Menu
homePrograms

Login to the tp link router settings. Enter the settings of TP-Link TL-WR841N. Dynamic IP - automatic network settings of the provider via DHCP

Wireless networks - an opportunity convenient connection to the Internet without additional cable installation. A router (or router) is a compact substation, the main task of which is to transmit the signal received from the network to connected devices.

Unfortunately, even modern technologies malfunctions. But even when your device is working properly, you may need to, for example, change your password or name wireless network. In all of the above cases, you will need to go to the router settings and make certain actions. The control panel of the TP link router is located at 192.168.1.1 or 192.168.0.1.

TP link settings: using a personal computer

  • Using a network cable, establish a connection to the computer router. To do this, connect one end of the cord to personal device, and the other to the router. To connect to the router, use any of the LAN connectors (outputs yellow color).
  • Specify the address specifically for your router. To do this, turn the device over and back side On the left, find the IP line and look at the subsequent combination of numbers. In some device models, instead of the usual numbers, the domain address tplinklogin.net or tplinkwifi.net is written. Then remember this address.
  • Open any browser on your PC and enter the IP address (or domain) data in the search bar.
  • Press Enter.
  • A window will appear in which you must enter your username and password. Again, look at this information on your router. It is listed below the IP address (or domain). Standard data “admin” and “admin”. If you have previously changed your login information for the router settings, then enter the already changed information.
  • Press Enter (or “Login”) again.
  • The required settings will appear in front of you.

TP link settings: use wireless Wi-Fi network

This method will help if you need to get into the control panel of the router, but there is neither a power cord nor a computer. Important Note When working with device settings via Wi-Fi, do not update software, otherwise you risk breaking the device. The router firmware is carried out only using a cable connection.

  • On the back of the router you will find the connection information IP address, login and password.
  • Next, launch the browser on any gadget (phone, tablet, laptop) associated with Wi-Fi router connection.
  • Enter IP addresses (or domain address) into the search bar.
  • You are making the transition.
  • In the window that appears, fill in the “Login” and “Password” fields. To do this, enter the appropriate data for your router (standard “admin” and “admin”).
  • Click “Login”.
  • If everything was done correctly, a page of the required settings will open in front of you.


TP link settings: possible problems

In some cases, performing the steps listed above does not bring the desired result. What are possible reasons failures?

It is not possible to open the page

After specifying the IP address and attempting to navigate, a message appears on the screen that the browser cannot display the page. In this case it is necessary:

  • Check the Internet connection. In the status bar on your computer (or mobile device) the Internet connection icon should be lit.
  • Check the network settings on the PC or other gadget with which you are trying to access the router settings.
  • When installing wired connection check the integrity of the cable. If possible, try connecting via Wi-Fi.
  • If your computer has active and Wi-Fi connection and connection by power cord, disable one of the communication methods.
  • It should not be ruled out possible breakdown the router itself.
  • If the above steps did not give the desired result, try resetting the router settings to factory settings (press and hold Reset button on the back of the router and hold it in this position for about 10 seconds).


Incorrect login and password

An error may also occur at the stage of entering your login and password (or entering this information does not lead to any further events). In this case:

  • Sort through different variants to enter. If you have changed your data, enter it already new information, not standard data. Leave both fields blank and try to login. Leave the “Password” line blank or try entering the combination 1234 in it.
  • Change your browser.
  • If the steps are unsuccessful, you will most likely have to perform a factory reset (as described above).


When changing your password, if you need to log in to a wireless, Wi-Fi, network, or in order to see it, you will need the router settings. In this article we will tell you how to enter the configuration settings using the examples of several of the most famous routers.
Also, using the router control panel, you can make a number of settings: from renaming the access point to parameters and status wireless internet connection.

Routers TP-Link

Routers Chinese company TP-Link have similar settings, so the guide you will see below is universal. If you have one of these router models, go to the settings by performing five steps in sequence:

D-Link routers

Routers from a global manufacturer network equipment, the Chinese company D-Link, are easy to set up. That is why these routers are so popular and in demand for home use. Also, devices of this brand are produced with support for several communication methods. So, to set up a D-Link router, use one of two methods:

Method 1 Find the disk in the box with the router and follow the instructions.

Method 2Use the router settings panel.

To launch the settings panel D-Link router You will need a working browser. Open it and follow four steps in sequence:

Asus routers

Network equipment from Asus is popular, and for wireless routers characteristic high performance And optimal prices. Routers developed by this Chinese manufacturer, it is recommended to connect directly to the computer, unlike others that connect via a wireless, Wi-Fi, connection.

How to connect Asus router directly to the computer, shown in the diagram:


WAN - provider network cable, it is marked yellow. The router is connected to personal computer using the LAN port.

After connection Asus router with a computer, you need to configure the network so that it receives an IP address in automatic mode. All settings are made in the network control center. Go into it and click on the network that belongs to the router. You will see the TCP/IP protocol properties settings window.

In this window, you need to check the corresponding box, which makes it possible to receive an address automatically when connecting.


Launch your browser, the one you use for surfing, and search bar write local address. A window will open where you need to specify your login and password for authorization. For routers from Asus, login and password admin.


Do not launch the router settings panel until you have connected the router to your computer. If the two devices are not connected, you will not receive permission to log into the control panel. You will see a browser notification that it is impossible to connect to the remote server.

Zyxel Keenetic routers

Taiwanese ZyXEL company is the world's leading manufacturer of network equipment. By technical parameters routers Zyxel Keenetic there are no equals, but the price of these devices matches. For the router to work as it should, it must be configured correctly. And all settings are made in the device control panel.

Follow the three steps below in sequence:

Routers Rostelecom

Routers are produced under the Rostelecom brand, a domestic telecommunications company. They produce them well-known companies, for example, one of them is Sagemcom. This company produces the majority (almost 82%) of routers under the Rostelecom brand for the domestic market. If you have such a device, you can enter its settings by following three steps in succession:

If you can't connect to the router's web address

If you entered the local address of the router, for example, 192.168.1.1, but the control panel did not open, and the browser issued a warning about the server being unavailable, the device needs additional configuration.


You were unable to connect for two reasons:

Connect two devices - a computer and a router - correctly, go to the PC taskbar and select the active connections window:


The PC and router must be connected to each other. If you see the status “No Internet connection”, you need correct settings. Follow these six steps:

Determining the router's IP address

In most cases, the router settings panel is available at two addresses: 192.168.0.1 or 192.168.1.1. The router and computer are connected correctly, the Internet is available, but the router settings panel does not appear. The reason may be that the device has a different web address. Go to connection settings to see it.

To do this, open Network Sharing Center and shared access. Find the connection icon with local network. View her “State” by clicking the mouse.

A window with “Information” will open. It contains network connection information. You need the "Default Gateway IP" item. Copy the numbers and enter them into the address bar, then press Enter.

Setting up a connection address manually

Your network may not be able to obtain the address automatically. Receiving IP can be configured in manual mode. Go to Internet Protocol 4 (TCP/IPv4) properties.

Uncheck automatic receipt IP addresses, DNS servers and configure it manually by checking two items: “Use IP address”, “Use DNS server”

If you have a router from TP-Link, enter the following information:


If you have a router from Asus or Rostelecom, provide this information:

Resetting the router settings

You can't log in to your browser because you don't remember the password for your router settings panel? The only way out of the situation is to return the device to its previous factory settings.

When you reset the settings, all parameters will be default, which means you can use the standard password for authorization. This password is located on the router itself or in the manual.

There is nothing complicated about resetting the settings. On the back of the router there is special button. Use a suitable object to click on it. The duration of the clamping is about 9-14 seconds.


Immediately after you release the button, everything custom settings will be deleted. Now open your browser, enter the router address and log in with standard data. We've shown you all the ways you can open your router's settings panel and change its settings as needed.

LDS.ua Network User's Guide

Setting up TP-link - Option 2

1. Preliminary data.

Before directly connecting and setting up the router, you must go to your Personal Account and write down your current "MAC address".

Please note that the MAC address can only contain the numbers 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 and the letters of the Latin alphabet a, b, c, d, e, f

2. Correct connection.

There are five connectors on the back of the router. Four of them are signed LAN, one is WAN (Internet). For proper operation device, you need to connect the Internet cable to WAN port, and use another wire to connect one of the LAN ports to the connector network card Your computer from which subsequent configuration will be carried out.

3. Enter the router settings.

We launch any browser where in address bar enter http://192.168.1.1 (possibly http://192.168.0.1) and press the key "Enter". In the window that appears, in the fields "User Name" And "Password" enter admin and press the key "OK"

4. Connection setup.

You must select a section "Network", Further "WAN".

In the window that opens, fill in the fields:

WAN Connection Type: PPPoE/Russia PPPoE;

User Name: Your LDS user login;

Password: Your password;

WAN Connection mode: Check the Connect Automatically checkbox.


And finally, save the settings "Save".

After that we go to "MAS Clone" and press the button "Clone MAC Address» .

If an address appears in the MAC Address field that does not match what you wrote down from your statistics, correct it manually.

We complete the setup with the button "Save".

5. Configuring Wi-Fi connection parameters.

Now let's set up a WiFi connection. Select the “Wireless” item, and then click the “Wireless Settings” button.


Fill in the fields:

Wireless Network Name: Let's come up with a name for the WiFi network;

Region: Ukraine;

Channel: Auto;

And press the button "Save". Then we move on to "Wireless Security"


Fill in the fields:

Checkbox WPA/WPA2 - Personal

Version: Automatic

Encryption: AES

PSK Password: Wi-Fi password

And to complete the settings, press the button "Save".

6.Software download.

Updating the router software is not a mandatory procedure for setting it up, but it is advisable to perform this procedure, because otherwise, correct operation is not guaranteed. Updating the software can solve the problems of previous software versions and improve the current performance of the device.

Before you start updating, you need to determine the hardware version (revision) of the router and download the software from the manufacturer’s website. To do this, look at the bottom of the router case, where we look for the line H/W Ver.:


Go to https://www.tp-link.com/ru/download-center.html. and select the model of your router. In the page that opens, select the hardware version of the router (Ver.) in accordance with the revision of your router.

If for this model there is current version software, the item will appear "Firmware", in the section of which you can download the archive we are interested in.


IN in this example the software file will be archived (zip). After extracting from the archive, we get a file with the extension bin.

7.Software update.

We log in to manage the router, in the window that opens, go to the section "System Tools", then click "Firmware Upgrade". In a new window using a copy "review" we find the file with the software that was previously downloaded, and then click "Upgrade". After updating the software, the router will automatically reboot.

Do not unplug the power cord during the update.

Since there is already a description of the steps to enter the settings of most common routers, even general instructions when logging into the control panel, it makes sense not to ignore it by writing separate instructions for both high-quality and in-demand TP-Link devices.

A significant advantage of devices from this company is that the process of gaining access to the control panel is no more difficult than on other routers, and is almost identical for any model of routers from this company (TL-WR841N, TL-WR741N, TL-WR940N, etc. .).

You shouldn’t be surprised that after purchasing a router, to install it yourself, you need to log into the settings panel. Thanks to the article from this site, it is unlikely that you will encounter difficulties in setting up routers. Indeed, despite the use of the services of a master when initial setup, when you start using the router, you will probably need to make changes to some of them: changing the Wi-Fi password, recovering a forgotten password I, firmware update. Constantly turning to the master will not add convenience, and family budget won't save. After all, you can handle everything yourself, and if you have any difficulties, turn to the site for help.

Getting access to the TP-Link settings panel

To enter the settings you need to do the following:

  • Let's connect to Wi-Fi router. This can be done either through Wi-Fi network, or using a network cable. Although it is possible to enter the settings system both through a smartphone and a tablet, it is still recommended to use a laptop or PC.
  • Using any web browser, depending on the type of router, go to one of the addresses:, or. You can see it on the bottom of the device.
  • When prompted for a login and password, indicate “ admin"or your own information, if you managed to change it.
  • You have entered the settings panel.

Detailed description of connecting to the device with illustrations

We use Wi-Fi, a diagram of how to connect to it can be found here, or a cable to connect to the router. Since your device has just been purchased, the name of the wireless network should be typical. Something like "TP-LINK_0919".

Also for connecting to a router (in the yellow LAN slot) and to a laptop or PC, in network adapter, you can use the cable included with the router, as shown in the photo below:

Then you need to launch the web browser of your choice on your PC. TP-Link has more than one IP option for logging into the settings system; in the case of TP-LINK, to log into the control panel you need to write admin | admin (standard in old models addresses are used 192.168.1.1 or 192.168.0.1) . You can find it on a tag glued to the bottom of the wall of the device. This label displays information about the IP, template password and login. Knowing this information will be beneficial in the future.

Then we jump to the address entered in the web search engine. In the window that opens, fill in the standard login and password - “ admin". If the template data has been changed, you must enter the current ones. If you need to use a standardized password and username, for example, you can't remember them, you may need to reset your router.

After completing the steps described above, the control panel will appear.

Thus, you enter the router settings system. In cases where I can't access the router settings, it is worth resorting to the help of this article, which describes ways to solve the most common difficulties when they arise.

Leave feedback, ask questions and give advice! Good luck!

TP-LINK is one of the leading manufacturers of network equipment. We will present detailed information, how to connect or reconfigure a TP-Link router. The procedure for connecting the device, setting up a wired and wireless network, changing the password and updating the firmware will be discussed. The information obtained will allow you to configure without problems home network in TP-Link routers.

What data is needed to connect the router?

To change the parameters of the router itself, you will need two things: a browser and a password with an access login. The latest data can be found on the label attached to the device body. As a rule, the standard login and password are the English word admin.

To use the Internet you will also need authorization data, which you must obtain from your provider. However, they must be specified in the service agreement. You must enter them in the router or specialized program, if provided by the provider. Be sure to find out the connection type (PPPoE, L2TP, PPTP and others) for correct settings. When using a dynamic IP, you need to know your IP address, subnet mask and the like. If all these parameters are already in hand, you can connect to TP-Link.

How to connect a device to a network, PC or laptop

The procedure does not cause any great difficulties, and is performed for 5-10 minutes. Follow the steps in the following instructions one by one:


Models with Wi-Fi can be configured over the air. This is relevant if you are not able to connect the router to your computer via LAN. This completes the manipulation of the wires. The process then continues in the web interface.

Login to the web interface

Manipulations with the modem are performed only in the web interface. You can access it from your computer when connected network cable or via WiFi on wireless model. Attention! You can use the interface at any time, even when the Internet is down. To log in, follow the instructions below:

Router settings

Let's move on to the most interesting part - changing the router parameters. The main window contains more than 10 different sections. Most of them are not needed by the average user. Internet activation occurs in a maximum of two sections. Next, we will tell you in detail how to configure a TP-Link router, about creating wired connection, setting up Wi-Fi, changing the login password and other useful things.

Connecting to a wired network

The router has a quick setup feature. Beginners are recommended to use this section. Click "Next" and follow the installer prompts:


When setting up other types of connections, fields for entering your login and password will appear. Here you need to enter the data provided by the provider. The user can change the settings in the “Network” section. IN selected models“TP Link” next to the choice of connection type there is a “Define” button that will help you find out your type. Based on the WAN, the corresponding characteristics are already configured.

For example, to use PPPoE, fields for login/password and parameters specific to PPPoE already appear in the window.

Connect via wireless network

For devices with a Wi-Fi module, you will also have to configure wireless connection. This can be done with quick setup(the penultimate paragraph requires the introduction of all important parameters).

Let's figure out what Wi-Fi settings at TP-Link router should be changed. Broadcasting should be set to “on”. The SSID or network name is what will appear on other devices when searching. Specify your region, mixed mode. Leave the channel and its width automatically. Advanced users can choose it themselves, taking into account occupied channels by neighboring routers. If you want to set a password for the access point, select the WPA2-PSK security type. Finally, all that remains is to enter the password for wireless point networks. Click the “Next” button and complete the process.

Similar settings are found in the “Wireless Mode” section. To change the SSID or channel parameters, select the “Settings” sub-item wireless mode" You can change the password in the “Wireless Security” section. When making any changes, do not forget to click the “Save” button. If the selected settings have not changed, reboot the device.

Through these menu items, routers from the manufacturer TP-Link are configured.

Changing the password for logging into the web interface

All owners are recommended to change standard password and login from the router. This is due to the fact that an attacker, if the Wi-Fi password is missing or has been hacked, will be able to enter the modem settings and “have fun”. Eliminating the problems created will not be difficult, but it is better to avoid this. The interface allows you to quickly and conveniently change input data:


If you have forgotten your login information, perform a factory reset.

Advanced Settings

The router has a mass additional functions, which expand its capabilities. Consider some of the advanced settings:

  • Guest network. Allows you to configure public guest network, limit incoming/outgoing traffic or operating time.
  • Changing addressing. It allows you to set static IP addresses or use DHCP.
  • Forwarding – setting up virtual addresses, web telephony, conferences and the like.
  • Functions parental controls. Limiting Internet access time or specific resources.
  • Manually setting a routing table (for specialists).
  • Binding MAC addresses to specific IPs.

You can find out more about how to configure specific functions of your TP-Link router in the instruction manual.

VPN

This technology allows you to hide information from prying eyes. Encryption is performed, so even your provider will not be able to track your visits. However, only those models that have a pre-installed VPN server can use VPN. You can make adjustments using next steps(for English firmware).