Menu
homeAndroid

Apple iPhone SE vibrates on its own. iPhone vibration doesn't always work

Sometimes iOS devices can behave strangely. For example, the problem of spontaneous vibration is very typical for smartphones: the iPhone vibrates while charging, when connected to a computer, or simply vibrates without stopping after updating to iOS 12, and even does not turn on. Wondering what is happening, users begin to try to fix the device with everything accessible ways, press all the buttons in a row, reboot it, turn off the sound, etc. These methods may not work, then the Tenorshare ReiBoot program will come to the rescue.

Why does my iPhone vibrate non-stop and won't turn on?

Today we want to take a closer look at the problem of why the iPhone vibrates incessantly and does not turn on yet. This is usually caused by a system error that somehow puts the phone into a vibrate state. In order to solve this problem, you can try the following.

If your iPhone vibrates continuously but is turned on, go to Settings and try changing the vibration settings. Perhaps this can solve the problem. It is unlikely that this will help, so you can try rebooting the device. If your iPhone vibrates and won't turn on, you can try doing a hard reset. To do this, hold down the power button for a few seconds; then, without releasing it, hold the HOME button (on iPhone 7, the volume down button); The device will restart, then gradually release both buttons and the iPhone will stop randomly vibrating.

If your iPhone vibrates when charging or when connected to a computer, you can try disconnecting the cable from it, or also forced reboot. If none of these methods help, we suggest you use very simple tool– program. This utility solves most problems by entering and exiting recovery mode.

What to do if your iPhone vibrates by itself?

When your iPhone vibrates periodically, you have no other choice, try free program Tenorshare ReiBoot. It can solve hangs on iPhone, allows you to restore system failure through alteration. If your iPhone is constantly vibrating after updating to iOS 12, then Tenorshare ReiBoot can help. In addition, if the iPhone is stuck in recovery mode, on an apple, it constantly reboots, even if you want, this will be done with using Tenorshare ReiBoot.

1. Download the Tenorshare ReiBoot program from the official developer website, and then install it on your computer.

2. Connect your iPhone to your computer using a USB cable. Tenorshare program ReiBoot should recognize your device.

3. Now click on the “Enter Recovery Mode” button. Your iPhone will be put into recovery mode. You will see the iTunes logo on the screen and USB cable. The device has successfully entered recovery mode.


4. As soon as the “Exit Recovery Mode” button becomes active, click on it and the phone will reboot. After restarting, the iPhone will stop vibrating and will be ready to use again. Please note that there is also another button here "Solve All iOS Freezes" which can be used to solve problems such as. blue screen death, iPhone stuck on a black screen, etc.


Tenorshare ReiBoot can be useful and Mac users, and the owner of Windows computers; You can download it absolutely free.

Every time there is an alert or warning, e.g. incoming call, the iPhone starts to vibrate to let you know. This is very convenient when the phone is in your pocket or silent mode. But sometimes vibration does not occur, which can cause important calls and alerts to be missed.

There are many reasons why your iPhone won't vibrate, ranging from incorrect settings to hardware issues such as a broken vibration motor. If you encounter such a problem, this guide will try to help you get vibration back on your iPhone and tell you what to do if the motor doesn't work.

1. Turn on vibration when calling and in silent mode

  • Launch Settings and open the Sounds section.
  • There you will see two switches: “During a call” and “In silent mode”. If you turn on the first one, the iPhone will vibrate unless it is in silent mode.
  • If you activate the second one, vibration will occur even in silent mode.
  • Enable one or both of these settings depending on your preference.

2. Reset settings

If your iPhone still does not vibrate after setting the settings to the desired position, there is alternative way: Reset your device. This will not result in the loss of any data, but will cancel everything custom settings, returning them to their original state.

To reset iPhone settings, proceed as follows:

  • Open Settings.
  • Enter the "Basic" section.
  • Scroll to the bottom and click Reset.
  • Select "Reset all settings" and confirm.

After performing the reset, check if your iPhone vibrates in the right situations.

3. Perform a system restore

If none of this helps you, here's last resort: iPhone recovery.

  • Do backup copy data at iTunes help or iCloud.
  • Connect your device to your computer.
  • Launch iTunes.
  • Go to the Summary page.
  • Select "Recovery" and follow the onscreen instructions.

After recovery, repeat the check.

4. Repair of vibrating motor

If after all this, your iPhone still doesn't vibrate, it could be a hardware problem. Before taking your phone to be repaired, Apple Store, it is worth checking whether the vibration motor on the device is working. To do this, open Settings → Sounds and turn on vibration in silent mode. If the phone vibrates, the motor is fine and the problem lies in the software.

Otherwise, check again to be sure. On the same settings page, turn on vibration in silent mode and during a call, and then switch the modes back and forth. If your iPhone still doesn't vibrate, it means the vibration motor is faulty. Take it to an Apple Store for repair.

Vibrations are the most common problem encountered iPhone users 6. After IPhone output 7 similar problem began to appear on new devices. Let's figure out why vibration doesn't work on your iPhone and how to fix it yourself in a few minutes.

The reason for a component not working may be the following:

  • The result of a non-root update of the operating system;
  • Part corrosion;
  • Broken vibration motor contacts;
  • Mechanical failure of the vibration motor;
  • Moisture gets inside the phone case.

Before you start repairing your iPhone, you should exclude all software problems, which are temporary.

We eliminate possible failures in iOS

First, try simply restarting your phone or resetting the settings by restoring a backup copy of your data. If the vibration was turned off by any installed program, the problem will disappear. Upgrade your OS to more new version firmware.

Go to your iPhone settings and open the “Vibration” window. Make sure that the fields next to them are set to “Default”. Then click on the vibration parameters and select a different signal display mode, as shown in the figure:


Moisture got into the iPhone - what to do in this case?

If you drop your iPhone in water or get caught in the rain with the device, liquid may accumulate in the case, which prevents the parts from working. The only way out is to dry the phone. This needs to be done as quickly as possible. Immediately after moisture gets into the phone, unscrew back cover. To do this you will need a set of screwdrivers for iPhone, a suction cup (for detaching display module from the back cover) and a plastic spatula (spudger).

Attention! Be sure to turn off your iPhone before removing the cover.

Dry the device with a special hair dryer (not a household hair dryer) or place the device in a bag of rice. This will absorb all the moisture. For achievement best result It is recommended to remove the battery and dry it separately from other components. After bringing the device to normal look The vibration motor will operate as normal.

Replacing the vibration motor on an iPhone with your own hands

The most common reason why vibration on an iPhone does not work is a breakdown of the vibration motor, that is, the component that is responsible for generating low vibrations. audio frequencies, as a result of which the vibration process begins.

The part itself looks like this:


Before starting repairs, make sure you have everything necessary tools, namely:

  • A set of screwdrivers for opening the case and patch screws;
  • Spudger;
  • Sucker;
  • New vibration motor.

First, open the back cover and use a spudger to detach it from the display. Then you need to unscrew the protective panel motherboard and using a spudger, disconnect the three cables shown in the figure:


Disable the battery by first disconnecting its cable. Now you can start replacing the vibration motor. Remove the two highlighted screws:


Using tweezers or your fingers, carefully remove the bracket that covers the vibration motor. Then unscrew one screw at the inner end of the case (it connects the motor assembly to the phone).

Remember how the original motor is installed. Remove the part and replace it with a new one. Secure the motor so that it is positioned correctly in relation to all contacts. Assemble and turn on the iPhone.

Any instructions for self-repair You can find your iPhone on our website, or call a specialist for to any place convenient for you.

Many users of gadgets from Apple They are faced with a problem when the vibration on the iPhone does not work and the sound disappears. The most common cause of problems is incorrect settings sound. To fix the situation, just check the settings Apple smartphone and set the required parameters.


If the sound settings are ok, but iPhone vibration If there is no sound or the sound has disappeared, you should look for the cause of the problem in the hardware of the device.

The main reasons for the vibration signal malfunction on Apple smartphones

If vibration on your iPhone does not work, first check your sound settings. Perhaps the Apple smartphone has silent mode and the absence of vibration lies precisely in this. If the settings are normal, but there is no vibration signal, the problem is likely due to the following:

  • incorrect operating system update
  • oxidation or corrosion of elements
  • mechanical damage to the vibration motor
  • Vibration motor cable rupture
  • moisture getting inside the case

Any mechanical damage iPhone can lead to disconnection of contacts, which is common cause device malfunction. To determine what caused the problem, it is recommended that you first diagnose your phone.

No sound or vibration signal due to system failures

If the vibration of your Apple smartphone does not work correctly, try resetting the device to factory settings. Some app is probably turning off vibration or automatically setting it to silent mode. You can solve this problem as follows:

  • reboot your smartphone (press the power button and Home button, hold for a while)
  • restore backup
  • download latest version firmware and update the system

Usually these actions solve the problem. If the fix system errors did not help, try looking for another cause of the breakdown.

Phone damage due to moisture

The vibration alert on a smartphone often stops working due to moisture getting inside the case. If a few drops of water get on it while using the phone, this can lead to oxidation of the contacts and, as a result, the vibration signal does not work on the iPhone. To deal with the breakdown yourself, you need to do the following:

  • prepare special set tools for repairing Apple equipment
  • turn off your phone
  • carefully unscrew the bolts on the body of the Apple smartphone
  • install a special suction cup on the front panel and pull it slightly towards you
  • open the connectors
  • remove the housing cover and disconnect the battery cables
  • remove the battery and dry the iPhone with a hairdryer

After this, assemble the phone in reverse order, turn it on and check the settings. If the vibration signal still does not work or there is no sound when calling, the vibration motor most likely needs to be replaced.


Replacing the vibration motor

If the iPhone does not work correctly in vibrate mode, then possible reason malfunction - the vibration motor is damaged while using the phone and needs to be replaced. Before you start repairing your equipment, it is recommended to check the settings and reboot the device by holding the power button and the Home button.

After reboot you need to enable desired mode on your phone and check its operation. If this does not help, call an experienced smartphone repairman through the Yuda online platform. It is not recommended to replace the vibration motor yourself.

Professional smartphone repair

If the iPhone vibration signal has stopped working or you cannot turn on the phone, contact Yudu artists for help. Cooperation with private owners has the following advantages.