What version can you update your iPad to? 3. Backup using iCloud. How to install a new system via Wi-Fi

Did your iPhone or iPad not find the update or report an error in the settings section? In this article we will talk about several ways to solve the problem where instead of available update the inscription "" does not disappear Checking for an update...«.

In contact with

iOS 10 update not available on older devices?

Unfortunately, Apple has reduced the list of devices compatible with iOS 10. On iPhone 4s, iPod touch 5th generation, iPad 3, iPad mini and older models iOS devices 10 cannot be installed.

iOS update not available (“ Checking for an update..."). What to do?

Is your device jailbroken (Cydia)?

If your device has Cydia app(jailbroken), then this is main reason, where iOS 10 Update is not available along the way Settings -> Basic -> . Jailbreak developers specifically block the ability to update over the air. The point is that when iPhone update or an iPad with jailbreak turns the device into a “brick” ( eternal daisy, white apple etc.).

In order to install iOS 10 on a jailbroken device, you need to perform the procedure. detailed instructions posted .

Otherwise, try the methods below:

Restarting the Settings app

The easiest solution is to restart the program Settings. To do this, open the multitasking menu (click on the round Home button twice) and remove the program from it Settings ().

Then open again Settings, go to section Basic and check for updates in the section.

Change the way you connect to the Internet

Sometimes software updates are not found over the Wi-Fi network. In this case, you can try turning off your Wi-Fi network and look for updates using 3G.

After your iPhone or iPad finds the update, you can turn on Wi-Fi again and download the update for your device.

Resetting “network settings”

Some users have reported that resetting their network settings helped them resolve this issue. To reset network settings, go to Settings -> General -> Reset and select Reset network settings.

Please note that resetting your network settings will remove passwords for Wi-Fi networks on your device.

Update or restore your device through iTunes

If all listed methods If they didn’t help you, then most likely you will have to update your device through iTunes on your computer. Just connect your iPhone or iPad to your computer and open iTunes. In the device information window, press the key Update.

The procedure for updating and restoring software is described in more detail.

When to go to market software came out a new version operating room iOS systems, all users were interested in how to update iOS to . Read on to find out in detail how to do this.

Installing new operating systems is of great importance for those who want to fully use their tablet. Since many programs for Apple technology are written specifically for the latest firmware, removing old ones becomes an urgent necessity. on a device with an older version may not run due to their incompatibility with the outdated system.

Professionals know how to update an iPad, but it will cost you some money. If you agree to pay for their expensive services, you can safely go to service center. However, no one forbids you to sort out this issue yourself in order to further save money. Moreover, for this you do not need to be a master or understand technology at all.

The most latest update Apple has released OS 6. It is different from previous firmware the fact that it has new three-dimensional maps, Siri, as well as an integrated social network Facebok.

We will tell you further how to update your iPad to this version.

iOS up to latest version

There are two ways to update iOS on an iPad. You can choose for yourself which will be easier for you: act via phone or computer. However, first make sure of the following:

That you have established a “point of return”;
That you saved everything SHSH certificates blobs, if you are the owner of a jailbroken device, since its new version is usually released later than the operating system update;
That the tablet has enough memory;
That the charge of the updated device is full, since the process itself will require absorption large quantity energy.

If you do not check any of the points presented, you risk not only not achieving results, but also ending up as the owner of a “dummy”. To resume working functions, you will have to contact the service center and pay a lot of money for it.

How to install a new system via computer

This method will be needed for those who own Apple tablet with a version older than the fifth. Other owners can benefit from more in a simple way updates via .

Before updating your iPad via your computer, update iTunes to the latest version. During installation, the program will ask you to also install iCloud to be able to access it. After completing these steps, connect your tablet to your PC and start updating.

If you have already updated the system before, now the iPad will update automatically:

Launch iTunes and click “Cancel” when the program asks you to update your system;
Next, connect your device and wait for it to sync automatically. If it does not happen, then select the “File” section in the menu and click “Synchronize”;
After that, select the connected iPad in “Devices”;
On iPad screen click "Update".

The update will take place within a few minutes. Don't be alarmed if it starts to reboot several times - this is how it should be.

How to install a new system via Wi-Fi

Owner original device version 5 and higher can use in a fast way system updates. To do this you only need an available Wi-Fi hotspot. Next we proceed as follows.

Someday everyone iPhone user, iPad or iPod player faces the need to update the software. Gradually delving into the specifics of operation, he (the user) understands that installing new versions of games and programs requires latest firmware iOS, which runs all Apple devices. If the firmware iPhone old, then applications may not install for a reason. And old versions of applications in App Store no, so you have to update iOS firmware.

Unfortunately, the possibility wireless update appeared only in iOS firmware version 5 and higher. Owners of iPhones, iPads and iPods with firmware below version 5 will need a computer with . For those who do not know their firmware version, read -. If iTunes is already installed on your computer, you can update iOS:

Like from a computer connected to unlimited Internet

Today our computer has the Internet, so we will try to tell you how to update iOS on an iPad using iTunes and an Internet connection.

The iPad model is MC770RS, the firmware is iOS 4.3.5, this firmware does not have the possibility of wireless updating, so we take our iPad and connect it to the computer using a native USB cable. If you iPhone owner or iPod, then use these instructions you can also update the iOS firmware, the only caveat is in the case of iPhone phone it should be . If iPhone is locked to specific operator, then after the update the phone will stop receiving the network, and you will no longer receive a phone, but a player, with iPod update There are no such problems with the iPad.

Update iPad firmware via iTunes
We connected the iPad to the computer and launched iTunes. Before the update procedure began, the iPad contained music, videos, applications, contacts, photos and calendar notes; the loss of all this information is not critical for us, so we do not make backups, but rather see what remains for the firmware update field. If the data is important to you, then save other data using ours.

1. Let's start updating iOS, in the Devices section of the iTunes program, select our iPad 2 and in the Review tab, click the Update button. If your iTunes interface is different from ours, then turn it on from the left. Before clicking the Update button, we read the information above, which says that our new firmware will be version 6.1.3, i.e. the most recent at the time of update.

2. iTunes displayed a message where we clicked the Continue button, a notification with the following content:

“Purchased items have been detected on your iPad that have not been transferred to your iTunes library. You must transfer these items to your iTunes library before upgrading this iPad. Do you really want to continue?"

3. The next message, where we clicked the button – Update, contains the following:

“Updating to iOS 6.1.3 will remove all apps and media from your iPad, including purchases.” iTunes Store. To save content, perform this update using the computer with which you synchronize programs, music, videos and photos.
As a result of the update, only contacts, calendars, messages, and other settings will be saved on this computer. Do not interrupt the update process, which may take an hour or more to complete. iTunes will check with Apple for this software update."

4. A window appears called “ ", here you can see the additions and improvements to the new version of iOS. But don’t forget that we are updating from outdated 4.3.5 to version 6.1.3, so there will be many more new features than in the presented list. Click the button - Next, get acquainted with license agreement, We accept it and go about our business.

5. iTunes begins downloading the update from the Apple server, and at the top you can see the download bar and the time remaining until completion. That's it, we're off to fry some pies, let it crawl.

“There was a problem loading the iPad software. The connection time interval has been exceeded. Make sure you are connected to the network and check your network settings. You can also try again later."

This is the error when iPad update appeared when downloading new firmware; it was associated either with a heavy load on the servers or with an unstable Internet connection. Click OK, try again, click the Update button in iTunes and follow steps 1 to 5.

An hour later we return to the monitor again and lo and behold, in the Review tab of the iTunes program, we already see updated version iOS 6.1.3 and the inscription – “ iPad software updated" Thus, on the second try, iTunes was able to download iOS for the iPad and update the tablet software version.

Setting up an updated iPad
Once you install iOS on your iPad, you will need to follow a few steps to initial setup tablet, after which you can start using it. The first setting reminded me of approximately the same step-by-step actions.

1. Take the iPad, tap the only button – Continue. Next, it is proposed to configure the Internet services of the App Store, iTunes Store and iCloud, but we will not do this for now, since this setup requires wireless network Wi-Fi, click Continue - Next.

2. Go ahead and configure geolocation services, if you enable them, then navigation programs will be able to determine your approximate geoposition. We don’t need this function yet, so we select – Disable geolocation services – Continue – Next. We get acquainted with the terms of use of iOS, accept them and move on.

We refuse anonymous sending diagnostic data – Do not send, click Next. " Your iPad is now set up"and we are ready to start working with the most advanced iOS firmware, for this we tap – Get Started using an iPad.

O-la-la, the working screen with icons and among standard applications we see new programs, for example Clock, Kiosk, Maps, Reminders, separate Music and Video, which were not in iOS 4.3.5. Even more goodies of the new firmware version 6.1.3 are in Settings.

Well, that’s probably all, now you know how to update the iOS firmware on an iPad or iPhone using the Internet and iTunes. And lastly, after updating the firmware, applications, music and videos were erased from the tablet. But contacts, notes and photographs taken remained in place. Now, if there is a need, then you can.

Hello, friends! Nikolay Kostin is in touch, and in this article we will walk you through step by step how to update iOS on iPad. iOS is the operating system of Apple devices; it is found on both iPhones and iPads. Updates are periodically released that you are encouraged to install. Read on to find out how it's done.

To be honest, to update or not to update iOS is a question that makes many people doubt whether it is worth doing it at all. Personally, the decision to update iOS was not easy for me. Some may call me conservative, but I was worried that after the update some applications might work crookedly or stop launching altogether. The extreme point was that when viewing new applications in the Appstore, every second one had iOS requirements from version 6.0 and higher, and I was sitting with my version 5.1.1 and could not install anything. After that, I realized that it was time to update the system.

In general, I’ll say right away that after the update I was satisfied, the iPad began to work much faster, but of course there are some problems, the main one, in my opinion, is terrible Appstore work- it took a mega long time to load, was displayed crookedly, applications could not be installed, but this was only in the first few days after the iOS update, and then everything began to work more or less for me, and I could easily work in the Appstore.

Now let’s walk you through step by step how to update iOS on iPad:

1. This is roughly what your iPad screen looks like now:

2. Click the Settings icon, see the following on the screen, go to the Software Update tab (circled in red in the screenshot):

3. Press the button Download and install in the center of the screen. IMPORTANT! To update iOS you need at least 3.5 gigabytes free space on disk and also a good Internet connection so that update files can be downloaded quickly

4. We receive a message that it is better to put the iPad on charge, put it on, click OK.

5. The download process begins, now wait patiently...

6. We also expect to check for updates

7. After checking for updates, your iPad will reboot and the following will appear on the screen:

Move the arrow to unlock the screen

8. We see a message that the update has completed successfully and there are a few steps left to complete the installation, click the button Continue

9. We see a proposal to configure the geolocation service, select the checkbox to enable or disable it, click the blue Next button at the top of the screen.

11. HURRAY! We receive a message that the iPad is configured and ready to use. Press the button Start using iPad. Congratulations, you can now continue to use your iPad as before.

Thank you very much for your attention! I hope that this article on how to update iOS on iPad was useful to you. If you have any questions or suggestions, write them in the comments below, we will figure it out together.

There are many options for updating iPad firmware. This is a device that runs on a well-known operating system called iOS, which is often customized by Apple employees. The firmware can be updated in many ways, if you do not know how to update old iOS, then read all the methods and choose the appropriate one:

1) Using tablet, without a computer

2) Using PC with Internet access

Update tablet firmware, without a computer

We will update the old firmware of our iPad without a PC, or rather from the tablet itself. If you have iPad tablet , then you can undoubtedly use these instructions for iTunes Updates for iPad without programs. All types of new attachments are available on Apple servers in order to use this method, we will need access to the Internet. Access must be constant and fast, hence the need to use a Wi-Fi hotspot.

Before updating your iPad, you need to check that the tablet is officially unlocked and without any unlocking methods (for example, Gevey SIM for iPad) works with SIM different operators. Attention - if the iPad is locked to special operator, then you cannot update using this method.

There are cases when updating all data from the tablet is deleted, therefore, if there is information in the gadget that cannot be lost, then before updating the old firmware you need to create a backup copy of the device. To save the files we need, you can read the instructions for beginners.

On our iPad valuable information is not expected, so we don’t need an iPad backup. We decided Update iPad before the recently released iOS 6.1.3 firmware, in order to fix old bugs, the fact is that the iPad does not save previously used Wi-Fi, so each time you connect you need to enter secret password, probably after the firmware the Confirmation of connections will disappear.

Before you start updating, make sure that your device’s battery is charged more than 50%, otherwise the update will “refuse” to install, so let’s put it on charge and connect the gadget to Wi-Fi.

Go to the settings Basic>Software Update, if the iPad has internet, it will check for new firmware and if it is there, a window like this will appear where you need to click on Download and Install.

Using a computer.
Connect the ipad to the computer and launch itunes, usually if the computer has internet, the presence of new firmware is checked automatically. If there is newer firmware, then you will be prompted to update the ipad, to do this you just need to click on Download and update. Just do not turn off the ipad under any circumstances from the computer until the end of the update.

Sometimes it happens that launching itunes The window indicating that an update is available does not appear, in this case you need to click on inscription ipad in the upper right corner. You will see this window in which you just need to click on Update.

Everyone knows the generally accepted concept that updating the system is necessary, useful and correct.

Let's not refute it; indeed, newer operating system software firmware is useful. Most often, developers correct errors in them or, as many say, “remove glitches,” but, as always, there is a “BUT.” If you decide to update iOS on iPad, then you will need to know some important features. But more on that a little later. First, let's look at the update process itself.

There are two options: updating directly through the iPad itself and through a computer using iTunes.

In both cases, the first thing to do before proceeding with the update is to create a backup copy of the data. The best way to do this is in both iTunes and iCloud. Don't be alarmed, this is often just an extra precaution, but it's best to take advantage of it.

The update itself weighs quite a lot, so it’s better to connect your gadget to the mains (it’s bad if the battery dies somewhere halfway through the process) and connect to the Internet via WiFi.

Go to the menu Software Update Tool. Sequentially it looks like this: Setting then General and Software Update. Let's check if there are any updates. If there is a red icon above Setting, it means there are updates. But if we want to update our software to the seventh version (ios 7 has already been released a long time ago), then, of course, there is no need to check.

Now all that remains is to download the found update and install it by clicking Download and install. When the download is complete, the button will change to Install Now.

Updating iOS via iTunes isn't much different

We connect the iPad to the computer with a cord. iTunes will launch automatically
In the Devices menu, select your tablet
Go to Summary and click Check for Update. When iTunes finds an update, it will prompt you to do it. All you have to do is click download and update
The installation process will proceed in automatic mode. The main thing now is not to interrupt him

That's all about the installation. And now, that unpleasant “BUT”.

Unfortunately, not all iPhones, iPod touches and iPads can be updated to the seventh version (not to mention the eighth). Here are the models that will not be able to correctly accept the OS:

iPhone 4, iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s; iPod touch fifth generation; iPad 2, iPad 3, iPad 4, .
If you are the owner of such a device, then it is better not to try to install iOS 7.

It's better to take advantage official version incremental update of iOS 7.1. If you nevertheless decide to upgrade these models, then expect that not all declared features will be available to you; simply, some will not be available at all.

For example, filters on Instagram will be active only on the fifth generation iPhone, and AirDrop (file sharing function via Wi-Fi) on the iPhone 4 and 4S as well as on the second and third generation iPad will not be available at all.

Don't forget that there is a full and beta version of iOS7. If you don't full version, remember that it is only available on certain time, after which, if nothing is done, your device may turn into a “brick”. Don’t delay and either roll back to the sixth version or upgrade to the full version.

Apple users can be sure that their gadgets will always receive the highest possible hardware updates. That is, if the iPad “pull” new iOS, then he will get it. Unlike competitors who provide their operating system to manufacturers of final tablets, that is, create an extra link between themselves and the user, the Cupertino company performs all the stages itself. This allows her to interact directly with the buyer, which translates into relevant and timely device support. If closer to the topic of the article, then this means for end user that he is at the forefront of receiving new versions of system applications and the operating system without having to look for them himself. This concern for users is what sets Apple apart from other IT giants.

To ensure security, the system must be updated regularly

Like the vast majority of other actions affecting the system, this will be done through iTunes. If you left the iPad settings in the recommended state, that is, “Default”, then automatic check You already have updates turned on. Otherwise, you will have to look after it yourself. But if you have already made this choice, then you probably know what you are doing. So we leave it up to you.

So, in order to keep your iPad up to date, iOS on it needs to be updated regularly. As you no doubt understand, we are talking not only about interface changes, but also about fixing security bugs and incorrect operation system components. The need to update your iPad does not appear out of thin air. As soon as a system becomes popular, the likelihood that attackers will pay attention to it increases significantly. Their calculation is simple: if people use it, it means they store their personal data there. And what is made by people, people can break. There are no absolutely secure systems; this is an illusion. Therefore, there is a constant arms race between software developers and reverse engineers. The task of an iPad user is simple - regularly update iOS on your device to fix all critical security errors.

But this is not the only reason. Human factor may well work with Apple's own programmers, and they may make a mistake that causes the tablet to not work properly. If you find yourself in a situation where system application unexpectedly crashes with an error or, in general, reboots your tablet, then you understand what we are talking about. So, it’s worth updating iOS on iPad precisely because most of these critical errors is eliminated in this way. Sometimes even the “brakes” of the system were eventually removed by Apple with the help of an operating system update.

Update process using iTunes

As we have already said, it will require iTunes on a pre-selected trusted computer. To update, for example, iPad 1 to iOS 7, you just need to connect it to your PC. iTunes will see the connected tablet and display it in its left tab. Select the “Browse” item and click the “Update” button. Your tablet will be updated to the latest current version of the operating system, which iTunes will automatically download from Apple servers. In this case, he will perform all the required operations himself. So this is probably the easiest way to upgrade. However, the other method is also no more difficult.

Update without iTunes

More and more people are abandoning personal computers at home altogether. Mobile devices are displacing them from our apartments, because for daily tasks there are more than enough of them. In such Apple situation did not support the dependence of its devices on personal computers, and new iPad models, like all other lines of devices, can be updated without iTunes and, accordingly, without connecting to a computer at all. To do this, you just need to have a sufficient battery level. If there is an outlet nearby, then it makes sense to connect the charger, because updating iOS on an iPad is quite an energy-consuming process, as you will see. In addition, new firmware can really weigh a lot. Therefore, if possible, you should use a Wi-Fi network when you see on the screen iPad message about the update. You can also check their availability yourself in the settings. After clicking the “Download and Install” button, the tablet will do almost everything itself. You don’t even have to worry about whether there is enough space to install the update, because if necessary, the tablet itself will unload installed applications to the cloud, and then restore it to its original place. Of course, he will give you a notification with this question, and if you answer in the affirmative, then everything will happen. Sometimes it happens that downloading an update is convenient for you, but stopping the tablet from working is not very convenient. This is a normal situation, so iOS, after downloading the package, will ask whether to start the process right now. You can select the "Later" option, and there are "Tonight" and "Ask Later" options. If you chose the first, then do not forget to connect the charger before going to bed. If it’s convenient for you right now, then select the appropriate item, and all you have to do is wait for the process to complete. Your iPad is now fully updated and ready to use.

Last night, after two months of preliminary testing, Apple company for owners of all compatible iPhone models, iPad and iPod touch new firmware. Even after the release of the very first iOS beta versions 10.3 it became known that along with the update to iOS 10.3 firmware, Apple is moving all of its mobile devices from HFS+ to APFS (Apple File System), which was announced last June at WWDC 2017.

As Apple notes, with the transition to a new generation file system, the performance of mobile devices will significantly increase, and copying files or directories will be carried out almost instantly. While the transition to APFS should not affect the data and information stored on your device, we still strongly recommend that you create a backup before you update your iPhone, iPad, or iPod touch to iOS 10.3.

How to properly update your iPhone, iPad and iPod touch to iOS 10.3

Backup via iTunes

1. Simply connect your iPhone, iPad or iPod touch to your computer and launch iTunes if it doesn't launch automatically when it detects a connected device.

2. Select your device. If you want to create an encrypted backup, check the box next to Encrypt Backup. Now click the “Back Up Now” button to start backing up your device data to your computer.

Backup from using iCloud

1. Make sure your iPhone, iPad or iPod touch is connected to Wi-Fi and at least 50% charged, and only then go to Settings -> iCloud -> Backup.

2. Activate the iCloud Backup feature and then click on Back Up to start backing up your device data to iCloud.

After backup copy your iPhone, iPad or iPod touch data has been successfully created, you can start updating your device to iOS 10.3.

Installing iOS 10.3 using iTunes

If you'd rather stick traditional methods installing new firmware, you will probably use iTunes to iOS installations 10.3. If so, just do the following actions.

1. Make sure you have the latest version of iTunes installed on your computer. To do this, launch iTunes and top menu select Updates. If an update is available, install it.

2. Connect your iPhone, iPad or iPod touch to your computer and iTunes should automatically recognize it. Now select your device in the top left corner.

3. A pop-up window will then appear to notify you that an update is available for your device. If it doesn't appear, just select "Updates" again.

4. Once this window appears, click the “Download and Update” button to begin the iOS 10.3 installation process.

Installing iOS 10.3 over the air

If for some reason you can't or don't want to use iTunes, there is another way to update to the latest version of Apple's mobile operating system.

1. Make sure your iPhone, iPad, or iPod touch is connected to a power source. This is not necessary, but this way you can ensure that your device does not die during the process of installing iOS 10.3 on it. Also make sure your device is connected to Wi-Fi.

2. Go to the “Settings” -> “General” -> “Software Update” menu. Most likely, an update to iOS 10.3 will already be available there. However, depending on the speed of your Wi-Fi, it may take some time for the device to connect to Apple servers and received confirmation that the update is available.

3. Now click on “Download and Install” and follow the on-screen instructions. If the update has not yet been downloaded to the device, it will connect to Apple servers and download everything necessary files for installation. This may take some time, so be patient.

4. After downloading the update, click the “Install” button. While the update installation process is in progress, you can go about your business.

******************************************

Subscribe to our channel on Telegram to stay up to date with the latest latest news and rumors from Apple world and other largest IT companies in the world!
To subscribe to the Newappless channel on Telegram, follow this link from any device on which this messenger is installed and click on the “Join” button at the bottom of the screen.

Updating iOS (6, 7) must be done in order to close all vulnerabilities and holes in the operating system, which will ensure the security of your data.

Greetings, dear lovers and happy owners tablet computers. In today's lesson I will tell you how to update iOS, and I will tell you how this can be done in three ways.

Which method to choose is up to you, and the result of using any of these methods will be the same; if you do everything correctly, then your iOS operating system (6, 7) will be successfully updated to the latest version (at the time of writing this material, the latest version is 7).

It would be correct to think that such a popular mobile operating system as iOS (6, 7) is regularly updated.

With each new version of the system, “bugs” are eliminated previous version, various holes and vulnerabilities that may threaten the security of your device (iPhone, iPad) and your data stored on it are also closed, the system design is updated less frequently (version 7 of the system brought us not only updated system code, but also a nice design). Therefore, timely updating is, in most cases, a mandatory procedure.

If you own any of the Apple gadgets (iPhone, iPad or iPod), then you won’t care, sooner or later, it will occur to you that the system needs to be updated. You may also have heard the word “firmware”; essentially, this is the same as a system update, although with some differences. Firmware is changing the version of the operating system of a device (iPhone, iPad), both to a more earlier version, and to a later one.

If you are an avid gamer and constantly play mobile games, then you also need to update your operating system. Game developers always make their own new game compatible with the latest iOS version, but will the game support old version– this is already controversial issue. So, if you always want to play new games, then updating the system on your gadget (iPhone, iPad) is a must.

In this article we will look at three update options. As mentioned above, all these methods are different, but the result of their use is the same. These are the ways:

Updating the iOS operating system (6, 7) via Apple device . This is the easiest way and does not require any additional tools. The main thing is that your gadget (iPhone, iPad, iPod) is connected to the Internet (with using Wi-Fi or 3G). The undoubted advantage of this method is that you do not need to connect your gadget (iPhone, iPad) to your computer and install additional software. The downside is that if you have a slow Internet, the update may take a very long time. for a long time, because the new version of the operating system weighs about 1GB;
Updating the iOS operating system (6, 7) via iTunes program . This method involves updating your Apple gadget(iPhone, iPad) using special software produced by Apple - iTunes. iTunes is a tool that allows you to control your device from a regular desktop personal computer. If you decide to use this method, then you will not have to connect the Internet on the device; it is enough that the Internet is available on the computer to which the gadget is connected (iPhone, iPad);
Updating the iOS (6, 7) operating system via a file with the OS. This method is practically no different from the previous one. The main difference between this method and the previous one is that you will have to download the file from operating system. Plus this method The point is that to update the system you do not need an Internet connection, you just need to have a file with the system (you can download it from another place, for example, from a friend).

From a gadget

To update your device, follow these steps (in the order they are described below)::

Connect your device to the Internet, this can be done via Wi-Fi or 3G. Let me remind you that without the Internet, updating is impossible;
Click on the “Settings” icon;

In the settings, in the “General” section, select “Software Update” and open it;

After you have completed all the suggested actions, the device will begin searching iOS updates(6,7), if updates are found, you will be prompted to update.

Via iTunes

In order to use this method, you need to download and install iTunes on your computer. For you need:

Open iTunes and connect your device (iPhone, iPad, iPod) to the computer;
From the iTunes side menu, select your device (if sidebar not displayed press combination CTRL keys+ S);