Download a Word document with a beautiful frame. Decorative frames for text. Ways to create a frame for coursework

Do you need the most large collection frames in RuNet? Then you have come to the right place!

There are frames for text design. They are also used for framing paintings, photos, and what is especially interesting for us, electronic documents Word. Agree, dry text written in black and white is not very pleasing to the eye. Of course, if we're talking about about business documentation, you need to adhere to the appropriate style. There's not much to experiment with here. But even here you can create a stylish page frame.

note . At the end of the article, sets of frames available for download are presented to you -.

It's another matter if we create a letter, a children's book, or any other document of an entertaining nature. Here we can safely use our imagination and create a beautiful and vibrant document design, thanks to the use of all kinds of frame variations available in Word.

. Don't forget that finished document must be designed to the highest possible quality. Don't forget to put numbers for each page (see).

If you need to frame a piece of text in any document that is published on your site, you can use HTML tools(cm. ).

Adding frames in different versions of the editor

This section Suitable for those who want to understand how to make a frame in Word. The process is quite similar in all editor variants, but there are still slight differences. Let's start with the oldest version.

Frames in Word 2003

Open the document into which you want to insert a border. Next you need to do the following actions:

Frames in word 2007

Frames in Word 2010

Here the process is similar to that discussed above. So let's try to expand the standard editor set a little. There is big set frames for Word: pictures, all kinds of lines and even frames in the form of GOST frames. We invite you to download three sets (see):

Some interesting pictures for frames
The archives contain a pretty good set of frames. Launch, see which ones suit you, and use them.
note. If you need to indicate below the frame in the document Additional Information, you can add it using footnotes (see)

A short instructional video:
Update. Added set patterned frames. Jun 5, 2015
Conclusion
Using frames will allow you to format the document, add the necessary technical fields, and make it more original and readable.
Can be used in any Word document. This way, you can set the desired orientation for the entire document or a separate sheet.
Allows you to create convenient navigation inside the document. Use them to add a table of contents.

Why look for information on other sites if everything is collected here?

Often the need to format text arises not only as a consequence of the personal initiative of the author of the document. When creating manuals, manuals and preparing creative works information material often framed by a frame.

The most popular text editor that every PC user is familiar with is MS Word. It is not only convenient and easy to use, but also allows you to create artistically designed works. How to use this editor to prepare a colorful postcard or booklet?

How to insert a frame in Word - Word 2003

This version of the editor is currently quite rare, but it is still present on some computers.

Create a new one Text Document(Word) or open an existing one.
On the toolbar, find the “Format” menu and click it.
In the list that opens, select the “Borders and Fill” item.
A window will appear in which you are interested in the “Page” tab.
Now all that remains is to choose appearance and the style of your frame.

Frame type: choose what your frame will be - flat, three-dimensional, with a shadow or artistic (the “Other” item). Set the type of outline - solid or dashed, its color and thickness.

Artistic frame. If you want a more colorful design, use the “Other” frame type. Next, go to the “Drawing” item and, from the options offered in the list, select the one that suits you.

In the right half of the window you will see a preview of the frame.
If you are satisfied with everything, click “Ok”.
The frame is ready.

How to insert a frame in Word – Word 2007, 2010

These versions of the editor are very similar to each other, so the algorithm for creating a frame will be identical.

Open a text document or create a new one.
Find the “Page Layout” tab on the toolbar and go to it.
Among the sections that appear, select the “Page Background” block.
Next, click on the “Page Borders” icon.
A window with several tabs will open. To create a frame you need a “Page”.
Click on it and select the style and color of the frame (in the same way as in the case of the Word 2003 version).
Evaluate the result in the field on the right.
Click “Ok”.

How to insert a frame in Word – Word 2013

Open the finished one Word document or create a new one.
Find the “Design” tab and click on it.
Many sections will appear in front of you, among which you select the “Page Background” block.
Click on the “Page Borders” item.
The “Borders and Fill” window will open, in which you specify all the parameters for the future frame in the “Pages” tab (in the same way as when working with the Word 2003 version).
Next, if you are satisfied with the result, click the “Ok” button.

How to insert a frame in Word - scope of parameters

The frame obtained as a result of working with the “Page” tab will appear only on the page that was active during work. If you need to create a similar border on each page of the document, the steps should be as follows:

Go to the “Borders and Shading” window (how to get there is described above for each version of Word).
IN right side section, select “Apply to”.
In the drop-down list below, select the pages on which the frame design will be present.

You can choose not only the style of the frame and its location within the document, but also the boundaries for placing the outline within the page. For this:

Go to the “Borders and Shading” window (how to get there is described above for each version of Word).
If desired, your frame may not have 1 or 2 sides, as well as a top and bottom border. To do this, click on the corresponding icons in the “Sample” section.
Next, on the right side of the block, select “Options”.
Click on it.
You will be taken to a table in which you must, if desired, change the size of the fields and indicate the location of the frame.
When the changes are completed, click the “Ok” button.

Working with a text editor will not cause any difficulties, and as a result you will get the necessary text framing.

Instructions

Open the document you want to frame in Word (Ctrl+O).
From the Format menu, choose Border & Shading. This will open the window shown in the screenshot.
IN Microsoft Word 2007, to access these, first select "Page Layout" and then find "Borders". IN in this case, in other respects this editor is no different from the previous ones.

In the window that opens, go to the “Page” tab. Here you can configure framework in accordance with your task and to your taste.
From the drop-down lists, sequentially select the type of future framework(solid, double, dotted line, wavy line, -dash, etc.), its color and width.
In addition, as framework You can select a pattern from the “Pattern” drop-down list. This pattern can also be "" in almost any color and set it as necessary.

On the left side of the window, if desired, give the frame a three-dimensional look or put a shadow on it. To do this, use the icons of the same name.
On the right side of the window you can add or border framework. For example, if necessary, you can right or left, top or bottom framework.
Once you are satisfied with the result, click “OK” to accept the changes and save the document.

If final result you are not satisfied, you can later edit or delete it. To do this, open the “Border and Shade” window again from the “Format” menu, and change the settings framework. To remove it, click the "No" icon in the upper right part of the window.

Helpful advice

Note: Sometimes you need to insert a frame inside a document to cover only part of the text, but not the entire page. In this case, select the part of the text that you want to wrap with a border, open the Border and Shading window from the Format menu, and go to the Border tab. The settings here are similar to those described above. Choose options for the frame, such as line type, width, and color. Then click "OK".

Sources:

How to make a border around a sheet in Word 2013

First part of the frame

Often, when preparing diplomas, coursework, laboratory and other similar documents, students need to insert Word standard frame according to GOST. You can use AutoCAD program, draw a frame in it, and then import it into a text document. But this is not the most convenient way, since not everyone knows how to use AutoCAD.

It is much easier to make such a frame in the MSWord program itself - using headers and footers. But first you need to format the worksheet correctly.

Before setting the page parameters, you must first set the units of measurement in centimeters. To do this, select the “File” item in the menu bar, then “Options” - “Advanced” - “Screen” - “Units of Measurement” and select “Centimeters” in the required field.

Then you need to open the “Page Layout” menu, go to the “Margins” - “Custom Fields” section and set all the required parameters.

After this, you can proceed to the frame itself. You need to select the “Page Layout” item in the menu, and the “Page Borders” button will appear on the right side of the menu bar. This will open the Borders and Shading window.

There is various options frame design (bold, dotted lines, etc.), you can specify the width of the frame, indent from, etc. Choose for thesis a strict black frame and click “OK”.

Second part of the frame

The rest of the frame can be inserted through the header and footer. Why is this so? Since we need a frame on each page, in order not to copy it manually each time, we can use the footer.

The header and footer in MSWord allows you to place text or any object in the top, bottom or side margins and duplicate it on each page. An example of a footer would be a page number in a document.

First, you need to draw the table you need with all the fields (full name of the teacher, first name of the student, due date, etc.). This can be done, for example, in Excel or in Word itself using the drawing tools (or through the “Table” menu - “Draw table”).

Then, to enable the visibility of headers and footers, you need to select “View” - “Header and Footers” in the menu bar. And insert the drawn table into the footer so that the table fields are in contact with the previously drawn frame.

That's all - the frame is ready. On each new page both frame and table in footer will be automatically duplicated.

Making out various works, we try to decorate our documents with different elements. The MS Word program provides the ability to create frames in the form of various drawings. Master this function easy, all you need to do is follow these steps.

Instructions

MS Word 2007-2070 In this version of the program, do frame even simpler. To begin, open the “Page Layout” tab, and then click on the “Page Borders” button. Further everything is the same as in previous version.

note

Remember that business documents must be drawn up within strict boundaries.

To add individuality to a document or highlight any part of it, separate headings, etc., adding frames is used. This can be done using special text editors.

You will need

- M.S. Office Word.

Instructions

Download and install Microsoft Office Word or equivalent software on your computer Open Office, if this has not been done previously. The principle of operation will be approximately the same, in that over time the Microsoft developer program will require activation and input license key.

In your installed text editor, open the document for which you want to add frame. If it has not yet been created, enter its main text in the program, save, make a copy, format as you wish, and only then proceed to add a frame. This is done in the formatting menu in older Microsoft versions Office Word and, if you have a program of 2007 and higher, then find this item through last tab programs.

Select the "Borders and Shading" menu item. Specify the type of frame at your discretion. In the field called “Apply to...”, select the size of the frame in relation to the document, its part or page. Specify the remaining parameters, and then apply them.

If you need to edit or delete frame from , in the same menu on the type settings tab, select the “No” option or change the parameters as you wish. In cases where you need to add an unusual frame, whose template is not used in standard set MS Office Word tools, use a set of macros that are downloaded from special sites on the Internet.

In cases where you cannot change frame document or page (any editable element), make sure that it was created using the appropriate menu item. If you have problems deleting or editing a document frame, use the display non-printing characters and structure feature text file. Before editing a document, try to always create a copy of it and work with it.

Helpful advice

Add a frame only after you have entered text.

Word - convenient universal program for typing and editing text, included in Microsoft package Office. It offers users virtually unlimited possibilities for manipulating words. To make a document more businesslike or to draw attention to certain points, use a text frame.

You will need

- installed package programs from Office.

Instructions

Open Word on your computer. Dial required text. If the file with the text for the frame has already been typed, then simply open it.

You will find everything you need to create a frame for text in the program itself. Pay attention to the version installed on your computer Word programs. You can find it out by clicking on the program icon on your desktop right click mice. Select “Properties” from the menu that pops up. The program version is the number that is indicated after Office words.

For text in Word below version 10 (before 2007), use the Format tab. From the menu that opens, select Borders and Shading. A new window will open in which you can set the type of frame required for your document.

Select the Page tab if you plan to use a border for the entire sheet. Set the line type, color, and width you need. You can use an original drawing as a frame by selecting it from your library. To do this, use the “Drawing” window. If you need this frame throughout the entire document, use the “Apply to...” switch in the lower right corner.

When you want to use a border only to emphasize a specific point in the text, use the Border tab. Specify the desired type of frame and lines, their color and width. The necessary switch “Apply to... paragraph” is already selected here. Selecting all required parameters, click OK. A frame will appear on the page and you can add text there.

If you have Word version 10 and higher, the “Borders and Fill” tab is located on the panel in the “Home” menu, in the “Paragraph” window. The icon may already be installed or hidden in the pop-up menu. Find in the panel a picture with borders (“Top border”, “ Bottom line", etc.), click on the down arrow. In the menu that pops up you will see the function you are looking for.

Video on the topic

By means text editor MS Word can make a document beautiful, for example, by adding borders to the pages. The type of frames is determined by the user according to his taste.

How to create a frame on a page

Create a document using the New command from the File menu. If you're using Word 2003, go to the Format menu and click Borders and Shading. Go to the "Page" tab. On the left side of the window you can choose the type of frame: regular, with shadow or volumetric. Click on the frame you like.

In the section on the right in the “Type” window, you can choose from a variety of frame types: dotted, single, double, zigzag, etc. If you need color frame, click the down arrow to the right of the Color window and click the appropriate shade in the palette. To expand your selection, click More Line Colors. In the Width window, select the width of the frame lines.

You can create a combination frame with different types lines marking the vertical and horizontal sides of the document. Find a suitable line, select a color for it, and in the “Sample” section, click the button for the desired border. Then choose new line and click the other border button. Create a frame this way. Click the Options button and edit the frame appearance if required.

In the "Apply to" list, specify where the frame will be placed: on all pages of the document, on current page or in the entire document except the current page.

If you have more than later version Word, in the main menu, go to the “Layout” tab and select “Page Borders”. Then proceed in the same way.

How to remove a frame from a page

Right-click the frame and select Format Frame from the context menu, then click Delete.

There is another way. On the toolbar, find the “Remove Borders” button. Click the down arrow and in the drop-down section, click the buttons with the images of the borders that you want to remove.

Word editor provides ample opportunities for formatting texts. In particular, it can be highlighted by decorating it with a frame. Circle the document simple lines You can press a button to insert a beautiful frame, it will take a little longer.

Make a frame in Word

To begin, open Word and write some text. Now find “design” in the menu; for older versions of the editor, “format” - in the right corner, open the “page borders” or “borders and fills” window. Start creating a frame - select the color, width and type of line, the type of the frame itself: simple, volumetric, shadow. Word offers framing options:

One-sided;

Double sided;

Tripartite.

Set the settings and click “ok” - the frame is ready. If you want to do this, find the “drawings” item in the “page borders” menu, select the one that suits you from the suggested options and decorate the text. To mark a separate piece of text with borders, select it, select “border” - “paragraph” in the settings and click “ok”.

You can also go the “other way” - find a frame in the templates offered by the editor, insert it into the document and write text in it. To do this, open the “create” option, in search bar type: borders, frame, notepaper and select the desired one from the received options.

How to make a beautiful frame

If you want to format your text beautifully, download it from the Internet ready frames, save them to your computer, then paste them into your document. This is not difficult to do. Open the editor with the finished text, click the “insert” icon, select the “drawing” option and upload it from your computer. Now work with it - click the “work with picture” icon, select the flow “behind the text”, shrink or stretch the frame, setting required sizes in width and height. You can move it left and right, up and down, and that’s where editing ends.

Video on the topic

Previously, in order not to bother ourselves with drawing small and large frames for term papers or diplomas, we ran to the store and bought them. Now, it’s much easier to download a template for the frame you need and print as many as you need on your printer. The same situation applies to the design of text in abstracts, certificates, diplomas, and similar frameworks. Having downloaded and printed a beautiful frame, all you have to do is type it right away or enter your content after printing.

here are frames according to GOST: 15 and 40 mm;
you can also download an empty frame, with margins of 5 and 20 mm;
There is a small selection of decorative frames that are made in DOC format, for Word;
for all this you will only need one, under which you can evenly fill sheets with A4 format frames.

15 mm frame (small)

A small A4 frame, which has standard borders on the right, bottom and top of 5 mm, and on the left 20 mm. You can download it in the format for Word of any older versions. This is in case you need to fill or edit this frame. If everything fits and you just need to print it, it’s better to use a format that can be printed even without having established office on the computer.

40mm frame (large)

This frame is usually used for drawings or at the beginning of sections. Its height is 40 mm, the margins are standard: 5, 5, 5 and 20 mm. This frame is also available for download in two formats: and , both in A4 format, respectively.

A4 frame with numbered sheets

Such A4 sheets with a frame with only space for the sheet number are needed for essays and term papers. By placing a zebra, you can write your text manually with the same indentations. You can download a frame with numbering for free in or format.

Blank A4 frame

This is the most basic type of frame - without a table or numbering. In other words, around the perimeter standard sheet(297 x 210 mm), a rectangle is drawn that respects standard fields according to GOST. Depending on the need, download the frame file or print immediately.

Decorative frames for text

Next are frames that will help you beautifully design your text. Any of them is available for download in DOC format for the Word program. Thus, having opened the file in the office, you can print your own text, and only then print the finished frame.

Frame with yellow flowers

A course project is a study that is carried out in accordance with the assigned assignment on a specialized subject by students of secondary specialized and higher education. educational institutions. Such research is usually done when students have completed studying a subject and the teacher needs to find out how the material has been learned. In addition, such work helps prepare for writing a thesis.

The grade for the coursework can affect both the results of the session and GPA according to the diploma. This is why it is so important to protect it well. But only a correctly completed coursework can be defended as “good” and “excellent”. There are situations when the inspector returned student work only because of incorrect design or reduced the rating for it. It is in order to avoid such situations that you need to pay attention to the standards that should guide any student.

Requirements for the course project

One of the most important requirements to the course book is its design in accordance with GOST. By accepted standard not only the introductory part, the main section and the concluding part must be completed, but also the content, page title page, list of sources and applications. This is exactly what the coursework frame is designed for. But you need a frame for course project not for everyone, but only for students in engineering or computer fields.

Some students, thinking that making a page with a frame themselves takes up a lot of personal time, which could be spent on scientific research, prefer to purchase ready-made frames in a store, spending their earnings. In the end, it doesn't matter what frame you have. coursework- made by yourself, or ordered from someone, it is only important that it meets the accepted standard. That is why it is much more profitable to download a frame, or rather, its template, which can be customized accordingly and used throughout the entire period of study at a higher or secondary specialized educational institution.

Frames in Word according to GOST

“How to make a frame for a term paper in A4 format yourself in Word according to GOST?” - this question worries many students.

First you need to download the template. To do this, in the search bar of your browser you need to insert: “frameworks for coursework works word download for free". Next you need to start the download process. It is very important to choose trusted sites and resources and download only from them - otherwise, your computer may be infected with a virus, which is very unpleasant in itself, and in the process of completing coursework - very dangerous, because it can interfere with your work.
Open the downloaded file in word. Very often, when performing this operation, the system will notify you about the macros located in this file. This shouldn't scare you, because this warning has nothing to do with a virus alert software. In addition, it is macros that provide comfortable work with a template, so you don't need to disable them.
After the above operations, it should appear work panel– it can be customized.
After this, you need to create a new page
Then point the cursor at it and point to work area the frame you want to create. After this you can change this sheet. With this template you can create many of the most different frames for registration.

The document from the file is a template, so you do not need to change it directly - it is better to save it in a special folder.

In addition, in order to work correctly with this template, you must download special files with fonts. In addition, by using different header formatting styles, you can also improve your productivity.