Windows 7 64 bit system optimizer. The main signs of a slow computer. Install a new BIOS and check the software is up to date

Unfortunately, inattention to the performance of a personal computer in most cases reduces it to nothing, which, of course, affects the performance and functionality of the device. The quality of work and the correct execution of all processes on a computer depend on the degree of clutter with foreign objects. You can solve the performance problem by optimizing Windows 7 using special cleaning programs.

Performance as it is

Productivity is the speed of information processed by a computer in a certain unit of time. And the higher this speed, the correspondingly higher the productivity.

Main signs of a slow computer

Main features slow work computer are: long time to turn on and off the computer, suspicious long startup programs and applications, delayed response to cursor movement and clicking, as well as other signs.

What affects the performance of a computer and laptop

The following factors affect computer performance:

• incompatibility of computer software, programs, games, operating system with PC components;
• the presence of extraneous, unnecessary files;
• cooler failure or poor heat dissipation from the central parts of the computer;
• in many cases the cause is a conflict between programs: installing two antiviruses at the same time or incompatible drivers it confirms.
• errors in setting up the operating system and/or incorrect use of it;
• BIOS malfunction;
• malware infection;

Basic methods for optimizing the OS and increasing PC performance

Cleaning your hard drive to improve Windows performance

The most common way to optimize the operating system is to clean the hard drive of unnecessary and even harmful files. These may be copies, reports active programs, temporary files, browser cache, etc. Paths where you can manually delete temporary files:

• C:\Users\Username\AppData\Local\Temp;
• C:\Windows\Temp;
• C:\Users\All Users/TEMP;
• C:\Users\Default\AppData\Local\Temp;
• recent documents: C:\Users\username\AppData\Roaming\Microsoft\Windows\Recent\;
• temporary internet files: C:\Users\username\AppData\Local\Microsoft\Windows\Temporary Internet Files\.

To clean the disk from temporary and unused files also applies standard tool"Disk Cleanup" from Windows OS. Click “Start” - “All Programs” - “Accessories” - “System Tools”. Then we launch the program. We select the disk we need, remove/place the indicators opposite exactly those categories of files that need to be cleaned (deleted), and proceed to clean it.

Setting up automatic HDD defragmentation

Another convenient way System optimization is hard drive defragmentation. This procedure makes it possible to increase the speed of access to files and, as a result, increase the speed of the system. Ultimately, everything depends on the level of disk fragmentation: with a high value, performance increases significantly.

The defragmentation program is located: “Start” - “All Programs” - “Accessories” - “System Tools”. And then select “Disk Defragmentation”. Specify the desired disk to defragment. In addition, the program analyzes the disk and can tell the user whether defragmentation is needed at the moment. And if desired, the user sets a schedule according to which this procedure will be automatically performed.

Visual effects

The system interface includes many visual effects that serve to create presentability, uniqueness and, in a sense, style in the appearance of the system. However, such effects have a negative impact on productivity, because occupy large volume random access memory and sometimes slow down work. And many effects are subtle and therefore completely unnecessary.

In order to optimize visual effects, you should open “Explorer”, then select “ Extra options systems." In the “Performance” tab, select “Options”. Now the user has a menu where he can control the operation of visual effects.

Autoload

The performance of the computer at startup is often affected by programs in startup. You don't need special programs or tools to clean startup. This can be done using operating system tools. In the command line (the command line is called by pressing the WIN+R keys) enter MSCONFIG command. So, we will launch the system configuration. Go to the “Startup” item. In the list of programs that appears, you can see programs that relate to the quick launch of defragmenters, players, etc. But understanding them is not so easy, but intuitively disabling any program from this list will not have significant consequences.

If operating systems such as Windows 7.8 and later are installed on your PC, then the job of cleaning startup is simplified. The developers have added the “Startup” item separately in the Task Manager. The task manager opens with the key combination Ctrl+Alt+Delete. The Task Manager field shows which processes are running right now, the names and states of programs, along with their impact on performance central processor and hard drive. Here you can disable autoloading.

The step-by-step sequence of actions when cleaning through the registry looks like this:

• open the registry editor;
• open the registry tree and go to the link HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion;
• pay attention to two sections: “Run Once” and “Run” (the first subparagraph indicates programs that should be run only once, and the second - programs for autorun);
• carefully track the launch paths, names and keys that are available inside some programs;
• remove unnecessary programs;
• the same thing should be repeated with the HKEY_CURRENT_USER registry branch;

It is also worth paying attention to the fact that when you disable any program in startup (in search of a malicious adware virus), it is quite possible to disable the antivirus. This will put the system at even greater risk.

Disabling Windows Services

Many Windows services are rarely used and play almost no role in operation. Accordingly, they simply interfere with the work of other, more important user programs. However, disabling them, if necessary, will increase the performance of your computer minimally, especially on devices with a lot of RAM.

When performing any system optimization procedures, it is recommended to create a system restore point to avoid the consequences of any unforeseen situations (for example, deleting necessary programs or incorrectly disabling/enabling operating system services).

To disable system services, go to: “Start” -> “Control Panel” -> (Changing the view in the control panel menu to “Small icons”), select the “Administration” tab, then “Services”. Then a list of services will appear, and to disable a service, double-click on it (the management menu for that service will open first). In the “Startup Type” pop-up tab, select “Manual” and “Stop”. Save the changes. It is worth understanding that accidentally disabling a necessary system service can lead to unstable operation. Be extremely careful when working with this option!

Tweakers

Tweaker - interactive menu system tools in one program. Tweakers provide rights to control the most powerful and fundamental options for changing system parameters, so you need to work with them with extreme caution.

A tweaker program, as a rule, can cause system errors (and serious ones), so the user runs it at his own peril and risk.

There are several most famous tweakers:

• EnhanceMySe7en Free;
• Windows 7 Little Tweaker 1.1;
• WinUtilities Free Edition;
• XdN Tweaker;
• WinBubbles Lite 2009;
• TweakNow Power Pack 2009;
• Windows 7 Manager;

We will not dwell on the description of the programs in detail, but will consider programs specialized for system optimization.

Programs for optimizing the operating system

Advanced SystemCare - free set of options

The program is a package of basic options for debugging, repairing, restoring, and simply monitoring the system for any malfunctions. Presented in two versions: paid and free. As a rule, the free version does not always work correctly, especially since it does not include all the system protection components provided by IObit. Update free version crashes on many computers, or is not produced at all. However, the program in terms of functionality and form of execution in the interface differs sharply from all others in better side. Therefore, if the user is seriously interested in increasing productivity, it is worth using Advanced SystemCare.

Interesting fact: To download the program from the official website, you need to disable the restrictions of some antivirus programs. As it turns out, the IObit site is on the list of suspicious or unwanted sites.

CCleaner is a good system cleaning tool

CCleaner is a simple and extremely effective program for cleaning and optimizing the system. One of the most best programs in terms of reliability and breadth of use profile. It has many advantages: speed of startup/work, high-quality search and removal of temporary and unnecessary system files, as well as correcting registry errors quite effectively. There is also a paid and free version. However, in the free version the loss in functionality is minimal.

Easy Cleaner will help speed up Windows

Free program for stable system operation. Its main tool is cleaning Windows registry. But, in addition to this, the program performs a wide range of optimization tasks. In practice, Easy Cleaner is a good tool that would be useful to every PC user. But the program does not always work correctly. Often there are failures when deleting files (after searching for them), and the program freezes during its operation. Meet on forums negative reviews and low program evaluations.

Red Button - optimization for amateur users

Initially, the program was conceived as an easy, uncomplicated solution for optimizing the system for amateur users. All you need to do is press the big red button. The result will come by itself. This is the simplicity of the program.

The latest versions of Red Button have recently been paid. There are also analogues of the program, the prices for which have now been raised as much as possible. According to reviews, the program is no different high reliability, and there is nothing unusual about her work. Red Button is the simplest common tool for optimizing and cleaning the system.

AusLogics BoostSpeed ​​provide control

The program, like many similar ones, monitors the state of the computer and its performance. The capabilities of the new version allow you to organize work with your hard drive and computer information better than other programs. It consists of several components, each of which is responsible for a specific function.

Main features of the program:

removing unnecessary files (Disk Cleaner);

• defragmentation (Disk Defrag and Registry Defrag);
• cleaning the registry (Registry Cleaner);
• fixing bad sectors on a hard drive (Disk Doctor);
• Internet optimization (Internet Optimizer);
• complete deletion of files (Track Eraser);
• recovery deleted files(File Recovery);
• search identical files (Duplicate File Finder);
• disabling system services (Services Manager);
• setting up startup (Startup Manager);
• setting up processes (Task Manager);
• information about files on the hard drive (Disk Explorer);

system information ( System Information) and other.

Problems occur when installing the product key. It is often deleted antivirus program, or the antivirus simply does not allow you to activate the program. It is not always possible to activate the program. It is difficult to find a key and generate it.

Glary Utilities - get rid of malfunctions

Another good program from Glarysoft to optimize your operating system. Has a set of more than 20 troubleshooting, productivity and cleaning tools.

Key features of Glary Utilities

• fixing errors in the system registry;
• removing unnecessary files;
• uninstalling programs;
• RAM optimization;
• managing Windows startup applications;
• deleting temporary files, traces of presence on the Internet;

SpeedUpMyPC - optimizes performance

SpeedUpMyPc - useful program to customize the Windows system and speed up your computer by optimizing key performance characteristics. According to the developers, this tool is able to increase the speed of even the most powerful machines.

Program features:

• Cleaning your hard drive and registry.
• system optimization.
• increasing the performance of your computer;
• simple and intuitive interface;
• the program is suitable for inexperienced users;
• the optimization process is as automated as possible;
• diagnostics and information about the causes of slow computer operation;
• reducing the loading speed of the computer and various programs;
  And much more.

Failures often occur when activating the program. FLYING license keys, or over time the program generates an activation error. But according to user reviews, the program really improves PC performance.

Comodo System Cleaner - manage settings to speed up your computer

Key Features and Functions Comodo System Cleaner:

• management of almost all settings of Windows 7 OS;
• Optimizing system performance, disk space and overall stability, thanks to the built-in Registry Cleaner tools and Disk Cleaner;
• Ensuring complete control over your computer;
• Managing online and offline private information - clearing history, cache, temporary files of Internet browsers, IM programs and Windows applications;
• Protect sensitive data and information with essential security utilities such as Permanent File Wiper, built-in hash checker, etc.;

The disadvantage of the program is that it loads the processor at 100%. Therefore, it is not advisable to run any programs and services in parallel.

nCleaner - remove all unnecessary files

A simple program for non-commercial use that allows the user to clean the system of unnecessary files in order to optimize it. It has more than 90 cleaning methods, helps to get rid of unnecessary entries in the system registry.

There were cases of the entire system crashing after cleaning: the program knocked out the OS and prevented it from working correctly. After each launch, it creates files with the extension .dll in system folders.

Table: comparative characteristics of cleaning programs

Video: optimizing Windows OS operation

Performance plays a very important role in the operation of a personal computer. Sometimes even the choice of device when buying it in a store depends only on the computer’s ability to process, send, and receive information at maximum speed. And to maintain productivity at the proper level, there are many ways and tools available to all users.

The Windows 7 operating system can work much faster and more efficiently, but for this you need to take certain measures. The main optimization measures should be considered.

Disabling visual effects

A very attractive design is envisaged. If you want to speed up the system, you need to understand that visual effects involve unnecessary resource consumption. You need to follow the specified path: Start -> Control Panel -> System -> Advanced system settings.

When the settings window opens in front of us, we carry out the following actions: Advanced -> Performance -> Options

In the design, the developers tried to simplify the optimization task as much as possible. You just need to select the “Provide best performance" and the settings will be set automatically. This greatly simplifies the task at hand. The result will be receiving classic look registration All this is presented in the screenshot below.

Not always new appearance may suit you and it requires some additional actions. You can choose any suitable option from available list, taking into account OS speed requirements. You should right-click on any free area of ​​the desktop and click “Personalize”.

Aero Glass mode can be accelerated by turning off transparency. This ensures that the translucency effect will disappear. Still in the same personalization section, you need to select the “Window Color” item, where you uncheck the “Enable transparency” checkbox.

For powerful devices this will not give any noticeable increase, but in the case of a weak video card it can provide a visible result.

Disable unused components

During the operation of the OS, one has to face a situation where a large number of services The difficulty is that not all of them provide for efficiency. It is for this reason that it is important to pay attention to this factor during optimization. Disabling certain components will not harm the OS.

We follow the suggested path: Start -> Control Panel -> Programs and Features -> Turn it on or off Windows components. A window will appear with the content shown in the screenshot.

We look through the list of issued components and uncheck those that we do not use. To obtain more detailed information, hover your mouse over the element of interest.

When certain components are turned off, the screen will display system message of the following type:

We confirm and continue optimization measures. It is necessary to list what exactly can be safely disabled:

• Default browser is IE if you use other programs to access the Internet
• Telnet server
• Built-in search engine, when it is not needed
• Telnet and TFTP clients
• Components of a tablet personal computer, since the setup takes place for a laptop or desktop device
• OS gadget system when there is no desire to use this feature
• Unix Program Subsystem
• Microsoft Message Queuing Server
• Operating System Activation Service
• Print service when the printer is not connected to the device

For all the changes made to take effect, you must restart the operating system.

Boot optimization for computers with multi-core processors

If you are using multi-core processor, you can take some measures aimed at speeding up the operation of the entire OS. In most cases, Windows itself can determine such a moment, but checking will never be superfluous. You need to enter msconfig through the Run window.

Now you should go to: Download -> Additional options

The window that appears indicates the number of processors, as well as the amount of memory. Changes must be made only when the parameters do not match the real ones.

If adjustments are specified, then a reboot occurs for them to take effect.

Restoring the Quick Launch bar

If you are used to older operating systems, you may experience the inconvenience of the Quick Launch bar disappearing. In order to return, the following list of actions is required:

1. Right-click on the “Toolbar” icon
2. Panels -> Create Toolbar
3. A field opens where you need to enter a new path
4. %appdata%\Microsoft\ Internet Explorer\Quick Launch

When you click "Select Folder", you will be able to see Quick Launch. To return to the usual place, you need to left-click the mouse and then move to the “Start” button. You should right-click on the “Quick Launch Toolbar”, where the “Show captions” and “Show title” checkboxes should be unchecked.

After all the procedures performed, the panel will have the same appearance as in the OS predecessor XP. This is clearly shown in the screenshot below.

Disabling UAC

A similar innovation came to Windows 7 from Vista. We will not talk about the need for such a solution, since this is one of the most criticized elements. It is important to say that it can be disabled without serious loss to the security of the OS. The main thing is to use a different antivirus. Needs to be considered various options actions in this situation.

It is possible to configure the frequency of notifications or completely disable this process. To complete the assigned tasks, you need to follow the path: Start -> Control Panel -> User Accounts -> Change User Account Control settings.

However, if necessary, you can adjust the frequency of notifications or turn them off completely. Do the following: Start - Control Panel - User Accounts - Changing User Account Control settings

As can be seen in the presented screenshot, several gradations of work are provided. You can set the slider to the most attractive option.

Power management system

The Windows 7 operating system allows you to control power within certain limits. Consumption electrical energy the device is set through a special settings section. You can select the most economical or productive option, and also choose a balanced mode. To access the corresponding window, you need to follow the path: Start -> Control Panel -> Power Options. If you don’t touch anything, then the balanced option is set. Below is the appearance of the settings window:

After setting it, you should proceed to use additional settings. To do this, click on “Change advanced power settings”.

A window will appear where you can select the appropriate settings. Once they are selected, it will only be necessary to confirm this.

Optimizing browser performance

This item must be enabled if you are using the default browser - Internet Explorer. To speed up the work, you should take some measures:

1. Start -> Programs -> Accessories -> Command Prompt

2. Right-click and select “Run as administrator”

3. In some cases, a message from User Account Control appears. Launch confirmation is required.

4. In the resulting command line window, enter regsvr32 actxprxy.dll

5. You must press enter. When the task is completed correctly, the following message should be displayed.

After this, you can launch the IE browser. As it works, it should become much faster than before.

Speed ​​up animation when windows pop up

It is possible to significantly speed up the process of pop-up windows on the operating system. The operating procedure described below is provided:

1. Launching the Registry Editor. You need to use the following path Start -> Run -> regedit
2. Searching for the special key HKEY_CURRENT_USER\Control Panel\Mouse
3. The key is opened and the MouseHoverTime parameter is detected there. For optimal performance with the system it is recommended to set the value to 150.
4. Now we are interested in another key. You need to find HKEY_CURRENT_USER\Control Panel\Desktop. It must contain the MenuShowDelay parameter. Its value should be set to 100.
5. For all changes to take effect, you must reboot the device.

Automatic login without requiring a password

A feature that will significantly speed up your work time is logging into the system automatically, without the need to use an access code. To do this, the following sequence of actions is required:

1. Follow the path Start -> Run
2. In the window, enter control userpasswords2 and confirm
3. The corresponding menu is displayed, where we are interested in the “Users” tab. In it you need to find your account and uncheck the box next to “Require username and password”.
4. In the window that appears, you must confirm your access by entering a password.
5. The system is rebooted to accept the changes.

Speeding up device shutdown

In some cases, when you turn off your computer, this process may take several minutes. When you find the shutdown time too long, there are certain actions you can take.

Go to Start -> Run, where in the window that appears, you enter regedit with further confirmation. We are interested in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control key - this is what we need to look for. When detected, the WaitToKillServiceTimeout parameter is changed. Its new value should be 500 or so. The default is 12000.

Removing arrows from labels

It all starts with the standard path Start -> Run -> regedit. In HKEY_CLASSES_ROOT\lnkfile you need to find the IsShortCut parameter and delete it. In order for the arrows to return to their place, the parameter must be restored. To accept the changes, the device reboots.

Windows 7 is a complex set of interactions between many programs, so the speed of the OS is influenced by a huge number of factors. You can't just disable a couple of programs or change one setting to get a significant increase in system performance.

Optimizing a system is not an easy task and requires care and integrated approach. This article covers the main possible actions in order to increase the performance of 64-bit Windows 7.

Using an SSD

If as system disk use a non-standard hard drive ( HDD), A solid state drive, then this event alone will quickly and significantly increase (64 bit). The main advantage of an SSD disk is its many times faster data storage and playback speed (500 MB/s) compared to hard drives.

Even loading the operating system from this media takes only a few seconds. Currently, all the equipment used in computers is high-speed, the only weak link in the interaction chain is the hard HDDs, which slow down the operation of the entire system.

Install a new BIOS and check the software is up to date

It is necessary to perform the following analysis: are the drivers updated, is the PC's BIOS up to date? When installing drivers, you should take into account the bit depth, i.e. For a 64-bit OS, you need to download the appropriate software for your computer hardware. If there are no drivers for specific device for Windows 7 (64), you can download the corresponding software for Vista.

Increase RAM

Often the problem of slow operation of a PC with Windows 7 is a simple lack of RAM. The best method to fix the problem is to increase the RAM. This event always significantly increases the speed of the PC and leads to optimization of the OS. In order to ensure comfortable Windows operation 7 (64-bit) requires at least 4 GB of RAM.

Optimize the interface

In “Seven” it is the main “devourer” of system resources. Although it only adds some beauty and individuality to the external design and is completely unnecessary for work. Significant performance degradation due to Aero occurs on a PC with an insufficiently powerful graphics card or if it is built into the motherboard.

Turning off all almost invisible to the eye will improve performance Aero functions. To do this you need to open "Control Panel", then go to the “System” tab and go to "Advanced system settings". Next in the bookmark "Additionally" find and click on “Options”.

Here you can disable functions such as: showing the contents of windows while moving, sliding effects, menu fading, animation, casting shadows on icons, cursors and windows, etc. Even disabling only some effects will already increase the speed of Windows 7, and in the case of an unpretentious user, it is recommended to click on “Ensure the best performance” in the settings.

Optimize the list of applications in startup

A significant number of applications are loaded simultaneously with Windows 7. The developers of these programs ensure that they are loaded in the background and the computer owner does not see them. But this is only necessary for utilities that are used constantly.

Need unnecessary applications. Must boot with operating system the following programs: hardware drivers, firewall and antivirus utility. To optimize the list of automatically loading applications, you need to hold down the “WIN” key and press .

Startup programs can be seen in the system tray on the taskbar. However, not everything is displayed there. A special application for Windows “AutoRuns” has been developed, which is distributed freely from the Microsoft Corporation resource. "AutoRuns" shows a complete list of downloadable applications. In the window this application You just need to uncheck the boxes next to the unnecessary program.

Disable unnecessary services

By disabling the start of some services, you can improve your computer's performance. To do this you need to log in "Control Panel", further in "Administration", where in the “Services” tab select unnecessary service and click “Disabled”.

Defragment your disks periodically

With increased fragmentation data hard The disk is forced to do extra work, and this affects the performance of the PC. It is recommended to run defragmentation manually to organize files for optimal functioning of the hard drive.

Turn off automatic defragmentation

The creators of Windows 7 provided background execution defragmentation, during which computer performance is significantly reduced. You must configure the process through the “Start” button. Select the line “Standard” in the “All Programs” tab, then enter “Utilities”, where you can find "Defragmentation". To increase the speed of Windows 7 prerequisite is to regularly perform defragmentation manually.

Get rid of old, unnecessary or outdated applications

Some PC manufacturers release their devices with already installed applications that the user does not need. They slow down Windows 7 by using memory and disk space.

It is advisable to rid the computer of all unused applications. This list should be supplemented with programs that the user himself installed, but which have lost their relevance over time. The simple act of removing these programs will improve system performance.

Remove unused gadgets

In Windows 7, gadgets increase the comfort of using a PC, but they all require system resources to start and function. By using only the gadgets that are necessary for regular use, system performance will increase.

Step-by-step instructions for improving performance and optimizing Windows 7

Optimizing the operation of Windows 7 is extremely relevant today and is available not only to professional engineers specialized centers, but also for ordinary users.

Since release by the company Microsoft operating systems Windows 8, the popularity of her predecessor, Windows7, doesn't get smaller.

Prevalence of Windows versions as of March 2014 (according to http://www.netmarketshare.com/)

Windows 8/8.1 - 12.54%

Windows 7 - 50.55%

Windows7 proved to be the most successful and user-friendly version of the OS on the Windows platform, especially in comparison with its predecessor - Windows Vista.

Currently, the objectives set by software manufacturers and user expectations regarding system speed and performance in to a large extent have increased.

The number of programs has also increased preinstalled by manufacturers on new laptops and personal computers, which often only take away system performance. In addition, over time, a huge number of temporary and unnecessary files generated by programs and Internet browsers accumulate.

In connection with the above, an increasing number of companies are engaged in both the development specialized utilities to optimize the performance of Windows 7, and by creating multitasking programs that clean and configure the system, optimizing its operation based on the needs of a specific user, along with a set of other software (for example, all-in-one antivirus software, CCleaner, RegOptimazer and others).

But let’s not forget that all cleaning and optimization programs act superficially, without affecting the depths of the system. Thanks to simple steps, any user can safely and effectively optimize Windows 7 performance without resorting to deep analysis and practical study her work.

To optimize Windows7 performance, follow these steps:

1. Completely disabling UAC (User Account Control)

First of all, it is worth drawing your attention to the fact that this tool is one of the most important regarding the security of the system and disabling it will inevitably reduce the overall level of its protection from external threats. However, many users have greater confidence in high-quality antivirus software.

In this article we offer you the ability to either completely disable UAC or change the protection level.

Before performing the suggested actions, you should log in with your account. Administrator.

1. Click the Start button
3. Go to User Accounts
4. Change User Account Control (UAC) settings
5. Select the required degree of protection by changing the position of the slider.
6. Click “OK”
7. Reboot the computer.

2. Setting the standby mode (“Sleep mode”)

In the default settings, using sleep mode is inconvenient: the computer wakes up at the slightest movement of the mouse.

To this to correct, you need to do the following:
1. Click the Start button
2. Open the Control Panel
3. Go to Device Manager
4. Open the “Mice and other pointing devices” tab
5. Find the “Power Management” tab

6. Uncheck the option “Allow the device to wake the computer from standby mode”
7. Click “OK”
In the future, for exit from standby mode, use the keyboard (by pressing any key).

3. Speed ​​up the Start menu

One of the most commonly used controls in operating systems Windows is definitely the menu "Start", functionality which grows with each new version OS.
If you use a “non-classic” design mode, it is possible to significantly speed up the operation of this indispensable control.
So let's get started:
1. Right-click on the Start menu icon or on the panel tasks
2. B context menu select “Properties”
3. Open the “Start” tab
4. Click “Configure”
5. In the “Customize the Start Menu” window that opens, find the “Highlight recently installed programs” option and uncheck it
7. Click “OK”

4. Aero Visual Effects

Problems with Aero interface most often occur if the computer has a video card integrated into the motherboard or a weak video card is installed - problems are very likely to occur when using the Aero interface. Also difficult to process graphic elements Windows 7 low-cost laptops and netbooks are often tested.
However, it is possible to reduce the Aero interface's consumption of PC resources by without turning it off completely. By disabling some elements, you will relieve the computing power of your computer and video card, without losing much of the beauty of the Aero interface.
To do this you need to do the following:
1. Click the Start button
2. Open the Control Panel
3. Login to the System
4. Open Advanced system parameters
5. Go to the “Advanced” tab
6. Click the “Options” button in the “Performance” section

7. Disable the following parameters:
7.1 Animated controls and elements inside a window
7.2 Menu fades after calling a command
7.3 Casting shadows on desktop icons
7.4 Displaying window contents when dragging
7.5 Displaying shadows cast by windows
7.6 Displaying samples and filters in this folder
7.7 Displaying a transparent selection rectangle
7.8 Displaying a shadow under the mouse pointer
8. Click “Apply”.

You can disable some other options, but the effect will be more noticeable.
Attention! If after saving the changes the “transparent” Aero interface disappears, right-click on the desktop and select “Personalization” » “Window Color and Appearance” » Check the box next to “Enable transparency” and click “OK”.

5. Changing the display of Service Pack

There are times when we are unable to completely install all elements of the game, or after installing it we see a notification about installed in Windows 7 Service Pack 2. In order to correct the situation, we need:

1. Press the Win+R keys simultaneously (or Start » Run)
2. In the “Run” window that opens, enter the command: “regedit” and click “OK”
3. A Registry Editor window will open.
4. Find the folder
"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows"
5. Change the “CSDVersion” value from “0” to “100” ( SP1). Click “OK” and exit the Registry Editor. If you set the parameter value “CSDVersion” = “300”, then the system will display that
Service Pack 3, and if the value “CSDVersion” is = “0”, then the system will display that the Service Pack is installed is not installed
6. Reboot the computer.

6. Disabling services

Shutdown rarely used services will free up some of the computer's RAM, and will also allow the system to access virtual memory less frequently, which will result in faster system performance.
Although unforeseen complications as a result of service outages are unlikely, we nevertheless suggest that you create restore point, which, if necessary, will allow us to roll back the system to the required time (control panel » system » system protection » create). To ensure maximum stability of the system and applications, we recommend that you use the “Manual” option when disabling services.
For disabling services perform the following actions:
1. Click the Start button
2. Open the Control Panel
3. Select Administration

4. Select Services
To disable a service, double-click on its name with the left mouse button. The service control panel will open. In the “Startup Type” drop-down menu, select “Manual” and click on the “Stop” button. Save the changes by clicking "OK"
Absolutely safe You can disable the following services:
Service entry Tablet PC
Support IP Service
Remote registry

Disabling other services may result in unstable work operating system and should only be executed while absolutely confident is that you know what result it will lead to. Be extremely careful and careful when handling this tool.

7. ReadyBoost function

In the operating system Windows implemented the ability to use USB flash memory devices as additional to the resource's RAM for data caching, which speeds up the execution time of data read-write operations and increases system performance. Expensive RAM modules or lack of free slots in motherboard Often they do not allow you to physically increase the amount of memory.
Using USB drives or Flash cards as additional RAM using ReadyBoost technology makes it possible to virtually expand memory and increase computer performance. The system writes to the media memory data from the most frequently used programs, which can significantly reduce their launch time.
To activate ReadyBoost functions You need to do the following:
1. Insert the USB drive into the port.
2. In the Autorun window that appears, select “Speed ​​up the system using Windows ReadyBoost”
3. Activate the “Use this device” option
4. By moving the slider, we set the limit of used space on the media
5. Save the changes by clicking on the OK button.
After performing these operations, the ReadyBoost.sfcache file will be automatically created on the flash card. Don't take it out flash drive from your computer!

8. Performance Tuning

When installing the operating system, the default power plan is “Balanced,” which reduces system performance and responsiveness.
In total, the Windows 7 operating system provides three main power plans:
Balanced (system performance when necessary and energy saving when inactive).
Energy saving (reduced system performance). This scheme helps mobile PC users make the most of a single battery charge. but for a desktop system it is not relevant.
WITH high performance(increases the performance and response speed of the system).

Your computer may also have other energy saving settings configured by the PC or laptop manufacturer. In this case, we do not recommend changing their settings, because the manufacturer has already selected the most optimal values all parameters.
To change the plan, do the following:
1. Click the Start button
2. Open the Control Panel
3. Go to Power Options
4. Choose a plan that meets the needs of our system and device.

9.Customizing the Taskbar and Superbar

Superbar Windows 7 has wide possibilities for personalization and customization for a specific user. To optimize the panel, follow these steps:
1. Place the mouse cursor on the taskbar and press the right mouse button. The taskbar context menu will open. Uncheck the “Lock the taskbar” checkbox.
2. Now move the cursor over the edge of the taskbar until it turns into double arrow. Click and hold the cursor with the left mouse button. Move the cursor up, the dotted line will show the location of the taskbar. Release the mouse button.
3. Now we fix the Panel again by checking the “Lock taskbar” item in the context menu. This is necessary for the normal display of tabs and panels. If this is not enough for you, the size of the taskbar can be increased to suit your needs up to half the screen. Ease of navigation can also be improved by opening the taskbar's Properties context menu and changing the way the taskbar buttons are grouped from "Do not group" to "Always group, hiding labels."

10. Memory diagnostics

If your operating system is prone to failures and is unstable, we recommend diagnosing your RAM. This also applies to users who overclock system components.
Settings for OS Windows 7:
1. Open the Start menu
2. In the Search column, enter “Memory”
3. In the search box, select "Windows Memory Checker"
4. In the window that appears, select one of the options:

- Reboot and check (recommended)
— Run the scan the next time you turn on the computer
5. After restarting the computer, wait for the RAM test to complete. This process can be quite lengthy.
After the diagnostics are completed, the computer will automatically restart.
You will see the results of the scan when you log into the operating system.

11. Defragment hard drives

Built-in Disk defragmenter organizes fragmented information for more efficient and fast work systems.
The disk defragmentation program runs according to a specified schedule, but you can also start fragmentation manually.
To run the built-in disk defragmenter, you must perform the following steps:
1. Click the Start button
2. Select Computer
3. Select drive C
4. By clicking the right mouse button, call up the context menu and select "Properties"
5. Open the “Service” tab

6. Select a section "Run defragmentation". You can also run a disk analysis, after which the system will make a recommendation whether there is a need to defragment the selected disk and indicate the percentage of fragmentation.
Depending on the size of your hard drive and how fragmented your files are, defragmentation may take anywhere from a few minutes to several hours. During defragmentation, work with the PC can not be interrupted, however, the system may slow down significantly.

12. Startup control

Many programs installed on a PC are automatically registered in the startup of your computer, even when there is no urgent need for it.
Being constantly in RAM, they significantly reduce system performance.
Ideally, the startup list should contain no more than two or three programs that you urgently need. As a rule, this is an antivirus and an email client.
The easiest way to clear the startup list is to use free program CCleaner, open the Tools section, then click on Startup and manually set the launch parameters for the programs you need.

Don't delete from the list system programs Windows. They can be distinguished by their location in the \system32 folder.

13. Cleaning and defragmenting the registry

System registry is a database for storing information about the computer configuration, operating system settings and program settings to which the system
accesses hundreds of times per second during system boot and operation. A cluttered and fragmented registry can seriously slow down your computer.
When installing and uninstalling various programs, various “garbage” may remain in the registry: program settings, links to shortcuts, incorrect file extensions, and much more.
Over time, a large number of such erroneous registry settings can significantly slow down the operating system, lead to crashes and various problems, interfering with normal functioning OS.

To optimize the registry Let's do the following:
1. Open the CCleaner program and go to the “Registry” menu
2. Click on the “Search for problems” button
3. After completing the search, click on “Fix”
4. The program will offer to save backups changes made, if you are not sure, save
5. In the window that appears, click “Correct marked” and confirm your choice.
Perform this operation once every two to three weeks.

Windows 7 Registry subject to fragmentation, which causes the system to gradually slow down. System defragmenters do not work with registry files, so for these purposes you will need to install a specialized program.
One of best solutions to defragment the registry is a utility Auslogics Registry Defrag.

14. Disabling the autorun function from removable media and CD drives.

Disabling autorun is not only speed up work With external media information, but also will protect protect you from a number of viruses entering your computer.
Launch Notepad (in the Start menu, in the Search line, enter the word “Notepad”).
After launching the Notepad program, copy there next text:


"HonorAutoRunSetting"=dword:00000001
"NoDriveTypeAutoRun"=dword:000000ff
3. Next, select the menu item “File” - “Save As”.
4. Select the file type “All files”
5. Specify the file name and extension for it “*.reg”
6. Close the Notepad program.

7. Run the newly created file and agree to make changes.
If the autorun function is still present, do the following:
1. Open Notepad
2. After launching Notepad, copy the following text there:
Code:
Windows Registry Editor Version 5.00

"AutoRun"=dword:0000001

"allocatecdromes"="0"

"NoDriveTypeAutoRun"=dword:00000091

"NoSaveSettings"=dword:00000000
3. Next, select the menu item “File” - “Save As”.
4. Select the file type "All files"
5. Specify the file name and extension for it “*.reg”
6. Then exit the Notepad program.
7. Run the newly created file and agree to make changes
8. Restart the Computer and check for autorun on the media.
Attention this method will disable autorun for you from all storage media:
Flash and portable drives;
CD, DVD, BD discs;
Network drives;
Local disks.

15. Move the recycle bin from the desktop to the taskbar

If you feel like it fully free your desktop from icons, then you can do this. After all, in Windows 7 not only is it possible remove the Recycle Bin from the desktop, but even pin it to the taskbar.
1. Right-click on empty space on the desktop.
2. In the context menu, select Create - Shortcut.

3. In the Object location field, insert:
%SystemRoot%\explorer.exe shell:RecycleBinFolder

4. Click Next.
5. In the window that opens, in the Shortcut name field, enter Trash and click Finish.
6. A shortcut has appeared on the Desktop (to make sure it is the Recycle Bin, double-click it), but it looks like an Explorer shortcut, not Baskets. To fix this, right-click on it and select Properties, then click the button Change icon.
7. In the Search for icons in the following file field, enter:
%SystemRoot%\system32\imageres.dll
and press Enter.

8. From the proposed collection of Windows 7 icons, select the Recycle Bin icon and click OK twice.
9. Now our Recycle Bin icon looks authentic. Drag it with the right or left mouse button somewhere on the taskbar.
10. Right-click on the desktop, select Personalization, then Change desktop icons and uncheck the Recycle Bin.

16. What to do if your hard drive partition disappears after installing Windows 7

Let's assume that your computer's hard drive contains two partitions (C and D) and after installing another OS on the second partition, the first partition is lost. In reality, the section remained where it was, but Windows 7 did not assign a letter to it. Therefore, we do not have access to the data stored on this disk.

To assign a drive letter, go to Control Panel -> Administrative Tools -> Computer Management.

In the left menu, select Storage Devices -> Disk Management. This displays information about all drives connected to the computer, including logical drives(sections), drives and removable drives. Our lost partition is located here - it is displayed in the list and has neither a letter nor a volume label, but is recognized by the system as a hard drive.

1. Right-click on it and in the menu that appears, select Change drive letter or drive path.
2. In the window that opens, click the Add button.
3. In the window that opens, in the Assign a drive letter line, all free letters are presented in the form of a drop-down list; we can assign any of them to our “unidentified” partition.
4. Select a letter and press the OK button.

As you can see, setting up and optimizing Windows 7 with the proper approach is not difficult and fast way both improve the process of using a computer and increase its performance and speed.

Important!

If, after optimizing Windows operation, you have not achieved desired result, or your actions led to disruption of the system, UService specialists will help you.