Detailed installation of Windows 7 from a flash drive. Windows command line. Reinstalling the system in a few simple steps
How to reinstall Windows 7This detailed instructions After reinstallation, Windows 7 is designed for any level of user, even for dummies. To reinstall Windows 7 quickly and without consequences for important information, you need to prepare data and HDD to install a new system. Let's do the entire Windows 7 reinstallation step by step together. Let's start with the old one operating system, which is installed on your laptop or computer now.
Preparing to reinstall Windows 7
Any complete reinstallation Windows 7 on a laptop, netbook or computer should start by saving important information to another separate media. For example, on a flash drive or external hard disk. Surely you have important information that you need to save to avoid its loss.
Here you need to proceed from what OS is installed on the computer now. For example, if you want to reinstall XP on Windows 7, you may need to look for your information in other places than in Windows 7. In any case, double check all possible logical drives, all folders. The most common places where most users store information are:
1. Desk.
2. “My Documents” folder
3. Drive “C:”
Of course, tell me everything important places We cannot store information on your laptop or computer;). But the advice is to double check everything, since our goal is to reinstall Windows 7 on a clean, formatted logical drive. Why is the advice to reinstall Windows 7 on a clean media?
Firstly, for many users during their work old system Several viruses appeared, which is not necessarily the case, but it is possible. By the way, many people decide to completely reinstall Windows 7, precisely because of viruses. This is the last measure; you can always try to unlock the computer using an antivirus or try to remove the banner through a system restore point.
Secondly, installing Windows 7 on an unformatted logical drive will only add to problems in the future. After all, all the programs that will still have to be reinstalled will remain on it, as well as the folder with old Windows.
Selecting Windows 7 version
Before we begin to describe the installation of the new OS, a few words about the distribution of your Windows 7. This OS, like the previous Vista and subsequent generations, has two branches: 32-bit and 64-bit. The 32-bit version of the system does not allow the use of more four gigabytes random access memory . This is due to the peculiarity of the architecture. How to reinstall licensed Windows 7? There are several versions of the operating system:
Windows 7 Starter. This Windows version 7 can hardly be called a full-fledged OS. Almost all functions in it are blocked by Microsoft. Windows Starter was installed on some laptops. The maximum possible amount of RAM that this 32-bit version of Windows can use is 2 gigabytes.
Windows 7 Home Basic(Home Basic). Has a very limited set functions. Also distributed as OEM version with laptops. Maximum volume memory - 8 gigabytes.
Windows 7 Home Premium. Suitable for most users, allows most users to use necessary functions.
Windows 7 Professional. Almost full set functions.
Windows 7 Enterprise and Windows 7 Ultimate. Top versions, one of which is intended for business, and the other for home use. Everything is described in more detail in the table.
It is not recommended to use non-original assemblies, of which there are plenty on the Internet. This is especially true for laptop owners. The fact is that such assemblies may contain errors disabled Windows services 7, and just surprises in the form malware. Now seven is not so expensive, and you can buy Windows 7 by becoming a license holder.
Reinstalling Windows 7 from a USB flash drive
To reinstall Windows 7 from a flash drive, you need to have on hand one of the versions presented in the table above (the main thing is not Starter :)). DVD drives are not widely used today. Instead, they were replaced by flash drives. Reinstalling Windows 7 from a flash drive, without a disk, is more convenient. USB flash drive You can always take it with you, without worrying whether your computer has a DVD drive or not. In addition, not all laptops are equipped with drives.
To do bootable USB flash drive with Windows 7, just write down ISO image your new system with a special program. The process of creating a flash drive with Win 7 is described in detail in the article “How to make a bootable flash drive with Windows 7.” Program for Windows reinstallation 7 mentioned in the article should help. We hope there will be no difficulties.
After you burn the image to a flash drive and save important data, you can begin reinstalling Windows 7. Reinstalling Windows 7 via BIOS is not as complicated a procedure as it might seem at first glance. To do this, you need to reboot and enter the BIOS, then set to boot from a flash drive. Next, exit the BIOS, saving the settings. The computer will select the drive and begin installing Windows 7.
How to reinstall Windows 7
Let's get started step-by-step reinstallation and find out how to reinstall the Windows 7 system. After downloading the installer, we get into the system step-by-step installation. In the first step, select the language, time format and keyboard settings, here you can leave everything as default and click the “Next” button.
At the next stage, we begin installing Windows 7 by clicking the appropriate button.
Select the version of Windows 7 for which you have a license key.
We accept license agreement by checking the box and moving on to the next step.
At this stage you need to select the item “ Full installation", because, as they said earlier, it is better to install Windows 7 from scratch.
Next we get to important stage installing Windows 7. Here you need to select the partition on which the new operating system will be installed. Remember that we asked you to keep all important information? It's time to format the logical drive with old Windows. To do this, let's move on to the next installation stage.
Select the desired section hard drive and click on “Format”. This is reinstalling Windows 7 with formatting the logical drive.
If you have saved all important data, feel free to agree. If not, then there is still an opportunity to do this by restarting the computer and specifying the hard drive in the BIOS.
Our disk for almost reinstalled Windows 7 has been created. Those who need to increase or decrease its volume can use the “Expand” button.
After a short installation, the installer will ask you to enter your name or nickname, as well as name your laptop or computer.
At the next stage of reinstallation, you need to enter a password. This may not be done if only you use the laptop or computer and a stranger cannot access it.
Long-awaited input serial number licensed copies of Windows 7. You have it, right? ;)
In the next reinstallation step, you will be prompted to install built-in Windows protection. This, of course, is not a full-fledged antivirus, but it will save you from certain types of attacks. True, a firewall can become a problem when connecting a laptop or computer to the network. Therefore, the ideal option would be to install third party antivirus and shutdown Windows protection 7 after that.
The final stage of reinstalling Windows 7. If your computer or laptop is at home, then choose home network. For most users, this is the network configuration option they need in Windows 7.
After selecting the network type, Windows 7 will finally boot.
This is the instruction on how to properly reinstall Windows 7 on a laptop or computer
Working with a computer, especially when the Internet is connected, is always walking on the edge of an abyss: any operating system is forced to withstand daily powerful attacks hackers, all kinds of viruses, the purpose of which is sometimes not only to pump your Internet traffic, but also to completely destroy the system. You can correct the situation, clean out destructive viruses and restore your computer's operation by completely reinstalling the system. Of course, this is a very responsible task, requiring knowledge of all the nuances of the work, but it is not so difficult. We will tell you further about how to reinstall Windows 7 from a flash drive.
So, how to properly reinstall Windows 7 from a flash drive? Let's start by saving all the data we need on any storage medium. This can be a disk, flash drive or a separate hard drive - choose depending on the amount of information to be stored.
You need to save the information because after reinstallation, all data will be completely and irretrievably lost, and the only way to restore it is by downloading it again from a third-party memory source.
But a beginner often has a question: where to look for the data necessary for saving, what exactly to save... As a rule, the most important files stored in:
- folder "My Documents";
- "Downloads" folder;
- Downloud folder.
When we are sure that what is necessary for further work information saved on third party source memory, we can start choosing future system, after which we will begin the reinstallation.
Windows 7 versions
First of all, let's look at the issue of operating system generation branches:
- 32-bit, targeting RAM no more than four gigabytes;
- 64-bit, or professional, designed for serious work and supporting large amounts of memory.
In addition, Windows versions are divided into:
- Initial or Starter. This is the most basic version of the system, which only includes basic set work functions. This option excellent for tiny amounts of memory (no more than 2 gigabytes), which are typical for office work, but not acceptable, for example, for downloading computer games or serious programs.
- Basic home version Home Basic is a more advanced version that supports memory up to eight gigabytes. Designed to work with both laptop and desktop computer. It is the most common version of the system for the simple reason that it is not burdensome for the computer, is easy to install, configure, and, moreover, supports all major programs and games for individual use (not for enterprises that require an extensive network that consumes much larger amounts of RAM) .
- Home extended or Home Premium version is also the most common option and includes an even larger list of optional features than the previous option.
- The professional version is the most suitable option for those who prefer to work on high level and needs a large amount of information and large optional capabilities.
- And finally, the last point - corporate and maximum version. These are the top variations of the Windows 7 system, which provide a rich set of working functions, almost unlimited scope for work and creativity
Based on personal preferences and the capabilities of their computer, everyone chooses their own type of system. And now we in detail Let's dwell on this nuance: how to reinstall Windows via a USB flash drive.
Before moving on to the main question, let's do small retreat and we will touch on a topic such as a program for setting up sound on a computer, which is designed to solve problems when acoustics disappear after reinstalling the OS or improving sound quality. Read about methods for connecting and setting up a printer on a computer.
Reinstallation instructions
On currently DVD drives are gradually becoming a thing of the past: not all laptops, and especially simplified miniature netbooks, are equipped with drives. And this forces you to search alternative methods download information. This method can be a regular flash drive. To the question of how to properly reinstall Windows 7 on a laptop, we will answer simply - the first thing you need to do is burn the image of the reinstallation disk onto a flash drive. An ISO image of Windows 7 is written using special programs (Nero, etc.) and this usually does not cause any serious difficulties, all the work takes a few minutes and is done in a few mouse clicks.
Once the disk image is recorded, you can begin the reinstallation process.
Work is carried out through the BIOS. Many novice PC users immediately feel a state of panic and horror at the mere mention of this obscure abbreviation. But don’t be scared: you’ll now find out how to reinstall Windows on a laptop from a flash drive, and believe me, there’s nothing catastrophically terrible about it - it’s a common thing that, having done it once, you’ll easily do later and... who knows, maybe... it’s good to make money from this, because they’re good, knowledgeable programmers always in price, and there are so many dummies... and installation via BIOS is one of the mandatory and most common procedures for a programmer’s work, making it possible to save even those hopelessly clogged with system-deadly viruses caught on the Internet.
So, reboot the computer and enter the Bios. Now we set the boot from our flash drive and wait for the installation process to complete. At this moment we don’t press anything, we just wait!
After the download occurs, exit the Bios and save the data. Now the computer is ready to install Windows 7.
In order for the installation to proceed correctly, set the date and time and click “Next”.
In the window that opens, confirm the installation of Windows 7.
We choose the version that is most suitable for you.
ATTENTION: The next step will require an introduction license key. We enter the key and confirm the license agreement, after which we move on to the next stage of the boot process.
Check the box under the “Full installation” window, select the partition where Windows will be installed and click “Format”. At this moment it will begin full formatting logical drive (this is why it is important to save the necessary information in advance).
The next step is simply confirming the operations - feel free to click “Next”. A few seconds of loading will pass, and the system will prompt you to give the name of the PC and indicate a nickname. Here you can use all your imagination, the main thing is not to forget the names that you enter in the window that opens. We indicate the password and, oh finally! Enter the license key.
The system will automatically prompt you to reinstall the firewall - feel free to agree, but in the future, install an additional antivirus.
How to properly reinstall Windows 7 without a flash drive
How to reinstall Windows 7 without a flash drive, you ask. Elementary Watson.
Go to the Start menu and find Control Panel, after which you need to go to “Recovery”. In this tab we are interested in the very bottom line called “Advanced recovery methods”, we need to run it to call the following working window disk formatting. Confirm formatting and select the type of system restore to factory settings. After the work is completed, you will receive a system that is free of all viruses and works properly.
How to reinstall other OS from a flash drive
Windows can be installed on Android, tablet, and other OS. This is even easier to do than on a PC.
We connect the keyboard to the device and in order to enter the BIOS, press the “F2” button. Now we no longer need the keyboard, and in its place we connect a flash drive. We confirm the installation of Windows and wait. Each time the system asks for confirmation to continue downloading, click “Next”. When the reinstallation can be completed, reboot your device and start from scratch.
We have considered all the nuances of the question of how to reinstall Windows on a computer from a flash drive and without a flash drive, as well as how to reinstall other operating systems. I hope this article was helpful to you. Good luck!
You don't need to buy a disk and drive to install Windows 7, as you can install the operating system from a USB flash drive.
Inexperienced users puzzles the question - how to install Windows 7 from a flash drive. Not everyone knows how to install from a disk, and even fewer know how to install from USB. In fact, there is nothing complicated; it is important to strictly follow the installation instructions and not break the sequence of steps. Let's immediately decide what you need USB Flash or an external hard drive with a capacity of at least 4 GB. The file system in which the media is formatted does not matter. In addition, you can even burn the image to an SD card or external device, for example, an MP3 player, which is recognized on the computer as a flash drive.
Installation sequence
If you are installing the OS on blank disk, then you don't need to care about its contents. If you are reinstalling the OS, remember that the disk on which you are installing the system will be completely formatted, which means that all data on the disk will be deleted. Therefore, the very first step you need to think about is what files you need to save. Next, follow the following instructions:
- Download the OS;
- Create installation media;
- Changing BIOS settings;
- We start the computer from an external device;
- Follow the instructions for installing the OS;
- Install drivers and update the installed OS;
These 6 steps are similar for all versions of the operating system; the scheme also works for other versions of the OS, including Windows Vista or Windows 8.
Where to download OS
You need to download not just system files, you need an ISO image suitable for writing to a flash drive. You can download it here. Already at this stage you need to decide which version of the OS you need. The question is not only whether you will use the “Home” or “Professional” version, but also what bit capacity it will have - 32 or 64 bits. After you decide on the OS version, download it to your hard drive.
How to write an OS to a flash drive
If you simply burn the distribution kit to USB, then you will not be able to run the OS from it, nor can you run the installation from a flash drive. To create bootable media you need to use specialized software. One of best programs for creating - . Let's look at creating this utility as an example. First of all, open our ISO image of Windows 7 inside UltraISO:
You need to choose not only the drive, but also the recording method. Select USB-HDD+, you don’t need to touch other settings.
How to start installation via BIOS
After you have created a flash drive with seven, you need to boot your computer from it. To do this, you need to reboot it and during system startup go into the BIOS and specify the startup sequence. Depending on the BIOS version, entry is available using the F2, Del, Esc keys, but there may be other keys. Inside the BIOS you need to find the BOOT tab, where you can specify the startup order. Your media must already be in the device, otherwise you will not be able to specify it to start when you start your PC. The loading sequence should be something like this:
After making changes to the BIOS, they must be saved and exited. Then the system will automatically reboot and start from USB.
Installation
After the start, the installation of the system itself will begin. If you downloaded the Russian version, then the entire installation will be accompanied by Russian instructions and recommendations. Just follow the instructions that appear on the screen, and within 20-30 minutes the operating system will be installed on your computer. If you have any questions, look at the instructions:
Don't forget that the hard drive where you install the OS will be formatted. This means that all data on the disk on which you are installing new system, will be deleted. Therefore, you need to take care of their preservation in advance.
Setup and updates
After installing Windows 7 on your computer, it’s too early to relax. Next you have to configure the system, and then install all the necessary drivers. For settings and drivers you can use the following programs:
- DriverPack Solution;
The first program will optimize the operation of the system. The second program will automatically install everything necessary drivers. During setup, be sure to create backup copy OS, as well as the first restore point, which will be useful to you in the future if you have any problems, for example, you encounter errors.
Although the title of the article is how to install Windows 7 from a flash drive on a laptop, the same method is used to install Windows 8, Vista or XP.
Why did I decide to write about this, since there are plenty of materials on this topic on the Internet? The thing is that I have never tried to install with windows flash drives on a laptop (netbook) - there was no need.
And just recently, an acquaintance approached me with a request, or rather for advice, why Windows 7 was not installed on his laptop.
The reason turned out to be drive failure. I decided to help him and install from a flash drive. I turned to the search engine for information, but according to the instructions written there, I could not install the operating system via a flash drive.
I had to experiment. That’s why I decided to describe the installation process; I think I’m not the only one who had problems.
I should immediately note that the laptop was old (more than 10 years), but the installation was successful. True, in some “antediluvian” it may not work out ( motherboard this option may not be supported).
I’ll also say right away that I’ve come across a statement online that if the flash drive is 3.0 and usb 2.0, then the laptop won’t see it during installation. This is not true, I just installed with 3.0, on an old laptop with usb 2.0.
So, what do you need to install windows from a flash drive (memory card)
- Flash drive of at least 4 GB (memory card).
- Operating system image in ISO format.
- WinSetupFromUSB program.
Program for installing Windows 7 on a laptop via USB flash drive
First you need to write down Windows image 7 per flash drive. The network suggests using special programs or in a standard way. Last method For inexperienced computer owners, it can be dangerous.
After my experiments, I settled on the “WinSetupFromUSB” program. It is free and the old versions are translated into Russian.
I used the latest (English - everything is clear without words) version and I recommend it to you. Where and how to download/install the program - what is written below is a little outdated (meaning downloading from the official website).
Now, after downloading, you need to install it. There will be two: for 32-bit laptops and 64. Run the one that matches the bitness of your operating system.
After launch, the program will immediately determine which flash drives you have enabled and display them at the very top. You will need to check two boxes (the first one, if the flash drive is formatted, is not necessary; the second checkbox is opposite the one you are installing Windows versions).
Then (when the checkbox is checked), with right side on the contrary, an icon will become active, by clicking on which you can tell the program where the Windows image in ISO format is located.
When you’ve done everything, calmly click on the “GO” option at the very bottom - the program will do everything on its own (format the flash drive and write a disk image). See fig.
Setting up a laptop's BIOS to install Windows 7 or 8 from a flash drive
This is where the most crucial moment begins. I can’t even describe it exactly, because there are so many models of laptops or netbooks: ASUS, HP, Acer, MSI, Toshiba, Dell, Samsung, Lenovo, Sony, eMachines, Fujitsu, Apple, Notebook, LG, IBM, Compaq, Intel , BenQ, DEPO, Medion, Clevo, NEC, Gigabyte, Gericom, Packard Bell, Gateway, Matsushita (each of them has a unique installation from a flash drive).
Bios is also not the only one. It could be American Megatrends(AMI), Award Software or Phoenix Technologies. First of all, you need to enter it, although not always (you can try to start installing Windows immediately after burning the image to a flash drive, just read the article to the end).
No one can tell you exactly how to enter your laptop’s BIOS and configure it to boot from a flash drive. Even if you have, for example, two acer laptop, with the same BIOS versions, but different motherboards - the settings may differ significantly.
Choose correct decision Only experiments with your laptop will help you. Login to his bios special problems will not be. Usually, immediately after turning on, diligently press the key: F1, Esc, F2, F10, Del or Alt combinations+ F1, F10 = Setup. If you fail, experiment yourself top row keyboard keys.
Not everything is simple here either. It would be good if there was a USB HDD item, as in the picture below.
But this doesn’t always happen – I didn’t have it. Other lines may also be responsible for loading from a flash drive, I had “remowable device”, but it could even turn out to be “innostop” and who knows what else.
Don't look at the floppy, it's a different drive. In a word, experiment here again. When you find it, click on it (press enter) and put it first in the list.
Then press F10 and enter. The laptop will begin to restart. In theory, the download would start from the flash drive, but this did not happen for me (perhaps it will be different for you).
To start installing Windows from a flash drive, I had to press the “ESC” key immediately after turning it on. Then a window appeared asking you to choose where the computer should start booting from.
I pointed to the flash drive. Then another window appeared as in the figure below.
If you have the same thing, then click on the first one and it will immediately start on your laptop from a flash drive (by following the link, you will find out what to do next).
TIP: if something doesn’t work for you with the BIOS settings, write to Google search engine“BIOS pictures” and when you find a picture like the one in your BIOS, follow this image to the site.
Most likely you will find it there detailed description, if not, describe the problem in the comments - we will find a solution together.
That's all. No one will describe it to you exactly step by step, just look at the pictures and press the appropriate keys.
Each laptop has its own configuration, and without your own experiments, you are unlikely to be able to install Windows from a flash drive. Good luck!
Hello my dear visitors and readers!
Since I’m used to always installing the OS from a USB stick, I decided to make a detailed article describing this aspect of the work in more detail, including all kinds of programs. Today I will tell you how to prepare a flash drive for installing Windows 7, using all the available software that is on the Internet. The material will be voluminous and interesting! Go!
What kind of flash drive do you need?
So, let's first figure out what kind of media we need fits better Total. Since we are dealing with the seven distribution kit, it is important for us that it fits on our media. Therefore, we will initially discuss the volume. It must be at least 4 gigabytes. I always advise you to take an 8 GB device for these needs, so that Windows fits, and several software, and drivers are also on a flash drive. It is convenient to work with such a card even through rufus program.
They are inexpensive, especially if you choose the right characteristics and brand, so I advise you to choose such flash drives.
USB type. Today, technology has stepped far forward and laptop manufacturers offer us computer models no longer with two standard USB 2.0, and with two more additional USB 3.0. The differences are precisely in the read and write speeds. In old standard connectors of the second version, writing occurs at 21 megabits per second, and reading at 34 megabits per second.
But the new 3.0 is much faster. They record on them at a speed of 30 Mb/sec. but reading is 68 MB/sec. That is, on modern ports and media, we can work faster, and put files there, and then transfer them to the hard drive when installing Windows. This is very convenient; it allows you to quickly create an installation device in ultraiso.
Now let's look at the manufacturer. The most expensive flash cards in Russian Federation from Sony, Samsung and Apacer. Yes, they are of very high quality, have a modest minimalist design, but there is no particular desire to shell out one to one and a half thousand wooden ones for them.
At the same time, Prestigio, Silicon Power, Pretec and PQI are cheap, but the quality of the media leaves much to be desired. Such devices live for 1-2 years, and then they slowly die, and at the most necessary moment, your mobile container may simply not be identified as a laptop.
I advise you to choose companies such as Transcend, ADATA and Kingstone. They are quite cheap and have excellent quality. Well, the design from these companies is amazing.
Distribution
Since we will be making a bootable mobile hard drive with an operating system, we will need the most maximum Windows.
For old cars worth downloading 32-bit version.
For powerful computers 64-bit version.
If you don’t know what to download, then here is the link to the torrent client program. Let's go and click here.
Then scroll down and click here.
After downloading, click on this downloaded file.
In the window that opens, click this rectangle.
Then this agreement will come out, just click Further and that's all.
Everything is in the same spirit, we continue the installation with this button.
Check all the boxes and click the green rectangle.
Now do the same thing, check the boxes, press the button.
The installation of the software itself should include checking the hardware of your computer.
Then we just finish.
This is what the working interface of the program looks like.
Burning a USB flash drive via Windows 7 USB/DVD Download Tool
Download the utility you can here.
So, open the program and find through it our downloaded image with Windows and click next.
Now we choose what we will write, a flash drive or a blank. Since we have a mobile device, we click USB device.
We insert the card, select it in the software and click continue copying.
In the pop-up window, confirm with the button “ Yes».
We are waiting for the files to be written.
That's it, the device is ready.
Burning a flash drive via WinSetupFromUSB
Here we look carefully.
- We choose our medium. Do not confuse this with an optical drive.
- You need to tick the boxes as indicated in the figure. Make no mistake, otherwise the computer simply won’t see the flash drive.
- In this position, set the path to the downloaded Windows image.
- Press start.
If everything went well, you will see this picture.
Burning a flash drive via UltraISO
Download UltraISO you can here.
So, we always run the software as administrator.
Then we press the open button and find our image.
Then click on bootstrap and then select this position from the list.
Here we set our flash drive, then the recording method and click record. There is no need to format it, since the media will be completely erased anyway.
After the final, you can use the flash drive as bootable media with Windows 7.
Burning a flash drive via UNetBootin
Download the software you can here.
Let's launch software on behalf of the administrator. In the interface that opens, set Standard-ISO and select our operating system image.
After pressing the button OK the process itself will begin.
In the end, you will be asked to immediately restart the laptop or simply exit the program.
The device is ready.
Recording via the command line
No matter how strange it may seem to you, you can also create a bootable USB flash drive in the operating system itself via the command line. This is how it is done.
If you write through Windows 7, then press start and open the command line right click on behalf of the administrator.
If you decide to work in the tenth OS, then enter the required command in the search and again open it as an administrator.
In the black window we write the command from the keyboard diskpart.
Now type one of these commands - “ list disk», « list volume" And " list partition", which will help you see the available logical drives on your laptop.
Now enter the commands as in the figure below. Everything is in order and exactly as in the picture.
Be careful, patient and vigilant.
That's it, the flash drive is ready, all you have to do is install the distribution on it
For this download from here archiver 7-zip. Let's launch it.
In the working window, select the image with Windows, click on extract archive from the top, then select the media itself and click OK.
That's all. This is how a flash drive is made via the command line.
Creating a flash drive in Rufus
Download it yourself software Actually through the program rufus flash drive recorded much faster than through all the software described above.
And so we open our Rufus. In the first line, select the device. In the second section, we set the recording method to be the same as in the picture. File system we leave it as it is. We tick the three lowest ones. Click on start.
A warning window like this will pop up. We agree with him and go Further.
All is ready.
Recording via WinToBootic
Download the program from here. Then we open it. The flash drive will determine itself, we need to check the box for quick formatting and press this button.
The process of creating a boot media will begin. As soon as it is completed, you will see this window.
Done, you can use the flash drive.
Recording via WinToFlash
Another small popular utility is WinToFlash. You can take it right here. Download and open. We see this interface and click this huge green check mark.
Since we have already downloaded Windows in an image, we simply select this bottom item in the menu.
Now select the image and the flash drive itself. Again, I warn you, do not confuse it with an optical drive.
A window like this will appear asking you to familiarize yourself with the license. Just click here.
That's it, the recording process has started. You have to wait until it's over.
As soon as everything is over, press exit.
All is ready.
Additional settings
You have created a flash drive, what next? Now you need to configure booting through the BIOS. Well, or via UEFI, if you have a re-flashed macro chip. Otherwise, the computer simply will not be able to see your device, and installing Windows will be impossible.
Here's a video . It will help you figure out what and where to poke in the system so as not to harm your computer.
Conclusion
This is where I will end the article. As you can see, you can also create a flash drive without programs, but it will take more time. I tested all the methods myself, everything works one hundred percent. The only thing I want to warn you is that none of these methods work on MacBooks, since all the software is intended only for the operating system Windows systems from Microsoft.
Do not forget to copy files from the flash drive, if they are there, since when formatted they will disappear irrevocably and you will not be able to restore them.
Share this useful article with your friends on Odnoklassniki, Facebook and others in social networks. Subscribe to my blog updates and then you will always be aware of the publication of new materials. All the best to you and see you again, my dear readers and aspiring programmers!
