How to set up bbk tv for cable tv. Digital TV receiver BBK SMP137HDT2

Widespread modern television there was a stir, and therefore a lot of questions, how to set up digital television. The reason for its popularity is the variety of channels in terms of direction, quality, language, type of content, etc. Due to the lack of information on setting up digital TV, companies have appeared like mushrooms after rain, charging fees for these manipulations. You don’t have to pay at all, you can actually achieve the goal on your own.

How to set up digital television on a TV - general provisions

Mostly all the ways to set up reception digital television they use approximately the same scheme, but due to the diversity of manufacturers, the actions may differ slightly, but their logic is similar. In order not to get confused in all the sequences, it is worth applying the algorithm directly to each TV model. Thanks to logic and intuition, you can correctly configure the settings on almost every TV model using the instructions provided.

1. Take the remote control and expand the menu;
2. Proceed to the “Options” item;

1. Next, you need to activate “Auto Configuration”. With this action, a window appears containing information about the signal sources; it can be a cable or antenna signal. In our case, we need to select a cable;
2. At the end of the operation, information about the quality of signal reception should appear in a new window, here you should select “Digital”, then click “Start”;
3. The final setting point is “Search mode” and select the method for detecting channels. The proposed fields must be filled in with information. The frequency is 314 MHz, the speed is 6875 kS/s, and the modulation is 256 QAM.

More advanced TV models allow you to perform a network search, which will independently perform all the necessary actions. When the desired method for detecting TV channels is selected, you need to click on “Search”.

If this instruction is not effective, you should use detailed algorithm for TVs from LG. The technique is relevant for almost all models of the manufacturer.

1. From the remote control go to the Menu;
2. Click on “Options”;
3. In the “Country” category, change the checkbox to Finland or Sweden;

1. Then go to the “Settings” category and launch “Autosearch”;
2. You need to enter a search method in the fields, usually this is enough fast type, frequency - 298 MHz, modulation - 256 QAM, symbols - 6952, ID - auto;
3. If everything is done correctly, then during the search a number of TV channels will be displayed;
4. Manufacturer LG integrates into the system automatic system search and update TV channels. This function can be inconvenient as the prepared list will be reset regularly. To prevent this phenomenon, be sure to go to the settings for connecting via cable and turn off “Auto channel update”;

1. For convenient sorting, you need to remove the check mark from auto-numbering in the “Cable” section in “Autosearch”.

Now let’s look at the Samsung method, because the manufacturer is one of the most popular in the industry. The actions are like:

1. Press Menu on the remote control;
2. Next, go to the “Channel” category (there is a satellite dish on the icon);
3. On the right you need to select the “Antenna” option, and in the type field - “Cable”;

1. Now in the “Country” section you need to set “Other”, now you will need to enter a PIN code, by default 0000;

1. Go to the “Auto-configuration” menu and specify the source of the signal – “Cable”;

1. You need to specify the parameters, they correspond to the data in the first one, general example articles, and click “Search”;
2. Now the TV will find all TV channels.

How to set up digital television on Smart TV

Digital television: how to set up channels on a TV with Smart function let's look at Samsung example. The action is performed fairly standardly, but there are some differences.

1. Go to the “Channel” section in the Menu;

1. Click on “Country”, you may now need to enter a PIN code, by default 0000, 1111 or 1234;
2. Follow the "Other" section;
3. Then, step back, select “Cable search options”;
4. Standard parameters are now being introduced;

1. Again you need to go to “Auto Configuration”, here select the “Cable” source mode;
2. You need to activate the “Digital” section;
3. Using the search mode, select “Network” and activate the setting.

All methods allow you to create a high-quality connection to digital TV channels and find the maximum available quantity interesting programs. Despite the lack of data on devices from Toshiba, Philips and others, the connection method is no different.

If you have any questions about the topic " detailed instructions on setting up digital television", then you can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>

If you want to listen to music in good sound on your computer (and there is no suitable speaker system), you can connect a home theater to it.

Equipment and accessories

What you might need if you want to connect a home theater

1. Direct cinema equipment with an acoustic system.
2. Computer with a modern audio card and motherboard.
3. The wire. Its connectors: on one side there is a tulip, on the other there is a plug like for headphones.

How to connect bbk to a computer: method 1

An important point: acoustics directly into in this case You won't be able to connect it to a video card. Because you may need a special wire. However, in this case it is necessary to use an amplifier, which will replace the cinema itself. Using a wire with “tulip” and “plug” connectors, the amplifier and sound card are connected on one side, and the amplifier and computer are connected on the other. The speakers will be connected to the cinema. If desired, an active subwoofer can be used as an amplifier.

1. At the very beginning, the wire connector, which is called “tulip”, must be connected to the sound computer card. The “out” connector is used for this.
2. The other sides of the wire (white and red) must be connected to the player (cinema) itself into connectors of the corresponding color. The order of connection is not important here, it is important to connect the wires correctly. Otherwise, the sound will not be played.
3. Next, the speakers are connected to the player. To do this, you also need to use special connectors (they are indicated by a special icon).
4. Next, you need to configure it on the computer itself sound card. To do this, in the settings you need to select the item that corresponds to the number of columns. For example, 6CH Speaker for 6 speakers. You also need to select correct connection. It will not be a microphone or headphones.
5. The cinema will be plugged in.
6. You need to properly configure the cinema itself, or rather, find desired channel sound output. The desired sound level is also selected at the cinema itself.

Another way to connect a cinema to a computer is described in our article.

Second way

There is another way to connect a bbk cinema to a computer. It is worth saying that it is more correct from a technical point of view. But still, the first method is no less safe and will not harm either the computer or the cinema. In this case, the computer must have a special connector called “S/PDIF Out”.

To do this, you also need to first stock up on the appropriate digital audio cable. The connection process itself is quite simple: one side of the cable is connected directly to the video card via the S/PDIF Out connector. The second side of the cable is plugged into the cinema. Then everything is done as described in the first method.

BBK SMP127HDT2 - digital receiver review.

In that article I will review digital receiver BBK SMP127HDT2. BBK is famous brand, according to statistics, every third family in Russia has at least one device released under the name BBK.

The model is assembled on the basis of the Ali 3812 chipset. Available over-the-air receiver DVB-T standard, DVB-T2, MPEG-2/MPEG-4 with signal reception on a regular home antenna. There is a built-in HD media player with MKV support, it is possible to record TV signal. There are HDMI and composite outputs, you can connect this set-top box to any TV. In these consoles we have quite quality set functions.

Let's see what is included in the package of the BBK SMP127HDT2 receiver.

Low frequency wire for connecting to TV,

Instructions - warranty card, 12 month warranty,

Two batteries for the remote control,

Remote control,

Receiver.

The body of the receiver is plastic, except for the bottom and rear panels, it is all glossy. The assembly is high quality and neat. On the front panel there is USB input and power indicator. If the indicator is on green light, the set-top box is on, red is off. USB port serves to connect a flash drive or hard drive, we can record on them television programs and play movies, music, etc.



On the back panel there is: power cord, antenna input, composite output (bells) and HDMI output. If you need an HDMI cable, you must purchase it separately.



Now let's get acquainted with the menu and set up channels. We connect the set-top box to the TV with an HDMI cable. We connect it to the network and also connect antenna cable. We press the power button on the remote control, the LED on the set-top box changed color, turned green, and the set-top box turned on. After switching on, a preliminary menu appears in which you can configure the starting settings.



Our goal is to get to the main menu, get acquainted with it, and implement quick setup to television channels operating in the DVB-T2 standard. Press the EXIT key on the remote control and get to the main menu of this console.

There are five items in the menu:

Media player, all items gray they will be available as soon as we connect a flash drive or hard drive,

Channel editor, here the sub-items are also gray, since the channels are not configured,

Installation here setup will happen on television programs, we’ll come back to it later,

System settings,

Settings, here you can find information about this device, factory settings, games and the ability to update via USB.



We return to the “installation” item, go to “DVBT setup”. Three sub-items appear: channel search, auto search and sort. If the antenna is oriented in the right direction, then you can use auto search, and the set-top box will scan the entire frequency range, this is a rather lengthy process. Therefore, we go to the channel search (manual search).



We choose a channel, in this case I choose 35 (relevant for St. Petersburg) this is the first multiplex. Select search, click OK, and the set-top box within a few seconds finds the channels that are present on this frequency channel. The search is completed and click OK.



In order to find the second multiplex, we go to channel 45 (relevant for St. Petersburg). Select search and click OK. The set-top box also quickly finds the second ten channels. The search is completed, click OK. We leave the menu and get to the television channels. Click OK and a window will appear with full list found channels through which we can carry out fast travel channels.



No problems with setup television channels no if you have decimeter antenna It will be enough to connect it to this console. Connect the set-top box itself to the HDMI cable (if the TV is new) or with bells (if the TV is old).

Video instructions.

To analog TV you could watch digital channels broadcasting, requires special equipment called a receiver, tuner or set-top box. BBK Electronics company in the region digital equipment succeeded. Offered on the market BBK TV set-top boxes decent quality and functionality. BBK receivers not only accept DVBT2 signals, but can also record selected programs into memory for later viewing.

The main feature of a digital TV set-top box is that there is no need, as for satellite TV, to worry about installing a bulky antenna or laying a cable. For this device to work, it is enough small indoor antenna and connecting the BBK set-top box to the TV.

While quantity available channels significantly less, limited to 20 terrestrial TV channels versus a couple of hundred channels from other solutions. But digital television broadcasting With the introduction of new multiplex equipment, their number will eventually expand, HD and even 3D TV channels will appear.

BBK digital tuners are not inferior satellite receivers in functional terms:

• high image quality;
• ability to record program inclusion planning;
• pause and rewind.

User reviews of the brand's models are mostly positive. Most often, a friendly, intuitive interface is noted. Users are satisfied fast switching channels, TV Guide (EPG) function), which prevents you from missing your favorite programs. The device’s ability to save videos and photos to small-capacity USB drives is noted, the quality playback in FullHD format.

Comparative analysis of popular BBK brand models

Given the variety of proposals, it is difficult to understand which model is better, so we present comparative analysis most popular in user environment devices.

The considered bibike consoles generally have similar functionality, the devices differs in some details:

• external design, number and placement of communication connectors;
• range of supported video and audio formats;
• data flow rate
• additional options.

Connecting and setting up the BBK TV set-top box

The method of connecting the device to the TV depends on the availability of the corresponding connectors on the TV receiver. Old TV can be connected via tulip cables through the component output of the set-top box (AV, CVBS). It is logical to connect a more modern TV receiver with an HDMI connector via HDMI cable through the corresponding port of the set-top box. If your TV does not have the connectors listed above, but there is a SCART port(in the form of a comb), you will need to purchase an adapter. The plug from the indoor or outdoor antenna must be inserted into the antenna socket of the set-top box.

Rf out port on TV box Can be used to transport to TV analog signals. To configure the BBK prefix, you need to perform the following steps.

1. Make sure that the set-top box is connected to the TV correctly.
2. To plug digital receiver to the power supply and turn on the BBK set-top box without a remote control (there is a power button on the case) or using a remote control (if there is no power button on the case).
3. When you turn on the receiver software for the first time, it will display a welcome window, prompt you to select the interface language, broadcast region, and define screen parameters.
4. Next, to initiate a channel search, click the “OK” button.
5. At the end of the search, the found channels are automatically saved.

If you need to reconfigure the device, go to the window initial setup possible after restoring factory settings. Path to the “Main Menu” mode → “Settings” → “Factory settings”.

In more detail the procedure for initial setup/reconfiguration digital tuner described in the instructions for each specific model.

Ways to solve connection problems

During operation digital electronics malfunctions may occur. If the tuner does not respond to the remote control, the first thing you can try is to replace the batteries. If that doesn't work, the remote control may be faulty and will need to be replaced.

Crashes happen when The set-top box does not pick up channels. You can try the following solutions to solve the problem.

1. Reboot the device (turn off the power and turn it on again using the power button on the device itself).
2. Launch automatic search channels. This method may cause manual channel sorting to be reset. But arrange the channels in in the right order easy after solving the problem.
3. If the first two options did not give desired result, you can restore factory settings and reconfigure the device from scratch. The sequence of pressing the buttons should be looked at in the manual for the specific model of the set-top box.

Advice! Before proceeding with the above steps, you should make sure that the receiver is not finding channels due to a software failure, and not due to problems at the local repeater.