Is it possible to charge an iPhone with a non-original charger? iPhone does not charge using a non-original charger, what should I do?
One of my friends bought an iPhone 6S and went on a business trip, and of course, according to the laws of the genre, he forgot the charger, had to unfamiliar city to look for a new one, and this is not Moscow for you, the ordeal ended in a nearby stall, or rather, he thought it was over, in fact, it was just beginning.
He came to the hotel, went to bed, and of course he put his phone on charge beforehand; in the morning he wakes up and notices a suspicious smell. Nevertheless, there is silence in the building, the fire sirens do not howl, he raises his head from the pillow, and his precious iPhone has already begun to smoke, and the wire has already turned black.
Naturally, the phone did not turn on that day. And it didn't turn on at all. Having returned home, my friend contacted the service center, where they calculated him a tidy sum and told him many scary stories related to non-original iPhone chargers. My friend's phone had the wrong charger, the bottom cable and Q2 assembly were damaged ( USB PROT 5V), which is the protection of the phone, was also destroyed USB controller and charging.
Repairing iPhones is not a cheap business, the microcircuits in this sophisticated device are soldered with lead-free solder, due to the fight for the environment, but at the same time the solder becomes very fragile, if the microcircuit is not filled with rock-hard epoxy, it will immediately fall off. Only very qualified craftsmen can remove the epoxy resin and dismantle the microcircuit.
In addition, a non-standard charger can be simply fatal to the user’s health; many accidents have already occurred due to the use of non-original chargers. The case of a Chinese woman who was killed received wide publicity electric shock when she was trying to talk to someone on the phone while charging. Although it was not possible to reliably establish the source of the fatal current, nevertheless Apple company apologized to the girl's relatives.
We hope fatal consequences can be avoided. It’s no secret that after a year of use, the battery in the iPhone does not charge because it’s new. Other parts of the phone may also break and cause much more damage. Representatives of a British electronics service company said that there is a correlation between the use of non-standard chargers and breakdowns of iPhone parts.
The British noticed that the vast majority of iPhone owners who contacted them with complaints about premature deterioration or failure were using non-standard chargers.
The repair specialists turned out to be materialists and put forward a scientific theory: the standard charger regulates the voltage in such a way as to prevent voltage and current surges, this happens because USB ports send pulses to the charger unit that control the supply voltage and current depending on the network voltage and the instantaneous consumption of the phone.
Non-standard chargers cannot do this, because their manufacturers, apparently, have not understood the control signals of the controller. Therefore, abnormal charging allows voltage surges that can damage phone parts.
Your phone is most likely damaged by abnormal charging if: even after long charging time the indicator shows a small value, the phone turns off unexpectedly, the phone does not want to turn on when charging.
A week ago, the unlucky owner had it while charging. And then the Internet exploded with discussions: why do smartphones burn when charging? Does this depend on the fact that the charger is not “original”? Will my iPhone crash one night when connected to a charger from AliExpress? CHIP hastened to reassure everyone who is concerned.
Yes, you can. The compatibility of a smartphone and a charger does not depend at all on whether it was produced by the same company as the smartphone itself. And if your phone supports wireless charging, then the manufacturer himself ordered it to be charged from devices from other companies. Because the standard wireless charging Qi is open and publicly available, and anyone can produce chargers using this technology. for details.
With wired charging, in fact, it’s the same thing - everything is regulated by standards. There's nothing wrong with charging iPhone charger device, for example, from the well-known Belkin. And charging from the iPad too. And nothing will happen to Samsung if you charge it with a device, for example, from Huawei. Or a no-name USB cable from a PC. Why - read below.
Why can a smartphone be charged with a non-original charger?
Because batteries mobile devices are designed to consume exactly the amount of energy they need to charge, or less, but not more. To do this, they are equipped with a controller that monitors this. This practice has been followed by all phone manufacturers since 2007, when the USB charging standard was adopted.
If your iPhone battery requires 1 A of current to charge, it doesn't matter what you charge it with. You can connect it to an iPad charger that produces 2 A - it will only take half the current from it, and will charge at the same speed as its original one, but will not burn out. You can connect it to USB port on a computer that gives 0.5 A - it will charge half as slow, but it won’t burn out either.
Thus, the law works here: consumption is determined by the consumer. Whether the phone burns or does not burn while charging depends on the integrity of the smartphone manufacturer, and not the charging. If you have a Chinese noname, into which the kind Uncle Liao installed a low-quality controller, it may burn out. And if the harried Chinese from the Foxconn factory installed a damaged battery controller in your iPhone, that can happen too. And if you yourself drop your phone every now and then, then even more so.
The charger itself may burn out if the manufacturer skimped on the quality of its assembly. The smartphone will not burn out - the fuses will not allow it. But to avoid this situation, it is better to take devices from serious assemblers - for example, from other smartphone manufacturers or from well-known companies that produce accessories, like Belkin.
Everyone is accustomed to the fact that any product with company logo apples are expensive, but if in the case of Apple technology While this is easy to accept, the price of branded accessories sometimes exceeds reasonable limits. We looked at how to extend life complete cables, but not all users are ready to resort to such tricks when they can buy cheap Chinese wires for ridiculous money.
But when saving on original charging cables, you need to be aware of possible consequences. The use of non-original chargers can not only be harmful to the environment, because they do not meet environmental standards, but also dangerous both for the equipment itself and for the lives of users. There have been cases where non-original chargers have caused iPhone batteries to ignite, resulting in fires and burns for users. Apple even organized an exchange program for Chinese users on this occasion, when in the near future Apple Store you could return a non-original charging cable and get a discount for purchasing branded accessories from Apple.
Another widely known problem when using Chinese cables and chargers is the incorrect behavior of the display sensor when charging, which manifests itself in the form of false clicks. Incorrect voltage or current results in lower potential static currents that are detected by the device as touch. This behavior will not affect the performance of the display in any way and does not have negative consequences, but it does not allow you to comfortably use the device while charging.
With the appearance in Apple devices fingerprint scanner finger touch ID it turned out that static currents also affect its operation. Some users noted that it stopped working when using non-original chargers. Touch ID is a complex sensor that is extremely sensitive to any influence. The worst thing is that if something happens to him, he won’t be able to get away easily. normal replacement the buttons are the same as before, but you’ll have to change everything motherboard device, which will cost almost the full cost of the device itself. Every touch sensor ID is unique and tied to the processor specific device forever. That is why you cannot even change the cable to Touch ID to a non-original one. This can happen during renovations. broken display in unskilled service centers. Any impact on Touch ID will cause it to simply fail. This necessary measure security, which guarantees the safety of data on the device and safe Apple work Pay.
This is why you should not use non-original chargers and cables. There is little chance that this will cause the device to catch fire and you will be in the news, but it is likely to affect Touch work There is an ID. Buying expensive iPhone or iPad, it’s stupid to skimp on original cables - if something goes wrong, the repair will cost you significantly more.
Added: As user maka correctly pointed out in the comments, not all non-original chargers are the same. Apple has MFI (Made for iPhone, iPad or iPod) certification, which it issues, or rather sells to third party manufacturers. This certificate also applies to charging cables and power supplies. If a product bears the MFI mark, Apple guarantees that it meets all safety standards and regulations for use with its devices.
Despite the “advancement” of most Apple smartphone users in using accessories, they sometimes have difficulties. So, many on the forums are interested in how to charge an iPhone 5 with a non-original charger. And although using non-original add-ons for Apple devices is generally not recommended, this does not stop many. Enough big number Users, wanting to save money, use Chinese chargers.
What does this lead to? A number of users complain that when they start charging the gadget, or try to exchange data via iTunes, the system displays an unpleasant message on the display. Namely, it writes that this cord is not original, and therefore it is not supported by the device. Our article will tell you what to do in such a situation and how to charge the device.
Similar messages began to appear for the first time on the “fives” with iOS 7. On newer versions of the “OS” the same thing happens, only the text of the message has become longer.
The reason such messages appear is that the user is using a fake Chinese USB cable. Of course, it does not have certification, nor is it original.
The real accessory – Lightning – has a rather complex structure inside. Its “filling” hides a microcircuit with four microchips. The mechanism of their operation is unknown to the common man. As well as the functions of each of the chips are unfamiliar.
However, we can say that one of the controllers switches the contacts to which the iPhone is connected. This is a Lightning connector, which is double-sided and can be inserted into the connector at absolutely any end.
It is responsible for efficient and secure data exchange between an iOS device and a PC when interacting with iTunes. And also when flashing OS firmware.
Of course, users who prefer the Chinese cord to the original one can be understood. After all, for the last App Store you will have to pay about 2000 rubles. And this is just for 1 meter of wire and 2 connectors, one of which is a primitive USB.
A required element of the original Lightning cord
Companies producing accessories supported users and offered their own analogues. But chasing low value production costs, many companies (mainly from China) do not add the necessary chips to the connectors so that they at least comply with the MFi license. We’ll tell you what this concept means further.
Fake Lightning cable: signs
MFi is an acronym that means the product is made for the iPhone. This is a kind of license for third party companies, producing accessories compatible with iOS gadgets.
These symbols printed on the product mean that the cord or other accessory was produced specifically to interact with the Apple device. At the same time, it goes without saying that it has been certified and meets Apple standards. A device charged with such a cord will not have any problems.
Apple is responsible for such products, and for this it receives a percentage of their sales. All this in theory means that these accessories cannot harm the iPhone.
Except high price, real USB cords have another drawback. Their wear-resistant properties are very low - they quickly become unusable. Therefore, a number of users preferred Juicies+ with lightning connector to them. And, I must say, we did not regret this step at all.
So, in order for your Apple device to charge well at normal voltage and current, and also to exchange data with a PC without errors, purchase, if not the original, then at least certified cable. The latter is also cheaper than the former. However, for those who do not have the opportunity to purchase either the first or the second, there is a method for recharging, flashing and synchronizing the gadget via Chinese cable.
What to do if the cord is not certified?
Sometimes the following steps are sufficient:
- Connect the cord to the iOS device.
- When a corresponding message appears on the display (that the accessory is not suitable), click on the close button for this SMS.
- Remove the block from the gadget.
- If the same message pops up again, close it again.
- Without removing the unit or doing anything else, disconnect the cord from the iPhone.
- Reconnect it.
These are the ones simple actions sometimes it is enough for everything to go smoothly. But if this algorithm did not help, do the following:
- Produce complete shutdown gadget.
- Plug the Lightning connector into it, and connect the other end to the charger or PC. The latter depends on your purpose, whether you need to charge or synchronize the device.
- Turn on the gadget.
- Once iOS boots, it should charge normally.
- If the connector is pulled out and connected again while the gadget is turned on, the charging process will stop again and the procedure will need to be repeated.
For jailbroken phones in Cydia, you need to find and install the “Support Unsupported Accessories 8” or “Unauthorized Lightning Cable Enabler” tweak.
But keep in mind that this will not provide a 100% solution to the problem. this will be a one-time method of getting out of the situation. The company can always block counterfeiting at the operating system level. In addition, the power controller may fail. The cost of repairs in this case will be about 5,000 rubles. and more.
Strange SMS when using original accessories
And one more interesting point. There are times when the user connects a real cord, but the system still displays a message that the accessory is supposedly not certified, etc. That is, everything is the same as what happens when you connect a Chinese cable. Such a misunderstanding can occur if the cord is damaged. Therefore, if you are 100% sure that the products you are using are of high quality, but similar SMS messages pop up, just check the cord for damage.
What to do if the Lightning cable breaks?
If damage is not visible, pick up a working cord to check (of course, it must be real). And then check the functionality of the gadget with it. If everything is fine, throw away your accessory and buy a new one.
It often happens that the connector becomes clogged. The essence of the phenomenon is that small debris constantly gets into this hole, which eventually clogs it. This is especially true for Lightning connectors.
At a certain point, so much debris accumulates that the cable contact in the connector is broken. And, of course, when you connect the device to the cord, the ill-fated SMS pops up. In this situation, the solution to the problem is to thoroughly clean the connector. This is done with a simple toothpick or a cotton swab dipped in alcohol. It is recommended to do the procedure with the device turned off.
A few words in conclusion
Usually, when purchasing an Apple gadget for the first time, users use the original accessories included with it. Including the charging cord. But later, when real products fail, many, not wanting to spend extra money, purchase Chinese fakes.
It's better to buy certified accessories, which are an order of magnitude cheaper than the original ones. But if in this moment your smartphone needs recharging, but you don’t have a high-quality cord at hand; you can use it once or twice cheap cable. But only in emergency situations without abusing it.
The original iPhone cable has two significant drawbacks: it is very unreliable and very expensive. And, of course, no one wants to pay 1,590 rubles (yes, that’s how much a charging cable made at Apple factories costs) for a cable that a priori will not last long, and therefore many decide to buy a non-original charger.
And having saved a fair amount (prices for non-original cables start from 100 rubles!), the happy user returns home, but bad luck - when he connects his iPhone to a new cable, he realizes that the gadget is not charging and does not sync with iTunes, and a depressing message appears on his screen inscription - " This cable or the accessory is not certified...” What to do in such a situation? Let's find out!
What can I say - for an ignorant user, this state of affairs is, to put it mildly, discouraging. There is a silent question in his eyes - “Well, how did my smartphone even know that I didn’t buy the charger for it in the App Store?!”
And, really, where from? Experts have different opinions on this matter. Some argue that the reason is a cunning mechanism built into iOS that recognizes the original wire by certain “beacons”, others that a special chip signaling authenticity is built into the charger itself. However, one way or another, the fact remains that Apple duly made sure that non-original cables do not work with the iPhone.
Not all non-original cables are equally non-original
However, here’s a paradox: on the Internet there are a lot of users who claim: “I bought a non-native wire and everything works!” In fact, no paradox, just according to the “law” Apple i-devices You can charge not only from cables made directly by the Apple giant - that is, original ones, but also from those made by partner manufacturers - the result is a non-original "part", but it has certification. These charging wires have a special marking - MFI (Made for iPhone).
The quality of products marked with this honorary sign is controlled personally by Apple. And, by the way, from each manufacturer working under the MFI program, Apple receives, so to speak, a “tax.” This fact leads to the fact that MFI chargers are more expensive than those that do not have such markings, but still not as expensive as the original ones. average price to non-original certified cable- 500 rubles.
Where can I buy an MFI cable for iPhone? In general, in any good store electronics. Ask a consultant and they will help you.
What to do if the iPhone does not charge using a non-original cable?
However, back to our problem, the cable has already been purchased and refuses to charge our iPhone or synchronize it with the PC. What to do? Good news! Users have come up with several “cheats” to all seeing eye Apple. We'll tell you about them all.
By the way, how do you know original Lightning is distinguished by its ability to work with a smartphone, no matter which side you insert it in ( this opportunity implemented according to the circuit, a special switch is installed in the cable chip), however, non-native Lightning may not have such an option (the Chinese simply forget to take into account the above-mentioned switch in the circuit), and therefore in order for the wire to start charging, it may simply need to be inserted on the other side.
"Close, close"
In some situations, in order for a non-original cable to start charging, it is enough to do the following:
1 Connect iPhone to charger or PC - depends on the task - charging or synchronization. 2 When a notification window appears about the impossibility of working with the cable, click on the “button” in it - “Close”. 3 Now you need to unlock the device - the notification will appear again - tap “Close” again and disconnect the wire from the iPhone (do not block it!), and immediately connect it again.
Surprisingly, quite often this strange instruction helps. Are you one of those lucky ones? Then let's try the next method.
Turn off and on
This Tricky Method to Work iPhone with non-original cable carried out as follows:
- Turn off the device.
- We connect it to a power outlet (if we want to synchronize with iTunes, we connect it to the PC).
- We turn on the smartphone and... it's charging!
By the way, if you now pull out the wire and insert it back, charging/communication with the PC will stop; to resume it, the iPhone will have to be turned off again.
Airplane mode
Some users, however, claim that there is no need to turn the smartphone on and off in vain; you can fool it simply by activating the airplane mode. Moreover, sometimes it’s enough to just turn it on, connect the smartphone to the charger, and when, as they say, the process starts, you can turn it off, but more often, you need to keep the airplane mode active the entire time it’s charging.
What are the dangers of using an iPhone with non-original cables?
Unfortunately, the fact that non-original cables do not charge the iPhone or do not sync to iTunes is not the main danger they pose. Hundred-ruble Chinese wires are not made according to standards, and therefore the proper balance of voltages and currents may not be maintained, resulting in best case scenario— The iPhone will take longer to charge and/or discharge faster; in the worst case, the power controller will fail, which will entail very expensive repairs. For the fifth iPhone, such a repair will cost, for example, $100, and this is not a situation where you can fix the device yourself.
However, we will not advise buying the original wire for 1590 rubles. You don’t have to pay a lot of money for the original, but buying a Chinese cable for 100 rubles for such an expensive gadget like an iPhone, risking its “health”, is simply ridiculous, you’ll agree. What do we recommend? Stick to the golden mean and purchase a certified cable - acceptable price and quality assurance.
Why won't my iPhone charge using the original cable?
And finally, let's look at another very interest Ask. Sometimes discouraged users ask, “Why did my iPhone refuse to charge from the original cable, displaying the message “This cable is not certified?” The answer is actually simple. Sometimes this happens if the cable is damaged or its contacts are clogged.
Lightning cables, which were first introduced with the iPhone 5, are especially prone to this problem. The charging cable for the 4S and earlier models still had a more reliable design. So if your iPhone 5 won't charge from original cable(or, in general, any other model), try cleaning it with a cotton swab and alcohol. If it doesn't help, you'll have to buy a new one. Luckily, you already know how to choose the right one.
Let's summarize
So, if the iPhone does not charge from the purchased non-original charging- this problem can be fixed. However, you need to understand that using a non-native cable can have dire consequences. On the other hand, buying an original wire is not very economical. Our solution - a certified cable with MFI marking - is not expensive and is guaranteed to be of high quality! By the way, do you understand that MFI cables are also counterfeited? So, of course, you should only buy them from reliable sellers!
