How to fix a broken iPhone charger cable? iPhone is dead - what to do and how to charge it without a power supply

Today it is impossible to imagine modern man without mobile phone. However, it is impossible to imagine electronic gadget without accompanying the full process of operation additional devices, the presence of which is a must. For example, a failed charger will certainly doom the “dependent” device to “energy death”. However, the question of how to charge an iPhone without charging, given the great popularity of the “yield” Apple brand, requires special coverage. Several of the most original technological innovations will be presented to your attention, allowing you to “pump up” Californian gadgets with the much-needed power of electricity for their batteries, of course, without the “participation” of the standard charger provided.

In search of promising technologies

First of all, the question requires some specification. After all, each of us knows that without the influence of a certain type of energy, none of the known inventions of “human genius” will be able to function. Therefore, the question of how to charge an iPhone without charging does not yet have a complete answer. Of course, some attempts by developers to change the principle of “life support” of the phone were successful. It goes without saying that the standard memory will undergo dramatic changes in the near future. The problem of “expedient universality” already has several fundamentally different solutions. However, today it is not yet possible to “globally decouple” mobile units from commonly used power outlets. However, how to charge an iPhone or other “brainchild” of the electronics industry when there is no access to the “benefits of civilization” is already a realistic reality. But the low efficiency (efficiency) of the developed and, by the way, mass-produced devices and at the same time the lack of thorough thought out of the feeding “mechanism” certain power charge is somewhat removed from being a full-fledged alternative to a 220 W source or other rating of the generally accepted standard for centralized electrification. As a result, we are seeing an ever-increasing need for and genuine interest from manufacturers... It is these facts that are pushing developers to find the most acceptable technological solutions.

Review of the most effective methods of “energy refueling” without using a standard power supply

Method No. 1

Perhaps we’ll start with the most basic, but not always available option power supply of a mobile device. Perhaps you don't know how to charge your iPhone from your computer. So let's take a look this method charging, which, as you understand, implies the use of a laptop, tablet or device equipped with If the operating level of the battery has become critical, and your device is “tired” of warning about it - the screen blinked and went out, you need to connect it to any available device, having the necessary port. Thanks to this, you will be able to answer the question of how to charge an iPhone without charging with a practical action.

Not demanding method No. 2

Today you can buy a charging case. That is, design feature Such a device will have a built-in battery, the capacity of which varies from 1500 to 3200 mAh. This allows you to use the phone for quite a long time without recharging. Convenient case not only ergonomic and aesthetically attractive. The in-demand device will help to effectively solve the problem of how to charge an iPhone without charging, and will also provide shockproof properties to the device. Moreover, protection from mechanical damage the back of the iPhone is guaranteed in any design of the charging case. The indicator on the front panel of the device shows the battery level, thanks to which the user can always visually determine the level of performance of the auxiliary battery.

Not quite an easy way #3

Of course, iQ technology - a definitely innovative option for wireless charging - helps to effectively “refill” the battery capacity without the difficult moment caused by connecting a 30-pin connector to the connector. The question of how to charge an iPhone without charging will no longer express unrealistic hopes. At the same time, the comfortable method greatly facilitates many operational tasks, and in particular, it is the most gentle way to restore the electrical potential of the battery. Since wear and damage to the contact pad of the iPhone is a natural inevitability due to intensive use of the phone, as a result of which the device often has to be recharged. Attractive module design that serves as an intermediary element between charging station and the battery of a mobile device, mounted on back gadget, and the installation process is not complicated and does not require special tools or installation skills. On the market, these are products that are presented in a variety of designs. The color, texture and material of the “intermediate device” are available to the user to suit almost any preference. The only disadvantage of such a memory can be considered the necessarily accompanying process of “upgrading” the device, which increases the “waist” of the smartphone by several millimeters. However, sometimes the question of how to charge an iPhone is resolved not only in this way...

Improved method No. 4

Today, the iQi Mobile project presents a slightly improved version of the new power standard. Despite the “freshness of the idea,” an ever-increasing trend of consumer demand is visible in the market for goods for mobile devices. The qualitatively modified charger, which has received wide recognition in user circles, allows for wireless “filling” of electricity into the phone’s battery. The main advantage of the new product is a critically reduced induction plate (receiver). The problem of how to charge an iPhone without charging and without “disfiguring” the design is becoming completely solvable. After all, the thickness of the additionally installed element is only 0.5-1.5 mm and is practically invisible under a thin layer of silicone frame. This fact iQi Mobile stands out from previously implemented wireless power standards. The connection condition can be considered important: a flexible connection to the Lightning port does not in any way complicate the user’s subsequent actions, primarily related to the use of the 30-pin Iphone port. Agree, this greatly simplifies many moments of mandatory access to the sometimes extremely necessary system connector of a mobile unit.

Several arguments in favor of wireless storage

No mechanical connection torque (direct contact).
Possibility of safe operation in unfavorable environments (moisture, dampness).
Ease of use (mostly).

A little about the disadvantages

Cost, size and weight are increasing.
Time parameter useful action electrical energy significantly exceeds standard option(taking into account the efficiency of the original memory).
It is not possible to use the phone while the battery is charging.

Summing up, or Energy prospects for iPhone

You know how to charge your device from a computer. But what do you do when you're camping or find yourself in a situation where there are no standard power sources available? Today there are devices on the market that can charge mobile devices using alternative methods receiving electricity. These are original technological solutions in the form of converting devices that convert mechanical, thermal, kinetic, magnetic and other types of energy into the voltage and current required by your device. Of course, there are many more disadvantages and shortcomings in the available devices than we would like. Price, weight, dimensions and other disadvantages hinder the path to achieving absolute perfection. But time is running and technology is developing...

The weakest link in iPhone already for many years the battery has been considered. Under average load, it can keep the device offline for no more than a day, after which the gadget will be completely discharged. You may not be familiar with this problem only if you use it to make 2-3 calls a day with an average duration of 3-4 minutes.

Of course, Apple's proprietary charger ensures that the battery returns to full capacity within 1 hour, but if you go on a long trip, finding an outlet in time is a real challenge.

To recharge the battery, you can use various sources energy: from computer USB ports to special cases. The choice depends on your preferences and available means.

How to charge iPhone without charging while on the road?

It is worth noting in advance that using a non-original charger or one not approved by the company Apple ways charging, you risk damaging your smartphone or even getting injured.

Charging iPhone via USB connector of computer or car radio

To do this, you will need a standard USB cable for your phone (30-pin for older models and Lightning for all models starting with iPhone 5). Using it, you can charge your smartphone from any computer, laptop or tablet that has a USB connector. You only need to connect the cable to your mobile phone and computer, after which charging will begin almost immediately. In addition, if your car has a car radio with a USB connector for connecting flash drives, you can use it to recharge the device.

How to charge an iPhone without charging using iQi Mobile?

iQi Mobile is small (thinner and smaller plastic card) external antenna, designed to receive electricity from a Qi wireless charger. It is attached from the outside back cover smartphone using adhesive tape, and then connect it to the Lightning connector. After this, the device is put on Silicone Case or an overlay that hides this “design”.

To start charging, just put your iPhone down rear panel to the surface special stand, supporting the Qi standard.

Charging an iPhone using an external battery

You can use any manufacturer if you purchase a universal external battery. It is equipped with a USB port for connecting charging cable and will allow you to “resurrect” your smartphone as quickly as possible. In addition, there are special cases for the iPhone with a built-in battery (such as the Juice Tank Helium). This accessory It is enough to put it on a smartphone so that it can extend the “life” of the device by almost 2 times.

The downside of most smartphones is that they run out of battery quickly. Unfortunately, Apple devices are no exception, so many users naturally have a question: how to charge an iPhone without charging. Is this possible in principle? Unlikely, but you can put in a little effort and significantly extend its battery life by using third party devices for charging.

We'll tell you how to make your gadget work longer and look at the process of repairing a broken one. charger for Apple phones.

Many smartphone owners are concerned about the problem that they quickly discharge

How to charge an iPhone without using a special device?

There are several ways:

You can make up for the lack of energy using a USB cable - just connect your device to your computer, laptop, tablet and any other energy source through it.

Charging via USB

Using an external battery or powerbank - such devices can recharge your iPhone several times to a maximum of one cycle of its own energy reserve. External batteries are also charged via the network and are an excellent option for those who need to frequently recharge their gadget. They take up little space and are produced by many manufacturers - be careful when choosing, do not save too much on them.

Cases with built-in batteries. If you don't like to carry separate device, as in the previous case, you can buy a case that can charge your iPhone. It also needs to be “filled” with energy first, and when you are on the road, the case can provide several days of operation for the gadget. Note that this result, of course, depends on the battery capacity of the device itself.

Case with built-in battery

And, of course, to many such a device will even seem the best way out, how external battery, since the case additionally performs another main function - it protects the device from damage and scratches.

Solar panels. They are somewhat reminiscent of a power bank, but they do not need to be charged using electricity. All you need to do is connect your phone to the battery, place it in a sunny place and wait a bit. This is very convenient, especially in summer and spring, when the days are longer and the sun shines stronger. In addition, this option the better that you do not need to pre-charge the battery - solar energy will be an excellent solution when you cannot connect to other sources.

Solar panels

Fire-powered devices. Yes, you can charge your battery using real fire. For this there are special blocks that convert heat into electrical energy. True, they are not as effective as other means, but in extreme cases they will save the phone from completely turning off.

Fire-powered devices

In the same way, there are wind generator devices that can restore charge using the wind. If there is no wind, you can compensate for it by running, or use the device while walking or cycling. True, for fully charged it will take 5–6 hours.

Wind generator

It is worth noting that in the future, chargers in the form of a power supply with a cable may disappear, because plates for wireless power supply will become more common. Why? This way you can better protect the charging connector, which quickly deteriorates due to constant use of the cable.

What to do if you don’t have all these funds?

In this case, use the following recommendations:

If you're near a shopping center, try looking for chargers in the rest areas or stores there. In addition, mobile operator centers should have network cables for most brands of phones by default.
You can go to service center and ask to charge the phone - even if they want money for the service, it will not cost much.
There are special charging terminals - they are installed in the same entertainment complexes and are also inexpensive.
When charging your iPhone, turn on airplane mode - with this method of operation, all communication modules that consume the most battery power are deactivated, and you will replenish your energy much faster.

How to fix iPhone charger?

If your iPhone charger is broken and you are confident in your abilities and capabilities, try to fix it yourself. To do this, do the following:

Trim the plastic shell on the end of the charger so as not to touch its insides. We are talking about the thicker end of the charger.
Cut the cable where it breaks.
Remove the protective winding to have access to the 3 thin wires, which should also be visible from the plug.
Remove the insulation from all wires, but so as not to damage the metal core.
Connect all the wires together by color and wrap them with electrical tape.
The electrical tape must be applied so that there are no bare wires left.
If desired, buy heat shrink and put it on the part of the wires that you repaired.

After all of the above, you will know how to charge an iPhone without the main device. We recommend that you definitely purchase one of the recharging devices to be able to always stay connected. And of course you can always try to fix it network device on your own - as you can see, there is nothing too complicated about it.

There is no ideal scheme, but still adhere to generally accepted rules and manufacturer’s recommendations.

iPhone is an expensive device that, as a rule, we buy for at least 2 years. At the same time, we have hopes that after the planned service life it will still work properly and we will be able to sell it for “good” money.

One of the first questions buyers ask is about the state of the device’s power supply, for example: “How long does the battery last?” So it makes sense to take care of correct operation iPhone batteries now.

As a power source in iPhones, iPads and others portable equipment, Apple company(other manufacturers too) uses lithium-ion batteries that:

Charges faster.
They work longer.
They have a high specific capacity.
Not subject to memory effect.

The battery memory effect refers to a reversible loss of capacity that occurs in some types of electric batteries when the recommended charging mode is violated, in particular, when recharging an incompletely discharged battery.

How iPhone owner and iPad with experience (since 2008), I declare with full responsibility that Apple uses high-quality power sources in its products.

1. Do not operate or charge the device in extreme temperatures (-40°C and +50°C).

Apple considers the ideal temperature range to be between 16 and 22°C and does not recommend "using your device in temperatures above 35°C as this may permanently reduce battery capacity." Overheating is critical!

From personal experience: I don’t look at the thermometer when I pick up my iPhone 5s, which I don’t advise you to do either. It is enough that:

The device has not been exposed to direct sunlight.
Do not leave it in the car in hot weather.
Do not charge under your pillow.

3. To charge your iPhone, use an original charger and at least a certified USB cable.

For example, if you increase the charge voltage of a lithium-ion battery by just 4%, it will lose capacity twice as fast from cycle to cycle. To prevent this, special PMIC controllers are built into the original network adapter and directly into the iPhone (in batteries this is the Battery Management System), which ensure that the conditions for recharging the device do not go beyond the permissible limits: temperature, current and voltage.

IN network adapters Without a clan and tribe, the so-called “nonames,” such a controller may not exist. Consequently, the voltage at the output of such an adapter may exceed valid values and can burn out the iPhone's power controller and then damage the battery.

From personal experience: Charge your iPhone using original chargers certified cable and forget about battery problems.

4. Do not completely discharge your iPhone (to 0%).

The lifespan of a lithium-ion battery is usually expressed in terms of the number of full discharge cycles when you use up 100% of the battery's capacity. For high-quality power supplies this is 400-600 cycles. Apple states that the resource iPhone battery is 500 cycles, and iPad, Apple Watch and MacBook - 1000 cycles.

Whenever you completely drain your device, its lifespan shortens. This is due to the depth of the discharge.

It turns out that the more you discharge lithium ion battery, the faster he “dies”. To increase battery life, avoid deep discharging.

For clarity, I will give the dependence of the number of battery discharge cycles on the depth of discharge.

Not many people know that Apple batteries are charged in 2 stages:

Up to 80% - in fast mode.
From 80 to 100% - compensation charging.

This charging system allows, firstly, to quickly charge the device, and, secondly, to extend its service life.

Remember full discharge lithium-ion battery will shorten its life and reduce its capacity.

From personal experience: Connect iPhone and iPad to a power source at 10-20% charge and disconnect after 80%.

5. Don't charge your iPhone to 100%.

Fully charging a lithium-ion battery is not as scary as deep discharge, but still undesirable. Of course, the controller will not allow your device’s battery to overheat and overcharge, but, as practice shows, always on connecting a 100% charged iPhone to the network reduces its time battery life.

From personal experience: Leave your iPhone charging overnight. For some time, a 100% charged device will be connected to the network, but nothing will happen to it - this is not enough storage time to worry about it. With this charge, your iPhone will last for more than two years.

It is difficult to control the chemical processes occurring in the battery. And since the dependence of the output voltage on the battery capacity is nonlinear and the lithium-ion battery is subject to natural aging, accompanied by a decrease in capacity, and also because we charge devices haphazardly, over time, the iPhone’s power controller cannot accurately determine the battery charge level. Diagnosis: iPhone turns off even when charged more than 1%.

In order to calibrate the controller and bring the charge level indicator to life, the iPhone needs to be completely discharged. Apple advises doing this no more than once a month.

Conclusion

In conclusion, I would like to note that each of us charges our devices in our own way. If there is ideal scheme, then it cannot satisfy everyone, since we live in different rhythms and in different conditions. Remember, your iPhone battery will age even if you do not use the device. Follow the rules described above (you don’t have to follow them strictly) and even if your iPhone battery fails, it can always be replaced.

The downside of most smartphones is that they run out of battery quickly. Unfortunately, Apple devices are no exception, so many users naturally have a question: how to charge an iPhone without charging. Is this possible in principle? Unlikely, but you can make a little effort and significantly extend its battery life by using third-party charging devices.

We'll tell you how to make your gadget work longer and look at the process of repairing a broken charger for Apple phones.

Many smartphone owners are concerned about the problem that they quickly discharge

How to charge an iPhone without using a special device?

There are several ways:

You can make up for the lack of energy using a USB cable - just connect your device to your computer, laptop, tablet and any other energy source through it.

Charging via USB

Using an external battery or powerbank - such devices can recharge your iPhone several times to a maximum of one cycle of its own energy reserve. External batteries are also charged via the network and are an excellent option for those who need to frequently recharge their gadget. They take up little space and are produced by many manufacturers - be careful when choosing, do not save too much on them.

Cases with built-in batteries. If you don't like carrying a separate device with you like in the previous case, you can buy a case that can charge your iPhone. It also needs to be “filled” with energy first, and when you are on the road, the case can provide several days of operation for the gadget. Note that this result, of course, depends on the battery capacity of the device itself.

Case with built-in battery

And, of course, many will find such a device an even better solution than an external battery, since the case additionally performs another main function - it protects the device from damage and scratches.

Solar panels. They are somewhat reminiscent of a power bank, but they do not need to be charged using electricity. All you need to do is connect your phone to the battery, place it in a sunny place and wait a bit. This is very convenient, especially in summer and spring, when the days are longer and the sun shines stronger. In addition, this option is better because you do not need to pre-charge the battery - solar energy will be an excellent solution when you cannot connect to other sources.

Solar panels

Fire-powered devices. Yes, you can charge your battery using real fire. For this, there are special blocks that convert heat into electrical energy. True, they are not as effective as other means, but in extreme cases they will save the phone from completely turning off.

Fire-powered devices

In the same way, there are wind generator devices that can restore charge using the wind. If there is no wind, you can compensate for it by running, or use the device while walking or cycling. True, it will take 5–6 hours to fully charge.

Wind generator

What to do if you don’t have all these funds?

In this case, use the following recommendations:

If you're near a shopping center, try looking for chargers in the rest areas or stores there. In addition, mobile operator centers should have default network cables for most brands of phones.
You can go to a service center and ask to charge your phone - even if they ask for money for the service, it will not cost much.
There are special charging terminals - they are installed in the same entertainment complexes and are also inexpensive.
When charging your iPhone, turn on airplane mode - with this method of operation, all communication modules that consume the most battery power are deactivated, and you will replenish your energy much faster.

How to fix iPhone charger?

If your iPhone charger is broken and you are confident in your abilities and capabilities, try to fix it yourself. To do this, do the following:

Trim the plastic shell on the end of the charger so as not to touch its insides. We are talking about the thicker end of the charger.
Cut the cable where it breaks.
Remove the protective winding to have access to the 3 thin wires, which should also be visible from the plug.
Remove the insulation from all wires, but so as not to damage the metal core.
Connect all the wires together by color and wrap them with electrical tape.
The electrical tape must be applied so that there are no bare wires left.
If desired, buy heat shrink and put it on the part of the wires that you repaired.

After all of the above, you will know how to charge an iPhone without the main device. We recommend that you definitely purchase one of the recharging devices to be able to always stay connected. And, of course, you can always try to fix the network device yourself - as you can see, there is nothing too difficult about it.

Surely every iPhone owner charges his gadget in a chaotic manner. Knowing that the device will last for about one day of light, we try to snatch precious energy here and there, at least for the same 20-30%. We are talking about random recharging at the workplace, with friends, in the car and other sources. And this is on the one hand, and on the other hand, we “fry” our devices, leaving them to recharge overnight, which in most cases exceeds the time mark of seven hours.

Let's try to figure it out and decide (iPhone 5S) your gadget and how negatively the above-described intermittent connections will affect the life of the battery as a whole. The opinions of experts in this field and reviews of ordinary owners of these gadgets will be taken into account.

In general, the average user does not ask himself any serious questions regarding charging the device - he plugged the gadget into the outlet and forgot. However, there are some interesting and important points that few people know about. These nuances, coupled with general recommendations will just help answer the question: “How to properly charge an iPhone 5S?”

We will systematize and pay attention to all the practical and critical points from the standard operating instructions for the gadget, which, one way or another, relate to our topic.

How to properly charge your new iPhone 5S

The first charge of your gadget is one of the most important moments. In order for the device to serve properly for many years and make you happy for a long time autonomous operation, it is necessary to correctly carry out the first recharging cycle.

How to properly charge iPhone 5S for the first time:

as soon as you take your gadget out of the box, connect it to the charger for at least three hours;
If the battery indicator is 100% full, you can safely use the device until complete discharge battery;
after the device turns off, leave the iPhone alone for about two to three hours;
After the specified time has passed, reconnect the phone to the charger and again wait until it is charged to 100%.

It is also worth noting one important nuance in the question: “How to properly charge an iPhone 5S for the first time?” During the first charging cycle, you should never use the gadget, otherwise new battery will begin to “sag” and lose, albeit very small, but such an important amount of battery. Also, before charging properly new iPhone 5S, that is, according to the instructions described above, make sure that the charging place excludes any sources of moisture (bathrooms, vases with water, aquariums, etc.) and direct sunlight. That is, in fact, everything that can negatively affect the first cycle.

Should I charge at night or not?

In order to really understand how to properly charge an iPhone 5S and whether to leave it overnight, you need to clearly understand what exactly happens to our gadget after connecting to the charger.

It’s worth noting right away that, as in most other similar cases, the charging controller, or in other words, the power management module, is responsible for the process of powering the device. This controller is directly connected to the battery capacity indication, that is, it does not allow the gadget to be recharged and at the same time tries to quickly fill the volume to 100% in a reasonable time. It should also be noted that the first 80% of the battery capacity is filled quite quickly, and the next 20% is in a gentle mode, that is, noticeably slower.

Once the battery is fully charged, the power management module turns off power without taking or transferring charge to the battery. The gadget itself will work at this time from the network, that is, in in this case The battery neither charges nor discharges. Keep this point in mind before properly charging your iPhone 5S.

Features of long-term charging

Many become hostage to the myth that after reaching 100% of the indication, it begins to work cyclically, discharging and recharging. In fact, this is not the case, otherwise it would lead to significant wear and tear on the battery, which neither the manufacturer nor, of course, the user was happy with.

Next is another fact on the question of how to properly charge an iPhone 5S. Surely every owner mobile gadget knows that any battery is subject to self-discharge. And this is quite normal, unless, of course, it is connected to the charger at this time. U lithium polymer batteries, with which fifth iPhones are equipped, this figure fluctuates around 5% per month, which is extremely low when compared with other types and types of batteries.

Charging cycle

The power management module periodically checks the remaining battery capacity, and if it encounters a significant loss of charge, it begins new cycle energy supply. This need arises after the loss of at least 2% of the charge, and this does not happen more than once every two weeks. That is, if you forget your gadget connected to the network for a whole month, the controller will start recharging the battery once or maximum twice.

Taking into account all of the above, we can safely conclude how to properly charge the iPhone 5S, and that leaving the gadget connected to the network all night will not risk anything and will not cause any damage. battery.

Power adapters

A standard charger (5V, 1A, 5W) will fully charge your gadget in about an hour and a half. There is nothing to add about branded “Apple” adapters - they are made with high quality, conscientiously and extremely rarely break.

Some people ask a very interesting and quite logical question: “Is it possible to charge your iPhone 5S using an iPad charger?” Yes, you can. Some particularly zealous admirers and commentators on specialized forums immediately counter that this is extremely harmful to the phone’s battery for one reason or another, but let’s sort it out in order.

Firstly, on the official (!) Apple resource There is a corresponding topic where it is stated in black and white: “Even though the charger is designed for an iPad, you can also charge any model of iPhone or iPod with it.” And such a point in the text is clearly not present in order to make money from users by selling them new batteries.

Myths

Yes, there are more than enough myths that you can’t charge your iPhones with adapters from iPads. This procedure allegedly completely kills phone batteries, significantly reducing battery capacity. Experts in this field (whom you should listen to) unanimously assure that this is not so.

Remember that the charger, as we used to call it, with which we power the phone, is not a charger at all, no matter how punish it may sound. This is the most common power adapter direct current. The phone charging module is located in the gadget itself and is the same power controller mentioned above. It is this module that determines exactly how much current to send to the battery.

Chinese power adapters

It’s not worth considering from the Middle Kingdom. Almost all experts unanimously advise against using Chinese adapters food due to their dubious quality. They are the ones that can completely ruin your battery.

Literally all field tests showed that real characteristics Chinese chargers differ significantly from those declared. Of course, due to the cheapness of these adapters, the temptation to buy is very great, but you will remember these couple of paragraphs more than once when your iPhone stops charging, so it’s better not to risk it and stick to branded “Apple” chargers.

Car adapters

In general, all car chargers are bad for your gadget. They can only be used in the most extreme cases, because the risk of completely destroying your battery is very high.

The thing is that the automotive power system is far from being a standard for the stability of current and voltage, and those chargers that we see on the shelves of car stores are simply not able to protect your iPhone from electrical surges. Car adapters can easily damage your phone's power management module, which best case scenario will affect the charging time, and at worst - a complete failure in the energy supply of the gadget even with a proprietary charger from standard network at 220 V.

Many of us have found ourselves in situations where the iPhone is about to run out of power in the middle of the day, the smartphone shows only 10% charge and flashes ominously red, and there is no charger at hand. And at the same time, we are in the city center, there are no friends nearby who would borrow a charger. What can be done in this case? We offer five useful tips.

There is no point in giving such obvious advice as always carrying a charger or a portable charger that does not require an outlet. Moreover, in megacities, every second smartphone owner always has a charger with him. But it also happens that we can simply forget to take this vital thing with us, accidentally leaving it in another bag or on the nightstand. Therefore, let’s try to decide what to do if you have neither a charger nor a portable charger in your arsenal.

1. If you are in or near a shopping mall, find a store that has charging lockers. Usually in some stores well-known networks There are small cabinets with chargers for various connectors. And while you are trying on clothes, your phone will charge.

A similar service is available, for example, in the Moscow bookstore on Tverskaya Street. Ask the information department to charge your phone - they are unlikely to refuse you.

2. Another simple way is to go to any salon cellular communications and ask to recharge your phone. The likelihood that you will be rejected is very low. But in such cases, it is best to contact the salon of one of the operators - in some such services are taken for granted. In addition, cell phone stores have chargers for all models. You can also go to an electronics store with the same request.

Whether this service will be paid depends on the seller. However, if you have to pay, it won’t be much – 50-100 rubles maximum.

3. There are special terminals for charging phones. Unfortunately, there are not as many of them as ATMs and payment terminals. They are usually found in large shopping centers, in cafes, waiting rooms at train stations and airports. There are several wires in the terminal cells that are suitable for all models. This pleasure costs about 50 rubles per hour.

4. Smartphones are known for draining battery faster regular phones. This happens by various reasons. We want to tell you about a few more life hacks that will speed up the charging process and save energy on your smartphones.

If you have very little time to recharge, then turn on Airplane mode on yours - and charging will go much faster. You can also simply turn off the phone while charging. The smartphone will not consume energy, but will receive it much faster.

5. If you don't have the option to turn off your phone or activate Airplane mode because, say, you don't want to miss an important call, then try turning off unnecessary functions. This could be GPS, Bluetooth, LTE. All these functions take up some of the energy. By turning them off, you can speed up the charging process a little. When using your smartphone, keep these functions turned off unless you are directly using them. This will make your smartphone discharge slower. There is also a classic helpful advice To save energy, reduce the screen brightness and screen auto-off time in the settings.