Menu
homeWindows 7

Overclocking gtx 1050 ti gigabyte card. Tests in games. Design and Layout

GIGABYTE GTX 1050 Ti 4096Mb OC for mining I already have two of them mining. I bought them at a price of 10,000 rubles in an online store, but some stores now manage to sell them for 12 thousand. If you search carefully on the Internet, you can find it for 11, but usually it’s with delivery from Moscow.

Power supply for 1050 ti without additional power

I have them working on the same farm along with a 1060, it turns out two and plus two 1060, and the power supply for them is installed. It gets the job done, but I wouldn't bet more than 4 cards.

The wires start to heat up strongly when two of a given GPU are connected to one wire at once. Sometimes cards crashed and the miner was overloaded, which was a loss of money. Especially when I removed the restrictions in Power Limit, and their electricity consumption is set to 100%, and when the voltage is set to reduced in the Afterburner settings, they still work in this mode, but I would not recommend it, so as not to have an emergency.

These cards consume about 52-56 watts at low voltage, and at standard settings 70-72 watts.

Overclocking GIGABYTE GTX 1050 Ti

The overclocking is small, in my opinion, when compared to other miners on YouTube who overclock similar GPUs by more than 15 mh/s, for me these are the maximum settings at which everything works stably. If you add more from memory to the Ethereum coin, then errors appear (broken balls).

Ethereum settings:

  • Power Limit - 75%
  • Core Clock - 0
  • Memory Clock +650
  • Fan in auto mode. Usually 30 to 50 percent works.

Temperature

As you can see, their temperature is 60 degrees, and the other is 63 degrees, since she works in the pantry, where it is quite warm. In general, all 1050 Ti video cards with two coolers cope well with cooling, even if the usual aluminum radiator no tubes.

The fans are quiet because the temperature does not rise high during operation. The coolers were never turned on at full power. So she a good option in closed system case, and for mining good temperature she has.

Hashrate

Here it stands under GPU1, this is the second card that shows 14.450 mh/s. Sometimes you get 14.5 megahashes. In Total Shares it shows 67 shares in 5.30 hours. On another farm, the same card produced 68 balls in 5 hours of miner work.

Quite a long time has passed since the first generation core, Maxwell, appeared. For all this nVidia time did not rest, and provided replacements for such models as GeForce GTX 750 and GTX 750 Ti. Although they had good speed and were energy-intensive, progress did not stop there.

GTX 1050 Ti Specifications

GPU Specifications

Technology support:

Multi-projection Yes
VR support No
Ansel Yes
Yes No
G-Sync Yes
GameStream Yes
GPU Boost 3.0
DirectX 12 API with feature level 12_1
Vulkan API Yes
OpenGL 4.5
Tire PCIe 3.0
OS support Windows 7-10, Linux, FreeBSDx86

Display support:

Power and temperature:

Manufacturers

There is no reference model of this video adapter from nVidia itself; the 1050 Ti is produced by a dozen other vendors, namely:

  1. Colorful
  2. Gainward
  3. Gigabyte
  4. Inno 3D
  5. Palit
  6. Zotac

Let's take a closer look at some of them.

MSI GeForce GTX 1050 Ti OC

The MSI video card is equipped with one fan. It is made of black plastic with white inserts. A power supply of at least 300 watts will be sufficient to operate the video card. It also produces virtually no heat, which is good news.

If we talk about the characteristics, then it has 4GB of video memory with a frequency of 7008 MHz and a 128-bit bus.

The GPU operates at 1341 MHz. Can be overclocked to 1455 MHz. But it heats up decently, and therefore if the cooling is poor, it’s better not to mess around with overclocking.

GIGABYTE GeForce GTX 1050 Ti

This brand always provides video adapters at low prices and with high performance, But not at this time. There are no questions about the design. There are two fans. But the parameters this time are not encouraging. Graphics chip GP107-300 is far from the best. The GPU operates at 1379 MHz. The video memory capacity is only 2 gigabytes, and the frequency is 7008 MHz.

There are two overclocking modes: gaming (up to 1493 MHz) and OC (up to 1518 MHz). These figures are higher than MSI's, but in games it is only slightly more powerful than its competitors.

Palit GeForce GTX 1050 Ti

It is compact and easily installed in small enclosures. It has one cooler. The body is made of black plastic. It contains the company logo. The GPU operates at 1290 MHz. Video memory has a capacity of 4 gigabytes with a frequency of up to 7000 MHz.

It consumes little energy, therefore it also emits little heat. One cooler is enough for cooling. You can overclock to 1392 MHz, the increase will be sufficient for online games.

Colorful iGame 1050 Ti

ASUS ROG Strix

The only version of the 1050 Ti above that has a 6-pin connector for additional food. This means that the card from Asus Strix is ​​suitable for overclocking.

Cooling is provided by two fans. Rear panel is covered by a metal backplate stylized as the ROG series. There is no backlight. The package is distinguished by the presence of two stickers for the body. The most interesting thing about this video card is its overclocking capabilities.

Overclocking and testing GTX 1050 Ti

Most models of this card are not equipped with a connector for additional power, the same situation is with. Such video cards do not have the ability to regulate voltage. You shouldn't expect any special results, but you can try.

The base GPU frequency increases to 1541 MHz, while the memory can operate stably at 7868 MHz.

After heavy overclocking, the chip temperature does not change much, nor does the fan speed. The frequency can exceed 1900 MHz, the average values ​​will be slightly lower. And this can be achieved without additional power, without increasing voltages and expanding energy limits.

For more powerful overclocking, models are used that have the ability to connect additional power, in addition to the 75 W coming via PCIe.

Let's consider overclocking at example ASUS ROG Strix 1050 Ti:

  1. Download and install MSI Afterburner;
  2. In the settings, we allow you to change the voltage (check the box next to “unlock voltage control” - third-party);
  • Core Voltage: +50
  • Power Limit: 130
  • Yemp. Limit: 90C
  • Core Clock: +150
  • Memory Clock: +350

Save and apply the settings. The increase in FPS in games from such overclocking will be 10-20%.

Attention: These values ​​worked on the GTX 1050 Ti version from ASUS ROG Strix, they may cause damage to your video card. We do not recommend overclocking without sufficient knowledge and experience. The data is provided for informational purposes only; if you reproduce these steps for your video card, you do so at your own peril and risk.

Benchmark tests

In the 3DMark Fire Strike Ultra and Time Spy benchmarks, it was able to score 1853 and 2370 Graphics Scores.

Tests in games

Testing took place on the following PC configuration:

  • Processor - Intel Core i5 6600;
  • ASUS Maximus VIII Extreme motherboard;
  • RAM G.Skill 16 GB;
  • SSD Plextor PX-256M6Pro;
  • Corsair AX1500i power supply;
  • operating room Windows system 10 (64 Bit);
  • Driver version nVidia GeForce: 375.95.

Tests: FPS in games in FullHD (1920×1080)

A game Ultra settings High settings
Battlefield 1 40 51
Watch Dogs 2 21 32
FarCry Primal 39 43
DOOM 2016 51 61
Fallout 4 36 43
Tom Clancy's The Division 31 36
Mafia III 18 22
GTA V 29 57
The Witcher 3: Wild Hunt 26 29
Battlefield 4 51 66

1050 or 1050 Ti - comparison in modern games

conclusions

We can say that this graphics adapter is suitable for gaming computers entry level.

The video card is based on the GP107 core. Video memory capacity 4 GB. The memory bus is 128 bits wide.

Looking at the characteristics, it is clear that the core of the GTX 1050 Ti is cut down compared to the older representatives of the line. The clock frequency is quite acceptable for video cards of this level and price range.

There are no reference models of this video adapter. But there are many affiliate models. At the start of sales, the price was 109 dollars in the USA, in Russia (before the mining boom) 8,500 rubles.

The video card is simply ideal for inexpensive, silent systems, capable of running almost any game at medium settings in FullHD.

A close acquaintance with a computer system begins when you need to assemble it yourself. It is at this moment that the average user understands all the intricacies of this process. He collects everything possible information about every component he needs. And in addition to looking for a balanced system, it is important to understand its potential.

So, everyone will sooner or later get acquainted with overclocking. Moreover, it is important to understand right away: if you need a system with the ability to increase productivity manually, you need to consider a special component for this. So, we'll take a look at overclocking the 1050 Ti.

Power increase

What is overclocking? The word is translated into English as overclocking, so this process is often called “overclocking” in Russian. The action itself is aimed at raising the frequency and voltage of one of the system components, in our case, the video card.

That is, a graphics accelerator with one frequency value goes into production, but with the theoretical possibility of increasing it. The purpose of overclocking is to increase the speed of the device and affect system performance.

Conditions

For overclocking a GTX 1050 Ti or any other video card to be successful, the increased clock rates must operate stably at the maximum value. But it is important to understand that overclocking affects the heat dissipation of the accelerator, its power consumption and noise. These parameters increase, but the working resource becomes smaller.

So that all this happens within the framework acceptable indicators, you must comply with the conditions. For example, install additional system cooling, improve power components, monitor the gradual increase in frequency.

Video card

To understand what overclocking a GTX 1050 Ti looks like, you need to consider its initial characteristics. The accelerator model appeared relatively recently. Still popular today and considered an above average performance component.

The Nvidia GTX 1050 Ti was paired with its younger brother, the GTX 1050. Both are powered by the GP107 chip. It belongs to the Pascal architecture family. These models became the successor to the previously released GTX 750/750 Ti. But new architecture made it possible to introduce older technologies into new products GTX video cards 1060/1070/1080.

The new technical process has affected the frequency potential. Video memory has become more efficient due to improved color compression. The architecture equipped the accelerators with Async Compute and DirectX version 12 technologies. The new product makes it possible to use virtual reality.

Chip

Overclocking a 1050 Ti video card directly depends on which chip is installed inside. GP107 was a continuation of GM107. It acquired two clusters and six multiprocessor SMs. Each is combined with Polymorph Engine geometry processing units.

This structure has influenced flexible resource management. Otherwise, everything remains unchanged for Pascal chips.

Characteristics

Stock frequencies indicate that overclocking the 1050 Ti is desirable. The base clock is 1290 MHz, and with Boost Clock it's 1392 MHz. The video memory inside is 4 GB, and its effective frequency has risen to 7012 MHz.

The accelerator consumes up to 75 W. This value is caused by the 14 nm process technology. Video adapters do not require additional power. Almost all modifications have the same set on the interface panel. In this case, the accelerator is often used for mini-PCs.

Since the release of this model, Nvidia has conducted a number of tests. All of them showed that the new product definitely takes the lead relative to the younger versions. For example, it is 50% faster and three times more powerful than the GTX 650. Its potential clearly allows gamers to enjoy all the new products recent years. Of course, not every project can be started with maximum quality graphics. But the player will have no restrictions in choosing current games.

Modifications

Overclocking the 1050 Ti in the reference version is not possible because the company has not made it possible to purchase ordinary user reference model. But her partners won absolute freedom. Hence this a large number of variety on the market.

Despite its performance, many consider this model to be in the budget class. Although some users might argue with this statement. After all, 11-13 thousand rubles is not so little.

To understand the potential of this model, let's look at several modifications from Asus, MSI and Gigabyte.

ASUS Expedition potential

Overclocking the 1050 Ti from ASUS Expedition could bring a lot to this modification. But it happened a little differently. The Expedition series is a simple, reliable, stable line of devices. It is not designed for experimentation. the main objective- long-term non-stop load.

Outwardly it looks simple. Black PCB is covered with a plastic casing for two slots. It has two built-in fans. The heatsink is of a simple design, but covers almost the entire board. The interface panel has HDMI, Display Port and DVI.

The operating frequency, like the reference model, is 1291 MHz. Increases by 100 MHz in Boost mode Clock. GDDR5 video memory still operates at 7012 MHz.

Testing warmed up the accelerator to 68 degrees. At the same time, the fan speed was low, and the cooling system made virtually no noise. WITH GPU technology Boost it is possible to increase the frequencies, but until the heating exceeds the permissible values.

But even this does not have a bad effect on overclocking the Nvidia 1050 Ti video card. The main obstacle was the power limitation. The average value does not rise above 1.6 GHz. Sometimes there are jumps up to 1734 MHz.

Despite the fact that the new technical process gave hope for overclocking, it was the power and frequency limitations that prevented experimentation with the model. It was not possible to increase the memory by more than 8 GHz. The processor did not show more than 1911 MHz. Last value quite flexible and has a large range, but the maximum still remains the same, and stability may decrease.

As a result, the confident frequency indicator was 1471 MHz, and the memory did not “jump” above 8008 MHz. The power limit cannot be increased, which means the increase in frequencies is only 100 MHz.

Most likely, this situation is caused by the fact that the accelerator depends on power supply, the capabilities of which are limited by the PCI-E port. If so, then most modifications will not be able to show good overclocking potential. Option one is to look for models with external power supply.

The potential of ASUS ROG Strix

Another model from ASUS that is aimed at gamers. It is believed that from this manufacturer this model- top option. Whether this is true will be shown by overclocking the GTX 1050 Ti.

The appearance of this accelerator has changed. It looks more serious, more powerful and “gamer-like”. The textolite is covered with a large plastic casing, which contains large fans. To avoid mechanical damage, back The boards were covered with a metal plate. The cooling system housing has a backlit logo that can be customized.

The interface panel has become more complete: DisplayPort, HDMI and two DVIs. The radiator of the cooling system also received a more complex design. The textolite looks expensive, and the manufacturer did not skimp on the layout at all. Electronic components High Quality meet the company standard. The chip “sits” in the center of the PCB and is powered by a four-phase converter.

The characteristics of the model have also changed. A factory overclock was carried out, which resulted in a slight increase in frequency from 1290 to 1380 MHz, and with Boost Clock - 1493 MHz. The video memory remained untouched.

Since this model from ASUS belongs to the ROG Strix Gaming line, it adjusts frequencies depending on the mode. The default is Gaming. There is a Silent option that specifies low frequency and fan speed. Mode, on the contrary, raises the previously increased figure to 1502 MHz.

Additional overclocking gave a result in which base frequencies managed to raise it to 1480 MHz. Peak Boost gave a result of 1946 MHz. There is a large increase margin up to the power limit. In simple modifications this limit is blocked, but in this model it can be increased to 57%.

In the end, it turned out that this model bypasses all modifications thanks to real Boost up to 1924 MHz and video memory up to 8.2 GHz.

MSI Potential

Another gaming modification that needed a review. Overclocking the MSI GTX 1050 Ti is worthy of attention, as it showed good results. The model belongs to the Gaming X line. Apparently that’s why it received a similar appearance. Looks attractive, powerful, reliable. The textolite is covered with a massive plastic casing with two large fans.

The cooling system is proprietary Twin Frozr VI, so even during overclocking it will not require additional assistance. The special structure of the radiator helps to direct and properly distribute the air flow.

This option also received increased frequencies from the factory. 1290 became 1354 MHz. The memory is still 7 GHz. As in previous model, there are special profiles that regulate the speed and power of the accelerator.

There is also an increased power limit. This means that even the most heavy loads do not allow energy consumption to rise to the maximum. Since overclocking of this model takes place thanks to proprietary utility, softvolt mod support opens ample opportunities this process.

The chip frequency limit is about 1.9 GHz. Real Boost operates in the range of 1898-1911 MHz. The memory turned out to be more flexible than the processor. Its frequency could be raised to 8088 MHz. At the same time, the device worked stably, without failures.

Gigabyte Potential

Overclocking the Gigabyte GTX 1050 Ti is very similar in results to the previous modification. The accelerator is equipped with two fans. The casing is massive, made in corporate style, using black and orange.

The reverse side of the PCB was covered with a metal plate. The side logos are backlit. The interface panel received as many as five connectors: one Display Port, three HDMI and one DVI.

The WindForce 2X cooling system, as always, stands out with its unusual three-section radiator design. The fans are made with a special blade structure, which increases the air flow power by 23% compared to conventional options.

The 1050 Ti is factory overclocked to 1367 MHz. Since the model is aimed at gamers, it works with different modes. All of them are regulated through the Gigabyte Xtreme Engine software.

Manual overclocking increased the frequency to 1.9 GHz. The accelerator allows you to increase the operating voltage on the core. But this directly affects stability. The memory was increased up to 8148 MHz, which turned out to be the best indicator among the reviewed modifications.

conclusions

Overclocking the 1050 Ti depends on modifications. Some models may show excellent result overclocking, others are less stable at higher speeds.

The video card model itself is not very susceptible to overclocking. The market was more flexible and potentially powerful options. But this one is characterized by stability and innate strength. Therefore, some users, choosing one of the modifications for their system, do not even resort to manually raising frequencies.

GIGABYTE Extreme Engine is a program that is used to monitor and manage operating parameters NVIDIA video cards. Despite its name, this software works with graphics adapters from any manufacturer, not just GIGABYTE. According to your capabilities, general concept and even the graphical shell is very similar to the program.

Functional

I use this utility, you can change operating frequencies graphics adapter and video memory, change the supplied voltages and limits for these same voltages, configure the operation of the cooler, and also control the parameters of the LED backlight (if the GPU has one). In addition to what Extreme Engine is powerful tool overlocking, it is also convenient software for monitoring the operation of the graphics adapter. With it, you can monitor the core temperature in real time, and also get detailed statistics about heating and cooling from the moment the PC starts.

The program has several “ready-made” operating modes. It can automatically change operating parameters graphics card with an emphasis on performance, quietness and “balance” between the two parameters mentioned above. There are also several ready-made presets for the “behavior” of the backlight.

Graphic shell

The GIGABYTE Extreme Engine interface is designed in a strict "industrial" style. The shell here is quite non-standard, but this originality does not in any way affect the ease of working with it. The interface has separate sections with standard and advanced overlocking tools, a section with cooler parameters and a section with backlight settings. But even though even beginners can use the program, we strongly do not recommend GPU overclocking without proper knowledge and experience.

Compatibility

The program only works with the latest maps NVIDIA GTX line, starting with the 9xx series. Also note that it can only be run on Windows 7 or higher.

Key Features

  • control voltages and frequencies of the graphics adapter;
  • detailed settings operating mode of the standard cooler;
  • control of backlight parameters;
  • stylish graphical shell;
  • Compatible only with the latest cards GTX series 9xx and higher;
  • ability to create settings profiles.

We recently published a build of a “people’s” gaming PC for reasonable money (within 15 thousand hryvnia). How best option video cards, Gigabyte GeForce GTX 1050 Ti (GV-N105TWF2OC-4GD) was selected. This good map for your money, equipped with high-quality heat pipe cooling, a connector for additional power, and a casing with good protection. What the Gigabyte GeForce GTX 1050 Ti, the review of which we are publishing, is capable of, read on.

The Gigabyte GeForce GTX 1050 Ti Windforce OC itself is covered on all sides with casings made of dense matte plastic. A pair of fans with 11 blades are visible at the front.

The connectors and contacts on the video card are covered with plastic covers. From below you can see the heat pipes of the cooler, as well as holes for air penetration into the cooling system.

There are also windows on top for air, you can see heat pipe(by the way, it practically does not heat up when idle). Nearby there is a 6-pin connector for additional power. In principle, this card doesn’t really need it, but given the factory overclocking, as well as the existing reserve for custom overclocking, a slot will not be superfluous.

The back of the card is also covered; the cover should prevent it from deforming under the weight of the cooler (although with such a length, the Gigabyte GeForce GTX 1050 Ti Windforce OC was not in danger of this).

IN system unit The video card occupies two expansion slots. Its length is small (23 cm), so the card should fit even in compact enclosures for MicroITX boards.

The connector for additional power is laid out conveniently; you can connect a cable to it either in a case with a lower power supply or an upper one. Even if there is a drive cage in the front of the cramped case, into which the card rests, this will not interfere with connecting the 6-pin plug. The socket is not recessed tightly into the plastic, so an 8-pin connector fits into it without any problems (as in the illustration above).

Specifications Gigabyte GeForce GTX 1050 Ti

Gigabyte GeForce GTX 1050 Ti Windforce OC is based on regular processor GP107 microarchitecture Nvidia Pascal, produced using the 14 nm process technology. It consists of 3.3 billion transistors, and the core area is 132 mm2.

Some parameters are slightly different from the reference ones. First of all, this concerns the additional power connector: standard version he's not there. Clock speeds video cards are increased in Boost mode to 1443 MHz.

Configuration GPU includes 768 unified shader units, 32 rendering units and 48 texturing units. The memory capacity is 4 GB, it is equipped with Samsung chips and operates at a frequency of 1752 MHz (7008 MHz effective QDR frequency).

Tests of Gigabyte GeForce GTX 1050 Ti in some games

The Gigabyte GeForce GTX 1050 Ti Windforce OC review is intended not only to determine the capabilities of the video card in games, but also to answer popular question: will the Pentium G4400 reveal the GeForce GTX 1050 Ti. After all, in test configuration it was he who was used. This CPU is one of the budget Intel solutions, which are in demand due to their low price, with a slight lag behind the Intel Core i3.

Test configuration:

  • CPU: Intel Pentium G4400, 2 cores, 3.3 GHz
  • Motherboard: Asus H110M-K
  • RAM: G Skill F4-2400C15-8GNT 8 GB
  • SSD drive: Transcend TS128G SSD370S (128 GB, SATA-III)
  • HDD drive: WD WDC WD30EZRX-00DC0B0 (3 TB, SATA-III)
  • Power unit: Zalmam ZM500-TX, 500 W
  • Frame: GameMax H601
  • Monitor: Acer R1 R231 23″, 1920x1080, 60 Hz

To test Gigabyte GeForce GTX 1050 Ti Windforce OC we used popular games. The main goal of the tests is not to achieve some indicators suitable for comparison under reference conditions (as those who systematically review video cards do), but to find out what a simple gamer can expect from this video card. The second question is whether it will reveal Pentium processor G4400 potential GeForce GTX 1050 Ti.

Tests were carried out in the following games:

  • The Witcher 3: Wild Hunt
  • Sniper Elite 3
  • Metro: Last Light
  • GTA V
  • World of Tanks
  • World of Warships
  • Fallout 4
  • Battlefield 1

To measure performance we used Fraps program, which can take screenshots, write videos and measure average and minimum FPS. Also, to monitor the iron load, the MSI Afterburner application was used, which displays the load status in the OED. Tests were carried out first on the most maximum settings(all sliders to maximum, anti-aliasing and others visual improvements- Same). If the performance was not sufficient for a comfortable game, the settings were reduced until we achieved stable value FPS

The Witcher 3: Wild Hunt

Looking ahead, it’s worth saying that The Witcher turned out to be the most difficult game for the Gigabyte GeForce GTX 1050 Ti Windforce OC and Pentium G4400 combination. At the highest graphics settings, he was able to produce a theoretically acceptable FPS. Minimum value was 24 frames per second, average - 34. The video card was loaded at 100%. However, it was not comfortable to play; the processor was constantly loaded at 100%, and the game froze. Lowering the settings and disabling Nvidia HairWorks did nothing, performance remained the same. This means that in The Witcher 3 the Pentium G4400 does not reveal the GTX 1050 Ti.

Sniper Elite 3


Sniper Elite 3 turned out to be less demanding on hardware. The processor power was enough for her: even at the highest settings (with anti-aliasing), the processor was not loaded to the limit, while the video card had enough work, and it produced an average of more than 30 FPS. Disabling supersampling had a very positive effect on performance. GeForce GTX 1050 Ti was able to produce consistently high FPS: minimum 80, and average 103 frames per second.

Metro: Last Light

Metro Last Light is not a very new toy, but even by today's standards it is quite demanding. It has a GeForce GTX 1050 Ti, when turning on maximum settings and SSAA anti-aliasing, it was almost impossible to play. FPS almost never rose above 20, which is very low. The minimum threshold we saw was 13, the average was 18 FPS.

Disabling antialiasing made a huge difference general position. At maximum settings, but without SSAA, the minimum FPS was 30, and the average was 50.

Reduce graphics quality to SSAA 0.5x allows you to play comfortably even for those for whom 50 FPS is not enough. In this mode The frame rate does not drop below 51, and on average the video card is capable of delivering 70 FPS.

GTA V

GTA V is a rather contradictory game in terms of requirements. On the one hand, it is well optimized and adapts to any hardware, delivering a tolerable frame rate. On the other hand, its requirements are rather large, and there is processor dependence. Including everyone possible settings to the maximum made it possible to obtain good FPS. Its minimum value was 31, and the average was 35 frames per second.

However, not everything turned out to be so simple: in the swamps, near military base, due to the abundance of grass and water, the GeForce GTX 1050 Ti showed that it had a hard time. In this place, the FPS indicator did not rise above 30, and sometimes dropped to 21-23 frames per second. Playing with the graphics settings did not give any noticeable results, the average FPS was about 40. But as soon as the city population and population diversity were reduced, performance increased significantly.


As a result, we can state: in GTA V, the Pentium G4400 processor will open the GTX 1050 Ti if 30 FPS is enough. You may have to reduce something in the settings, but even without this there are no wild brakes. But if you need stable 60+, you should look for a more powerful processor.