How to download open office to your computer. How to install open office with Russian grammar checking function
Writer;OpenOffice is in many ways similar to other, long-known and familiar office software suites. However, it also has important differences:
- There are versions OpenOffice and for the operating system Linux, and under Windows (other operating systems are also supported - FreeBSD, Mac OS X). This allows you to fully work with the same documents on computers with different operating systems.
- OpenOffice legally freely distributed with source code. Thus, there is no problem of unlicensed software.
- File formats OpenOffice open, documented and widely known. Besides, OpenOffice can successfully work with files of many formats, including files created by other well-known office packages.
In that brief introduction We, of course, cannot describe all the rich possibilities OpenOffice. We will provide guidance only on installing the system, as well as basic actions in the word processor and HTML file editor. Information about the rest of the work OpenOffice available in the help system (though in English).
In many ways, work in OpenOffice is similar to working in any other office suite. Wherein OpenOffice able to work with data files of many common formats. Therefore, we hope that the start of application OpenOffice will not cause you any particular difficulties.
Launch OpenOffice
Launching components OpenOffice produced from the menu OpenOffice V KDE or Gnome:
- Word processor Writer launched by item "Text Document";
- The HTML editor is launched by point « HTML document» ;
- Spreadsheet system Calc launched by item "Spreadsheet Document";
- Presentation preparation system Impress launched by item "Presentation";
- Picture editor Draw launched by item "Drawing";
- Formula editor Math launched by item "Formula".
Immediately after the first start, you should perform some additional settings For correct operation with Russian language.
Installation and initial setup OpenOffice
Initial package installation OpenOffice produced during installation ASPLinux. Launch any of the components OpenOffice you can directly from the toolbar by clicking on the corresponding icon. We recommend starting with Writer(you can also select a submenu item "OpenOffice"KDE or Gnome"Text Document"). When launched, a window will appear prompting you to import address book. Click the button "Cancel".
For correct operation OpenOffice with Russian language, including verification and HTML editing-files, you need to make some additional settings. To do this, select the item in the main menu "Service", then "Options". The settings window will open OpenOffice.
In this window you can change many settings related to operation various components OpenOffice. However, we will only describe the settings that need to be made to proper operation systems with Russian language.
On the left side of the window, select "Language settings". The tree of sub-items will open. Select "Linguistics".
The item should be selected in the upper right part of the window , and there should be a check mark next to it. If this is not the case, turn on the checkbox with a mouse click. Click on the button "Edit..." in the upper right part of the window. A window will appear "Editing modules" \.
The language field must be selected "Russian"; if not, click to select. Then turn on the checkbox in front of the item "OpenOffice MySpell SpellChecker".
In addition to Russian, you can enable spell checking for Ukrainian, German and French in the same way. For in English it is enabled initially. After turning on spell checking for the languages you need, click the button "Close". Window "Editing modules" will close. You will be returned to setting options OpenOffice. Select an item on the left side of the window. The tree of sub-items will open. Select "HTML Compatible".
In field "Set of signs" you should select the encoding in which you want to save HTML files.
Standard encoding for the Internet - "Cyrillic (KOI8-R)". Select an item "Text Document" on the left side of the window. The tree of sub-items will open. Select "Basic fonts".
Here you need to select the fonts used for various types text. You must specify fonts installed on the system that correctly support the Russian language - for example, Helvetica. When you have finished setting the parameters, press the button "OK" at the bottom of the window. Now you can work with the office software package OpenOffice.
Text editor/processor Writer
Basic text editing functions
Work with basic functions Writer- entering text, moving through the text, selecting a block, cutting it, copying or pasting it - is almost similar to working in any of the known word processors with graphical interface(for example, for Windows or Macintosh).
Viewing Modes
IN OpenOffice Writer There are two modes for viewing and editing text on the screen - "page layout" And "online markup". When you use page layout, the screen displays the page as it would appear when printed. If installed "online markup", the text is shown without pagination and with a width that fills the entire window Writer- i.e. the way text is typically displayed in web browsers. Mode "online markup" convenient for preparing documents distributed in in electronic format, as well as when writing large texts. Switching between modes "page layout" And "online markup" done in the main menu - item "View", then "Online marking". In addition, on the panel located to the left of the text, there is an icon that allows you to switch the viewing mode.
Scale
Writer allows you to set the text viewing scale (zoom) as a percentage. To change the scale, select the item in the main menu "View", then "Scale". In the window that appears, you can choose from several fixed scale options or by selecting "Smooth", specify an arbitrary scale value.
Then you should press the button "OK". The new scale will be set. The scale selection window can also be called up by double-clicking with the left mouse button on the scale value, which is shown in the status bar at the bottom of the window Writer.
Spellchecking
Writer allows you to check spelling both while typing (underlining misspelled words) and when calling the check function. To turn on or off underlining misspelled words, select the item in the main menu "Service", then "Spelling", "Auto check".
When a word is underlined, you can choose from the correct options offered by the system or add given word V . To do this, right-click on the word. A menu will appear containing correct options, and there is also an item "Add". To check spelling in all text, select the item in the main menu "Service", then "Spelling", "Examination", or press the key. The verification process will begin.
When a word is found that is not in the dictionary, a window appears "Spelling" .
In this window, you can indicate whether this word should be corrected (you can select one of the options offered by the system or enter your own), replace it with the selected option throughout the text, skip it (leaving it unchanged) or skip it throughout the entire text. Button "Add" allows you to add a given word to the dictionary.
Word completion
Interesting feature OpenOffice Writer- auto-completion of words. If you have typed the first few letters of a word that you have previously typed, Writer automatically substitutes this word. If the suggested option doesn't suit you, just keep typing. And if it fits, press - the word will be typed in full, and you can continue typing from the next word. Sometimes this opportunity can significantly save time, and with normal typing the behavior Writer does not change. If auto-completion annoys you, you can disable it. If the system often suggests a specific word that does not suit you, you can delete this particular word. To perform these operations, select the item in the main menu "Service", then "AutoCorrect/AutoFormat..." and click on the item "Word Completion" at the top of the window
To disable auto-completion, click the mouse to remove the “tick” in the item "Complement words". To prevent the system from suggesting a particular word, you should find it in the list on the right side of the window (it is sorted alphabetically), select it with a mouse click and delete it by clicking the button "Delete entry".
Search and replace
Like any modern text editor, OpenOffice Writer allows you to search through text and replace the found sequence of characters with another. To search or replace, select the item in the main menu "Edit", then "Find and Replace...", or press the keys. A Find and Replace window will appear.
In it you can enter a string of characters that you need to find, and, if necessary, another one with which it should be replaced. Button "Find" allows you to find this line. Button "Replace" replaces the found line with a new one and finds where this line appears in the text next time (new button click "Replace" will replace and search next line and so on.). To replace one line with another throughout the text, use the button "Replace All".
Basic text formatting
As with most well-known word processors, formatting text in Writer is carried out separately by characters and by paragraphs. Character format includes font, size, underlining/italics, etc.; to paragraph format - indents (horizontal and vertical), alignment, etc.
Formatting characters
To change the format of characters (letters), select these characters. If you specify a character format change without highlighting characters, it will apply to the characters you enter immediately afterwards (without moving the cursor).
The simplest formatting change - turning on/off bold text, italics and underlining - is done by clicking on the corresponding buttons on the toolbar ([F], [K], [H]). To change the font, you can select it from the list present on the toolbar.
For more complex formatting of characters, select the item in the main menu "Format", then "Signs". A window will appear "Sign" .
In this window, by switching the items at the top of the window, you can configure everything possible options formatting related to characters. It is important that the text language is also set in this window. IN OpenOffice Writer language is a property of the sign. Each word is spell checked according to the language specified for it.
Paragraph formatting
parform To change the format of a paragraph, just place the cursor in this paragraph. To change the formatting of several paragraphs at once, select them. Changing the alignment is done by clicking on the corresponding buttons on the toolbar.
For more complex paragraph formatting, select the item in the main menu "Format", then "Paragraph". A window will appear "Paragraph" .
In this window, by switching the items at the top of the window, you can configure all possible formatting options related to the paragraph. In particular, you can specify the design of paragraphs in the form of a numbered or unnumbered list (item "Numbering").
Formatting text using styles
Like many common office word processors, OpenOffice Writer allows you to format text using styles. The main type of styles is paragraph styles.
The paragraph style determines the formatting of both the paragraph itself (indents, etc.) and the formatting of characters in the paragraph (font, size, etc.).
If a paragraph is formatted with a style, changing the style automatically changes the paragraph formatting. This is the first benefit of using styles. For example, if you wanted to change the font and size of all the headings in a text, without using styles you would have to make changes to each heading individually. But if all the headings are formatted using styles "Heading 1", "Heading 2" etc., it is enough to change only these styles.
In addition, paragraph styles allow you to create logical text layout, i.e. indicate the boundaries of sections, chapters, etc., as well as special types paragraphs (for example, quotes or examples). The beginning of sections and chapters is determined using styled headings "Heading 1", "Heading 2" etc. Writer can automatically generate a table of contents of text, specifying paragraphs with these styles as section titles. It is also possible to automatically number sections.
In addition to paragraph styles, character styles are supported. The character style controls character formatting without affecting paragraph formatting. Character styles are convenient to use, for example, to highlight quotes in text.
A window is used to work with styles "Stylist" .
To call this window, select the item in the main menu "Format", then "Stylist", or press the key. Initially in the window "Stylist" a list of paragraph styles is shown.
Applying styles
To specify a paragraph formatting style, place the cursor on that paragraph, and then select the desired style by clicking in the window "Stylist" . (If the cursor is placed on an empty paragraph, the style will still be assigned, and subsequent text will be formatted using that style.)
To specify a style for several paragraphs at once, you need to select these paragraphs, and then select the desired style by clicking in the window "Stylist" .
To apply character styles, you must switch the window "Stylist" to character style list mode. To do this, left-click on the icon with the letter [A] in this window. After that, to format a section of text using a character style, you should select that section, and then click in the window "Stylist" specify the desired style. If you specify a character style without highlighting, it will apply to the characters you enter immediately afterwards (without moving the cursor). To switch window "Stylist" back to the paragraph style list mode, you should select in this window the icon with a letter similar to [P].
Editing styles
To change any of the styles (paragraph or characters), select this style in the window "Stylist" "Change". The style editing window will appear.
The options at the top of the window allow you to change various character formatting properties and (for a paragraph style) paragraph formatting properties. Paragraph "Organization" used to set style properties. Field "Name" defines the name of the style. Field "Associated with" specifies the base style for of this style; If the base style is changed, similar changes are automatically made to this style.
There is also a field for paragraph styles "Next Style". In it you can specify which style the next paragraph is automatically formatted (when entering text) if the previous paragraph is formatted with this style. So, the header style is usually set to the following style "Main text"; This allows you to enter text immediately after entering the title, without wasting time on choosing a style. To create a new style, you should right-click in the window "Stylist" and select the item in the menu that appears "Create". A style editing window will appear in which you can specify all necessary properties style. If the window "Stylist" is in paragraph style list mode, a paragraph style is created; if it is in character style list mode, then a character style is created.
In addition, the system allows you to format the paragraph by ordinary means, and then automatically create a style with exactly that formatting. To do this, after formatting the paragraph, click in the window "Stylist" second right icon in the right top corner. The system will prompt you to enter the name of the new style, after which it will be created and appear in the list. You can also delete a previously created style. To do this, select a style in the window "Stylist" click the mouse, and then press the right mouse button and select the item in the menu that appears "Delete". However, the system does not allow you to delete styles that are present in Writer initially.
Page formatting
Writer allows you to customize the page size, as well as the header, footer (that is, the lines at the top and bottom of the page) and other page formatting properties. Moreover, for different pages can be installed different formatting using page styles.
Setting the Page Format
To set the page format, enable a header or footer, etc., call the item in the main menu "Format", then "Page". The page style editing window will appear.
In this window you can set, in particular:
- Page Size (item "Page" at the top of the window);
- Page numbering style - Arabic numerals, Roman numerals, etc. Paragraph "Page", field "Markup Settings" - "Format";
- Enable and indent header and footer - items « Page header» And « footer» . In particular, in any of these items you can disable the “tick” ; this will create different headers and footers for even and odd pages.;
- Enable and view the frame around the page - item "Framing";
- Formatting text on a page in several columns - item "Columns".
Having set the required page format, click the button "OK".
Pagination
To enable page numbering, you must first enable the required header or footer. By turning on the header and footer, you can edit it (in text viewing mode "Page layout") as normal text.
With the cursor in the footer, select the item in the main menu "Insert", then "Field", then "Page number". The page number appears. On each page it will automatically appear and be set to the desired value.
To move the page number (along with the rest of the header text) to the left corner, center or right corner, place the cursor in the header and switch the paragraph alignment (left, center or right) using the corresponding button on the toolbar Writer.
If the number should be located differently on an even and odd page, you should disable the “tick” for the header in which the page number is located in the page style editing window. “Same content left/right”. After this, place the number in the right way in the footer on one even and one odd page.
Page styles
In many cases, you want to ensure that different pages are formatted differently—for example, disabling the page number for the title page.
OpenOffice Writer allows you to set completely independent formatting for different pages - up to various sizes leaf. Page styles are used for this. (Using page styles is quite complex and beyond the scope of this quickstart.)
Working with chapters of text
If chapter headings are marked with row styles "Title", and the level of headings is reflected in the use of styles (i.e., for example, for sections top level used "Heading 1", for subsections - "Heading 2" etc.), OpenOffice Writer allows you to automatically number chapters and create a table of contents.
Chapter numbering
To produce automatic numbering chapters, select the item in the main menu "Service", then "Chapter Numbering". A window will appear "chapter numbering" .
Here you can configure the chapter numbering. The right side of the window shows an example of numbering in the form that is configured in this moment. You can find the desired numbering option by trying various settings and watching the example change.
Generating table of contents
For automatic creation table of contents, place the cursor at the point in the text where the table of contents should be. Select the item in the main menu "Insert", then "Pointers", then "Indicators...". A window will appear "Insert Pointer"
In this window, you can insert various pointers, but the initially proposed option is the table of contents. In field "Rate to Level" You can specify which level headings should be included in the table of contents.
For example, with a value of 3, the table of contents will include all paragraphs with the style "Heading 1", "Heading 2" And "Heading 3". After pressing the button "OK" the system will generate a table of contents and place it where the cursor was located.
Inserting pictures
OpenOffice Writer allows you to insert pictures (taken from files) into the text and specify their location, as well as whether they will be “flowed” by the text. To insert a picture into the text, select the item in the main menu "Insert", then "Drawing", then "From a file..." A window for inserting a picture from a file will appear.
Here you can choose required file.
When selecting a file with a mouse click (if the checkbox is enabled "View") turns it on preview on the right side of the window. To insert the selected picture into the text, click the button "Open".
By right-clicking on the picture, you can call up the picture settings menu. Using this menu you can set, in particular:
- How will the picture be positioned in the text (item "Binding") - at a fixed position in relation to the page, to a certain paragraph, to a certain character, or as a sign. If the picture is positioned "as a character", it is inserted into the line in the same way as a regular character (but its size does not change when the font size is changed).;
- Will the text “flow around” the drawing and, if so, in what way (paragraph "Wrap around").
Saving and reading files
OpenOffice Writer saves and reads files in .sxw format. This format is fully published and based on open standards. In addition, it allows you to save and read files in .rtf (Rich Text Format), .doc ( Microsoft Word 95 or 97/2000/XP) and others.
Saving a file
To save the current text on disk as a file, select the item in the main menu "File", then "Save", or press the keys. If the file has already been saved, it will be saved again under the same name. If it has not yet been saved, a window will appear to select the name and format of the saved file.
In this window, you can select the desired directory to save the file, specify the file name, and select its format (type). After specifying the file name and type, click the button "Save". After this, the file will be written to disk.
Saving a file under a new name
If you are working with a file that has already been saved and want to save it under a different name (or in a different format - for example, .rtf or .doc), select the item in the main menu "File", then "Save as…" A file name selection window will appear (see Figure 23), and you can specify the new file name and format.
Reading a file
In this window, you can find the desired directory and select the file in it that you want to open. After clicking on the desired file, click "Open". Writer reads the file and, if the reading is successful, you will be able to view and edit the contents of this file.
Editing HTML
Editing HTML files(format for WWW pages) in OpenOffice very similar to text editing in OpenOffice Writer. (In reality, HTML editing is done precisely Writer, working in special regime). This allows you to create WWW pages without special training, and also easily convert text documents on WWW pages. You can use almost all the techniques described above for editing HTML documents. Writer.
Basic HTML editing
HTML documents can be formatted in the same way as regular documents. However, the resulting WWW pages will be quite inconvenient to view. To correctly format HTML documents, you should use special paragraph styles that are automatically suggested in the window "Stylist" when editing such a document.
For body text, use a style "Main text", for headings - group styles "Title", for quotes - "Quote" etc. You can specify the alignment of paragraphs, as well as highlight sections of text in bold, italics or underlining. But changing the font is very undesirable - this can lead to difficulties for some users when viewing your page.
Link Creation
As you know, important HTML element- the ability to create hyperlinks to other documents.
In this window you should indicate the document to which the link is made, as well as the text of the link. The link text is indicated in the field "Text". The method of specifying the document to which the link is made is switched on the left side of the window.
When selecting an item « » you can enter a link to a document on the Internet in full format(URL). Paragraph "Letters and Messages" allows you to describe a link to an address Email(mailto) or news group usenet(news). By selecting the item "Document", you can insert a link to an existing document on disk. It should be taken into account that although in the field "Path" the full path to the document is indicated; in fact, if the documents are in the same directory, a link is created only to the document name - therefore, if both files are transferred to the Internet, the link continues to work.
Finally, the point « new document» allows you to create a link to a document that has not yet been created on disk. The system provides the opportunity to immediately create this document (to do this, select the item "Edit Now" at the top of the window) or create a link without creating a document (item "Edit later"). It is important to select the correct file type from the list (for example, "HTML Document"), and not just indicate full name file. When the link information is entered, click the button "Apply". The link will be created.
To edit a link, place the cursor on it and select the item in the main menu "Insert", then "Hyperlink". The same window will appear (see \Fig.25), but filled in, with the data of the specified link. In this window you can make the necessary changes and click the button "Apply".
Saving and Reading HTML Files
Saving and reading when editing HTML files is done in exactly the same way as in Writer. It is important that the files include HTML drawings are not saved. Therefore, when you transfer a file to another computer or to the Internet, they may be lost. Even if both the file and the pictures for it are transferred to another computer, but they are located in different directories, the pictures may disappear from the document. To prevent this from happening, it is best to keep all the pictures you insert into the document in the same directory as the document itself, and transfer them to another computer or to the Internet along with the document. It should be taken into account that OpenOffice can read almost any file in HTML format, but Russian letters will not always be displayed correctly. This is not a bug in OpenOffice, and the disadvantage of such files is that the encoding of Russian letters is not indicated or is indicated incorrectly. Instead of koi8-r, the encoding of Russian letters should be specified in this file; the most common encodings are koi8-r, windows-1251 and utf8.
Editing HTML Source Text
OpenOffice allows you to switch from editing the content of an HTML document in visual mode (i.e., in the form in which it will be visible in a web browser) to working with the source text on HTML language. This can be useful in a number of cases where you need to check and correct the HTML text itself. To enable or disable source editing mode HTML text, select the item in the main menu "View", then « Original text HTML".
Creating WWW pages using Autopilot
OpenOffice contains "Autopilot of WWW pages", allowing for short term and create a standard and quite beautiful WWW page without additional effort. To take advantage "Autopilot", select the item in the main menu "File", then "Autopilot", then "Web page..." A window will appear "Web page autopilot" .
By selecting field values, you can immediately see on the screen what the created page will look like. Having selected the desired type, press the button "Ready". You will be able to edit an HTML document that immediately has the necessary appearance. Now you just need to fill it with information.
Leave your comment!
Before working with documents, you should understand how to install open office. The package installation file can be downloaded from the official website OpenOffise.org
This package is cross-platform, meaning it can be installed on various operating systems. In this article we will look at the installation option on Windows 8.
To download the installation file and the Russian language checking application, go to the website
Select the Download OpenOffice section. To see the picture better, click on it and view it in full size. Opens in a new window.
On next page you need to click on the OpenOffice.org button with the green arrow
Next, download the file to your computer, the link to which is located in the green area of the page called Windows (Exe) Russian.
After clicking on the file name, the download does not start immediately, but after five seconds. If the download does not start, click on one of the provided alternative sources(1 or 2) from the download page.
After the file is downloaded to your computer, run it double click left mouse button and following the wizard's instructions, install OpenOffice.
To install the Russian language checking package, go to the page
Scroll down a little and download the LanguageTool program from the first button.
The download will start immediately from this site. Wait for it to finish. Transfer the downloaded file to the folder with Open Office installed. This will be located in the ProgramFiles of the disk with operating system Windows.
Now you need to open an open office, select from the menu Tools - Manage Extensions - Add. Next, select the newly placed file with the Russian language check extension. Click OK.
The changes will take effect after restarting OpenOffice. If the program is started with quick start, that is, constantly working in background, then you need to find its icon on the right side of the taskbar, that is, in the system tray. Right click Click on it and disable the application or exit it.
After that, open the open office again. Now you have figured out how to install open office with a Russian language verification package and can do it yourself. For thoughts on whether it is needed at all, read
Stay with us. We invite you to visit our website and receive new useful information about how to work effectively in the open office suite OpenOffise or Libre Office.
If you're tired of standard Microsoft Office, why not download open office for windows 10. This is absolutely free program, which does not require the purchase of a license. It is suitable for both organizations and individuals who do not have the opportunity to purchase paid product from Microsoft.
What does OpenOffice consist of?
It contains all the necessary tools both for working with text on Windows 10 and for creating/editing tables.
- A text editor similar to MS Word.
- A program that allows you to create spreadsheets, diagrams, edit, manage them.
- Graphics editor. Its interface is similar to Corel Draw.
- An editor for working with presentations.
- DB (database) editor.
- Formula editor.
It is clear from the list that the program indeed contains everything you need to work with texts, and more. The functions of OpenOffice are almost the same as those of Microsoft Word.
The program supports all modern file formats and works successfully with them.
Spell check
This function is available in any modern editor, but it is not suitable for professional work, because he cannot thoroughly check the text and find all the errors. Of course, it will help with some things; you will not make basic mistakes.
This is a text editor that is very similar to Office from Microsoft. It contains all the same features. The only difference is the placement of the text controls.
It's pretty powerful tool creating tables containing many useful functions. In certain options, Calk is even better than good old MS Excel. It contains many formulas and templates for diagrams.
If you need to create a high-quality presentation, this tool is for you. Impress can easily replace Power Point, since its functionality is identical, even better.
This modest tool, to put it mildly, is rather bad, because its functionality leaves much to be desired. The set of tools is very small, the interface is inconvenient.
This is a database application. It contains wizards that allow you to customize tables and forms. Everything is very convenient, working with OpenOffice Beis is a pleasure.
Math
A high-quality formula editor that can be safely recommended for use.
How to install the program
OpenOffice is often easy to install. Go to the official website and download it, you can also find an installer on the Internet that can be downloaded via torrent. After downloading executable file free in Russian without registration, you should launch it, then indicate where to install Office, and also select necessary programs and components.
– free office programs, which serve as an excellent replacement for the well-known and expensive Microsoft Office. Everything is at your disposal necessary programs for the office, which are considered complete analogues Word, Excel, Powerpoint and others. In addition, you can easily work with the same document formats to which you are so accustomed. You can download OpenOffice for free in Russian directly on our website, without registration or SMS.
A new version OpenOffice programs received a bright and pleasant design, as well as additional features for your work. It is impossible not to say that Current Package was created not only for full, free replacement office we are used to, but also to make working with it easier. All the functionality of the program is more acceptable, and you can easily understand its settings. When saving edited or created documents, you can choose OpenOffice.org or Microsoft format.
OpenOffice can be legally used in businesses, schools or homes, and is not owned by commercial distribution. Another big advantage of these programs is autonomous operation from a flash drive. You don't have to install the program; you can run it directly from a flash drive anywhere. There is a new, standalone version of OpenOffice Portable for this.
Russian language in OpenOffice:
To install OpenOffice in Russian, you need to download the free file offered below in this article. Run installation file, and follow the instructions. Since this is a Russian version of the installer, you will not need any additional actions. Just install and go. In case you need Ukrainian language, you will need to download language pack OpenOffice. You can download office programs for free using the link provided at the end of this article.
OpenOffice- it's free office suite free software, which in turn is a complete alternative to its world famous paid competitor Microsoft Office. Featured on this site openoffice package taken from the official website, therefore completely safe.
With this program you can perform all the functions as in Microsoft Word (Writer). Main advantage Open Office it's free - place it wherever you want and as much as you want. If you compare it with Microsoft Word, then all the functions that are available in the open office are similar, and in some places they are superior to their competitor. By analogy with Microsoft Office, Open Office has at its disposal word processor(analogue of Word), tabular, presentation, graphic, mathematical, vector graphics editor. With this extension pack, you can perform any spectrum necessary tasks, be it a presentation or a quarterly accounting report.
Writer is as easy to use as Word and supports all common document formats.
The developers decided not to create a twin brother, but to do something new and very easy to use. And we can say with complete confidence that they did it perfectly. 
It is worth paying attention to Latest updates for the office. The first thing that catches your eye is the nice design and advanced functions. All functionality of this product has been further simplified for the user.
Simplifications were created specifically for students, schoolchildren, and those who have little experience in working with PCs. The settings are very easy to understand, and it’s not at all difficult to set up work software product specifically for your tasks.
Also, when saving documents, you can explicitly specify the file format, that is, save the text in Open Office or Microsoft Office format, which is very convenient in terms of compatibility. For example, if you created a document in an open office and want to open it in Microsoft program Office 2003 or later earlier versions, we advise you to immediately save the text in Microsot Word 97/2003 format.
OpenOffice is legal program, which large enterprises are beginning to install, educational establishments. This product is not commercial.
The most important advantage of this program is that it can work autonomously from flash drives (portable version).
In order to establish yourself this program, no need to make hundreds of tedious clicks on links. Open Office can be downloaded for free via a direct link from our website, downloading which will only take a few minutes. And you will be able to independently evaluate all the delights of working with the application, as well as see the latest improvements to the popular office suite.
There are very few flaws in Open Office and they are insignificant, which in turn cannot in any way affect quality work with important documentation.
Our users choose Open Office for its simplicity and ease of use, and it is also free and unpretentious to computer resources, which in no way limits its rich functionality. A variety of settings in document design is the most important thing in similar programs. And again, learning to use OpenOffice is very easy, it comes with the program detailed instructions manual.
