Megafon sp al firmware unlocking. MegaFon Login SP-AI software update
For free!Remember - you do all actions at your own peril and risk!
WE ARE NOT RESPONSIBLE FOR CRUGGED HANDS!!!
How to unlock your MegaFon phone login sp-a1 for free from your operator
1. To unlock from an operator, we can ONLY use a computer with installed windows system XP/Windows 7 32 bit
3. In the C:\login\ folder, run vcredist_x86.exe and install Microsoft Visual C++
4. In the folder C:\login\ run Name
5. A window will appear in which you need to enter the IMEI of your megafon sp-a1 phone (imei is written under the battery - or dial *#06#)
6. Press - ENTER
7. Turn off the phone, remove the battery for 5 seconds, connect the phone to computer USB cable and insert the battery back.
8. An unknown device will appear in Device Manager (with exclamation mark) - install the driver for it from the folder C:\login\drv
9. If the installation was successful, a new COM port will appear in the Device Manager - look and remember its value.
10. Disconnect the phone from the computer and remove the battery.
11. Launch: C\login\flashtool\FlashTool.exe
12. Go to the menu item as shown in the photo (there is only one)
13. In diag1, select the COM port number of our phone, which we remembered above.
14. Click - OK, click on the button on the left, ?? , - the program will write, -Ready-, ,
15. Again, connect the phone to the computer and then insert the battery into it - the firmware will be installed into the phone - Port1 lights up green.
16. Upon completion MegaFon firmware ligin SP-A1 - remove the battery and close the firmware program. We turn on the phone.
17. Sometimes the phone asks you to enter the unlock code - enter 191519373892 (if asked)
18. Install the latest official firmware from the Megafon website, according to these instructions
19. On off SP-AI phone press the sound button up (VOL+) and then power up- hold down until the device turns on in the Recovery menu
20. Using the sound buttons, move to the Wipe data\factory reset item and activate it with the power button. Move to Yes - delete all user data
Use the power button to select it. After the operation is completed, select - Reboot system now
21. That’s all - this is how you can unlock megafon ligin sp-a1.
ICQ - 609843478
MAIL(agent) - [email protected]
Yandex- [email protected]
QIP- [email protected]
Yahoo - Razlo4ka
Seems, Russian operators cellular communications finally turned their attention to the fact that it is more profitable to sell service than hardware. Yes, this is a common practice in the United States when, when concluding a contract for cellular communication services, the subscriber receives a phone for an essentially symbolic price.
The Big Three launched almost identical Android smartphones priced below $100, manufactured in China. This MTS 960(2990 rub.), Beeline E600(2990 rub.) and MegaFon Login
(2560 rub.)
I have the last one in my hands - MegaFon Login on Android 4.0.4.
In addition to the phone itself, for these 2,560 rubles, the subscriber receives three months of work on the Internet at the “Internet XS” tariff. That is, in fact, the phone itself will cost 1990 rubles. Without a contract, the price of the smartphone is 2990 rubles.
The characteristics of the device are as follows:
- Support GSM, 3G, GPRS, EDGE, Bluetooth, Wi-Fi, GPS, A-GPS, GLONASS
- Processor Broadcom BCM21654, 1 GHz
- RAM 512 MB
- Internal memory 4 GB
- VideoCore IV HW video accelerator
- Capacitive screen 320×480, 3.5", multi-touch for 2 touches
- Li-ion battery, 1300 mAh
- Camera 3 megapixels, with flash
- Support microSD cards up to 32 GB
- FM radio with RDS
- MicroUSB and 3.5 mm headphone connectors
- Dimensions 63 × 115.8 × 13 mm, weight 118 g.
I was wondering what needed to be done with the gadget to make it 4 times cheaper without changing the characteristics, and does it make sense to buy it at that price? Looking ahead, I will say that I liked this toy. Login is definitely worth the price, and Android helps a lot with that.
The configuration of a smartphone is traditionally simple and predictable. This is a rechargeable battery and a USB cord with charger. In addition to them, the miniature box contained a manual and a wired headset (does anyone print them out at all?).
The charger produces 0.5 A, which seems to be not much these days. The battery is also small - 1300 mAh. However, the current consumption in this smartphone is low - the battery is enough for a couple of days of active use.
In numbers, this is about 9 hours of talk time, 8 hours of watching movies or 125 hours of standby time.
MegaFon Login looks quite modern stylish smartphone. The size was chosen very well - it fits into a shirt pocket, and does not get in the way or break in jeans. Feels comfortable in the hand (back panel- with SoftTouch coating). For example, it has a similar size Nokia Asha 200 (pictured).
I must say that I took the phone a week ago, and all week I mercilessly used it physically extreme modes. I was not able to damage it in any way - it was assembled very reliably, and itself is quite durable.
I have only one complaint about the assembly. (there was a similar one for SP-W1, by the way): The microUSB connector is not protected in any way. And I'm pretty sure I could put the wire in there the wrong way and break something there.
Apart from the microUSB, there is nothing else on the left side of the phone. On the top there is a headphone jack and an on/off button. On the right is a volume rocker, at the bottom is a microphone and a hardware “Home” button. It’s not really needed, but it’s more convenient to turn on the smartphone screen than the button on the top edge.
On the back of the device there is a camera (3 megapixels) with LED flash. The camera does not have autofocus, which significantly affects the quality of the pictures. It can record quite decent video at 640×480 resolution. The flash can be used as a flashlight, and this is its best use.
It is quite possible to photograph text with such a camera; it will be legible in the photograph.
The external speaker of the phone is normal, the melodies play loud enough. The sound in headphones is better if you get normal headphones, of course.
The MegaFon Login screen is definitely not the best strong place. The manufacturer saved money on this. Not too much high brightness, small viewing angles, low sensitivity and accuracy. You need to get used to it (in a week I learned to type text almost without missing a beat), and for those who are annoyed by such things, this smartphone is contraindicated.
The problem with typing can be partially solved by installing alternative on-screen keyboards and display calibration.
The strength of a smartphone is geolocation. There is also a very fast GPS, A-GPS, and even GLONASS, which is for devices in this price range- generally very rare. And it all works.
Being connected to on-board network car, MegaFon Login turns into a navigator. All popular ones can be installed on it without problems and work perfectly. navigation systems and cards. As far as I understand, in preinstalled program“Navigation” MegaFon doesn’t even charge money for traffic.
Like SP-W1, Login only works with MegaFon SIM cards. You can also buy “untethered”, but it’s a little more expensive and made to order (you’ll have to wait).
It keeps a good connection, both in Wi-Fi networks, and in 3G, and in areas with poor coverage.
According to the manual, the 3G module operates in the HSDPA 7.2 Mbit/s download format, HSUPA 5.76 Mbit/s upload. The possibility of such speeds depends on the number base stations nearby. I was unable to record a download speed of more than 4 Mbps - the smartphone works with 3G at the same speed as iPad first generations. I think in large cities the speed should be higher.
You can choose which network to use - 2G or 3G. There are Bluetooth modem functions and Wi-Fi router, which significantly expands the possibilities of using the device.
The software of the smartphone has not undergone any special changes - in addition to the Android 4.0.4 ICS OS itself, a set of programs from Mail.ru, “Navigator” and “Replace the beep” from MegaFon, as well as a certain sports application “Championat.com” were found in the smartphone.
Almost all the programs that I tried to run on this smartphone worked without any problems. The exceptions are Skype and Chrome - official applications from Play Market do not work, you need to install other versions (available on the Internet). Only Instagram does not work at all - a patch has not yet been released.
The games work, all kinds of racing simulators and shooting games (Dead Trigger, for example) work flawlessly, not to mention all kinds of Angry Birds.
No obvious glitches or freezes were noticed - the device works quickly, clearly and predictably. In my opinion, this is what saves the smartphone - it runs Android and the vast majority of applications from the Play Market completely honestly.
And behind some of the complexity of Android from the point of view of beginners are its ample opportunities. Completely banal tasks like “download a movie to your phone and watch it” or “take a picture and send it by e-mail” are solved on such a device extremely simply and in a matter of seconds.
I think the children will also be delighted with similar phones(games, applications, appearance), and the parents’ wallet will suffer less if the child loses or breaks the phone.
Update instructions software MegaFon Login phone (model SP-AI) from internal memory phone.
Before starting the update, make sure your phone battery is fully charged and in good working order.
System updates may delete personal data from your device's memory. It is recommended to create backup copy personal data before updating the system.
We connect the turned on MegaFon Login phone to the computer using a data cable
On your phone, click “Enable USB storage” and confirm the action by clicking “OK”.
Download the official firmware update for Megafon Login - link.
Save the file to your phone, renaming the file to “Update.zip”
After saving the file, turn off the phone.
Press and hold the Volume Up key and the Power key at the same time for about 10 seconds. After the appearance standard screensaver and a vibration signal, the phone will boot into recovery mode.
Use the volume keys to select apply update from external storage.
Confirm your selection by briefly pressing the Power key. A file manager will open with the contents of the memory card.
Use the volume buttons to select a file update.zip.
Confirm your selection by briefly pressing the Power key. During the update process, the message will appear Install /sdcard, then - diagnostic messages.
Attention: don't turn off your phone or take pictures battery before the inscription appears Install from sdcard complete. The software update process usually takes about a minute.
Select an item wipe data/factory reset volume keys
When a new menu appears, select the item Yes – delete all user data. Confirm your selection by briefly pressing the Power key.
The process of formatting and clearing the internal memory will begin, after which the recovery menu will open again.
Use the volume keys to select the item reboot system now. Confirm your selection by briefly pressing the Power key.
After rebooting, the phone is ready to use.
Most owners of trendy smartphones, tablets or Megafon smartphone V9 model on operating system Android 2.3 with a capacitive touch screen 16.7 million colors - 600x1024 dpi They believe that it is impossible to change the firmware in these gadgets yourself, but they are deeply mistaken.
Reasons why you need to flash a tablet, Megafon smartphone model V9 in the operating room Android system 2.3 with capacitive touch screen 16.7 million colors - 600x1024 dpi, very diverse: when the device completely refuses to turn on, if it spontaneously starts to reboot, you need to restore the software after unsuccessful installation or just wanted to install the most new version firmware.
Firmware Flashing of smartphones Megafon Login, optima, sp a1 and other models.
- You can do the firmware yourself on all phones, tablets, smartphones Megafon model V9 on the Android 2.3 operating system with a capacitive touch screen 16.7 million colors - 600x1024 dpi.In addition to the topic of firmware on Android smartphones, there is a review article: . It describes in detail, there is a video instruction on how to reflash mobile device on Android kit kat.
In what cases should you update the firmware of smartphones, tablets, Megafon smartphone model V9 on the Android 2.3 operating system with a capacitive touch screen 16.7 million colors - 600x1024 dpi and for other models:
If the phone does not turn on, although the reason may not be in the firmware;
If the phone constantly glitches and reboots;
If done unsuccessful firmware and the phone must be returned to its original state;
If you need to install the next, most modern version firmware;
Download firmwares, programs, flashers and Megafon firmware.
Download free firmware for your Megafon phone from your computer.
- official website of the manufacturer cell phones Megafon, for following models optima, sp a1, 4G Turbo and others. By clicking on the link, you can enter the name and model code into the search and download software and firmware, for example for Megafon optima, sp a1, 4G Turbo, where you can also download RU, RP, software and driver for free on your mobile device.The search for software, first of all, should always be carried out on the official website of the electronics manufacturer; there are always the most current and latest firmwares for the Megafon 4G Turbo phone with a capacitive IPS dpi screen and other models with other characteristics.
Megafon firmware instructions.
How to properly flash a smartphone. Instructions for firmware using the example of a Megafon sp a1, 4G Turbo phone.
On your smartphone, go to Settings->Developer options and enable USB debugging.
We connect the USB cable from the phone to the computer and install the firmware.
Disconnect the phone from the computer, turn it off and remove the battery.
Launch the SP program on the computer Flash Tool, it is needed to upload new firmware to the phone.
In the program window, click the Scatter-loading button and in the window that opens, select the file MT6589_Android_scatter_emmc.txt (you can find it in the folder with other files of the new firmware). After opening, the program will contain all the paths to the files necessary for the update.
Be sure to uncheck the first item - PRELOADER (otherwise the phone will not boot).
Now click the Download button. We answer “Yes” to any pop-up messages.
We connect the smartphone (with via USB cable) to the computer, new firmware will start pouring into our device automatically.
When the process is complete, a window with a green circle will appear. You can disconnect your phone from your PC and turn it on.
For more information on how to do this, see the video instructions:
To search for firmware on the Internet, you need to know the model of your phone that you will be flashing. You can quickly find out your phone model and firmware version by typing the code in your phone *#0000# .
Instructions for flashing Megafon sp a1, 4G Turbo
One more example. Firmware instructions mobile phone Megafon sp a1, 4G Turbo.
Firmware for Megafon sp a1, 4G Turbo: download firmware for
Firmware Megafon sp a1, 4G Turbo
