The sound on the computer has changed. How to set up a sound card. Windows Audio Crashes
Sometimes you will have a problem with sound playback on your computer or wondering why your audio is being recorded at too low a volume level. This article will show you how to find required parameters in the panel Windows management, where you can check your settings and make adjustments.
- Go to Control Panel.
- Go to Hardware and Sound > Sound.
The Sound window will open. There are four tabs at the top (Playback, Recording, Sounds, and Communications).
If you have more than one playback device, you can switch between them or set it as the default device (for general playback) or default link item (mostly for phone calls on the computer).
To set the default playback device:
- Click on an item in the list on the Playback tab.
If "Default Item" is highlighted gray, this means that it is not selected, or is already installed.
To change the audio output level:
This is the same as changing the speaker volume.
Recording: Microphone Installation
On the Recording tab, you can see and select the available recording equipment. These devices use audio input, for example when recording audio or video, or when you need a microphone for a call or video call. If more than one item is available, you can install the one you want.
To set the default recording device:
- Click an item in the list on the Recording tab.
- Click "Set as Default" at the bottom.
Increasing or changing the recording level
If your level seems too weak, see if you can increase the volume. To check the volume of your recording equipment:
- Click right click mouse over the item in the list on the Recording tab and open Properties.
- Go to levels.
A sound card is a device in an assembly personal computer, responsible for sound reproduction. Without it, any computer, desktop or portable, will remain silent. But the silence of a device does not always indicate the absence of a sound card. Sometimes the reason is that the card's settings have gone wrong and you need to correct them. Resort to settings sound card It is also desirable when there is sound, but it is incorrect and does not appeal to your hearing.
Tune sound card First of all, it is possible through the sound manager, which is built into the system when installing drivers on this card. To open the manager window, look in the toolbar area, next to the clock, for an icon in the form of a colored speaker and click on it. For some, the trigger bar is located at the top of the monitor, for others at the bottom, and for others on the side, but the sound manager icon will always be in the clock area. However, do not confuse it with the white speaker icon, which leads to the volume control menu from Windows itself. In the window that opens, you can change any settings to suit your requirements and taste. For example, install sound effect of your choice, simulating acoustics different types music, from pop to jazz. Or give sounds a color characteristic of different conditions
We see a menu for managing computer audio devices. There are a little more options here than in the sound manager, but in general they have the same functionality. In the “Volume” and “Audio” tabs, you can adjust the type of your speakers and set the desired sound level. In the “Sound” menu, configure the sound of operations performed by the Windows system. It’s especially worth staying in the “Speech” section. This is where most often all sorts of failures in the settings lie when recording sound or talking on Skype and similar communication programs. By clicking the “test” button under the “speech recording” area, you will call the Audio Device Test Wizard to your aid. It will monitor your microphone and help you improve its performance or find a problem. You just need to follow all the actions that he himself will prompt you.
This manual briefly reviewed the system for setting up a sound card on
operating system Windows XP. In modern later builds of the system, Windows 7 and Windows 8, access to the Sound Manager panel may differ slightly. But following the logic and knowledge gained here, you can easily configure a sound card on any operating system.
In order to connect the speakers to your PC, you need to follow a number of simple steps.
- Important! If you have problems with playback, the first thing to do is call the Windows 7 troubleshooting service. This action is carried out by performing a few simple steps:
- Go to the Start menu. Opening
- double click
- left-click “Control Panel”. View mode select "Category". Double-click the left mouse button to open the “System and Security” option.
- In the “Support Center” item, select the “Remove” function
typical problems
computer."
In the “Hardware and Sound” tab, select “Troubleshoot audio problems.” Are the speakers turned on and their volume turned up? To do this, you just need to look at the main panel of one of the columns. If the LED next to the power button is on, then turn the volume control towards increasing it.
Step 2. If this step does not help and there is still no sound, then you should check the volume on your computer. In the "Taskbar", which is located at the bottom by default, with right side There are some characteristics such as time, language, internet connection. There you need to left-click on the sound icon and check the slider. If it is located at the top, then right-click on the same volume icon and select “Open Volume Mixer”. Check the volume controls.
Step 3. If everything is in order with the volume level, then you should look at the connection of the speakers in the system itself. To do this you need:
Step 4. It also makes sense to check for updated drivers for your playback device. The following steps are required:
- Go to the Start menu. Open the “Control Panel”.
- Select the viewing mode – “Small icons”.
- Double-click the left mouse button to open the “System” option.
- On the left side open window select "Device Manager".
- Double-click the left mouse button and click on the item “Sound, video and gaming devices”.
- Right click on "VIA" High Definition Audio" and select "Update drivers...". Next, it would be more preferable automatic search drivers.
In order to connect headphones to your personal computer, you need to do the same steps as with speakers, with the exception of checking that the headphones themselves are turned on if these functions are missing.
On a note! To solve the problem with sound playback , It is important to take into account the fact that your sound-playing device is working and has no technical breakdowns. To do this, it is recommended to check the purchased product immediately in the store.
If this opportunity is missing, then it makes sense to check the functionality of the product on other devices.
Video - How to turn on speakers on Windows 7
If you have problems with sound on your computer, then there is no need to despair, perhaps you just need to re-adjust the sound and then everything will work out. It happens sometimes that the sound drops out due to incompatible programs or other problems. You need to start by checking to detect problems with sound. If you see a volume indicator in the taskbar in the lower right corner of the screen, then right-click on the volume icon (if the volume icon is not displayed, then we will consider this issue the same way later). In the window that opens, click on the value – Detect audio problems.
If you do not encounter any problems with the sound, then right-click on the volume icon again, and in the window that opens, click on the value - Playback devices.
Next, in the window that opens, right-click on the Speakers tab, and in the window that opens, click on the Check value. After which you should hear sound signal, then the sound is working, click on the OK button below. Now check the sound on your computer again, turn on some music or video.
If the sound still does not appear, try turning it off in the same way, and then turning the sound back on. Try setting up your speakers. Just try restarting your computer, sometimes after a reboot everything goes back to normal and the problem is fixed.
Now for those who have in the taskbar, in the lower right corner of the screen, the volume indicator icon is not displayed. In the lower left corner of the screen, open the Start menu. In the window that opens, click on the All applications tab (Windows 10).
In the list of all applications, at the very bottom, find and open the tab Utilities - Windows. In the list that opens, click on the tab – Control Panel.
Next, on next page Click on the tab - Sound. In the window that opens, right-click on the Speakers tab, in the window that opens, click on the Test value, a beep should sound. Follow all the recommendations described above.
After checking the sound, the sound should work. Also check in the properties, click on the button at the bottom of the window - Properties, in the window that opens, check that under the heading Device Application the value is displayed - Use this device (on).
Another one possible reason – no sound program Realtek driver HD Audio. Download latest version You can download Realtek HD Audio programs for free from the website Free programs RU. Download the program and install it on your computer.
This post discusses the most basic reasons and methods for setting up and restoring sound on Windows computer.
How to adjust sound, sound does not work on a Windows computer updated: May 3, 2016 by: Ilya Zhuravlev
Setting up sound on your computer
Personal computers have a sound subsystem - these are all the components responsible for sound reproduction. If one of these elements fails, there may be no sound on the computer. The failure can be either software or hardware (failure of the sound card). First, let's figure out what elements are included in the sound subsystem, and then we'll look at how to set up sound on a computer.
Main components
A sound card is a device designed to reproduce sound; it can be built-in or separate (discrete). In most cases, built-in sound cards are found.
Playback devices
This includes all devices responsible for sound reproduction: headphones, speakers, etc. It is worth including in this section and wires connecting all audio devices. Common cause The reason why there is no sound on the computer is a faulty wire.
Audio software
Driver for sound card. If the driver is missing, there will be no sound on the PC.
Codecs - set special libraries, designed for playing certain audio formats on a computer. As a rule, the main codecs are already preinstalled in Windows; if necessary, you can install additional ones. It is worth noting that the absence of some codecs will not lead to complete absence sound on PC. There will be no sound only when playing some audio formats.
The sound may disappear certain period time, i.e. during operation of the computer or missing from the moment of its purchase.
If there was no sound initially, then you need to make sure correct installation sound card, if it is discrete. After that, make sure that the speakers are connected to the computer correctly. You can check them by connecting, for example, to a phone.
After connecting to the PC, you will need to configure the speakers on the computer. To do this, you can use the Realtek utility:
Open by going to the control panel " Realtek Manager HD";
On the right side there is a connection diagram, click on it and select the playback device you want to connect.
Driver installation
Open Device Manager and see if the driver for your sound card is installed. If the driver is missing, the sound card will be displayed as unknown device. If the driver is not installed, it can be downloaded from the official website, depending on the sound card manufacturer, or, if the card is discrete, it must include a disk containing the driver.
If the sound disappears after Windows updates or driver installation, this may indicate an incorrect installation sound driver. In this case, removing the sound card in the task manager will help solve the problem.
Removing it is accompanied by removing the drivers and rebooting the computer. If you updated the driver and then the sound disappeared, you can roll back to the previous, working version of the driver. To do this, in the Driver tab, in the properties of the sound card, click “Roll Back” and restart the computer.
Checking sound settings in Windows
There is a speaker icon on the taskbar; it is possible that the volume level is set to minimum. To check this, click on the speaker icon and drag the volume slider up if it is set to minimum. If there is a crossed out speaker below the bar with the slider, this means that the sound is turned off; to turn it on, you need to click on this speaker, after which the sound will turn on. If the speaker is marked with a white cross in a red circle, you need to check the settings of the playback devices, for this:
Go to the control panel, to the “Sound” section;
Select “Playback devices”;
If nothing is selected in the Playback section, only " Sound devices not installed", you should right-click and select "Show disabled devices". After that, further adjustment of the sound on the computer is made by selecting required device playback
Checking system services
If you still can’t get sound to appear, you should check whether audio services are disabled, to do this:
We go to “Start” and register in search bar services.msc, after which we open the found file;
Select Endpoint Builder Windows points Audio" and go to "Properties". Going to the “General” section, check which startup type is selected, it should be “Automatic”. If the services are stopped, you should start it by clicking the corresponding button.
There are cases where the sound disappears due to the computer being infected with malicious software. mi programs. To check your computer for viruses, just install an antivirus and scan the system. There may also be problems with system files, in this case, system recovery will help.
In any case, you need to know how to properly configure the sound on your computer; without sound you will not be able to fully use all the capabilities of your personal computer. There are many various situations, which contribute to the lack of sound on the computer, to solve which you need to have certain knowledge or have it in stock basic instructions about how to set up speakers on your computer. After spending a certain amount of your time, you will definitely find the cause of the problem and be able to configure it yourself, returning the sound to your PC.
