Menu
homeMicrosoft

Self-configuration of the CI module on LG, Samsung, Philips and Sony TVs. Configuring and connecting the Tricolor TV Cam module

If you have already performed any actions, then first we advise you to reset your Samsung TV.

Factory reset Samsung TV

How to reset a Samsung TV to factory settings:

  • Go to “Support” -> “Self-diagnosis” -> “Reset”
  • Enter the PIN code (“0000” by default).
  • We agree with everything written on the screen.

Attention! We do not insert the CAM access module at this stage!

After the reset, we begin setting up the CI module on Samsung.


Let's move on to the settings

1. Go to the menu and go to the satellite channel settings. As we can see, there is already a EUTELSAT 36E satellite here. We need to uncheck this satellite. To remove this, click on the “Select satellite” line, look for “EUTELSAT 36E” and click on it (the check mark should disappear).


2. Now we need to create our satellite. To do this, find “User Sat 1” at the end, mark it with a checkmark and click “save”.


3. Go to “LNB Settings”.


4. We see that there are no transponders and this function is not available. Let's set the lower limit in the same way as the upper limit, and now you can close the menu.


5. Go to the menu again, look for the item “Broadcast” -> “Channel setup” -> “Manual setup”. In this tab we can see our satellite “User Sat 1”. Click, we see “Transponder” and the “Create” item will become active.


6. Now enter the frequency (for example, 12418), then click “OK”. Enter the transmission speed of 27500, click “OK” and “Save” again.



8. Go back to “Transponder”, but this time turn on the network search, and then click “Search” again.


9. A search will be made across all available frequencies of Tricolor TV transponders. For example, we found 277 channels and 40 radio stations.

TVs with a CI(CAM) module have gained great popularity in the video equipment market. This element allows you to watch satellite television without necessarily connecting a set-top box. Moreover, it is compatible with all operators operating in the country, including Tricolor TV. Setting up the CI module for viewing channels from Tricolor is quite within the capabilities of TV users, even those without special skills. Let us tell you how this process occurs on devices of different brands.

Some general information

The presence of a CI module on the TV makes it possible to view channels in standard quality, as well as in HD and . However, in order to access broadcasting, the item must meet the equipment requirements of the specific operator.

Required module characteristics

At the moment, TVs with a built-in receiver are compatible only with the Tricolor satellite Eutelsat W4 (new name - Eutelsat 36A/36B). The device finds the satellite signal automatically. There is no need to separately set Tricolor TV tuning frequencies for the CI module.

Important! If in the subscriber’s region another Tricolor TV satellite is responsible for signal transmission, you will not be able to use the module.

In addition, it is necessary that the television receiver supports the following broadcast formats:

  • DVB-S2;
  • HEVC;
  • 4K UHD.

Without this, the subscriber will not be able to view even the channels included in standard packages. Ultra HD format will also not be available.

Important! Before setting up the module on Tricolor TV, you must purchase a smart card from the operator that corresponds to the subscriber’s region of residence and connect it to the device.

Instructions for setting operating parameters

The algorithm for setting up the CAM module will depend on the specific TV model. We recommend that you carefully study the instructions included with the device before starting the process. This article provides general information only. Setting up the CI Tricolor module on a TV from Samsung, Sony, Philips and other models always ends with the procedure for updating the activation keys. You can submit a request for an update in your personal account on the company’s website.

Important! If you didn’t succeed in broadcasting the first time, we recommend rolling back the receiver settings to the factory level, and only then resuming attempts.

Working with Samsung TVs

For subscribers of the Tricolor operator, setting up the CI module on a Samsung TV begins with the “Satellite channel settings” section in the device menu. In this section you need to find the mark installed on the active satellite. Then scroll through the list of signal sources to the end and check the box next to User Sat1. This is necessary for the module to communicate with the Tricolor satellite. Next, go to the section for setting LNB parameters, where you change the lower frequency limit. It should be the same as the top one.

Then go to the “Broadcast” section, where the following actions are performed:

  • go to the “Channel settings” subsection;
  • select manual mode;
  • find User Sat1, which was installed at the beginning of the settings;
  • in the “Transponder” line, select “Create”;
  • set frequencies and transmission speeds;
  • save the entered settings.

After this, you need to click “Search”, check the signal level, and then start the search again. A list of television channels consisting of at least 6 items should appear on the screen.

To connect all other channels from the available subscriptions, you should return to the “Transponder” menu item, start a network search and click on “Search” again. The module will independently scan the available frequencies and display the satellite TV interface to the subscriber.

Working with Philips TVs

Setting up the CI Tricolor module on a Philips TV is complicated by the fact that these companies do not have a cooperation agreement. Philipps does not implement Tricolor software into its TVs; therefore, the CAM module of the device cannot automatically recognize the required frequencies. To help him with this, the following actions will be required:

  • In the TV menu, select “Installation” -> “Search for satellite”;
  • activate the “Reinstall channels” item;
  • click on the inscription “Start”;
  • wait until the signal level scales appear on the screen;
  • wait until the signal scales are displayed on the screen;
  • Click on the “Back” arrow to return to the main menu.

The “Set” button should not be pressed yet, so that the set parameters do not change to the default values. Next step: go again to the “Installation” section, then “Satellite Settings”, from there to “Channel Installation” and select manual mode.

Important! The LNB column must contain the Tricolor satellite found by the module at the previous stage. If it is not specified, you should roll back the settings and perform the operations described above again.

How to fill out the remaining fields:

  • transmission speed – 27500;
  • polarization – horizontal;
  • frequencies - in accordance with the equipment.

After this, you need to click “Search”, wait for the table to appear on the screen, and save it.

Setting up the CI Tricolor module on a Sony TV

TVs of this model can also be used through the “Settings” menu item. It sequentially selects:

  • item “Digital configuration”;
  • sub-item “Satellite auto-tuning”;
  • “Antenna Configuration” window (check here “Fixed antenna or DiSEqC”.

The parameters set in the scanning window are left unchanged. Next, select the first satellite and set the LNB configuration for it. The frequency range values ​​are set depending on the antenna model. The necessary data is written in its instructions or on the converter body.

Then they return to the list of satellites and click “Start”. The CAM module will begin searching for available TV channels. The subscriber will only have to save the displayed list at the end of the procedure.

Working with LG TV

On devices of this brand, first of all, you should set the following values:

  • antenna type – satellite;
  • converter type – single;
  • satellite name – Eutelsat 36A/36B;
  • converter power supply – on (then mark “LNB”);
  • Transponder frequency value is 12226.

Setting up the CI Tricolor module on the LG TV continues after saving these settings. The user needs to check the quality of the satellite signal. If the scale readings on the screen are less than 80%, the antenna needs to be adjusted.

If everything is in order with the signal, go to the channel settings item and set it to auto search mode. The module will display a list of available channels that need to be saved. Next, in the “Sound Options” menu section, you should set the MPEG4 mode. If you do not do this, the sound will not be in sync with the image.

At the end of the process, you need to go to the “CI Data” section and reset the device parameters to the factory level. After this, activation codes are requested and the setup is completed.

Setting up and connecting the Cam module
Tricolor TV

Currently, many modern TV sets are equipped with an integrated satellite tuner and a connector for the Cam module, which allows you to view TV channels from satellite operators. To view channels from the satellite operator Tricolor TV, it is better that your TV supports HD AVC broadcast standards (MPEG-4 H.264), which will allow you to view programs in both the highest quality HD and SD formats.

To connect the Tricolor TV Cam module to a TV, you need to purchase the following equipment:
1. Instructions on how to set up satellite Setting up satellite TV on Tricolor TV. How to set satellite influence on channels on lg tv. Cam-module Tricolor TV;
2. Smart card (included with Cam module and one-year subscription);
3. Satellite dish;
4. Don’t know how to set up Smart TV on a Samsung TV » How to set up Smart TV. Radial polarization converter;
5. Correct setup of Tricolor on Samsung TVs Tricolor on how to set up the module. Module for Tricolor TV Samsung DVB-S2 TVs. We reset the TV as in the screenshot (10750. How to reset the settings on the Samsung Galaxy S8 and S8. RG-6 cable (or analogue) for connecting the satellite dish to the TV.
Next, you need to install and configure the satellite dish for the broadcast programs of the satellite operator Tricolor TV (Eutelsat W4/W7 36.0`E) and use a television cable and F-connectors to connect it to the plug on your TV marked “SATTELITE”.
Tune You can install a satellite dish without the help of others, but for high-quality broadcasting it is better to turn to specialists.

Next setup work Cam-module Tricolor We produce TV specifically with telecom:
1. Insert the smart card into the Cam module until it stops (according to the annotations on the sticker);

Module CI on TV Samsung

Process setting satellite channels Tricolor TV on Ultra HD brand Samsung. online store: .

Why you can't auto-tune Tricolor channels TV on Samsung TV

Manual setting TV Samsung to satellite Tricolor TV. How to set up WiFi (Wi-Fi) on Windows 8. Using Tricolor TV as an example, we will look at How to set up Tricolor TV on an LG TV. We configure it in such a way that it would be federal.
2. Insert the module into the TV connector;
We perform the first two points with the TV turned off.
3. How to set up Smart TV on a Samsung, Lg, Philips, Sony, Saturn TV. Connecting a Samsung TV to the Internet using a network cable, wireless WiFi connection, WPS, Plug & Access systems. Using the remote control, you need to reset the TV to factory settings. For this press the button- “menu” and select: - “support” - “self-diagnosis” - “reset”, press the “OK” button, after which the TV will reboot;
4. How to set up a Samsung TV to receive channels. How to set up sound on Setting up digital channels on lg TVs. digital channels. After the reboot is complete press the button“menu”, then select the menu item “channel” - “antenna” and select the submenu “satellite”.

5. In the “channel” menu, go down to the “satellite system” submenu and click “OK”;
6. A window will appear asking for a PIN code, where we enter the values ​​- 0000 (by default), a list of satellites will appear, where you need to uncheck all the boxes next to the list of satellites, except for the satellite with the designation - Eutelsat W4/W7 36E (if you cannot uncheck the boxes marked satellites: remove the module from the TV and reset the TV settings again);
7. How to enlarge Asus Eee PC? Replace its original 512MB RAM module with 1GB. We go to the “satellite selection” menu and select the satellite - Eutelsat W4/W7 36E.

And in the LNB settings we indicate the following data:
Transponder - 12226 H
Lower gen. LNB - 0
Top gen. Setting up Tricolor TV channels on Samsung TVs DVB module from the slot and How to set it up. In this article I will tell you how to tune in to Tricolor TV channels with a KAM module installed on Samsung H series TVs. LNB - 10750;

8. Then go to the “manual settings” menu, look for transponder 12226 H and press the “search” button;

9. After scanning satellite channels Tricolor TV, click the “save” button.

This completes the setup of the CAM - Tricolor TV module, let's enjoy watching TV shows.
This material was reviewed on a Samsung TV; connecting and setting up the Cam - Tricolor TV module on TV models from other manufacturers is carried out in a similar way.

Setting up and connecting the Cam module
Tricolor TV

Currently, many modern TVs are equipped with a built-in satellite tuner and a connector for a Cam module, which allows you to view TV channels from satellite operators. To view channels from the satellite operator Tricolor TV, it is advisable that your TV supports HD AVC broadcast standards (MPEG-4 H.264), which will allow you to view programs in both high quality HD and SD formats.

To connect the Tricolor TV Cam module to a TV, you need to purchase the following equipment:
1. Tricolor TV Cam module;
2. Smart card (included with Cam module and one-year subscription);
3. Satellite dish;
4. Circular polarization converter;
5. RG-6 cable (or analogue) for connecting the satellite dish to the TV.
Next, you need to install and configure the satellite antenna for broadcast programs from the satellite operator Tricolor TV (Eutelsat W4/W7 36.0`E) and use a television cable and F-connectors to connect it to the plug of your TV marked “SATTELITE”.
You can set up a satellite dish yourself, but for high-quality broadcasting it is better to contact specialists.

We carry out subsequent work on setting up the Tricolor TV Cam module directly with the TV:
1. Insert the smart card into the Cam module until it stops (according to the instructions on the sticker);
2. Insert the module into the TV connector;
We perform the first two points with the TV turned off!!!
3. Using the remote control, you need to reset the TV settings to factory settings. To do this, press the “menu” button and select: - “support” - “self-diagnosis” - “reset”, press the “OK” button, after which the TV will reboot;
4. After the reboot is complete, press the “menu” button, then select the “channel” --- “antenna” menu item and select the “satellite” submenu.

5. In the “channel” menu, go down to the “satellite system” submenu and click “OK”;
6. A window will appear asking for a PIN code, where we enter the values ​​- 0000 (by default), a list of satellites will appear, where you need to uncheck all the boxes next to the list of satellites, except for the satellite with the designation - Eutelsat W4/W7 36E (if you cannot uncheck the boxes marked satellites: remove the module from the TV and reset the TV settings again);
7. Go to the “satellite selection” menu and select the satellite - Eutelsat W4/W7 36E.

And in the LNB settings we indicate the following data:
Transponder - 12226 H
Lower gen. LNB - 0
Top gen. LNB - 10750;

8. Then go to the “manual settings” menu, look for transponder 12226 H and press the “search” button;

9. After scanning Tricolor TV satellite channels, press the “save” button.

This completes the setup of the CAM - Tricolor TV module, let's enjoy watching TV shows!!!
This material was reviewed on a Samsung TV; connecting and setting up the Cam - Tricolor TV module on TV models from other manufacturers is carried out in a similar way.

Before setting up Tricolor TV on your TV, you must carefully read the installation instructions and internal settings. Only proper installation will allow you to avoid any difficulties during use. Installing the system is quite labor-intensive, but allows you to save on the services of a specialist. If you first study the step-by-step instructions, then no problems will arise during the installation and synchronization of equipment. You should also study the settings in advance so that the receiver works correctly.

First, you need to independently mount the antenna on the external wall of the house and adjust the mirrors to the satellite. To do this, you need to pay attention to the following points:

  • Selecting an installation location. The dish should be fixed so that it is located on the side of the satellite, which is on the equator and located in the south. Please note that there should be no obstacles between the satellite and the antenna. Even small trees can create significant interference.
  • Distance between equipment. The closer the tuner and antenna are, the clearer the system will work. In this case, setting up the receiver will be much easier.
  • Correct installation. When assembling the antenna, it should be taken into account that the converter must be installed with the holder facing up. This eliminates the possibility of the negative impact of precipitation on the functioning of the system, protecting the “heads” from bad weather.
  • Reliable connection. The converter should be connected to the cable using a special F-connector. This eliminates the possibility of problems occurring during operation. The cable must be insulated by no more than 10 mm. The connector must be tightened as much as possible.

Antenna adjustment process

The more accurately the dish is adjusted in terms of geographical position, the better the signal can be achieved at the output. The peculiarity of this procedure lies in two criteria: elevation angle and azimuth. These quantities are measured in degrees.

Please note that in the regulation process difficulties arise due to the fact that, in accordance with the region where the equipment is installed, indicators may differ and this is considered the norm.

For example, in Bryansk the angle = 29 degrees, and the azimuth = 178 degrees. This feature should not be overlooked. Check the standard mono characteristics on the official website of the Tricolor TV company.

Setting up Tricolor TV on a Samsung Smart TV

In order to properly configure the equipment, you must first familiarize yourself with the process.

In this case, the tuner model, antenna size, quality of synchronization equipment, as well as the TV model are of great importance.

How to set up Tricolor TV yourself if the settings on your Samsung Smart TV are lost? If any noise or ripples occur, please pay attention to ensure that the system is installed correctly. Measures must also be taken in the absence of channels that were previously broadcast.

To do this, debug the received signal level as follows:

  • Enter the system menu in the “Signal Level” section and find the “Settings” option.
  • Enter the password (standard value is 0000) and confirm the actions to be performed.
  • Go to “System Settings” and click on the “OK” button.
  • Select “Antenna settings” and select the list of channels in accordance with the region of use: EUTEL SAT 36V or 36A.
  • Find 2 scales that indicate the signal level. They must be filled to 70%. In this case, the work was carried out correctly and no changes need to be made. In this case, you should pay attention to mechanical damage and unfavorable factors.

After completing the above steps, you can begin to fine-tune the system. Please note that the receiver must be registered if this procedure was not carried out during the contract process. Otherwise, the equipment will not function.

Set up Tricolor TV yourself video