How to connect to wi-fi tablet. Connecting the tablet to the Internet via a WiFi router. Data Sharing Overview

If you have a tablet running Android OS, then most likely it will have a built-in Wi-Fi module. I have never seen a tablet without Wi-Fi, even the cheapest ones Chinese models are equipped with this type of wireless communication.

The instructions will be presented in two parts, first, setting up the modem/router, then connecting the tablet to the point Wi-Fi access. If you have been using this technology for a long time, but just don’t know how to set up Wi-Fi on your tablet, you can skip the first part and proceed straight to the second.

Part 1. Enable Wi-Fi on your modem or router

I assume that you have no idea what this “Wi-Fi” is, how to turn it on and how to use it. If I’m right, then you did the right thing by starting to read the article from here, from the first part. I repeat, if you have everything set up for a long time, you use Wi-Fi on your laptop, then read part 2.

Before use home Wi-Fi on your tablet, you need to enable it on your modem. I hope your modem can create Wi-Fi networks. To make sure of this, read the instructions for the modem or look at its characteristics on the website. Look there for words like “802.11” or “Wi-Fi”. The easiest way to find out is to look for a light bulb on the modem that says “WLAN.” If it is there, then there is Wi-Fi.

Connect to the Internet and in a browser (Opera, Chrome, Firefox, Internet Explorer) open the address https://192.168.1.1.

If you don’t know what to write here, try to find out this information from the person who set up the Internet for you or from the person who sold you the modem. Alternatively, you can contact your Internet provider.

Further actions depend on your modem model. You need to find a menu item with a name like “WLAN” or “Wireless Lan”. Look on the left in the menu. Check the box next to “Active Wireless LAN” or “Enable”. Set the network security type to “WPA2-PSK”. Enter the name of your Wi-Fi network in the “SSID” field and enter the password of your network in the “Pre-Shared Key” field. Click the "Apply" or "Submit" button to save the settings.

But that is not all. Let's go to DHCP settings(this thing somehow gives out IP addresses to everyone who connects to the network). Depending on the modem model, these settings may vary different places. The screenshot shows the possible location of such settings. Although in my Zyxel modem they are hidden along the path Network -> LAN -> DHCP Setup. Enable DHCP if it is disabled by switching the checkbox to Enable. If DHCP is enabled, read the next paragraph. If there are no checkboxes, but there is a list, select the Server item opposite the DHCP item. After turning on, reboot the modem (this can be done either in the modem settings interface, which is where you are now, or simply with a button on the modem).

Part 2. Connecting the tablet via Wi-Fi

All that remains is to connect the tablet to the newly created network. The actions will depend on the version of Android on your tablet. If you have version 4 and higher, the first Wi-Fi item is right in the settings. Turn it on. If you have Android version 3, you also need to go to the settings item wireless connections. And there already turn on Wi-Fi.

After the device thinks, it will show you a list of found networks. Select the network that you created in part 1 (this network will be called the same as you named it in the “SSID” field), or which you already have and to which you have been connecting your laptop for a long time. Next, you will be asked to enter a password for it. Again, enter the password that you specified in the “Pre-Shared Key” field. After all the steps, the tablet should connect to the network, which you will know by the antenna icon that appears next to the clock.

Part 3. Endlessly obtaining an IP address...

The most common problem The message that appears to users when connecting a tablet via Wi-Fi is the constant message “Obtaining an IP address.” It doesn't connect any further. There are several solutions to this problem:

— Rename Wi-Fi network into English. As suggested in the comments, sometimes tablets do not connect to networks whose names contain Russian letters.

— Inclusion DHCP server . How to enable it, read above, in the 1st part of this article at the very end.

— Changing the Wi-Fi network encryption type. You can change the protection type in the settings Wi-Fi security(this is the same place where you set the password and network name). Try setting some other value in the highlighted items. Don't be afraid, you won't damage the modem with your experiments. For the changes to take effect, reboot the modem.

— Manually enter IP addresses and DNS servers in the connection settings on the tablet. When connected to a Wi-Fi network, in the window where you are asked to enter a password, open the menu additional settings. And there select IP Settings -> Custom. In the IP address field, enter your address, it looks like 192.168.1.*** (for example, 192.168.1.128). In the Gateway field, enter 192.168.1.1 or 192.168.0.1 (check with your legal provider). All that remains is to enter DNS, which is different for everyone, but which you can also find out from your Internet provider.

A simple video on connecting an Android tablet to the Internet via Wi-Fi:

Nowadays there is not a single tablet without a Wi-Fi module. The access points themselves are growing like mushrooms. They are found almost everywhere: at home, in cafes, at work. To access the Internet, you need to know how to set up Wi-Fi on your tablet. On this moment There are only three main operating systems in the world: Windows, iOS and Android. The essence of the connection differs slightly.

Connecting a tablet on Windows 8

Microsoft is a very strong player. The fact that Windows 8 OS appeared on the market is very predictable. True, the system does not yet differ in its functionality and number of programs compared to other operating systems. However, the number of models managed by Microsoft is constantly growing.

So, how to enable Wi-Fi on a Windows 8 device? To do this, you need to call up the menu while on the desktop. As you know, in the new operating system, all main menus (even menus of programs adapted for METRO) are called up on the right side of the display. At the bottom of the menu is the taskbar, where you can see the wireless network icon. In the tree of available connections that opens, select the desired network and connect by touching the corresponding "Connect" button. If the network is not public, you will need to enter a key. In order not to repeat the procedure every time, check the “Automatic connection” checkbox.

Connecting iPad

iOS models have always been distinguished by their simplicity. To set up wireless network, you need to go to “Settings”, where you need to enable the “Wi-Fi” module by changing the position of the slider. After a few seconds, the module will find available networks. You need to choose the one you need. Networks can be protected, as evidenced by a lock.

Connecting an Android tablet

Most of the models are running the Android system. To turn on wireless mode, you need to find the “Options” (“Settings”) icon in the main menu of the device, where the very first item is Wi-Fi. We activate the module by pressing the switch. Now you need to click on the “Wi-Fi” inscription itself: a list of networks available for connection will open. Click on the desired network, after which the device will be authenticated and receive an IP address. When connecting, you can check the “Remember this network” checkbox so that the next time the device connects automatically.

How to find out the security key?

Many people do not know their home security key, and when setting up a wireless network, they will have to enter it on the gadget. Finding your key is very easy. To do this, open your browser (Chrome, Internet Explorer) and address bar enter 192.168.1.1 to enter your router settings. When prompted for a login and password, you must enter admin in both fields.

In this article, using the example of HTC Flyer and Apple iPad describes how to set up WiFi on your tablet. The difference between these two devices is the type of operating system installed on them. In one case it is iOS (iPad), and in the other it is Android (Flyer). Hence the difference in connecting to a wireless network.

Before that, on the tablet, let’s find out: “What is this?” This is a wireless technology for transmitting information, which in some cases can operate at speeds of up to 150 Mbit/s. This allows you to easily view almost any page from global web, download files and exchange messages on social networks. Its only drawback is the short distance at which it operates. For most modern routers it is a maximum of 10 meters. But this is quite enough for small office or at home, where alternatives similar technology it simply doesn't exist now.

Router

The first step in getting WiFi on your tablet is connecting and configuring the router. First, we choose a place to install it. This could be a table, a shelf, or even a wall (in which case you will need to hammer a couple of dowels into the wall for fastening). The location should be chosen so that there is an incoming wire from the provider and a 220 V outlet nearby. Next, the first of them is connected to the blue connector on the router. The power supply is installed in a power outlet, and its cord is installed in the socket of the router. At this stage, you cannot do without a desktop PC or laptop. They connect to any of the 4 remaining sockets using a separate cord. Turn it on by pressing the corresponding button. After the router has finished loading, go to its settings from the PC. To do this, launch the browser and enter 192.168.1.1. In response, you will need to enter your username and password, which are specified in the documentation for the router. Then in the section called “Wireless Networks” we set the access point name and password. In this case, you need to select the WPA2 encryption type and perform it automatic reboot. Then the PC turns off and the router is ready for use.

Android

Let's look at the example of Flyer from HTC. The tablet has rather modest technical characteristics, but its price is also affordable. Again, its connection algorithm is universal and can be used on various other devices running this OS. The procedure for setting it up in such a situation is as follows. Go to “Applications\Settings\Wireless Networks”. Here we enable it. At the next stage we return to “Applications”. We find WiFi utility. Let's launch it. Then we do a scan. In the list of found networks we find the one that was specified in the previous step. Let's connect to it. If necessary, enter the password. Next, launch the browser and work with the Internet.

Apple tablets

Now let's look at how to connect the Apple iPad tablet. There are also later modifications, but the algorithm for them remains unchanged. First, go to “Settings” and select WiFi there. Turn on the adapter. Then in the “Select network” list we find the one that we previously specified at the stage. If necessary, enter the access key. Then close “Settings”. We launch the browser and begin to surf the Internet.

Conclusion

This article uses the HTC Flyer and Apple iPad as an example to describe how to set up WiFi on a tablet. There is nothing complicated in this operation, and anyone can handle it without any problems. So you can safely take it and do it.

One of the capabilities that almost all tablets have is an Internet connection: you can learn more about this from the article. Equally important is your device's ability to connect to a Wi-Fi network. It is this point in mastering a new gadget that most often causes the greatest difficulties, and we will dwell on it in more detail.

How to set up Wi-Fi on an Android tablet

In order to set up Wi-Fi on an Android tablet, follow these simple steps:

In the tablet settings, enable wifi receiver. To do this, select “Wireless Networks” in the settings menu, and then click on the “Wi-Fi” line.
After this, a list of wireless networks available for connection should appear on the screen of your tablet. From them, select the one you need to connect to, and the system will prompt you to enter the network password in the appropriate window.

Most often, no further manipulations are required, and you can use your tablet for your own pleasure. However, if there is a need to further configure the connection, follow the instructions below.

To access the network settings settings, hold down its name for a few seconds, and when the system prompts you to select an action for this network, select “Change network.”
Next you will see the settings panel. To configure settings such as gateway, IP address, and DNS server addresses, select Advanced. In the window that opens, enter the data that was provided to you by your Internet provider in the appropriate lines.

As a rule, there is no need to use the last two points indicated, since the Android OS has a function automatic settings networks and determining its parameters.

How to set up Wi-Fi on an iOS tablet

If you still don't know how to make Wi-Fi on your tablet iOS reality, follow these steps:

Open the "Settings" menu and select the "Wi-Fi" line. A window will open, the first line of which will read “Wi-Fi” and a switch. Set the switch to on and your tablet will begin searching for available networks.
When the search is completed, a list will appear below the line available networks, and you will be asked to select one of them to connect to. Select the desired network, enter (if required) the network access key in the window that appears and click “Connect”.
If the connection is successful, a Wi-Fi network signal indicator will appear in the upper left corner. To configure a network, click on the arrow to the right of the network name. You will be taken to the Advanced Settings window where you will be asked to enter the IP Address, Default Gateway, and DNS Address values.

In addition to Wi-Fi connection, many tablets allow connections to the 3G network. To learn more about this, please refer to the article

Despite the exceptional simplicity of the actions, the problem of connecting an Asus tablet to a wireless network is a fairly common problem today. Of course, this article will seem very simple to many (after all, what is there to connect, right?). And for someone it will be very useful and help solve the problem connecting your Asus tablet to Wi-Fi. After all, having picked up their first tablet PC, not everyone can figure out what’s what the first time. But, nevertheless, connecting the tablet to the Internet is very important, because without it it is, in fact, a completely useless thing, like all modern gadgets.

The instructions below are universal for all Asus tablets. But it is also suitable for any other tablet based on Android OS.

So let's get started. You must have an available Wi-Fi network in your home (or wherever you want to connect to the Internet). If it is protected, you should of course know the password for it. Although the network may be open (in this case you do not need to enter a password). But let's get down to business.

To get started, turn on wireless on your tablet. To do this, in the case of Asus tablets, you need to swipe your finger across the screen from top to bottom. The settings panel will open. Click on the wireless network settings icon.

You will see a switch near the Wi-Fi item. Turn it to the “on” position. After some time (usually a few seconds), the device will find available networks, from which you will need to select the appropriate one.
Then, if the network is password protected, a special window will appear in which, accordingly, you need to enter the password. Enter it to connect to Wi-Fi and click the “Connect” button. If you manage to forget the password for your network, you can look it up in the router settings.
By the way, when connecting to a Wi-Fi network on an Asus tablet, the “Connect” button may become inactive even after entering the password. If so, most likely your password is less than 8 characters long. That is, the password must be 8 characters or more long. You can solve this problem simply by changing the password in the router settings.

To see what you are entering there (after all, the password is usually covered with asterisks when entering so that no one can spy on it), you need to check the “Display password” checkbox.

That's all, actually. If you did everything correctly and entered correct password, tablet connect to Wi-Fi.

At the same time, in the list of available networks (which is in the settings), the words “Connected” will appear next to the name of your network. If in the end you receive an authentication error, most likely you entered wrong password wireless network access. Check it and try again.

And on the notification panel at the top an icon will appear that shows the signal strength and two small arrows that “light up” green, when the Internet is used quite intensively.

Any owner of a smartphone or tablet in most cases wants to use absolutely all their capabilities, including connecting to the Internet. In this regard, we have to solve the question of how to connect the tablet to WiFi at home or connect to open or secure networks. To do this, you can use several basic options, which will be discussed.

How to connect a tablet to WiFi: basic methods

It’s no secret that absolutely all modern mobile devices have built-in modules that allow you to connect to wireless networks.

If we consider the question of how to connect a tablet to WiFi, for most devices you can use four main methods:

Connection via
Creating a connection through a distributing laptop or computer.
Using an external modem.
Establishing a connection through the services of a mobile operator.

How to connect a tablet to a WiFi router?

Connecting to wireless networks using a router seems to be the easiest. However, first you should check your router settings regarding automatic network configuration.

To do this, you need to log into the router's web interface by entering the combination 192.168.0.1 (or 1.1 for some router models) in the address bar of any Internet browser. Then you need to go to the DHCP configuration section. Default automatic configuration turned on, but you never know what could happen. Here, the location of the section or tab may differ depending on the router manufacturer. On the desired tab you just need to enable DHCP activation. In this case, you will not have to manually configure the tablet; the IP address will be assigned to the device automatically.

Next, you need to go to the tablet settings and activate the connection to Wi-Fi is normal by dragging the slider to the on position. A few seconds after activation, the built-in module will detect all wireless networks within range, after which all you have to do is select required connection and, if necessary, enter the security key.

In another case, when configuration needs to be done manually (with the router configuration element disabled), you should use the IP address value setting in the range from 192.168.1.2 to 1.254 (or from 0.2 to 0.254 - it all depends on what address the router initially uses for signal distribution).

For the DNS server, you can use either four eights, or two eights and two fours. The subnet mask is standard - four values 255 and a zero at the end.

Connection via laptop

Now let's see how to connect your tablet to WiFi via a laptop. In this case, you first need to configure the laptop so that it turns into a distribution device. Windows tools this, of course, can be done, but many users have to enter the settings network commands in the relevant console causes legitimate difficulties. Therefore, it is better to use the installation of free automated utilities like Connectify or Virtual Router.

From the settings you will only have to enter the name of your network and access password. To connect to the newly created network, the same technique was used that was given to create a connection session through standard routers.

Establishing a connection using a 3G modem

To figure out how to connect your tablet to WiFi in this way, you will first have to purchase a modem compatible with the device and special OTG cable, through which to mobile device you can attach any peripherals. Please note that this method is only suitable for Android devices (unfortunately, Apple devices do not support this technology).

Now you should start setting up. For installation required parameters we enter the data transfer section located in the main settings menu, after which the switch slider mobile traffic switch to the on position. Then we use Extra options(line “More”), select the APN access point. Now all that remains is to add it and enter the parameters received from the provider.

If you figure out how to connect the tablet (WiFi on ByFly, for example), setting the settings is very similar to the method of establishing a connection via a 3G modem. Only in this case, you need to pay attention to the fact that you must first establish a connection for the Wi-Fi module manually. The requested network may be hidden, so you need to use the SSID value in the parameters, select the security type and only then connect to the network.

Using the services of mobile operators

Finally, there is another way to solve the problem of how to connect your tablet to WiFi. Many modern devices support the installation of SIM cards, both on regular smartphones, linked to the operator providing communication services.

Depending on the package, access is provided on a 3G or 4G network. Only in this case the difference is that you can get from the operator standard settings to access the Internet or apply direct access by activating the data transfer module on mobile device(for example, for 3G+ networks). There is no need to configure anything here. The connection will be made automatically. But you need to pay attention to the provided traffic limit, since if it is exceeded, the operator may charge an additional fee.

Instead of a total

As can be seen from the above, none of the the listed methods It should not cause any difficulties when activating the connection. The only exception is setting parameters using Windows systems, but this technique was not specifically considered, since the use of special automated utilities in this regard looks much simpler and more attractive for the average user. In terms of preference for the chosen method, it all depends on the situation. But today there are routers in almost every cafe, so the easiest way to activate the connection is by launching the built-in Wi-Fi module directly on the tablet. If communication is required constantly, you will have to choose a connection through an operator (if installation of a SIM card is supported) or give preference to an external modem, but this costs money.

This article uses the HTC Flyer and Apple iPad as an example to describe how to set up WiFi on a tablet. The difference between these two devices is the type of installed on them operating system. In one case it is iOS (iPad), and in the other it is Android (Flyer). Hence the difference in connecting to a wireless network.

Before that, on the tablet, let’s find out: “What is this?” This wireless technology transmission of information, which in some cases is capable of operating at speeds of up to 150 Mbit/s. This allows you to easily view almost any page from the global web, download files and exchange messages via in social networks. Its only drawback is short distance on which it operates. For most modern routers it is a maximum of 10 meters. But this is quite enough for a small office or home, where an alternative to such technology simply does not exist now.

Router

The first step in getting WiFi on your tablet is connecting and configuring the router. First, we choose a place to install it. This could be a table, a shelf, or even a wall (in which case you will need to hammer a couple of dowels into the wall for fastening). The location should be chosen so that there is an incoming wire from the provider and a 220 V outlet nearby. Next, the first of them is connected to the blue connector on the router. The power supply is installed in a power outlet, and its cord is installed in the socket of the router. At this stage, you cannot do without a desktop PC or laptop. They connect to any of the 4 remaining sockets using a separate cord. Turn it on by pressing the corresponding button. After the router has finished loading, go to its settings from the PC. To do this, launch the browser and enter 192.168.1.1. In response, you will need to enter your username and password, which are specified in the documentation for the router. Then in the section called “Wireless Networks” we set the access point name and password. In this case, you need to select the WPA2 encryption type and automatically reboot it. Then the PC turns off and the router is ready for use.

Android

Let's look at the example of Flyer from HTC. The tablet has quite modest technical characteristics, but its price is also affordable. Again, its connection algorithm is universal and can be used on various other devices running this OS. The procedure for setting it up in such a situation is as follows. Go to “Applications\Settings\Wireless Networks”. Here we enable it. At the next stage we return to “Applications”. Find the WiFi utility. Let's launch it. Then we do a scan. In the list of found networks we find the one that was specified in the previous step. Let's connect to it. If necessary, enter the password. Next, launch the browser and work with the Internet.

Apple tablets

Conclusion

How to connect Wi-Fi on a tablet?

Many people use a tablet for work or entertainment. Therefore, it is very important that this device always has reliable internet. One of the main ways to connect to world wide web Wi-Fi connection remains. Let's talk in more detail about how to connect Wi-Fi on a tablet.

Connecting Wi-Fi on the tablet

To connect a wireless Wi-Fi network on your tablet yourself, go to the menu of this device and select Settings -> Wireless & Networks -> Wi-Fi. This menu has "off" and "on" sliders. With their help you can turn it off or on Wi-Fi module on the tablet.
To turn on the Wi-Fi module on the tablet, click on the “on” button. After this a list will appear available Wi-Fi networks to connect. That is, the tablet will automatically search for wireless networks.
To connect to an available Wi-Fi network, you must first select it. If you see a padlock icon next to the Wi-Fi icon, it means this network password protected. Without it, you will not connect to the wireless network. If there is no such icon, then you can freely connect to the Wi-Fi network.
If you know the password for the Wi-Fi network, enter it and click on the “Connect” button. After clicking the “Connect” button on the tablet, the password verification will begin. If it is entered correctly, the tablet will save it and automatically connect to the Wi-Fi network. Remember that the password for this network is entered once and you do not need to return to the wireless network settings in the future.

After that, you can use the wireless Internet on your tablet.

How to add a Wi-Fi network manually

To connect to a Wi-Fi network manually, follow these steps:

Go to the “Settings” menu -> “Add network”. In the window that opens, specify the network name, password, security protocol (usually WPA/WPA2 PSK) and click on the “Save” button. After that, select the network that you added manually from the list of available Wi-Fi networks.
Check the box next to "Advanced". In the IP Settings section, select Custom. In the window that opens, enter following settings: IP address, DNS, gateway and click on the “Save” button.
Similarly, in the “Proxy server settings” section, in the list that opens, select the “Manual” option, check the “Advanced” box and enter the settings.
After executing the data Wi-Fi action the network will receive the “Connected” status. On the tablet you will see wifi icon of blue color. This will indicate that wireless Internet connected to your tablet and you can use it.

To get more detailed information O wireless connection on your tablet, contact your system administrator.

Connecting a Wi-Fi network in public places

You can also connect wireless Internet on your tablet away from your place of residence. Today, in many bars, restaurants, cafes, museums and shopping centers There are Wi-Fi hotspots. If the wireless network is protected by a password, you can obtain it from the administrator of the establishment. Thus, every visitor to such an institution has the opportunity to take advantage of free internet on your tablet.

Is it safe to use an open Wi-Fi network?

It is also necessary to pay attention to the fact that networks that are not password protected, that is, open ones, can be dangerous for your personal data. Under no circumstances use the Internet banking service through an open Wi-Fi network. When you are connected to the Internet via an open wireless network, it is not advisable to enter your passwords, logins, and other secret information on various sites.