse of this information, including loss of data or damage to equipment. So use these codes at your own risk and to your advantage.

Code: - *#*#4636#*#*
This code can be used to obtain information about your phone and battery. The following 4 menus are displayed on the screen:

*Phone information
* Battery information
* Battery history
* Usage statistics

Code: - *#*#7780#*#*
This code can be used to perform a factory reset. It will remove the following things:

* Google account settings stored on your phone
* System and application data and settings
* Downloaded apps

This will NOT delete:

*Current system software and associated applications
* SD card files such as photos, music files, etc.

PS: After you enter this code, you will see a window asking you to click the “Reset phone” button. This gives you the option to cancel your operation.

Code: - *2767*3855#
Think before entering this code. This code is used for factory reset. It will delete all files and settings including internal memory. It will also reinstall the phone's firmware.

PS: Once you enter this code, you will not be able to cancel the operation until you remove the battery from the phone. So think twice before entering this code.

Code: - *#*#34971539#*#*
This code is used to get information about the phone's camera. Shows the following 4 menus:

* Camera firmware update in image (don't touch this option)
* Updating camera firmware on SD card
* Get camera firmware version
* Get firmware update counter
WARNING. Never use the first option, otherwise your phone's camera will stop working and you will need to take your phone to a service center to reinstall the camera firmware.

Code: - *#*#7594#*#*
This code can be used to change the behavior of the End Call/Power button on your phone. By default, if you long press the button, a screen will appear asking you to select any option from silent mode, airplane mode, and power off. You can enable direct shutdown by pressing this button so as not to waste time on selection.

Code: - *#*#273283*255*663282*#*#*
This code opens the file copy screen where you can backup your media files such as photos, audio, video and voice notes.

Code: - *#*#197328640#*#*
This code can be used to enter service mode. You can run various tests and change settings in service mode.

WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use the Menu button to run various tests)

*#*#232338#*#* - Shows WiFi MAC address A MAC address is a unique identifier that is assigned to each piece of network equipment and allows you to identify each connection point, each network node and deliver data only for correct data transfer and provision of services.

*#*#1472365#*#* - GPS test Nokia C3

*#*#1575#*#* - Another GPS test GPS is good, first of all, because it is accurate (it determines your position to within five meters) and absolutely free (good Americans allow everyone to use their satellites). Of course, you will have to pay for specific navigation programs and maps - but this payment will be a one-time fee, and no subscription to GPS services exists in nature. The bad thing about GPS is that it only works outdoors, and mainly in clear weather - if the sky is cloudy, it’s quite difficult to find the number of satellites needed to work.

*#*#232331#*#* - Bluetooth test Nokia C3

*#*#232337#*# - Shows the Bluetooth device address

*#*#8255#*#* - This code can be used to launch GTalk Service Monitor.

Codes for obtaining information about the firmware version:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate

*#*#1234#*#* - PDA and Phone

*#*#1111#*#* - FTA SW Version

*#*#2222#*#* - FTA HW Version

*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number

Codes for running various factory tests:

*#*#0283#*#* - Packet Loopback

*#*#0*#*#* - LCD test

*#*#0673#*#* OR *#*#0289#*#* - Melody test

*#*#0842#*#* - Device test (Vibration test and BackLight test)

*#*#2663#*#* - Touch screen version

*#*#2664#*#* - touch screen test

*#*#0588#*#* - Proximity sensor test

*#*#3264#*#* - RAM version Nokia C3

STANDARD GSM CODES Nokia C3
These codes, dialed from a GSM phone, are used to enable or disable various standard features and services. Some of them duplicate menu functions, some do not.

Legend:
@ = send button (Handset, OK, YES, Navi)
** = enable or activate
* = active
## = turn off and deactivate
# = inactive

CHANGING PIN CODE Nokia C3
Change PIN 1 **04*oldPIN1*newPIN1*newPIN1#@
Change PIN 2 **042*oldPIN2*newPIN2*newPIN2#@
Unblock PIN 1 **05*PUK*newPIN1*newPIN1#@
Unblock PIN 2 **052*PUK2*newPIN2*newPIN2#@

PUK is a code that must be provided by the operator when purchasing a phone or connecting. If this code is missing, or the wrong PUK is entered ten times, your phone will be completely blocked!

SHOW IMEI Nokia C3
Show IMEI *#06# "IMEI" is a unique serial number flashed into every GSM phone. IMEI consists of 15 digits. The abbreviation “IMEI” stands for “International Mobile Equipment Identifier” (i.e. “International Mobile Equipment Identifier”).

If the code obtained by entering this command and the code on the back cover of the phone do not match, then your phone may be “gray”.

CALL FORWARD Nokia C3
Deactivate all types of forwarding ##002#@
Deactivate all conditional redirects ##004#@
Activate all conditional forwardings **004*phone_number#@

FORWARD ALL CALLS Nokia C3
Deactivate and Disable call forwarding to another number ##21#@
Deactivate call forwarding to another number #21#@
Set a number and activate call forwarding to another number **21*phone_number#@
Activate call forwarding to another number *21#@
Check the status of call forwarding to another number *#21#@

FORWARDING IN CASE OF NO ANSWER TO THE CALL
Activate call forwarding to another number if the subscriber does not answer **61*phone_number#@
Deactivate and turn off call forwarding if the subscriber does not answer ##61#@
Deactivate call forwarding if the subscriber does not answer #61#@
Activate call forwarding if the subscriber does not answer *61#@
Check call forwarding status if the subscriber does not answer *#61#@

FORWARDING IF THE SUBSCRIBER IS OUT OF COVERAGE AREA
Activate call forwarding to another number if the subscriber is outside the coverage area **62*phone_number#@
Activate call forwarding if the subscriber is outside the coverage area *62#@
Deactivate and disable call forwarding if the subscriber is outside the coverage area ##62#@
Deactivate call forwarding if the subscriber is outside the coverage area #62#@
Check forwarding status if the subscriber is outside the coverage area *#62#@

FORWARDING IF THE PHONE IS BUSY
Activate call forwarding to another number if the phone is busy **67*phone_number#@
Activate automatic call forwarding if the phone is busy *67#@
Deactivate and turn off call forwarding if the phone is busy ##67#@
Deactivate call forwarding if the phone is busy #67#@
Check the status of automatic forwarding if the phone is busy *#67#@

SETTING THE NUMBER OF BEEPING BEFORE ACTIVATING FORWARDING
N = 5-30 (seconds)
Set the number of beeps **61*VoiceMail Number**N#@
Cancel previous installation ##61#@

Change call barring password **03*330*oldPassword*newPassword*newPassword#@
Activate barring of all outgoing calls **33*Password#@
Deactivate barring of all outgoing calls #33*Password#@
Check the status of barring all outgoing calls *#33#@

BARRY ALL CALLS Nokia C3
Activate all call barring **330*Password#@
Deactivate barring of all calls #330*Password#@
Check the status of barring all calls *#330*Password#@

BARRYING ALL OUTGOING INTERNATIONAL CALLS Nokia C3
Activate barring of all outgoing international calls **331*Password#@
Deactivate barring of all outgoing international calls #331*Password#@
Check the barring status of all outgoing international calls *#331#@

BARRYING ALL OUTGOING CALLS Nokia C3
Activate barring of all outgoing calls **333*Password#@
Deactivate barring of all outgoing calls #333*Password#@
Check the status of barring all outgoing calls *#333#@

BARRY ALL INCOMING CALLS Nokia C3
Activate barring of all incoming calls **35*PW#@ or **353*Password#@
Deactivate barring of all incoming calls #35*PW#@ or **353*Password#@
Check the barring status of all incoming calls *#35#@ or *#353#@

BARRYING ALL INCOMING CALLS WHEN ROAMING
Activate barring of all incoming calls when roaming **351*Password#@
Deactivate barring of all incoming calls when roaming #351*Password#@
Check the status of barring all incoming calls when roaming *#351#@
Activate call waiting *43#@
Deactivate call waiting #43##@
Check call waiting status *#43#@

SENDING or BANING SENDING YOUR PHONE NUMBER WHEN CALLING
Prevent sending your phone number #30#phone_number@
Allow sending your phone number *30#phone_number@
Check the parcel status of your phone number *#30#

CODES FOR SENDING/BANING NUMBER IDENTIFICATION FOR INCOMING CALLS
Prevent the caller's number from being displayed on your phone *77#
Allow caller ID to be displayed on your phone #77#@
Check the caller number display status on your phone *#77#@

Questions and comments about secret codes for Nokia C3

Ask a question regarding Nokia C3 secret codes

Articles and Lifehacks

Any Nokia mobile device comes with a code that protects it from unauthorized access. What to do if the user forgot security code on nokia?
As a rule, some standard combination is set by default, for example 12345. But what if none of the combinations selected at random suits us? No, of course, there is no need to search and contact the company for advice. Let's try to solve the problem.

How to find a security code for Nokia using IMEI if we have forgotten it?

Today you can find many resources on the Internet that will allow you to select a security code for a Nokia mobile device using the IMEI identifier. One of them is XSMS.com. However, before selecting the code, let’s understand what each of the terms mentioned means.

The unlock code, that is, unlock code, is a specific combination of numbers that will help remove the lock. As already mentioned, it is easy to calculate by IMEI. Regarding the last term, IMEI is an international identifier. In fact, this is an analogue of the passport of our mobile device, since each phone has a unique one. You can find the identifier under the device’s battery, in the warranty card or other documentation. In addition, you can try entering the combination *#06#.

Typically IMEI consists of 15-17 numbers. This combination will be useful, for example, when buying a used phone, since stolen devices are usually included in a special database. The IMEI number in the documentation must match what is indicated under the battery, and so on.

The unlock code is requested if we enter the lock code incorrectly three times. However, this code will not help if we are trying to unblock a mobile operator (in this case, even knowledge will not help), or if we have entered it incorrectly more than five times. In addition, some mobile devices do not support entering an unlock code.

The unlock code is entered into a special field when our device requires it. If the user has forgotten the security code on Nokia, he should know that the unlock code will only work for certain models. You can also find a list of Nokia models online for which this code is useless.

Program for resetting the security code on Nokia if we forgot it

There are special utilities that can also help find a solution to the problem. Among them is the Mynokiatool program. The main thing is to remember that we carry out all work with a mobile device using this software at our own peril and risk. Experts generally do not recommend doing “amateur work”, but instead contact a service center. This is especially true if our phone is still under warranty.

If we still decide to use a special utility, we should read the detailed instructions for resetting a forgotten password. Let's look at this using Mynokiatool as an example. We connect our phone to a PC or laptop and open the installed program. To read a forgotten security code, activate the “Connect” button in the upper left corner. After this, a corresponding notification should appear in the “Log” window (“Phone is connected!”). Select the “Read code” item.

Next step: resetting the read security code. Click “Stuft”, and then select “Reset settings”. We confirm our actions by clicking “OK”. It should be taken into account that this will also reset all user data, and therefore it is recommended to first save all the most important things. Now the security code is again similar to the one that was set by default (12345).