Firmware sp ai. MegaFon Login (SP-A1): well, very budget Android

Update instructions software phone MegaFon Login(model SP-AI) from internal memory phone.

Before starting the update, make sure your phone battery is fully charged and in good working order.

System updates may delete personal data from your device's memory. It is recommended to create backup copy personal data before updating the system.

We connect the turned on MegaFon Login phone to the computer using a data cable

On your phone, click “Enable USB storage” and confirm the action by clicking “OK”.

Download official firmware updates for Megafon Login - link.

Save the file to your phone, renaming the file to “Update.zip”

After saving the file, turn off the phone.

Press and hold the Volume Up key and the Power key at the same time for about 10 seconds. After the appearance standard screensaver and a vibration signal, the phone will boot into recovery mode.

Use the volume keys to select apply update from external storage.

Confirm your selection by briefly pressing the Power key. A file manager will open with the contents of the memory card.

Use the volume buttons to select a file update.zip.

Confirm your selection by briefly pressing the Power key. During the update process, the message will appear Install /sdcard, then - diagnostic messages.

Attention: don't turn off your phone or take pictures battery before the inscription appears Install from sdcard complete. The software update process usually takes about a minute.

Select an item wipe data/factory reset volume keys

When a new menu appears, select the item Yes – delete all user data . Confirm your selection by briefly pressing the Power key.

The process of formatting and clearing the internal memory will begin, after which the recovery menu will open again.

Use the volume keys to select the item reboot system now. Confirm your selection by briefly pressing the Power key.

After rebooting, the phone is ready to use.

For free!

Remember - you do all actions at your own peril and risk!
WE ARE NOT RESPONSIBLE FOR CRUGGED HANDS!!!

How to unlock your MegaFon phone login sp-a1 for free from your operator

1. To unlock from an operator, we can ONLY use a computer with installed windows system XP/Windows 7 32 bit

3. In the C:\login\ folder, run vcredist_x86.exe and install Microsoft Visual C++

4. In the folder C:\login\ run Name


5. A window will appear in which you need to enter the IMEI of your megafon sp-a1 phone (imei is written under the battery - or dial *#06#)


6. Press - ENTER

7. Turn off the phone, remove the battery for 5 seconds, connect the phone to computer USB cable and insert the battery back.

8. An unknown device will appear in Device Manager (with exclamation point) - install the driver for it from the folder C:\login\drv

9. If the installation was successful, a new COM port will appear in the Device Manager - look and remember its value.

10. Disconnect the phone from the computer and remove the battery.

11. Launch: C\login\flashtool\FlashTool.exe

12. Go to the menu item as shown in the photo (there is only one)


13. In diag1, select the COM port number of our phone, which we remembered above.


14. Click - OK, click on the button on the left, ?? , - the program will write, -Ready-, ,

15. Again, connect the phone to the computer and then insert the battery into it - the firmware will be installed into the phone - Port1 lights up green.

16. Upon completion MegaFon firmware ligin SP-A1 - remove the battery and close the firmware program. We turn on the phone.

17. Sometimes the phone asks you to enter the unlock code - enter 191519373892 (if asked)

18. Install the latest official firmware from the Megafon website, according to these instructions

19. On off SP-AI phone press the sound button up (VOL+) and then power up- hold down until the device turns on in the Recovery menu

20. Using the sound buttons, move to the Wipe data\factory reset item and activate it with the power button. Move to Yes - delete all user data

Use the power button to select it. After the operation is completed, select - Reboot system now

21. That’s all - this is how you can unlock megafon ligin sp-a1.

ICQ - 609843478

MAIL(agent) - [email protected]
Yandex- [email protected]
QIP- [email protected]
Yahoo - Razlo4ka

Most owners of trendy smartphones, tablets or Megafon smartphone model V9 in the operating room Android system 2.3 with a capacitive touch screen 16.7 million colors - 600x1024 dpi They believe that it is impossible to change the firmware in these gadgets yourself, but they are deeply mistaken.

Reasons why you need to flash a tablet, Megafon smartphone model V9 on operating system Android 2.3 with capacitive touch screen 16.7 million colors - 600x1024 dpi, very diverse: when the device completely refuses to turn on, if it spontaneously starts to reboot, you need to restore the software after unsuccessful installation or just wanted to install the most new version firmware.

Firmware Flashing of smartphones Megafon Login, optima, sp a1 and other models.

- You can do the firmware yourself on all phones, tablets, smartphones Megafon model V9 on the Android 2.3 operating system with a capacitive touch screen 16.7 million colors - 600x1024 dpi.

In addition to the topic of firmware on Android smartphones, there is a review article: . It describes in detail, there is a video instruction on how to reflash mobile device on Android kit kat.

In what cases should you update the firmware of smartphones, tablets, Megafon smartphone model V9 on the Android 2.3 operating system with a capacitive touch screen 16.7 million colors - 600x1024 dpi and for other models:

If the phone does not turn on, although the reason may not be in the firmware;

If the phone constantly glitches and reboots;

If done unsuccessful firmware and the phone must be returned to its original state;

If you need to install the next, most modern version firmware;

Download firmwares, programs, flashers and Megafon firmware.

Download free firmware for your Megafon phone from your computer.

- official website of the manufacturer cell phones Megafon, for following models optima, sp a1, 4G Turbo and others. By clicking on the link, you can enter the name and model code into the search and download software and firmware, for example for Megafon optima, sp a1, 4G Turbo, where you can also download RU, RP, software and driver for free on your mobile device.

The search for software, first of all, should always be carried out on the official website of the electronics manufacturer; there are always the most current and latest firmwares for the Megafon 4G Turbo phone with a capacitive IPS dpi screen and other models with other characteristics.

Megafon firmware instructions.

How to properly flash a smartphone. Instructions for firmware using the example of a Megafon sp a1, 4G Turbo phone.

On your smartphone, go to Settings->Developer options and enable USB debugging.

We connect the USB cable from the phone to the computer and install the firmware.

Disconnect the phone from the computer, turn it off and remove the battery.

Launch the SP program on the computer Flash Tool, it is needed to upload new firmware to the phone.

In the program window, click the Scatter-loading button and in the window that opens, select the file MT6589_Android_scatter_emmc.txt (you can find it in the folder with other files of the new firmware). After opening, the program will contain all the paths to the files necessary for the update.

Be sure to uncheck the first item - PRELOADER (otherwise the phone will not boot).

Now click the Download button. We answer “Yes” to any pop-up messages.

We connect the smartphone (with via USB cable) to the computer, new firmware will begin to be uploaded to our device automatically.

When the process is complete, a window with a green circle will appear. You can disconnect your phone from your PC and turn it on.

For more information on how to do this, see the video instructions:

To search for firmware on the Internet, you need to know the model of your phone that you will be flashing. You can quickly find out your phone model and firmware version by typing the code in your phone *#0000# .

Instructions for flashing Megafon sp a1, 4G Turbo

One more example. Firmware instructions mobile phone Megafon sp a1, 4G Turbo.

Firmware for Megafon sp a1, 4G Turbo: download firmware for

Firmware Megafon sp a1, 4G Turbo