How to remove the startup screensaver on Windows 7. Changing and disabling the screen saver in Windows. Screensaver settings using standard tools

At the dawn of the computer era, all progressive humanity used monitors equipped with cathode-ray picture tubes. The disadvantages of such picture tubes included burnout of the phosphor when a static picture was displayed on the screen for a long time, which led to a rapid decrease in the quality of the output video image and even failure of the picture tube.

To prevent this situation from occurring, developers have included support for screen savers in the Windows operating system, which are simple dynamically changing pictures. Modern monitors and screens are created using completely different technologies, free from the shortcomings of their predecessors, so you don’t really need to use screen savers.

Be that as it may, no one forbids you to enjoy the animation played on the screen when the computer goes into sleep mode. Windows 10 comes with several screen savers by default. To assign one of them, follow these steps:

1. Click the data search icon (or field) located on the taskbar next to the Start button. Enter the keyword Screensaver and press the key . In the search results pane, find Turn your screen saver on or off and click it. The Screen Saver Settings dialog box appears on your screen.

2. Click the Screen Saver drop-down button and select your favorite screen saver. After selecting your screen saver, click the Preview button to see its effect on the preview thumbnail. Review all available options in the dialog box before making your final decision.

Try using the Options button and changing the settings of the tested screen savers. Please note that sometimes changing screen saver settings (for example, slide playback speed) results in an effect that is completely different from the original.

3. If necessary, provide the screensaver with a secure login feature when the computer wakes from sleep mode by selecting the Start at login screen check box. This setting will prevent other users from gaining access to your computer during your short-term absence from your workplace. When you exit screen saver mode, Windows 10 will ask you to enter your account password.

4. Once you have completed setting all the operating parameters for the screen saver, click OK. The changes made are saved and take effect.

If you want to extend the life of your monitor (and save electricity), then ditch screen savers. Instead, manually put your computer into sleep mode, even if you leave your desk for a short time. To do this, right-click the Start button, select Shut down or sign out, and then click Hibernate from the drop-down menu. To “wake up” the computer, just press any key on the keyboard.

A screensaver, or screen saver, is an animation that starts playing on a computer screen when the user does not perform any actions using an input device such as a keyboard, mouse, or touchpad for a period of time. In the past, screensavers were needed to protect monitors from burn-in, but today they are used to customize the appearance of the operating system or for security.

Instructions

To change or disable the screen saver in Windows 7, open Control Panel. Select Personalization there. To do this, you can also simply right-click on the desktop, the Personalization item will be in the menu. At the bottom, you will see several icons, including Desktop Background, Sounds, Window Color. The one on the far right is the Screensaver icon. Click on it, a window for setting up the screensaver will open.

If your version of Windows 7 does not provide personalization, then in the Control Panel, in the search bar at the top right, type “screen saver”. You will see a list of items, by opening which you can disable the screensaver.

To disable it, select the line (No) in the list of screensavers, then click OK. The screensaver will no longer bother you.

If you have the Windows Vista operating system installed, the sequence of actions is slightly different. Click Start -> Control Panel -> Appearance and Personalization -> Personalization -> Screen Saver. In the same way, select (No) from the list and click OK.

Windows XP owners can configure their computer as follows. Right-click on the desktop and select Properties. A window will open containing several tabs, including the Screensaver. Similarly, select (No) and press OK to turn off the screensaver.

Video on the topic

Helpful advice

Using a screensaver forces anyone who wants to use the computer to enter a password to log in. This greatly improves security, especially if someone other than you has physical access to it. Even if you don't like screensavers, you can still set your computer to lock after some time of inactivity. To do this, enable the "Start at login screen" checkbox, set the number of minutes after which the operating system will lock your PC, and then click OK.

Sources:

Setting up your screensaver
how to remove windows 7 screensaver

If you do not press the keyboard keys or use the mouse for a long time, then the computer thinks that the user is not working and has gone about his business. In this case, the preset picture turns on, after which the PC may turn off completely. This problem occurs very often when watching movies. Your computer's operating system is initially configured this way. But there are options for reconfiguring it. All settings are available, you just need to know which keys to press. In our article we will look at methods on how to remove the screensaver from the Desktop.

How to remove a screensaver in Windows XP?

Despite the fact that Microsoft has stopped supporting the Windows XP operating system, people still use it. It is usually installed on weak computers, since more modern versions of the OS can lead to severe slowdown and glitching of the device. This is why the Windows XP operating system is still in active use.

Let's look at how to remove the screen saver from the desktop of a computer or laptop using Windows XP:

Open the Start menu.
In the dialog box that opens, look for the “Settings” item and click on it.
Go to the “Control Panel”.
In the list that opens we find “Screen”.
Click on the selected item and press the “Enter” key.
Go to the desktop context menu and right-click on a random location on the screen.
A list appears, where we click on “Properties”.
In the “Display Properties” tab that appears, look for the “Screen Saver” tab and click on it.
Below the preview window there is a selection line where the name of the image that is currently active is displayed. Left-click on this line.
From the drop-down list, click on the line “No”.
Click on the “Apply” button.

From now on, the annoying screensaver is turned off.

How to remove a screensaver in Windows 7, Vista?

Today, most computers are running the Windows 7 operating system. And this is not surprising, since it functions perfectly even on not very powerful computers. There are several ways here. Let's look at them in more detail.

Method No. 1

To remove the screen saver from the screen of a computer or laptop with Windows 7, Vista:

Move the cursor to an arbitrary place on the Desktop and right-click.
In the window that opens, click on the “Personalization” subsection.
Find and click on the “Screensaver” icon.
Next, click on “Screen saver settings”.
In the list that appears on the screen, consisting of the names of the pictures, click on the word “No”.

Method No. 2

There is another way to delete a useless picture on a computer device. Let's look at how to carry out this process:

Right-click on any location on the desktop.
In the window that opens, click on “Personalization”.
In the lower corner, which is on the right side, find and click on the “Screensaver” item.
A list opens in a new window, scroll through it and find the recently installed picture.
Having made sure that the screensaver is present, we proceed to remove it.
Open the Start menu.
In the window that opens, find and click on the “Control Panel” subsection.
In the insert that appears, click on the “Programs and Features” section.
In the drop-down list we find our screensaver and select it with the mouse button.
Click on the word “Delete”.

As a result of these actions, the screensaver on the desktop of your computer or laptop is turned off.

How to remove a screensaver on Windows 8, 8.1?

Windows 8, as well as its updated version 8.1, has some special features. When the PC is idle for a long time, the operating system screen lock is activated. In this case, to resume work, the user has to re-enter the set password for his account in order to again gain access to the OS and the ability to further use it.

Important! The developers launched the Windows 8 lock screen for security purposes. If the owner of the PC is absent from his workplace for a long time, then other users are not able to log in to the system, since to do this they need to use the computer administrator account credentials.

For many cases, this order is not very convenient, and it is not always necessary. For example, a computer is installed for home use and only one user works on it. If the PC is in turned on mode and the user is temporarily absent, then it will be inconvenient to enter a new password each time.

There is no way to directly disable the lock screen, since the user settings do not have such a function. To disable the lock screen, you must use the Local Group Policy Editor.

How to remove the screensaver on a computer or laptop on Windows 8, 8.1:

Go to the “Start” menu.
In the lower corner on the left side there is a button with an arrow, click on it.
In the dialog box that opens, select “Application”.
Next, a list of installed programs appears. In the upper corner of the right side of the screen we find the “Search” subsection, click on it.
Enter the expression “gpedit.msc” and run the found program.

Important! In version 8.1 there is no need to switch to a tiled interface. Since the system is already equipped with a “Start” button, in order to launch the “Local Group Policy Editor”, you can proceed to using this button.

Right-click on “Start” in the lower left corner of the display.
In the dialog box that opens, click on the “Run” subsection.
Click on the “Open” insert.
Enter the expression “gpedit.msc”, and then click on the “OK” button.
After downloading the application, the “Local Group Policy Editor” window opens.
In the insert that appears on the left side of the display, select the “Policies” subsection and click on it.
In the context menu, find and click on “Local Computer”.
Select “Computer Configuration” and click on it.
In the “Local Group Policy Editor” window that opens, select the “Administrative Templates” subsection and double-click on the folder.
In the context menu that opens, open and click on the “Control Panel” folder.
Select the “Personalization” subsection and click on it.
Find the item “Prohibit display of the lock screen” and double-click on this folder.
Information appears in the drop-down window indicating that the “Not configured” item has been activated by default.
To disable the lock screen, activate the “Enabled” item, and then press the “OK” button.

After these steps, the OS will no longer launch the lock screen during prolonged downtime.

How to remove a screensaver on Windows 10?

Let's look at how to remove the screen saver from the desktop of a computer or laptop running Windows 10:

Right-click on an empty space on the Desktop.
In the window that opens, select the “Screen saver settings” subsection and click on it.
In the context menu, find and click on the “Personalization” subsection.
In the drop-down insert, open “Lock screen”.
Scroll down the scrollbar of the display, select and click on “Screen saver settings”.
Open the “Screensaver” section.
In the list that opens, select “No”.

Opening screensaver settings via Start

You can also use another method to open the “Screen saver settings” item. To do this you need to do the following:

In the context menu, find the “Start” tab and click on it.
Select and click the “Options” subsection.
In the tab that appears, find and click on the “Personalization” item.
Select and click on the “Lock Screen” folder.
In the window that opens, find the “Screen saver settings” insert and click on it.

Disabling the screensaver via search

To open the settings window, you can use the search:

On the taskbar, click on the search icon or press the Windows Key + S key combination.
In the dialog box that opens, use the drop-down search bar to find the required name of the picture.
As a result of the search, select and click on the “Disable” subsection.

Disabling the screensaver via the command line

There is another option to open “Screen Saver Options”. To do this you need to use the command line:

In the dialog box, press the keyboard shortcut Windows Key + R.
In the window that opens, enter, copy or paste the required command “control desk.cpl,1” and press the Enter key.
As a result of these actions, the “Screen saver settings” window will open.
To disable an unnecessary picture, select the word “No” from the “Screensaver” drop-down list, and then press the “OK” button.

How to remove a screensaver through the registry?

The Windows OS registry editor is used as a kind of “storage” for the system, which contains all the parameters and settings of both the OS itself and various programs. In addition, the Registry Editor contains many other functions necessary for the smooth operation of Windows. You can use the system registry setting to prevent images from launching when the standby mode is active.

How to remove the screensaver from the Desktop using the registry:

On the left side of the screen at the bottom we find the “Start” button and click on it.
In the dialog box that opens, find the line “Search programs and files” and enter the word regedit.
Press the Enter key.

Important! If you are using the system under a user account that does not have administrative rights, a message will be displayed in the insert that appears, requiring confirmation of your action and prompting you to enter the administrator password. We enter all the necessary queries.

In the window that appears, enter the text:

Windows Registry Editor Version 5.00

"ScreenSaveActive"="0"

Important! Did you know that when you use different programs on your PC or laptop, they can run in the background, accumulate junk files and generally slow down the entire system? So that you do not have to face such problems, or if they are already observed, you have the opportunity to quickly solve them, we suggest you use step-by-step instructions and a review of the best software in the articles:

Screen saver is a dynamic drawing or pattern that appears on the screen if the user does not perform any actions with the mouse or keyboard for a specified period of time. Screen savers were originally used to protect monitors from phosphor burnout while the computer was idle; this problem is no longer relevant and now screen savers are mainly used to customize a computer or to enhance its security using passwords.

How to open the screen saver settings window

To open a window Screen saver options right-click on the desktop and select from the context menu that appears Personalization

Also, in order to open a window Screen saver options go to the following path:

Start ➯ Settings ➯ Personalization ➯ Lock screen ➯ Screen saver options

You can open the screen saver settings window using the search. To do this, click on the search icon on the taskbar or press the keyboard shortcut + S, enter screensaver in the search bar and select from the search results Enable or disable the screen saver

Still open the window Screen saver options you can use the Run dialog box, to do this, press the key combination + R, in the window Execute type or copy or paste the command and press the key Enter↵:

As a result of performing any of the above actions, a window will open Screen saver options shown in the image below.

How to enable or disable the screen saver

In order to enable the screensaver, in the drop-down list Screensaver select any available screensaver and click the button OK

To disable the screen saver, in the drop-down list Screensaver select (No), then press the button OK

You can also use the Screen Saver Options dialog box to preview what your screen saver will look like before a specified amount of time has elapsed during which no user activity has occurred. To do this, click the button View. To end viewing the screen saver, simply move your mouse or press any key on your keyboard.

Setting up screen savers

Most standard screen savers do not have customizable settings. When you press the button Options Instead of opening the screen saver settings window, only an informational message appears, indicating that the selected screen saver does not have customizable options.

There are only two screen savers that can be configured using the GUI, this is the screen saver Volumetric text And Photos.

The image below shows the window 3D Text Screensaver Options, in which you can enable the display of the current time or change the standard text to your own, as well as select the font, change the type of rotation and other parameters.

Also shown in the image below is the window Photo screensaver options in which you can choose from which folder to show photos or images, as well as the speed of the slideshow or enable a random order of displaying images. For more information on how to install and configure photos as your screen saver, see ➯

Setting up screen savers in Registry Editor

Before making any changes to the system registry, it is recommended to either export the registry section (subkey) in which the changes will be made.

All standard screen savers can be customized using the system registry editor. Let's look at the settings of some screen savers, including those that can also be configured using the graphical interface (read above in the section Setting up screen savers).

● Screen saver Feeds
All screen saver settings that can be changed use settings like DWORD (32-bit).
To change screen saver settings Ribbons, the following content:

"CameraFOV"=dword:00000010
"RibbonWidth"=dword:3dfd2400
"NumRibbons"=dword:00000008
"Blur"=dword:00000001

Description of parameters:

● Parameter value CameraFOV
● Parameter Ribbon Width determines the maximum width of flying ribbons.
● Parameter NumRibbons is responsible for the number of ribbons that fly across the screen.
● Parameter Blur affects the tape trail. When setting the value to 0, the tape mark will not disappear. When set to a higher value, the tapes will rest on each other.
● Parameter values SpanMultiMon
● Parameter AllScreensSame used for computers with multiple monitors. There are only two values available for this parameter. If you set the value of this parameter to 1, then the same configuration file will be used on all monitors and an identical splash screen will be displayed.

● Screen saver Geometric Waltz
Geometric Waltz

Windows Registry Editor Version 5.00

"CameraFOV"=dword:00000002
"LineWidth"=dword:00000014
"NumLines"=dword:00000006
"SpanMultiMon"=dword:00000001

Description of parameters:

● Parameter value CameraFOV affects the camera's approach; the higher the parameter value, the closer the tapes are displayed.
● Parameter LineWidth defines the maximum width of the line trace.
● Parameter NumLines is responsible for the number of lines that fly across the screen.
● Parameter values SpanMultiMon Only affects users with multiple monitors. Setting this to 1 allows the screensaver to move between the two monitors.

The result of making changes to the system registry is shown in the screenshots below.

● Screen saver Soap bubbles
To change screen saver settings Bubble create and apply a registry file with the following content:

Windows Registry Editor Version 5.00

"ShowShadows"=dword:00000001
"MaterialGlass"=dword:00000000
"ShowBubbles"=dword:00000001
"TurbulenceForce"=dword:499602da
"TurbulenceSpeed"=dword:00000008
"SpanMultiMon"=dword:00000001
"SphereDensity"=dword:4153a200
"TurbulenceNumOctaves"=dword:00000055
"Radius"=dword:42294180

Description of parameters:

● Using the parameter ShowShadows You can specify whether a shadow will be displayed under the bubbles. If you set the value to 0, there will be no shadow, and if you set the value to 1, then a shadow will be displayed under the bubbles.
● Parameter ShowBubbles determines the screen color. There are also only two values available for this parameter. If you set the value to 0, the bubbles will move on a blank screen, and if the value is 1, then the user's desktop will be visible when the splash screen appears.
● Parameter TurbulenceForce affects the color of the bubbles, and when set to 0, the color of the bubbles becomes black. To set the desired color, you need to experiment with this parameter. For example, in order for all the bubbles to shimmer in different colors, you can specify the value 499602da or 1234567898 in the decimal system.
● The parameter determines the average speed at which bubbles move across the screen. TurbulenceSpeed. The parameter values can vary from 0 to 10, that is, the minimum speed is set to 0, and the maximum speed is set to 10.
● Parameter values SpanMultiMon Only affects users with multiple monitors. Setting this to 1 allows the screensaver to move between the two monitors.
● Using the parameter Sphere Density You can specify the exact number of bubbles that will move across the screen. In order to find a certain amount, you need to experiment. For example, to have only 4 bubbles move across the screen, enter the value 3d278480 or 1026000000 in decimal. The maximum value in the decimal system is 2100000000.
● Using the parameter TurbulenceNumOctaves You can specify the rate at which the color of the bubble changes. Values available for this parameter range from 1 to 255. The higher the value of the parameter, the faster the color of the bubble will change. And, accordingly, if you set the value to 1, the colors will practically not change.
● Parameter Radius is responsible for the size of the bubble. Just like with the TurbulenceForce and SphereDensity parameters, you need to experiment a little to specify the size you need. The maximum value of the parameter is 435a6e80 or 1130000000 in the decimal system.

The result of making changes to the system registry is shown in the screenshots below.

● Screen saver 3D text
To change screen saver settings Volumetric text create and apply a registry file with the following content:

Windows Registry Editor Version 5.00

"AllScreensSame"=dword:00000000
"SurfaceType"=dword:00000002
"Specular"=dword:00000001
"SurfaceColor"=dword:0040ff00
"CustomEnvironment"=""
"CustomTexture"=""
"UseCustomColor"=dword:00000000
"UseCustomTexture"=dword:00000001
"UseCustomEnvironment"=dword:00000000
"MeshQuality"=dword:00000258
"Size"=dword:0000000a
"RotationSpeed"=dword:0000000a
"RotationStyle"=dword:00000001
"DisplayString"="site"
"DisplayTime"=dword:00000000
"FontWeight"=dword:000002bc
"FontItalic"=dword:010000ff
"FontFace"="Times New Roman"

Description of parameters:

● Parameter AllScreensSame used for computers with multiple monitors. There are only two values available for this parameter. If you set the value of this parameter to 1, then the same configuration file will be used on all monitors and an identical splash screen will be displayed.
● Using the parameter SurfaceType You can select the text surface style. To set the Solid Color style, the value should be 00000000. To set the Texture Painting style, set the value to 00000002, and for the Reflection style, set the value to 00000001.
● You can display highlights using the Specular. There are only two values available for this parameter. If you set the value of this parameter to 1, the highlights will be displayed.
●Using the parameter SurfaceColor You can specify the color of the text displayed on the screen. For example, if you specify a parameter value of 0040ff00, bright green text will be displayed.
● In a string parameter CustomEnvironment indicates the path to the image with reflection for the surface style of volumetric text in the format *.bmp.
● In a string parameter CustomTexture indicates the path to the image with the texture for the surface style of the volumetric text in the format *.bmp.
● Parameter UseCustomColor Another color. There are only two values available for this parameter. If you set the value of this parameter to 1, then the color is taken from the SurfaceColor parameter.
● Parameter UseCustomTexture responsible for whether the checkbox is checked Select texture. There are only two values available for this parameter. If you set the value of this parameter to 1, then the reflection is taken from the CustomTexture parameter.
● Parameter UseCustomEnvironment responsible for whether the checkbox is checked Select reflection. There are only two values available for this parameter. If you set the value of this parameter to 1, then the reflection is taken from the CustomEnvironment parameter.
● The text resolution level is selected using the parameter MeshQuality. This parameter can have 10 values. Namely: 00000064, 000000c8, 0000012c, 00000190, 000001f4, 00000258, 000002bc, 00000320, 00000384 and 000003e8.
● Parameter Size is responsible for the size of the displayed text. Available values are from 1 to 0a (10 in decimal).
● Parameter RotationSpeed is responsible for the speed of text rotation. Available values are from 1 to 14 (20 in decimal).
● Using the parameter RotationStyle You can specify the type of text rotation. There are 5 types of rotation – No, Torsion, Swing, Waves And Coups. To specify the type of rotation No, set the parameter value to 00000000. For type Torsion - 00000001, Swing - 00000002, Waves- 00000003, and to set the type Coups, the value should be 00000004
● Using a string parameter DisplayString You can set the text that will be displayed during the screen saver.
● Parameter DisplayTime is responsible for displaying the current time instead of text. There are only two values available for this parameter. If you set the value of this parameter to 1, the current time will be displayed during the splash screen.
● Using the parameter FontWeight, you can specify whether the text style will be regular or bold. In order for the text style to be normal, specify the value equal to 00000190, and if you need to make the text with a bold style, specify the parameter value 000002bc.
● Parameter FontItalic is responsible for italic text. In order for the text style to be normal, specify the value equal to 01000000, and for italic style - 010000ff.
● Using a string parameter FontFace You can specify the font for the displayed text.

The result of making changes to the system registry is shown in the screenshots below.

Other screen saver settings

Using the system registry editor, you can also completely disable the screen saver, select the specified screen saver, and also prohibit its modification, set the screen saver timeout, and specify password protection.

Disabling the screensaver
Using this registry setting, you can prevent screensavers from running. To do this, create and apply a registry file with the following content:

Windows Registry Editor Version 5.00

"ScreenSaveActive"="0"

After applying the registry file, in the dialog box Screen saver options chapter Screensaver will become unavailable. As a result, you will not be able to change the screen saver settings.

Prevent changing the screensaver
Using this registry setting, you can prevent screensavers from being changed. Additionally, the setting prevents you from using Control Panel and Personalization to add, customize, or change the screen saver on your computer. However, starting the screensaver is not prohibited.
For this setup, create and apply a registry file with the following content:

Windows Registry Editor Version 5.00

"NoDispScrSavPage"=dword:00000001

After applying the registry file, when you try to open a window Screen saver options using any of the methods described at the beginning of the article, you will receive a message Your system administrator has disabled the screen customization option in Control Panel.

Applying the specified screen saver
When using this registry file, only the screen saver that was specified in the registry file is used. Additionally, this makes the screen saver drop-down list in the Screen Saver Options dialog box in the personalization control panels unavailable. In order for the registry file to be applied correctly, you must enter the name of the screensaver file, including the extension SCR. If the screensaver file is not in the directory %Systemroot%\System32, you must enter the full path to the file.

Windows Registry Editor Version 5.00

"SCRNSAVE.EXE"="C:\\Windows\\System32\\Mystify.scr"

Screen saver timeout
Using the system registry, you can also determine the time of user inactivity, after which the screen saver starts. This setting can be set to an inactivity time value ranging from 1 second to 86400 seconds (24 hours). In the following example, the time is set to 60 minutes:

Windows Registry Editor Version 5.00

"ScreenSaveTimeOut"="3600"

Protect your screensaver with a password
You can also set a password protection for your screen saver. When using the following registry setting, all screensavers are password protected.

Windows Registry Editor Version 5.00

"ScreenSaverIsSecure"="1"

The desktop screensaver, which is also known as a screensaver, is disabled by default in the top ten. At the same time, it has now become more difficult to find, its location is not very obvious, especially for users who switched to ten straight from Windows 7 or XP. This article explains how to install and configure your screensaver.

Some users understand the desktop background as a screensaver. To change it, just right-click on the desktop and select “ Personalization».

How to open the screensaver change window

There are several ways to get to the setting the user is interested in. The simplest and most effective way is go to parameters system and start typing the word Screensaver in the search bar. Then all that remains is to open the found item.

Another way works through personalization. You can open it through the control panel or by right-clicking on the desktop and selecting the appropriate item. Here you will need to select item Screensaver.

For the third method, you will need to press win+r and enter the operator control desk.cpl,@screensaver. Then you just have to click OK. After this, the user will see a window responsible for the screensaver. It hasn't changed much since previous versions of the system.

Turn the screen saver on or off

To enable this function, the user will need to select one of the proposed items in the top line.

After that, all you have to do is click OK or accept. To turn off screensaver, you must select the very first option “no” in the same paragraph and click OK again.

On the same screen you can see exactly how the screensaver will look. To do this, click view button, which is located next to the selection field. This button starts the screensaver at the current time, the user does not need to wait until the time runs out. To interrupt the function, just move the mouse or press any key on the keyboard.

Screensaver settings using standard tools

Most of the screensavers that come with the system by default cannot be customized. If you select one of them and click on parameters, the system will display the following window in response.

Of the standard options, the configuration function is only available for Volumetric Text and Photos, but for others this will not work. For the first option, the user can change the standard text and font, can also change the rotation speed, and add a time display on the screen.

In the second case, it is only possible to specify the directory from which photos will be displayed. You can also adjust the slide show speed.

Using the registry editor

However, there is another method for editing the parameters of standard screensavers. It is not very convenient, but it is still worth using if necessary. To begin with, the user should create a restore point system, so that in case of unsuccessful edits there is somewhere to roll back. When changing settings, you will have to create files to edit the registry. To do this, you should enable the display of file extensions, after which you can create a text file, enter the required parameters into it, and then save it with the reg extension. Next you will have to act depending on the screensaver that needs to be edited.

Screensaver Tape

The file must contain the following parameters:

Changing any will entail some changes:

Screen saver Geometric Waltz

The following text should be written in the file:

Options:

Bubble

You will have to write a few more parameters into this text file.

Each one is responsible for a specific value:

Screen saver 3D text

You will have to save the text to a file with the following parameters:

Let's look at each parameter in more detail:

General settings via Registry Editor

Here are several more ways to change screensaver settings through the registry.

Disabling the Guardian

It is worth typing the following lines into the file.

Then all you have to do is apply it, and the screensaver will become unavailable for customization.

Prohibition of changing the screensaver

After applying a file with the following contents, the user will not be able to access the screen saver settings at all.

The user will receive such a message.

Applying the specified screen saver

When executing this file, the full path to the screensaver is specified if it is not stored in the standard folder. He should be with expansionscr. At the same time, the selection of a screen saver in the standard menu is blocked.

Setting a timeout

Using this file, you can set the time after which the splash screen will appear. It is indicated in seconds.

How to set a password

You can apply the content file.

Now you will need to enter a password to exit the screensaver.

Group Policy Editor for making changes

All changes made can also be made through the Group Policy Editor. To open it you will need to press win+r and enter gpedit.msc.

Next you should go to the user configuration, then to Administrative Templates, then go to the control and personalization panel. The highlighted items are responsible for the settings required by the user.

Slideshow instead of screensaver

To set a slideshow as a screensaver, the user will need to go to the standard menu and select as screensaver Photos. In the parameters you can specify the speed of changing images, as well as the directory from which all this will be taken.

Installing custom guardians

Many ready-made screensaver files can be found on the Internet. This is data with the extension scr and should be placed in a folder C:\Windows\System32\. After downloading them, the next time you open the screensaver settings, they will appear in the list, simply added to the standard screensavers.

You should also be very careful when downloading; in fact, this data is very similar to regular Windows utilities. Therefore, it is worth downloading them from trusted sites and checking each with an antivirus before use.

The best screensavers for Windows 10

Below are the best, in our opinion, screen savers for Windows 10:

— emulates the blue screen of death, all errors and pictures are real;
— shows an astronomical picture of the day from the NASA website;
— beautiful photos from Apple, an Internet connection is required to view;
— selects a random page from Wikipedia at startup;
- a classic keeper, where pipes move endlessly;
— the screensaver launches random games from the NES console and plays them automatically;
- the classic labyrinth migrated to the Ten with Windows 98;