Http 192.168 1.254 password login admin. Problems logging into the router's personal account. Login to settings

The Rostelecom company provides its subscribers with various equipment for rent, including routers. The company is not involved in the production of equipment, but in world practice a scheme is widely used in which the manufacturer supplies the provider with equipment without a logo, and the provider already applies his own. Rostelecom does the same (it cooperates with Huawei companies, zte, eltex, sagemcom, etc.), which means that clients may have different models. In this article we will look at universal methods gaining access to the router settings.

How to enter the router settings

So, you rented or bought a router, came home and want to set up the Internet or make some other settings (for example). To do this, you need to open the package, connect power and a cable to the router, but not the one that comes into your apartment from the entrance, but the one that will connect the router to a computer or laptop. Connect the other end of the cable to your turned on computer. For most router models, the admin panel is available at 192.168.1.1 or 192.168.0.1 . Type one of them into the address bar of your browser and press enter.

After this, a window for entering your login and password should appear in front of you.

The username and password for logging in are indicated in the operating instructions for the router, but if you could not find such information there, then try the following combinations:

If one of the combinations matches, then a page with available settings router.

If these options do not work, then you need to reset the settings to factory settings. To do this, find on the back wall Reset button and press it for a few seconds while the router is turned on.

Basic settings of the Rostelecom router

The first tab of the router settings displays summary information about the current state of the device. We don't make any settings here.

The second tab is where you configure your Internet connection. Select the interface you need (in our case PPPoE/VPN) and click on the “add connection” button.

In the window that opens, you need to select a protocol, come up with a name for the connection, enter a username and password to access the Internet ( this information must be in your contract), as well as the server address. Leave the remaining items in the "auto" state.

If you have several computers at home, then next tab you can assign each device its own IP address on your home network.

The next tab is responsible for Wi-Fi setup. Here you need to set the name of your network, select the encryption type and come up with a password.

The manufacturer regularly releases firmware updates, which correct errors found by users and add to the device new functionality. That's why it's worth checking regularly for availability. available updates. Go to the settings tab and find the "update" item there. The screen will display the current firmware version and the version available for update. All you have to do is click on the “install” button.

As you can see, with minimal knowledge you can produce self-configuration router without calling a company specialist to your home. Ask questions in the comments and we will help you, but in the meantime we recommend watching a video on this topic.

Many users have problems logging into the modem setup page, connecting to the Internet, or Wi-Fi update router.

In particular, difficulties may arise due to the fact that some people simply do not know where to enter this address: http://192.168.1.1 (if you CAN’T log in, read the entire article), which is where the modem is actually configured. It's very simple, you need to enter this address in address bar any Internet browser, such as Opera, Firefox, Internet Explorer or Google Chrome.

Also, some people enter everything correctly and in the right place, but this page is not available for some reason. It says something like: “Unable to connect or establish a connection with the server.” Or it writes: “ ” or “connection is limited or absent.”

This is the error you may get when logging in to IP address 192.168.1.1 (login and password admin admin) Mozilla browser Firefox:

The error literally reads: “The connection timed out. Timed out waiting for a response from server 192.168.1.1. The site may be temporarily unavailable or overloaded with requests. Wait a while and try again.

If you cannot load any page, check your Internet connection settings. If your computer or network is secure firewall or a proxy server - make sure Firefox is allowed to access the Internet." And he asks you to click on the “Try again” button.

It looks like the problem appears when logging in and in the Google Chrome Internet browser:

The text is: “Cannot access the site. Timed out waiting for response from site 192.168.1.1. Try the following: Check your Internet connection. Check your proxy and firewall settings. "ERR_CONNECTION_TIMED_OUT". And it suggests “Reload page”.

Another problem may arise when entering a login and password to log in (standard login: admin or administrator, the password is either the same as the login or we leave the field empty, in some models the password may be 1234). For example, the login and password for logging into the admin panel of the modem can be changed from standard to other, custom ones, and then you will also not be able to log into the settings site.

Problems setting up the Internet, go to the router http://192.168.1.1 login to admin admin.

First, make sure the modem is turned on. After turning on the modem, if you are setting up the modem for the first time or have just purchased it, as well as to reset the settings to factory/standard settings, take a paperclip or toothpick and press the small “Reset” button on the case (if you don’t find it, just skip this step ).

Second - connect network cable(Ethernet) from the device to the network card on the back of the computer case. At this stage you also need to make sure your network card. In the network connection settings (in Windows 7, “Control Panel” - “Network” and “Internet” - “Network Connections”, or “Network and Sharing Center” - “Change adapter settings”) on the “Local Area Connection” icon There should not be a cross or the words “network cable not connected”. Here, click right click on this icon and if the network connection is not working, click Enable.

Third - setup network connection(you can try skipping this step and moving on to the next one, if you can’t connect, then go back to it). To successfully connect to the address 192.168.1.1 admin admin, both the computer and the modem must be on the same subnet.

To do this, in the network connection settings (“Connect via local network", as in the previous step) right-click on the icon, go to "Properties", click on TCP/IP v.4 settings. If you have the “Obtain an IP address automatically” checkbox, change it to “Use the following address” ( Manual installation) and enter, for example, 192.168.1.115 and save the settings.

Fourth - open any browser: Opera, Firefox, IE, Chrome. We enter in the address bar where you usually enter the names of sites, http://192.168.1.1. If everything is configured correctly, a window for entering your login and password should appear. For almost all device models, the login/password pair will be: admin/admin (variations admin/empty field, administrator/administrator, admin/1234, administrator/empty field).

If you were unable to access 192.168.l.l under one of these logins, then you need to reset the settings to standard, as in the first step. If this does not help, read the instructions for your device; perhaps you have a different login and password combination for logging in.

Setting up a router, Wi-Fi, access point, external antenna and other network equipment.

Other device variations are possible (routers, Wi-Fi, access points, external antennas, signal amplifiers and more network hardware) and the following IP addresses, for example 192.168.0.1 (for Dlink), 192.168.0.50, 192.168.2.2, 192.168.2.1, 192.168.1.254, 192.168.1.2, etc. The method of connecting to these devices is often similar. This approach can also be used to configure devices various manufacturers, such as D-link, Zyxel, TP-link, etc.

In conclusion, we can advise you - carefully study the instructions for your device, it should be detailed and in Russian, describing all the steps for connecting and setting it up. We are waiting for your questions in the comments.

On every smart network device - be it managed switch or WiFi router - you need to configure access authorization. This is an axiom that cannot be deviated from. But even here there are some peculiarities and nuances. Let's look at this in more detail.

When we try to access the router’s web interface via http://192.168.1.1, we get to this authorization request, i.e. it asks us for a login password:

For 90% of all home network devices, the default login and password are 192.168.1.1: admin / admin. These include Asus, D-Link, TP-Link, Upvel, Sagemcom. But, as I already said, you can’t log into the router using the admin login and admin password on all devices. The exception is routers from Zyxel (password: 1234), Acorp (you need to type Admin with capital letter) and some models Chinese devices from ZTE (Promsvyaz) and Huawei.

What is the default password?!

If you did not change the password after setting up the device from the default one to your own, then it is very easy to find out the access details. We take the router in our hands and turn the bottom side towards us (if the device is made in a housing with vertical arrangement, then look at the back of the case). There should be a sticker like this:

It just shows the device’s IP address, login and password.

What should I do if I forgot my login password or admin/admin is not suitable and the message "GoAhead"?!

There are two options. The first is to remember or, if you didn’t set up your modem yourself, look for someone who did it and find out the password from him. Yes, this is not a joke. Therefore, the second option is to use the "Reset" button to reset the device configuration to factory values.

Press the button for 10-15 seconds until all the indicators blink at once and then go out. The router will reboot and return with a pristinely clean config, the same as you bought it. Now we need to completely reconfigure it.

How to set your admin password?!

To change or set your own password for access to configuration parameters for each network device you need to make your own sequence of actions. Now I will give examples for the most common models.

ASUS

On Asus devices, after logging into the web interface, you need to select the section in the menu on the left Additional settings , and in it - a subsection Administration. We are interested in the tab System. This is what it looks like on older versions of Asus R-G32 and RT-N10 firmware:

Here we find the “Change system password” field and enter your own, instead of the default admin. Click on the “Apply” button.

On new versions Asus firmware Wireless Router on models RT-N10U, RT-N12 D1, which is made in black colors, everything is logically located in the same places:

Don't forget to click the "Apply" button to save the configuration settings.

TP-Link

The situation with devices from this manufacturer is generally interesting. On the same router model - for example, tl-wr740n or tl-wr741nd - depending on the firmware, the IP address can be either 192.168.1.1 or 192.168.0.1.
In order to change the password for admin, you need to go to the section in the device menu System Tools >>> Password:

Enter the username: admin, old, and then New Password. Click the "Save" button.

If your interface is in English, then the corresponding section is System Tools >>> Password:

In the "Old Password" field enter Old Password, and in "New Password" and "Confirm New Password" - new. Save the changes by clicking "Save".

Zyxel

Homemade Zyxel routers the Keenetic and Keenetic II families - Start, 4G, Lite II, Omni, Viva, Giga II, Ultra - are some of the most popular SOHO equipment on the market. On the first version you had to go to the section System >>> Password:

But for the second version of the firmware you must also select the section below System, tab Users and click on the admin user to change the login password to http://192.168.1.1:80 instead of the standard “1234”:

Here, by the way, you can set access rights. Click on Save and close the page.

D-Link

WITH D-Link routers It's not that simple either. Most of them have the address 192.168.0.1, and only some versions of the DSL-2640U, DIR-320 and DIR-620 use 192.168.1.1. Although the steps to change the password instead of admin are the same in both cases.
First, let's go to advanced settings:

Then select the section System >>> Administrator password:

Here we enter the new login password twice and click on “Save”. After this, do not forget to select the “Save and Reload” menu item in the upper right corner of the web interface.

Linksys, Cisco and DD-WRT

These SOHO-level devices use an almost identical Interface. Actually DD-WRT firmware originally used on Linksys. And only after that, in a modified version, it became available for many other routers.

Hello, more and more often in the comments I receive the same question “I can’t access the router settings at https://192.168.1.1/”. Which was very strange for me since I had never encountered such a problem when setting up a router. Therefore, I decided to ask in more detail the people who left a comment about the entire path they took when trying to enter Personal Area. And it seems to me that he identified all the problems that could arise. I will try to explain them all in as much detail as possible.

Input errors when logging in to 192.168.1.1

It will probably seem to you that I was too meticulous in approaching those. BUT in fact, as statistics show, the main problem with logging into an address is incorrectly entering it into the address bar. Therefore, I advise you to pay close attention to this, I myself sometimes put an extra number at the end (example: 192 168 1 1 1), or I write the address twice at the beginning (example: 192 192 168 1 1). Of course, I will quickly correct this, but as you can see, even experienced people make mistakes. It is also a common mistake to confuse a comma with a period. There is only one conclusion: be careful.

Connecting the router to the computer

At initial setup router or after bringing the router, from inexperienced user, there could be a problem with the incorrect connection of the wires to the router. It can sometimes confuse the Internet port with the LAN (local area network) port. So remember the basic rules for any router: Each router has 2 types of ports, this is one port to which the Internet provider wire is connected - which can be called on the router as “INTERNET”, “WAN”, it will also be designated special color. The second type of ports can be several; they are used to connect to the router various devices– most often this port is designated on the router as “LAN”, and is highlighted in a color different from the “Internet” port. Detailed diagram. Let's now look at how to find out that everything is fine with the connection.

As you can see in the picture, the Internet port is dedicated blue, and the “LAN” port is highlighted yellow. Having connected a laptop or computer to the router, the “LAN” light on one of the ports should blink on the router, in this case 1st. This will mean that the router has successfully connected to the computer’s network card.

If the light does not blink, this may mean that the computer's network card is not turned on. You need to enable it. You can do this by logging into your operating system and turn on the network.

For Windows XP

Start - Control Panel - find “Network Connections”.
Connect via local network, right-click and select “Enable”.

For Windows 7.8

In the lower right corner (near the clock) there will be a network icon in the form of a monitor, click on it and select “Network and Sharing Center”.
In the window that opens, in the left column, select “Change adapter settings.”
Connect via local network or Ethernet, right-click and select “Enable”.

After this, the light on the router should blink and you can try to log in to 192.168.1.1. If that doesn't work, read on.

192.168.1.1 is not the address of your router

It often happens that the router address is not what you enter, or it was changed during the router setup. Therefore, by entering the address that we are discussing, you have nothing left to do. Therefore you should. If we describe the article the link to which I gave earlier in brief, then you need to go to network settings OS and properties network card look at the address she received. And the address against which the name contains the words “Gateway” will be the address of the router.

We enter it and proceed to the settings. If it is not there, read on.

The device does not receive an IP address automatically.

As you probably understood from the title, it happens that the router does not transfer the IP address to your computer. At the same time, in the network information, the IP address looks something like this: 169.xxx.xxx.xxx, where x is any number.

This may mean that the DHCP protocol is disabled in the router, or the DHCP service is disabled in Windows itself. To solve this problem, you can try to resume the service, but there is a faster and less the hard way. You just need to register static settings ip addresses. The settings should be like this:

Where to go to make settings is well described in.

Once you have made the settings, you should be able to easily enter the router settings.
.

192 168 1 1 Login and Password admin are not suitable

It happens that everything is in order and when you type the address of your router in the address bar of your browser, the authorization window appears. Where you are asked to enter your login and password, on most routers the default login and password is admin. But what to do if it doesn’t fit, you can refer to the table of logins and passwords by default, it will be . If standard password and the login doesn’t work, it means it has been changed, and in this case, to log into your router’s personal account, you will have to reset the router’s settings to standard. This can be done by pressing the “Reset” button and holding it for a while. After this, the standard login and password will work, but the router will need to be reconfigured for your network. On the pages of my website you can find detailed description settings and where the reset button is located on your router.

Blocking an address by an antivirus firewall

Problem with 192.168.1.1 address being blocked by firewall or antivirus program, is very rare. It can be resolved very simply by temporarily disabling your antivirus and pausing the firewall.

Browser infected with virus

This problem is also rare, but thanks to the advent of the ability to insert extensions in browsers, it is gaining momentum. Since some virus extensions in the browser can redirect the address. The long-term solution to this problem is to check your browser for viruses, disable the entire extension, etc. I advise you to just use a different browser. Also, when setting up your router, disconnect the Internet from it, the virus will not be active and you will be able to log into your router without any problems.

I hope this article will help you if, after trying all the methods, nothing came of it. Then I ask you to describe in detail the scheme of your actions in the comments, I’ll try to figure it out. Also, those who know of any other problems with entering the router settings, please also write in the comments.