When pairing with an apple watch. Can I use my iPad or iPod with my Apple Watch? How to quickly reboot an electronic device

(or create a pair with another iPhone), then you will certainly be faced with the need to unpair the device from the iPhone (break the pair). This is very easy to do: you just need to perform a series of simple steps, and you can do this even without a smartphone.

In contact with

Untie Apple Watch You may also need it from your iPhone if one of your gadgets malfunctions.

How to unpair (unpair) an Apple Watch from an iPhone if both devices are in front of you - method 1

1 . Place both gadgets next to each other;

2 . Open on smartphone Apple app Watch;

3 . In the window that opens, at the bottom, there will be a menu “ My watch"—you should click on it;

4 . After this, click on the item “ Apple Watch", on the next screen you need to click on "i".

5 . By clicking on the " Unpair Apple Watch", you should confirm the cancellation of device synchronization, after which all data about the watch will be deleted from the communicator.

How to unpair (unpair) Apple Watch without an iPhone - method 2

It is possible to unlink the watch from the smartphone, even if both devices are not next to each other (for example, if the iPhone is lost). To do this, go to the application " Settings" on Apple Watch (gear icon), go from there to the " section Basic", select menu " Reset" and in it click on the item " Erase all content».

This action will reset the Apple Watch to factory settings (all data will be erased) and will also unpair the existing pair with the iPhone.

How to unpair (unpair) an Apple Watch from an iPhone if the watch has a passcode and you have forgotten it

There is a method Apple decoupling Watch from iPhone, even if the watch had a passcode that you accidentally forgot. For this:

1 . Place Apple Watch on charge.

2 . Press and hold side button before the slider appears Off.

3 . Press firmly on the slider Off and swipe up, after which a button will appear on the watch screen Erase content and settings.

4 . Click on the button Erase content and settings and confirm the action. The watch will be reset to factory settings (all data will be deleted) except that Apple The Watch will be disconnected from the iPhone.

After purchasing a smart watch from Apple, you need to carry out the procedure initial setup, which takes 10-30 minutes depending on the amount of content downloaded to the device. Step-by-step instruction with explanations for setting up Apple Watch is given below.

In contact with

To set up an Apple Watch (any version) you need presence of iPhone 5 or newer Apple smartphones installed or newer. You can find out the firmware version on your iPhone by going to the application Settings and further along the way Basic → About this device → Version.

Note: The order and list of parameters offered when setting up an Apple Watch may differ depending on the model (generation) of the device.

Most of Apple settings Watch is made on iPhone.

How to set up Apple Watch: instructions

Enabling, setting language and region

1. On your watch, press (press and hold) the side button until the Apple logo appears. The first launch may take about a minute.

2. Once turned on, a screen will appear asking you to place apple watch Watch nearby from iPhone.

3. In the menu that appears, first select your language and then your region.

Pairing an Apple Watch with an iPhone

4. On the next screen you will be asked to pair (set up synchronization) with your iPhone. Click on the button Create a pair".

5. Make sure Bluetooth is turned on on your iPhone.

6. On iPhone, launch Watch app and press the button Create a pair, then point the smartphone camera at the watch (align the viewfinder that appears with the watch) or select the setting manually.

7. If you choose to manually pair, a six-digit number will appear on your watch that you must enter on your iPhone.

8. The following buttons will appear on the iPhone: Restore from backup copy (if you have previously synced your iPhone with Apple Watch) and Set up as new Apple Watch. Select the desired option to continue setting up your smartwatch.

9. The next screen will ask you to select the hand you want to wear your Apple Watch on.

10.Press the button Accept in the lower right corner to agree with Apple Terms and Conditions.

Entering your Apple ID and setting up security

11. Enter your Apple ID password (which you use in iCloud section on iPhone) or skip this step.

12. Select whether you want to track your workout routes.

13. Choose whether you want to share insights from your watch usage data with Apple to improve products and services.

14. Click OK to start General settings.

15. Add or refuse to create a passcode. When choosing an option Add passcode, on the Apple Watch screen you will need to enter the desired combination of numbers.

Setting up the Healthy Heart feature

17. Set up notifications for irregular heart rhythms. The Apple Watch allows you to notify the user if you suspect an arrhythmia.

Setting up an activity

18. Customize Activity(you can skip this step and configure it later). The activity program helps to lead more healthy image life, encouraging you to sit less, move more, and exercise daily.

19. Specify Daily mobility goal. Set your daily calorie count for your mobility goal based on your actual or desired level of physical activity. When finished, press the button Set a mobility goal.

Phones and others smart gadgets have long and firmly entered into daily life. This review will be especially interesting for fans Apple technology. It is dedicated to one of the most popular models among smart watches. Let's look at how to use the Apple watch and a few basic points related to the settings, how to connect the Apple watch to the iPhone, unpair it, and more.

Things to consider

Some gadgets are quite easy to use and do not need instructions in Russian. The interface is friendly and everything is intuitive. But not in in this case. Probably everyone knows the fear when using an expensive thing and studying the instruction manual for a long time. To understand the Apple Watch, a few minutes is not enough. The device may be very discharged and additional time will be required.

First start

First minutes. The box is unpacked, the user has instructions in Russian, magnetic charging, and what next? Before using the gadget for the first time, it is strongly recommended to charge the battery. This guarantees its long-term performance in the future.

The very first launch lasts more than a minute. You shouldn’t scold the Yabloko developers too much. The device is the first of its kind. The device itself is very small, so it does not contain powerful hardware. In the future, the clock will start much faster.

Inclusion

How to turn on apple watch? To do this, you just need to click the side button on the sidebar

Activation

Activation occurs when the user raises his hand to look at the watch.

Settings

How to set up apple watch correctly? The setting includes the following items:

The watch battery must be fully charged;
Selecting a language and installing the application;
Wrist selection;
Configuring security settings;
Installing applications manually or in automatic batch mode
Customizing watch faces
View device information;
Regulation of trackers and notifications;
Music Configuration
Work organization.

Automatic synchronization

How to link a watch to an iPhone? Synchronization of Apple watches with iPhone is carried out in automatic mode. For this:

Application icons are located on the screen. Select "Apple watch"
To start synchronization, click on “Start pairing” on both devices
The yellow iPhone video finder should be combined with the animation on the watch display
As soon as the pairing is completed, a notification about the completion of the operation will appear on the iPhone screen. The user needs to click on the “Set up as new Apple watch” button
The system will ask on which hand the owner plans to wear the watch, select one of two options
Next you need to agree to the terms and conditions of use
Enter data from account"Apple" (username and password)
The system will provide information about geolocation services. Read it and click "OK"
Repeat the steps after getting acquainted with the voice assistant “Siri”
After this, diagnostic information will appear on the display.
Now you need to enter a 4 or 7-digit watch password
The system will offer to configure simultaneous unlocking of devices
Can choose automatic installation applications, or install them yourself later
After completing all the steps, on the iPhone a notification will come about the completion of the pairing.

Pairing

How to set up apple watch with iPhone? The pair can be created by the user. How to do it manually apple sync watch from iphone? I can imagine how much anxiety this question causes. First things first.

Creating a pair is performed in several steps:

As in the first case, you need to click on the application icon
Tap the “start pairing” button
The option will appear at the bottom of the display manual installation. Select it and click on the button with the “i” icon
After the iPhone “sees” the clock, repeat the steps from the fourth step of the previous installation option
When pairing, both devices must be close to each other

Couple breakup

If you need to break a pair:

The devices must be close to each other;
Go to “my watch”, select the model and mark the letter i;
Break the pair.

If one of the devices is far away

Go to the clock settings;
Selecting the main ones;
Click on reset.

How to connect to a computer

How to connect apple watch to computer:

Under the removable strap there is a port through which you can connect to a PC using a cable.

If the clock does not turn on

Some users are concerned with the question of what to do if they can’t turn on the watch? In most cases, they simply require charging. If you still cannot turn on the gadget after a long time, contact the supplier.

Connecting to iPad

Connecting an iPad to an Apple Watch is no different from an iPhone.

A complete computer on your wrist. This small device He can do a lot and his capabilities are constantly expanding. Below you will find a small list of tips and information that will be useful when getting started with Apple watches.

Connecting Apple Watch to iPhone

First, check if Bluetooth is turned on. Connect the watch to the mains to recharge. Turn on your Apple Watch (press and hold the side button under the wheel Digital Crown until the Apple logo appears). Select interface language Apple Watch.

To pair your watch and phone:

Click “Start pairing”;
Point your phone camera at your watch to apple display Watch got into appeared on iPhone screen yellow outline;
The watch will connect to the iPhone and you will continue to either set up the watch as new (or restore a copy from a backup if you have already used the watch before and made backup copies);
Choose which wrist you will wear the watch on;
Agree to the iTunes terms of use;
Enter your Apple ID;
Click “Ok” on the next 3 pages with information about location services, “Siri” and diagnostics;
Set a password. The password must be specified on the Apple Watch;
Specify whether you want the watch to be unlocked simultaneously with the iPhone;
Choose how you want to install applications. If the apps on your iPhone have watch versions, they can all be installed automatically, or you can later install just the apps you need yourself;
Wait while the devices synchronize.

How to control Apple Watch

Apple Watch is controlled using one physical button, “Digital Crown” wheel, touch screen And voice assistant"Siri"

The button is used to open the Friends application and to turn the watch on/off. The Digital Crown is like a home button. Pressing the wheel returns to main screen, double tap returns to last running application, and rotating the Digital Crown changes the scale.

Apple Watch steel the first Apple device to feature a screen that supports Force Touch technology. This means that in addition to the usual touches and swipes (smooth movements of fingers across the screen), the watch understands the pressure applied. Depending on how strong the touch was, the watch reacts differently.

It will help you send a message, call, add a meeting to your calendar and much more. To launch Siri, you need to hold down the Digital Crown.

Almost all device settings can be done using the Apple Watch app on your iPhone.

Shutdown/restart Apple Watch

To turn off the clock:

Press and hold the side button until the menu appears;
Select required action: Turn off, save energy or lock.

Important! If you select the energy saving mode, you can exit it only when connected to the charger.

If the device freezes and does not respond to your actions, hold down the side button and Digital Crown at the same time until the Apple logo appears.

How to take a screenshot

To take a photo Apple screen Watch:

Hold the side button;
Press and release the Digital Crown.

After this manipulation, a white flash will appear on the watch screen and a shutter sound will sound, and the finished screenshot will be added to your iPhone’s Camera Roll.

Installing and uninstalling applications

Adding an application to your watch can be divided into 2 stages: download and installation.

For loading:

Open the Apple Watch app on your iPhone;
Go to the “Selection” tab;
Find the application you need and download it, as you usually do with iPhone applications;

For installation:

Open the Apple Watch app on your iPhone;
In the “My Watch” tab, scroll down the list to the application you need;
Click on the application name;
In the menu that opens, activate the “Show application on Apple Watch” option;
Confirm the installation of the application on your watch.

To remove the program, you need to turn off the “Show application on Apple Watch” option or use a method familiar to everyone from working with iPhone. Hold your finger on your working finger for a few seconds Apple table Watch, when all the icons start shaking, click on the cross next to the application to remove it.

Changing the appearance of the watch face

To replace and customize the dial, do the following:

Make a strong press on the installed dial;
Use swipes to select the watch face you want.

If you want to further customize your watch face, click “Customize.” The dial settings menu consists of 3 pages: detail, color, additional information.
Swipe left or right to move between pages, and use the Digital Crown to make adjustments/changes;
Once setup is complete, click on “Digital Crown”.

You are the proud owner modern gadget but don't know how to turn on your Apple Watch? Then this information is just for you!

Turn on iWatch

Before you turn on your purchase for the first time, you need to put the watch on charge and leave it alone for a couple of hours so that it is fully charged. After all, this will guarantee long-term battery life.

The first acquaintance with a smart watch is a rather exciting moment. The first activation of the Apple Watch may be a little disappointing for some fans of the legendary company's gadgets. This is due to the fact that the time allotted for starting the device is a little more than one minute.

Such slow speed- this is a nuance that can be treated leniently, since such a miracle of technology is the first of its kind among Apple products. Exactly the first start of the smartwatch is 1 minute and 10 seconds.

It is necessary to understand that such a small device, which is the first-born of its generation, could not fit powerful iron. Moreover, only the first launch of the gadget takes such time, and for ordinary users in the future this moment will be reduced to “no”.

How to start iWatch?

After unpacking the watch and visual inspection they should be put into action, that is,

On the right side of the gadget, under the round button, there is a power button;
after pressing it, a characteristic icon will appear on the screen Apple;
If the image will be dim at first, you should not be afraid of this;
do not press anything until the gadget prompts you to select a language.

Photo: Selecting a language on Apple Watch After 1 minute and 10 seconds, you can proceed to (5th or newer model).

Pairing iWatch and iPhone

First, make sure that both devices are turned on and active on your phone:

Internet (mobile or).

Devices should be located close to each other. You need to open it on your phone iWatch app.

Turning on the Apple Watch for the first time activates synchronization between devices, so the “Create a pair” request will appear on the watch screen and, having responded positively to it, the same manipulations should be carried out on the smartphone.

Then the phone camera is pointed at the device screen, a few seconds of animation - and the pair is created. When wondering how to turn on the Apple Watch for the first time, you need to know the following points that arise when synchronizing with a smartphone:

the screen will display a request to select the hand on which the Smart Clock will be worn;
then you enter your Apple ID password. “Activation lock” will be displayed if the “” service is installed on the phone;
everything done on the smartphone will be automatically transferred to the watch. Therefore, it is recommended to double-check them;
then it is created, which can consist of either four digits (short password) or more(long password). You should decide on such a setting as telephone or vice versa;
App synchronization: By clicking “Later”, only messages, mail and contacts are synchronized.

The whole process does not take much time.

Why won't my iWatch turn on?

Common problem with iWatch not turning on

What to do if your Apple Watch won't turn on? There can be several reasons for this, the most common being a dead battery. To rule out another problem:

Connect your device to charger.
Try turning it on by pressing and holding side keys.
In the case where the problem is really in the battery, let the battery charge fully, and then use the watch.

If, after these steps, the iWatch does not turn on, perhaps the reason lies in a system glitch. Then a reboot is required. Although this wrist accessory is enough small size, it is a mini-computer and, like any system, can sometimes fail.
How to turn on Apple Watch? To reboot them, you need to press the side button and the Digital Crown at the same time for ten seconds. Don't worry, this operation will not lead to loss of settings and data.

Let's look at other problems that may cause your iWatch not to turn on.

How to solve a problem?

The most effective ways troubleshooting:

contact a consultant technical support Apple company;
take your watch to their support center.

As already mentioned, the watch can simply run out of charge. Charge them before doing anything. Check:

State charger.
Is the power adapter plugged in?
Is the cable coming out?
Are the connector in the watch and the charger dirty?
Try charging using a different cable and adapter.

Some easy troubleshooting tips

Some simple ways Troubleshooting steps are listed below:

Dry your Apple Watch.
Replace the charger.
Perform a forced reboot of the gadget (this is done by simultaneously pressing and holding the side button and the Digital Crown for ten seconds).

If after execution forced reboot The “Apple” logo will appear - the device is working.

Instead of a conclusion

Enabling Apple Watch can cause problems if the battery is dead and the charger is broken. When you charge the accessory, make sure that the cord and unit are in good condition.