Menu
homeiOS

Remove silent mode on iPhone. Silent mode on iPhone and Do Not Disturb mode - differences

iOS provides two ways to prevent your iPhone from ringing in inappropriate situations. For example, you can turn on silent mode (using the switch located on the side) or configure the “ ” software function. Both methods mute the sound, but there are significant differences between them, which not everyone knows about.

In contact with

Silent mode on iPhone

The easiest way to mute your iPhone is to use the switch located above the volume buttons on the left side of the case. Surely many people already instinctively reach for the switch when they go to a cinema, school, church, etc., without even realizing it.

The above method mutes calls, messages, notifications and even games, but the iPhone will still vibrate when there is an incoming call, and the screen will light up when receiving an SMS. You can turn off vibration by going to " Settings» → « Sounds, tactile signals" and moving the switch opposite " to the left Vibration in silent mode e".

Even though vibration will be turned off, the screen will still light up when there is an incoming message.

Do Not Disturb Mode

When the mode is activated " Do not disturb» iPhone will remain silent and the screen will remain turned off for incoming calls and messages. However, you can set up exceptions so you don't miss an important call.

ON THIS TOPIC: .

Enable " Do not disturb"There are two ways. The simplest of them is to swipe your finger across the screen from bottom to top, calling “ Command centre", and click on the crescent moon icon.

The crescent icon in the status bar will indicate that the mode is enabled "Do not disturb":

You can also go to " Settings» → « Do not disturb" and move the switch opposite " Do not disturb».

You can select a specific time when you want your iPhone (iPad) to go into silent mode (for example, at night from 23:00 to 6:00). In addition, the settings allow you to select contacts from which calls can be received even when the mode is activated "Do not disturb". Function "Call Allowance" Allows you to allow calls from everyone, no one, selected users or specific contact groups.

Option "Repeated calls" allows you to receive repeated calls from particularly persistent ones if they were made within three minutes after the first one. Mode "Silence" Allows you to turn off beeps whenever or when your iPhone is locked.

When is it recommended to use silent mode or Do Not Disturb mode?

The main difference between the two modes described above is the glowing screen when receiving messages and notifications if silent mode is activated. If you are used to carrying your iPhone in your pocket or bag, then there is nothing easier than turning off the sound by sliding the switch with one movement of your hand. However, keep in mind that vibration can be just as annoying and attention-grabbing as a ringtone.

If you always keep the device in your hand, on your lap or on a table, then it is best to use the “ Do not disturb"so that the glowing screen does not catch the eye and does not cause unnecessary attention.

Surely many iPhone users have had to choose between turning on silent mode and activating the Do Not Disturb function.

Both of these options are used to turn off sound in iOS, but their functional characteristics are different. Therefore, it is worth understanding their differences.

Features of silent mode

To launch silent mode on the iPhone, just move the lever located on the side of the device. This action takes almost no time and is very convenient, so almost all smartphone owners use this method in a variety of situations.

  • Settings
  • Sounds
  • In silent mode

Using this option involves turning off all signals, notifications, and application sounds. At the same time, the phone continues to receive messages with calls, which are reported to the owner by means of vibration and a lit-up screen. If there is a need to prevent the display from being activated, you need to use another mode.

How to enable Do Not Disturb feature on iPhone?

By using this option, the owner of the gadget completely turns off the display and all kinds of sounds. The only exception would be calls to contacts from the favorites list. To enable Do Not Disturb mode, you can use two methods: configure it automatically according to a given schedule, or do it manually by visiting the Control Center.

You can call up the enable option by pulling two fingers down from the top edge of the screen and select “crescent” in the menu that appears (screenshot on the left), or select the appropriate item in “Settings” (screenshot on the right):

If the function is active, a small crescent moon will appear in the status line. You can set a specific time in your schedule when calls with messages will be automatically muted. Turning on a certain toggle switch will allow contacts from the favorites list to be dialed when they call again within three minutes. Typically, the mode is active only when the screen is locked, although certain settings can prevent calls while using the iPhone.

The main differences between the listed functions are determined by the scenarios of their application. It is preferable to use silent mode if the mobile device is in a bag or pocket, since it will not be distracting with a lit screen. At the same time, the owner of the phone remains aware of incoming calls. Its use will be especially relevant when watching films in a cinema, at an exhibition, concert, etc.

If the owner of an iPhone requires maximum concentration in practice, then it is preferable to use the second method, which can completely protect against annoying calls.

Or in the system. After all, there are places where filming is not prohibited, but making noise is prohibited. At such moments, all device sounds should be turned off. And, as a rule, mobile devices in such places are asked to be turned off. But you can get by with silent mode. Silencing the sound on an iPhone is often done in a few steps.

How do we turn it off?

How to turn off camera sound on iPhone 5? It's not that difficult to do. The main thing is to know exactly how to act. Before solving issues with turning off sounds on Apple devices, you will have to decide exactly how to proceed. In practice, there are several approaches to solving the problem.

Namely:

  • putting iPhone into Silent mode;
  • use of special utilities;
  • connecting a headset;
  • game with smartphone settings.

In reality, everything is much simpler than it seems. And even a person who is poorly versed in Apple products can cope with the task assigned to him.

Headphones

How to turn off the sound on an iPhone on the camera? The simplest solution is to connect a headset to the device. In this case, there will be sound, but no one will hear it.

What to do? Required:

  • turn on your mobile device;
  • insert the headphones into the designated jack on the phone;
  • use the camera for its intended purpose.

If a person uses wireless headphones, the connection occurs via Bluetooth. The corresponding item is located in the gadget settings. After selecting a headset and synchronizing it, the sound on the camera will be muted.

Settings

But this is only one of the possible scenarios. Now we can consider a somewhat non-standard solution. How to turn off the sound on an iPhone on the camera? The following instructions will help you do this:

  • Load your iPhone and press the Home button. It will open the main menu of the device.
  • Go to "Settings" - "Sounds".
  • Move the slider to the left to the maximum. We are talking about a mark in the “Calls and applications” block.
  • Save changes.

This technique is not used very often in practice. He's not too fast. However, you can forget that the sounds on the iPhone are disabled in a similar way. Therefore, it is recommended to act differently.

Toggle switches

How to turn off the camera sound on an iPhone 5S or any other? The fastest, simplest and most reliable solution is to use a special toggle switch. This is a button located on the side panel of the device. What is she doing? Enables Silent mode on an Apple device. All modern Apple phone models have such a switch. It is enough to simply move it to the appropriate position.

Applications

How to turn off the sound on an iPhone on the camera? There is another somewhat non-standard approach. It consists of editing the file responsible for the sound of the mentioned component. This can only be done by using third-party applications.

To mute the sound on an iPhone on the camera, do the following:

  • Download MobileFinder and install the utility on your PC. You can find it in the AppStore.
  • Connect your iPhone to your computer via USB.
  • Launch the latest version of iTunes and sync your devices.
  • In MobileFinder, follow the path System/Library/Audio/UISounds.
  • Double click on the photoShutter.caf document.
  • Change file name.
  • Apply adjustments.

That's it, now you can take pictures quite easily. We learned how to turn off the camera sound on iPhone 4 and more. In addition to the above steps, users sometimes download specialized software for working with the camera. There is a lot of it. Basic applications can be found through the AppStore. Some programs have special buttons that control camera sounds. If you set the switch to the appropriate position, you can switch the device to Silent mode.

During a call

From now on, it’s clear how to turn off the camera sound on iPhone 5 or any other model. Some people think about muting the sound during a call. This technique has nothing to do with the camera, but sometimes it can be extremely useful. To mute the sound of an incoming call, you just need to hold down the "Power" button and the volume control toggle switch for a few seconds. Usually in this situation vibration is turned on and nothing more. All the techniques presented to your attention really work. How to turn off the sound on an iPhone on the camera? The answer to such a question will not confuse a person. You can solve the problem in a few minutes. We now know all the basic techniques for muting sound on the camera and on the iPhone itself.

Apple produces premium smartphones, but sometimes some of the functions are difficult to figure out - out of habit after Android or just at the initial stage of use. For example, how to enable silent mode on an iPhone, as well as how to customize it to suit your needs. Let us immediately note that there are two ways to get rid of excess sound, differing in complexity and capabilities.

How to enable silent mode on iPhone

An easier option is to use the silent mode button on the iPhone. Yes, yes, the developers have installed a separate key for this, which is located on the left side of the smartphone, just above the volume control.

In its normal state, the switch directs all sounds to the device's speaker. To turn on silent mode on your iPhone, move it as shown in the figure. If everything is done correctly, an orange background will become visible. In this mode, the device will not sound notifications or calls. By default, the device will notify you of a call/notification by vibration.

Features of silent operation

Please note that this silent mode on iPhone 6 and subsequent models does not affect other sounds. Accordingly, if you set an alarm clock in the Clock program, it will still play. The same applies to music playback or special effects in games.

Another feature is that if you set the iPhone to silent mode as described above when a headset is connected to the smartphone, the sounds in it will still be heard. That is, the “silent” button exclusively affects sound reproduction through a regular speaker.


Finally, keep in mind that in silent mode, the smartphone will still automatically turn on the screen when a new message arrives or show a notification when necessary. This won't hurt if the iPhone is in your pocket or bag, but if it's in sight, this behavior can be distracting.

Setting vibration

If you want to fine-tune this mode, you need to refer to the settings. Before the 7th model, to do this, you must first go to “Settings” and then open the “Sounds” section. On devices from the seventh iPhone and newer, another sub-item is used, which is called “Sounds, tactile signals”.

At the very beginning it is indicated when the device should use vibration. If you don't want it to buzz when you activate the Quiet feature, move the corresponding slider to the left to turn it off. An alternative is to change the vibration pattern. You can choose from preset sequences or program your own. In the latter case, use the “Create vibration” sub-item, and then draw the desired signal pattern in graphical mode by touching your finger.

In the same section you can get rid of other sound signals. For example, if you want not only to remove calls/vibration, but also to disable the clicking of the virtual keyboard when typing or the signal that is given when the system is locked or unlocked. In this case, scroll through the settings to the appropriate item and deactivate it.

Do Not Disturb Mode

As you can see, there are a lot of limitations to using a mechanical switch. Therefore, Apple has provided another way to enable silent mode on the iPhone. And even without displaying notifications and other distractions, in order to maintain the blocking state to the maximum and not once again distract the owner’s attention - for example, at an important meeting, during classes, or while the owner is meditating.

The name of this function is self-explanatory – Do Not Disturb mode. The easiest way to activate it is using the remote control. To do this, swipe from the bottom up, from the bottom edge of the display (in the iPhone X everything was changed a little, you need to swipe from the top right corner).

You can also go to quick settings directly from the control panel. To do this, you do not need to touch the icon, but press it with some force. The system will display a menu with different options - activate for a specific time while you are in the same place or for the duration of a scheduled event.

Another way to set your iPhone to silent mode is through the settings. There is a special item dedicated to it in the device menu. It is convenient because it allows you to more accurately change the mode parameters.

For example, you can switch the device to permanently quiet mode. If you need to specify a specific time frame, use the Scheduled radio button and then specify a period. This makes it convenient to turn off notifications at night.

Additionally, you can specify a list of contacts whose calls the phone will allow to attract your attention. To do this, select the appropriate item and mark “favorites”.

More detailed settings can be found in the official Apple Help: https://support.apple.com/ru-ru/HT204321 .

In addition to more effectively muting signals, Do Not Disturb mode solves the issue of how to mute the sound on an iPhone if the button does not work - because it is activated regardless of the keys.

Modern mobile phones perform a variety of functions. There are a large number of settings and options for this. Today we have to find out, and simply on a smartphone.

Every owner of Apple products should know about these two processes. Bringing your idea to life is not that difficult. It is enough to adhere to certain algorithms. What should every user pay attention to? How do you turn off sound on iPhone?

Not always possible

Before answering this question, it is necessary to pay attention to the fact that it is not always possible to bring an idea to life. Silent mode for Apple gadgets is not enabled in all cases.

By default, the iPhone camera setting allows you to mute the sound while shooting. But if the device is made in South Korea or Japan, for example, there will be no such option.

This phenomenon is due to the fact that a number of countries prohibit by law filming in silent mode. In this case, it will not be possible to refuse sound while taking photographs using standard methods.

Standard approach

Fortunately, such circumstances do not occur very often. Therefore, you can often easily figure out how to turn off the sound on an iPhone (on the camera and smartphone in general). No complex operations are required. Using standard actions, everyone will be able to take photographs silently.

Please note that the camera mutes automatically when you put your iPhone in silent mode. This is far from the best scenario, and it is not convenient for everyone. However, without jailbreak there is no longer any way to turn off the sound of the camera on an Apple smartphone.

How to put iPhone into silent mode? To do this, you just need to press the silent mode button on your mobile device. Today, a similar switch is available on all iPhone models. It is located on the sidebar.

As soon as the owner of the Apple phone moves the switch to the desired position, the indicator on the device will light up, and an image of a crossed out bell will appear on its display. The smartphone will stop making sounds, but the alarm clock on it will work in full force.

During a call

Now it’s clear how to turn off the sound on an iPhone on the camera and the gadget in general. This is only one of the possible techniques, a standard approach to solving the problem.

Sometimes you need to mute the incoming call, not the camera. This is not difficult to do. As in the previous case, the owner of the mobile phone must press a specific key combination.

To mute an incoming call on an iPhone 5S or any other Apple phone, you will need to simultaneously press the “Volume” and “Power” buttons. After a single click, the device will go into silent mode. Pressing again will reject the incoming call.

Jailbreak

There is another option for the development of events. The thing is that you can turn off the sound on an Apple phone not only by using a special switch. This method is good for gadgets without jailbreak. What to do if this process has already been carried out? Then the answer to the question of how to turn off the sound on an iPhone on a camera will require different actions.

Namely:

  1. Download any file manager that works with iOS to your computer. For example, iFunBox or iMazing.
  2. Launch the corresponding application on your PC.
  3. Connect iPhone to computer using a special cable.
  4. Go to the System-Library-Audio folder. Find UISounds there. Open it.
  5. Find the document photoShutter.caf. Rename it. This file is responsible for the camera sound. After changing the name, it will no longer be recognized by the operating system.

That's all. To return the camera sound, you will have to return the mentioned document to its original name. There is nothing difficult or special about it.

Applications

How to turn off sound on iPhone on camera? The last way is to use a variety of specialized programs. Not the best or most effective, but a convenient option for the development of events. As already mentioned, the switch on the phone mutes the sound completely. And special programs are only on the camera.

To bring your idea to life, you can pay attention to the following applications:

  • No Cam Sound;
  • Silent Photo Chill;
  • Bye Shutter Sound.