Menu
homeWord

iwatch won't turn on. Apple Watch won't turn on. Apple Watch Sport won't turn on: display replacement

Like any mobile device Apple smart apple watch Watch can be turned on or off, and in some cases it may need to full reboot, and now we will tell you how to do it.

On the side panel there is almost the same button as on the iPhone, iPad or iPod, which is designed to turn the smart watch on and off. Side button Apple Watch can be used for different actions, including access to your friends list and Apple Pay, and in addition to turning it on/off, it also allows you to reboot your smartwatch. Now we will tell you how to turn on, turn off or restart your Apple Watch.

How to turn off Apple Watch

1. Press and hold side button until three sliders appear on the screen.

2. For Apple shutdown Watch: Simply slide the top slider to the right to confirm turning off the watch.

How to turn on Apple Watch

1. Press and hold the Side button until the Apple logo appears on their screen.

2. After a few seconds, the Apple Watch will turn on and you will see the lock screen.

How to Restart Apple Watch

Although Apple smart watch are a wearable device, essentially they are small computer, and any computer, as you know, can sometimes freeze and/or stop responding to any actions. Apple Watch is no exception. If your Apple Watch stops responding to taps on the screen or pressing any button, the simplest and in a fast way the way out of this situation is hard reset, better known as reboot.

1. Press and hold the side button and wheel at the same time Digital Crown.

2. After about 10 seconds, the Apple logo will appear on the screen, then immediately release both buttons.

3. The Apple Watch screen will go dark, and after a few seconds you will see the Apple logo again.

4. A little more time will pass and you will see the lock screen.

What to do if Lately Apple Watch 38 mm does not turn on? Why does it happen that the Apple Watch 38 mm suddenly went out and stopped turning on? Do-it-yourself instructions and repairs are unlikely to help in this situation.

Instructions: If Apple Watch 38 mm won't turn on, there may be several reasons for the breakdown.

  1. Try rebooting your watch first;
  2. One of the reasons for the malfunction may be if the battery is faulty. It will have to be replaced;
  3. If the power controller fails, it must be replaced;
  4. The power controller burned out due to a power outage. It, like all previous components, will need to be changed;
  5. If the device does not turn on, but the connector is still alive, the reason may be in the wiring or board. This most often happens after getting wet.

Bottom line: Options 1 and 2 can be done at home yourself, but if the problem is different, it is better to contact a specialist.

We have provided you with 2 options for solving the problem being analyzed, and you can decide which one to choose.

Repair in service Apple Center Telemama

DIY repair

Our advantages

  1. Spare parts. To keep your equipment operating for a long time, we install high-quality parts.
  2. Price. We purchase goods in bulk, this is the only way you can buy spare parts at low prices.
  3. Repair time. To replace the display, speakers, power connector, etc. it takes about twenty minutes. When the device has a complex malfunction, we will make a diagnosis; it will take about twenty minutes.
  4. Guarantee. We always issue it for one year warranty card.

When your Apple Watch 38 mm won't turn on, turn to real professionals for help. Why? Such a malfunction is complex and self-repair you may damage other parts. Call the courier service to deliver the equipment to our service center they will need a minimum of time. You can always come to us yourself, and we will fix this breakdown in front of you.

Your device has the opportunity to undergo free diagnostics from us. We will be able to begin repairing equipment only after you agree on the price for repairs with our specialists. We eliminate all malfunctions with high quality and have extensive experience. They install original parts and upon completion of all work will give you a long warranty.

We suggest you come to us and pick up the equipment yourself or use courier delivery. He will bring the watch to your home in minimum terms. Don't forget to pick up the one-year warranty card from the courier as well. You can repair your device with us in the future at a discount. Let your friends tell you the order number, and they will also be given a discount.

In the specialized Telemama service center you have the opportunity to restore your device. Our technicians will be able to repair your equipment efficiently, advise you on how to fix the breakdown yourself, and also buy excellent quality parts here for cheap. You can view all prices by viewing our price list. The cost for parts and services offered is stated in an accessible and transparent manner. Only after the device has passed diagnostics can you buy components and change them yourself. Make sure that Telemama offers discounts to all of our regular customers, so they don’t need to wait for them. We often host various promotions.



New one on sale modern gadget from Apple - iWatch smart watch. During the operation of any electronic mechanism, the user is faced with the question “How to reboot them?” It did not bypass the Apple Watch either.

The next new product from a world-famous company will, of course, ensure maximum uninterrupted operation of the gadget, but it is still necessary to know everything about the device - from before.

Apple Watch operation progress

This procedure does not require any special skills or extra effort, since the device is designed as simply as possible.

What does the gadget consist of?

There are two keys on the iWatch body, with which you can fully control the operation of the device; the functionality of the buttons is similar to that of the iPhone:

  1. The Side key does the same thing as the Power button on the iPhone.
  2. Pressing the second key will respond to the “Home” command, but it’s not really a button—it’s a digital crown called the “Digital Crown.”

Master the procedure reboot Apple Watch It’s not difficult, the main thing is to repeat the algorithm of actions several times so that it is deposited in your memory. Restarting iWatch can be done in two ways.

Method one (completely disabling Apple Watch)

  1. Press the “Power” button and do not release it for several seconds until a menu appears with the available keys:
    • "Switch off";
    • "Eco mode";
    • “Block.”
  2. Select “Turn Off” from the menu on the Apple Watch and wait complete shutdown devices.
  3. Press again side key and release only when the company logo appears on the screen.

 Photo: iWatch smart watch overload

Method two, how to properly reboot your Apple Watch

  1. Press the “Digital Crown” and at the same time press the “Power” key.
    We do not release them for approximately 10 seconds.
  2. As soon as the logo image appears on the screen, the reboot is complete and you can release the keys.

Instead of a conclusion

There are no secrets or special tricks in the question of how to reset or restart Apple Watch, simply doesn't exist.

My Apple Watch is stuck on an apple. After updating watchOS4.3, apple watch will not turn on again, the Apple logo will appear and will not go past the Apple logo."

Have you ever encountered a situation where your Apple Watch hangs on the apple after the Watch OS 4.3 update, or simply freezes and does not respond to buttons, or is stuck in an endless loop and will not turn on? Just like the iPhone, if your Apple Watch doesn't work or something goes wrong. For iPhone attached to Apple logo, we usually reboot or restore it from using iTunes. But what can we do to fix the problem of Apple Watch being turned into a “brick”? Don't worry! Here are the answers.

Top 4 Ways to Fix Apple Watch Problems

When you are trying to solve a problem, the first thing you need to do is make sure that your Apple Watch has enough power. It's best to leave it on charge for a few hours before trying the following methods.

If your Apple Watch is frozen and unresponsive, you can: forced reboot. This is done as follows.

First way

1. Press the Side button and the Digital Crown at the same time for at least 10 seconds.

2. Release both buttons until the Apple logo appears

Second way

1. Press and hold the side button until Power menu Off.

2. Swipe the Power Off menu to turn off the watch.

3. Press and hold the Side button until the Apple logo appears.


If you restart your Apple Watch and see the Apple logo, but then the screen goes blank again and you hear a description of what's on the screen, it may have accidentally entered Screen Curtain accessibility mode.

To exit Screen Curtain accessibility mode, do the following: Open Apple app Watch on your iPhone and tap General > Accessibility > Voice Over and turn off Screen Curtain and turn off VoiceOver.

Tip 4: Fix Apple Watch Stuck on Apple Logo with Tenorshare ReiBoot

For Mac/Windows, the best software for correction of all types iOS problems, which are now supported to fix Apple Watch (watchOS 4/3/2) stuck on Apple logo and won't turn on. ReiBoot has two repair modes.

First, you can use the first repair method: one click to put your Apple Watch into recovery mode. This method restore your device without iTunes.

How to enter recovery mode?

Step 1: Download the program and connect your device to your computer with via USB– cable.


Step 2: The tool will access the device, then the “Enter Recovery Mode” button will be displayed. Click this button and start entering recovery mode.


Step 3: Via Apple minute The Watch entered recovery mode successfully. Your device displays a logo USB iTunes. Then click the “Exit Recovery Mode” button to restart your device.


Usually, recovery mode can fix few problems such as stuck on Apple logo and stuck on update.

If the above method did not solve your problem, just do next steps:

1. Launch Tenorshare ReiBoot for Mac after installation. Connect the program to your Mac via Bluetooth, this program will recognize your device automatically. Click "Solve All iOS Freezes" and then go to the recovery page, click "Repair Now" to continue.

2. Tenorshare ReiBoot Pro offers firmware package for iOS device. Your device will be updated to latest version after recovery. Click the "Download" button and start downloading software package online. If you have problems downloading, click “Copy” and download through your browser.


3. Once the firmware package is successfully downloaded, click "Fix Now" to repair your Apple Watch. After the repair, your watch will restart normally.


4. When the restore is complete, your iOS device turns on. The data and settings are saved and the problem is fixed.


ReiBoot Review

Another method: If your Apple Watch randomly turns off, becomes unresponsive, or crashes

If your watch has other problems, such as your Apple Watch randomly turning off, not responding, or crashing. In addition to the above method, you can open Watch app on your iPhone, go to My Watch > General > Software Update and check to see if it needs an update.

Crashes can be caused by a specific application. If you notice a connection between unstable work devices and frequent use specific application, remove this program. Open the Watch app on your iPhone, select problematic program and turn off its display in the clock.

Sometimes full reset helps to deal with such problems. On your watch, go to Settings > General > Reset > Erase all content and settings. After this, you will have to reset the clock.

Conclusion

I hope these tips will help you fix the Apple Watch stuck on Apple logo problem. If you have any other fixes for this issue, please share it with us and other readers on the comment site.

If your iOS devices there are other problems, for example, or iTunes crash when synchronizing/updating/restoring the device, Tenorshare ReiBoot can solve all these problems, This one cheap program compared to its competitors.

Since smart watches appeared on the market apple company they have become loved by many users. It's not just a watch, it's also an accessory. Functionality The devices are so large that it can be called a small smartphone, only on the wrist. But even Apple gadgets prone to breakdowns. What to do if the watch does not turn on?

If your gadget doesn't turn on, don't panic. Common cause The reason why Apple Watch does not respond to commands at all is due to a low battery. Unfortunately, the battery is theirs weakness. The manufacturer claims that the device can easily work for 2 - 3 years. If we translate this time into the number of charge-discharge cycles, then it is about 1000 times. But there are always factors that can reduce this number.

The reason for not turning on may be a system malfunction. In such a situation, a flashing of the gadget is required. After it has passed, it is better to disconnect the connection with the phone and re-establish it. Another reason could be a broken display. Display repair difficult task and it is better to carry it out only by specialists. Contact the service center.

Charging problems

If this is your first time when the battery runs out, then put the watch on charge. You can know that the gadget is charging by the appearance of a green lightning bolt (small icon) on the display. If the watch is not completely discharged, this icon will glow red. If you see just a black display with no images and no indicator icon, let the device charge for at least 30 minutes. No display due to complete discharge battery

If there is no replenishment of the charge or a message appears stating that the battery cannot be recharged using this charger, do the following:

  • Check if it is inserted all the way charging cord from magnetic charging into the USB connector on the adapter. Make sure the adapter is fully plugged into the outlet. If not, adjust the connection until it makes full contact.
  • Make sure that the outlet to which the adapter is connected is working and there is access to electricity in the room (check the light by turning the switch on and off). If the socket is not working properly, connect Charger to another.
  • Make sure that the charger for the Apple Watch and the adapter for it are included with the gadget. The use of non-original accessories may cause malfunctions of the device. Check the cord for kinks, damage or twists. Their presence can block the flow of electricity. If damage is found, replace the cable. Make sure there is no oxidation on the connecting elements. If there is one, carefully remove it.
  • Remove the plastic protective film from the charging tablet. It is glued on both sides.
  • Remove dirt from the back of the watch and from the magnetic tablet.
  • Reboot your gadget. To do this, press and hold two buttons: the side button and the Digital Crown wheel. It will take about 10 seconds until the “apple” logo appears on the display. After this, apply the back of the watch to the tablet, it will lie flat on its own. If you put the watch on the wrong side, it will “resist” contact with the tablet thanks to magnets. If there is no result, try the next step.
  • Try connecting the watch to the charger using a different adapter and USB cable or use another "pill". Wait a little, if the battery is completely discharged, the device needs time to replenish the minimum energy level of the battery. If there is still no response from the watch, contact a service center for diagnostics and subsequent repairs.

Wireless charging for Apple Watch

If, after connecting another charger, it turns out that your charger is not working properly, it’s time to buy a replacement. Apple Company released wireless charging for Watch. The advantage is, first of all, that this is a device from the same manufacturer. A pair will work perfectly. The device can replenish the battery charge from 0% to 60% within 30 minutes. Wireless transmission carried out via the open Qi standard.

The battery capacity of the charging device is 200 mAh. In 1 hour 30 minutes you can replenish your energy reserves up to 80%. Within two and a half hours the battery will be fully charged. Exterior design minimalist and ergonomic. This product will find a place in any corner. The shape is round, there is a thinning around the circle. White color.

Stations for recharging watches and phones

Below we will highlight some docking stations designed to charge your watch and phone at the same time. It’s very convenient when you can charge both gadgets on your nightstand at once.

Studio Neat Material Dock

This docking station is released by Studio Neat. The reputation of this company among users is very good, it is famous for its exclusive accessories. The station's construction includes walnut and balsa wood. The second material is used for the supporting parts. There is a place for a watch in front of a place for a smartphone. This allows the structure to make the most efficient use of space.

The back panel hides both cables for charging devices. There is a lock at the base that ensures a stable position of the entire structure. You can be sure that your devices are safe. Another advantage is the ability to tune in different type charging. The fit of the gadgets is adjustable; you don’t have to worry that one of the gadgets won’t fit in thickness.

The clamp provides a strong attachment to the surface while you remove or place the gadget in the station. The disadvantage of the station is that it is not included in the kit charging cables for connection and the need to assemble the structure.

FUZ Designs EverDock

The company does not have a docking station directly for watches and iPhones. But, the EverDock accessory supports compatibility with Apple watches. You can purchase a watch holder separately. It is attached to the smartphone seat. This device is perfect for another gadget, for example, a tablet. Then you can use EverDock Duo . This product is price category much cheaper than the docking station described above.

The design is equipped with silicone inserts. It is secured with a lock, so you don’t have to worry about the safety of your devices. Appearance The design matches perfectly with Apple devices. The housing is made of aluminum, which allows for even greater integration of devices. The disadvantage of the station is that you will have to assemble it yourself. But don't worry about it, the kit comes with clear instructions.

Belkin PowerHouse

Belkin products are perfectly adapted to Apple devices. One of the advantages over the two stations described above is that the kit already includes the necessary cables for recharging. There is also everything necessary for switching.

The kit includes a cord and a charging module. You will not spend much time installing the structure. Wires sticking out in all directions won’t spoil the picture here, they simply don’t exist. A single cable, 1.5 meters long, provides power connection. The appearance of the product is beautiful, ergonomic, and goes well with chargeable gadgets.

The gadgets are arranged so that you can see them at the same time. In the first two products they were located one after another, here next to each other. The product does not have a special base lock, but it is quite heavy and stable. Don't worry, it won't tip over. The cost of the product is a little steep for the average buyer. But you won’t have to spend extra money on buying cables and a holder.

There are many stores in Moscow where you can buy such docking stations. If your place of residence is the Moscow region, then branded stores are also at your fingertips. Although many have been buying goods online through electronic stores for a long time.