Reset zyxel keenetic giga 2 settings. Default password for the new generation Zyxel Keenetic router

Views: 1554 If you somehow configured your router incorrectly Zyxel Keenetic, or the router is unstable, then you can reset the settings to factory settings. In this article we will look at two ways in which you can reset settings on routers Zyxel company Keenetic: using a special

If you somehow configured your Zyxel Keenetic router incorrectly, or the router is unstable, then you can reset the settings to factory settings. In this article we will look at two ways in which you can reset settings on Zyxel Keenetic routers: using a special Reset button, and through the control panel. In fact, this is a very useful function that often comes in handy when using any router, not just Zyxel.

I myself often reset routers, especially during the setup process. When something doesn’t work out, I just reset it and start the setup again. And also, restoring parameters will definitely come in handy in the event that you have forgotten the password for your router. More precisely, the password to enter the settings.

Hardware and software reset on Zyxel

The easiest way to reset is to press and hold the button for 10 seconds RESET (Reset) on your Zyxel Keenetic router.

Reset will completely clear all parameters. You will need to reconfigure your router. Set connection parameters to the provider, set up a Wi-Fi network, etc. You can configure it using the setup example ZyXEL router Keenetic Start.

After this, all settings will be restored to factory settings. Button Reset It is recessed into the router body, so you need to press it with something sharp. Press and hold for about 10 seconds, the router's power should be turned on.

The power indicator should blink actively and the router will reboot. This means that the settings have been restored.

Soft reset (via control panel)

Go to the settings, if you don’t know how, then see the instructions. Go to the tab System, and select from above Parameters. Click on the button Return to factory settings.

A warning will appear that all settings will be deleted and all that. Click Yes.

We wait until the router reboots.

That's all, the settings are reset. As you can see, nothing complicated. If you still have any questions, ask them in the comments.

Sometimes a situation arises when you need reset Zyxel router settings. This may occur due to various circumstances, for example: you forgot your password for web interface, you can’t connect to the router’s IP address or Zyxel has started to behave inappropriately (in common parlance it’s buggy). To do this, it is recommended to reset the settings to factory settings, i.e. return everything to the moment when you just bought the router without any settings. In this article I will describe several ways to do this.

Attention!!! Resetting your settings will result in a complete loss of your settings (Internet, Wi-Fi, etc.).

There are three ways to reset Zyxel to factory settings:

Hard reset Zyxel Keenetic.

This is the most popular and requires the least effort method. Everything happens when the router is turned on. It is necessary to press the Reset button(Reset) on the router and hold for about 10 seconds until the power indicator blinks.

After this, your router will reboot and the settings will return to factory settings.

Soft reset.

To do this method, you need to connect to the Zyxel web interface, go to the "System" menu, select the "Options" tab and click the "Return to factory settings" button.

Confirm your choice.

After this, the router will reboot and return to its original state at the time of purchase.

Reset settings using Telnet.

This method is suitable for ascetics, since it involves connecting to the router using Telnet and entering commands. First of all, download free utility to connect via telnet - download putty(you need to download putty.exe). You can also connect via telnet with a command line Windows strings, to do this, you first need to enable the telnet component in Windows components. Run the downloaded file. IN line Host Name enter 192.168.1.1 , select below telnet and press " Open".

In the window that opens, enter your username and password for the Zyxel web interface.

NDMS 1	NDMS 2
flash default sys reboot	copy default-config startup-config system reboot

Thus, you can reset your router settings without much difficulty.

It happens that a user buys used network equipment to connect to the Internet. The device already has set parameters from the "old" owner. Sometimes it happens that the settings made on a recently purchased router are lost. Then it becomes necessary to reset them and install new ones.

In Zyxel Keenetic routers, resetting saved settings is carried out in several ways.

Let's take a closer look at them.

Zyxel device configuration has two recovery methods: hard reset and software reset.

The first is done using mechanical key router. This option is suitable for situations where the “user” is not allowed to log into the “Control Panel” of the router.
The software method is suitable for cases where the Zyxel device is not physically accessible. For example, it is located in another building. The administrator connects to the router and reboots Zixel through the control menu.

“Reset the configuration” means returning it to the “factory” one, again for work.

Via web interface

Each network equipment has a “Control Panel”. This is a web page with standard addresses: 192.168.1.1 or 192.168.1.2. You enter your login and password for authorization. If the user has not changed the default login information, find information possible on a Zyxel case. The IP address of the web interface is also indicated there.

In the window that opens, go to the “System” section (gear icon at the bottom of the page). In the first item “Settings” there is an option to restore factory settings.
After clicking, a confirmation message with warning text will pop up. Once the approval made by the user is received, the reboot will begin.
As a result previous installations will be reset, factory defaults will be restored, and the device will be ready for use.

Hardware reset to factory settings - Reset

A hard reset means returning the default configurations by mechanical force. A Reset button is provided for this. It is located on the back panel of the device.

To perform a reset, you need to press and hold the button until the power indicator blinks and the router reboots. This will take approximately 8-14 seconds. If you press the button for more than half a minute, it will turn on emergency mode: Zyxel will wait for loading special file. After a restart, the settings will be reset to factory settings, all that remains is to debug the connection again.

Possible problems

The main problem that arises is the loss of authorization data when logging into the device’s web page. It happens that for some reason the user has forgotten or lost account keys and to reset the current setting, he is recommended to use the second method. It will reset the configuration network equipment, as well as information for authorization. After which it will not be difficult to find the standard data on the case.

In addition, there is a problem with the Reset button being damaged. Since it is “recessed” in the body, you have to press it with a thin, sharp object, which causes damage. In this case, the router must be taken to service center, because without a working “Reset” it is impossible to reset the authorization.

One of the most famous manufacturers communication equipment pleased his fans and consumers with a new generation 4g router. This cutting-edge development is based on new platform NDMS V2 and called zyxel keenetic. Before moving on to discussing specific issues related to, for example, setting and resetting the default password for zyxel keenetic, we will characterize new system generally. To begin with, we will present the main technical parameters of the router so that it is clear what we are talking about we're talking about basically:

The operation of the entire filling of the device is controlled Mediatek processor RT6586 with a frequency of 700 MHz.
The router has 256 MB of RAM.
For fast work File sharing networks use special firmware NDMS V2.
Built-in firewall and Torrent client.
There are connectors for connecting flash drives.
Wi-Fi module with two antennas.

In other words, it’s a pretty good configuration, and according to the developers, it’s also absolutely reliable. It is promised to download files at a speed of about 1 Gbit per second (you need to understand this correctly - not only the router, but also the provider must support this speed).

Router settings

Like others similar systems, zyxel keenetic has basic settings default. To view and edit them, you need to go to the device’s web interface at the standard address for most such devices: http://192.168.1.1. Initial settings zyxel keenetic authentication looks like this:

Login: admin
Password: 1234

You can change the router settings using the “Setup Wizard”. There are two ways to configure the device: quick setup and configuration using the web configurator. In order to start working with the device and connect to the network, the first tool is enough. The second method is more suitable for flexible router configuration.

To initially configure zyxel keenetic you may need:

Specify MAC address network card. This is not always necessary, because depends on the whims of the provider. If your provider requires a MAC address, you can find it out via command line by typing the command ipconfig /all there.

Indicate to router static IP address, if there is one. If dynamic addressing is used, then this does not need to be done and the corresponding setting parameter should be set to “Automatic”.

Some providers require a password to access the Internet - this must also be specified in the router settings.

The remaining parameter values can be accepted as default.

Why is authorization needed?

The password specified in the default settings of the router must be changed to an individual one. Otherwise, everyone (from those who are closest to you) will be able to create Wi-Fi connection to your device and use your network, eating up precious traffic. Therefore, only you and those you allow to connect to the Internet through your 4g router should know the password for zyxel keenetic.

It would seem banal? But many people forget to do this, getting carried away by experimenting with new equipment, and subsequently simply forgetting about this need. Let's assume that you did everything correctly and assigned the device New Password.

Forgetfulness in this case can play a cruel joke on you: you can forget the new password and have problems connecting to zyxel keenetic.

All modems from this manufacturer have a universal password reset procedure. We will begin to describe it.

Reset authorization

To solve the above problem, we propose step by step instructions with comments:

For the zyxel device keenetic giga ii and similar models there must be a button on the case with the inscription “Reset”. This button is intended to reset configuration parameters (including the device password) to factory settings. After clicking this button zyxel parameters keenetic giga ii should again take the values specified above in our note.
Press the “Reset” button and hold it for 10 seconds. At the same time, watch the lights on the case: they should first blink, and then all go out at once. This is a sign that our goal has been achieved and the password has been reset. Some users do not wait for the allotted time and wonder why they didn’t succeed.
Now you can go to the device’s web interface and re-specify the device parameters.

That, in fact, is all the wisdom regarding working with zyxel keenetic. You can always find more complete information about this device and its configuration on the Internet. If any other problems arise with this router, you should first read the instructions for the device, and only then start asking Google questions.