Recovery Toolbox File Undelete Free – Online help. The main functions of the program for reconstruction Active File Recovery. Advantages and disadvantages

USB flash drive is not the best suitable device for permanent storage of files, but in life anything can happen. And situations when valuable data located only on it were accidentally erased happen regularly. However, in about half of the cases, grief can be helped by recovering deleted files from a flash drive. Under what circumstances is this possible and how to do it, read on.

I won’t get my hopes up in vain: the chances of successful data recovery from USB flash drives are lower than from stationary drives - hard drives PCs and laptops and permanent memory mobile devices. The reason is that flash drives are usually used to transfer files from one device to another. And accidentally deleted data most often ends up being simply overwritten, sometimes even more than once. And overwriting, unfortunately, destroys the information irrevocably.

Full or partial file recovery on our own possible in the following cases:

The user deleted them manually.
The drive was formatted using the operating system.
The files became inaccessible after a virus attack.
The files disappeared after splitting the flash drive into partitions.
A logical failure of the file system has occurred: it has become defined as RAW - unknown, or Windows and programs consider the entire space of the device to be unallocated.

The chances of recovery are extremely low or zero if:

The flash drive is physically faulty - it is not detected by the computer at all or is recognized as unknown device, access to its memory is either completely absent, or the size of the latter is several KB instead of tens of GB. The exception is relatively simple breakdowns that do not affect the controller and device memory.
The files were deleted using a shredder program.
The flash drive was low-level formatted (essentially repartitioned and rewritten) or reflashed (the controller microcode was rewritten).
The files are encrypted, but there is no decryption key. It may be the result of an attack by a ransomware virus or user actions (encrypted, but lost the key). In the first case, it is sometimes possible to recover files if you have a suitable decryptor.

In case of physical and complex logical faults, data recovery from flash drives is sometimes possible, but often costs the owner very much - up to several tens of thousands of rubles (not even the result, but the attempt at recovery, can cost that much). Therefore, in such situations, many people prefer to say goodbye to files forever.

How to increase your likelihood of success

Even if your case falls into the simple category, in order to increase the chances of a successful recovery, adhere to the following rules:

The fewer operations were performed on the drive's file system, the better the result. Therefore, start recovery immediately as soon as you notice missing files.
Save the recovered data only to another physical media (HDD computer, second flash drive, etc.).
Try to restore everything in one session. Don't interrupt unless absolutely necessary.
If one recovery program does not help, use others. Sometimes simple free utilities turn out to be more effective than expensive paid ones. It is impossible to know in advance what will help in your case, so try everything that is available.
If the recovery program is capable of creating and saving images file systems drives, be sure to use this opportunity. In case of unexpected failure of the flash drive or accidental overwriting before the end of reading, you can restore the data from the image.

7 best programs for data recovery from flash drives

You may already be familiar with some of the storage device data recovery programs. Our site talked about them in an article about. Today our collection will be replenished with seven more applications of the same purpose. Maybe one of them will be life-saving for you.

R.saver

Wise Data Recovery

Wise Data Recovery is another worthy tool for recovering information from stationary and portable storage devices. Available only in Windows version. Like its predecessors, it works without installation on a hard drive. Is different high speed scanning and displays the possibility of recovery of each found object.

If next to the file there is:

Red circle—data has been completely overwritten and cannot be restored.
Yellow circle—overwriting is partial, success is not guaranteed.
Green circle—the file has not been overwritten and is recoverable.

When you click on “green” files, if it is a picture or document, the program shows their thumbnails (if saved). It also has a function to search for certain types of data by keywords: pictures (imagies), audio (audios), videos (videos), documents (documents), archives (compressed files) and mail (emails).

Wise Data Recovery- fully free application and, by the way, with support for the Russian language.

How to use Wise Data Recovery:

Unpack the archive with the program into any folder and run executable file WiseDataRecovery.exe.
Select the desired media from the list and click “Scan”.
Select the files you want to recover from the list. Click the "Recover" button.
Specify the location to save the files on your hard drive.

Disk Drill

Disk Drill utility, well known to many Mac users OS X some time ago appeared in the Windows version. More precisely, in two: free - free, and paid - pro. The free one allows you to recover up to 1 GB of information, the paid one - without restrictions.

Unlike three previous applications, Disk Drill requires mandatory installation to the computer (for which it receives a minus, since this simple operation can lead to overwriting the data that the user was just about to restore). But it has a number of benefits that others do not have.

At constant using Disk Drill keeps records deleted files, and also creates backup copies of them, which increases the chances of their recovery even after a while. In addition, it supports any type of storage device and almost all file systems (it knows more than 300 unique file signatures).

Disk Drill does not have a Russian localization, but it is quite easy to use.

How to recover deleted files using Disk Drill:

Install the application on your PC and run it with administrator rights.
Select a USB flash drive with deleted data from the list of media.
Open the drop-down list next to the Recover button, which is located opposite the flash drive, and click the desired scan type: “Run all recovery methods” (use all search and recovery methods), “Quick scan” ( quick check), “Deep scan” or “Load last scanning session” (load the result of the last scan). Click the "Recover" button (or "Continue" if you have already started working with the media).
In the next window that opens after scanning, select from the list necessary files, specify the location to save them and click “Recover” again.

RS File Recovery

RS File Recovery is a paid Russian-language application. In addition to the main thing - recovering information from physical drives, it is able to save and subsequently work with their images. After creating the image, the physical device with the data can be disconnected, since the program has already “remembered” all its contents. In addition, the application has a built-in HEX editor for manual byte-by-byte correction of files, as well as FTP client to upload the recovered file to network resources.

After analyzing the storage device, RS File Recovery displays information about the data on it - when it was created, when it was changed, and whether it can be restored. This information appears in the bottom pane of the window.

Unfortunately, in the free demo version of the utility, the recovery function does not work, only viewing is available. The cost of a license starts from 999 rubles.

Like Disk Drill, RS File Recovery requires installation on your computer.

How to use RS File Recovery:

Launch the application. Select a flash drive from the list of media by simply clicking on it. All its contents, including deleted files, will be displayed in the middle part of the window.
Click on the item you want to restore. Information about it, including the forecast, will be shown in the panel below.
Drag the required files to the recovery list on the right side of the window and click the “Recover” button.
Select the saving method: to hard drive, to CD/DVD, to the Internet via FTP or convert to virtual image ISO.

Specify the destination folder on your hard drive. Follow the assistant's instructions when selecting other saving methods.

Ontrack EasyRecovery

Ontrack EasyRecovery is one of the most functional and effective programs data recovery, the main competitor of industry leader R-Studio. It successfully extracts data even with very strong damaged media, supports all types of file systems and more than 250 file formats, creates virtual images of physical storage devices, can boot from DVDs and USB flash drives, and also has a lot of other useful features.

EasyRecovery is available in several paid editions with different sets of functions. The most inexpensive is home-based, which will cost the user $79 per year. Professional, enterprise and specialized (for servers) cost from $299 to $3000 for an annual license.

Despite the enormous possibilities, even a novice user can use this program, since each stage of the work is accompanied by a built-in assistant. It is also impossible to make a mistake because it is completely translated into Russian.

How to use Ontrack EasyRecovery:

Launch the application (it is available in installation, portable and, as already mentioned, boot versions). Specify the type of media on which the deleted data is located.
Select the volume to scan (if it is a flash drive, then, as a rule, there is only one volume on it).
Select a recovery scenario. Restoring objects after deletion and formatting are different scenarios. First, try using the first one - it works faster, and if that doesn’t help, try the second one.
If the data was affected by a logical failure, identify one or more types of file systems that may be on the media.

Check again that the conditions are correct and confirm your selection. After this, the program will begin scanning the flash drive.
After scanning is completed, highlight in the list necessary objects(to select multiple, press and hold Ctrl key). Click the “Save” button in top panel main window and specify the destination folder on your hard drive.

To create an image of a storage device and work with it in the future, after starting the program, select the device in the list of media, open the “File” menu and click “Create image file”.

Active UNDELETE

Active UNDELETE is another paid utility that successfully copes with the recovery of individual deleted objects and entire disk partitions. Supports all types of media, all file systems and more than 200 various formats files. In addition to the main tasks, it allows you to solve related problems - correct errors in the partition table and boot records, create, format and delete disk volumes, etc. Like the bulk paid analogues,Active UNDELETE supports the creation of virtual drive images.

Demo version of the program available for free download, has full set functions, but does not allow you to recover files larger than 1 Mb.

The Active UNDELETE interface is exclusively in English, but the utility is easy to use, since each action is accompanied by a wizard.

Unfortunately, it does not have a portable version. Installation only.

How to work with Active UNDELETE:

Launch the program. Click “Recover deleted files” in the first window that opens. This will launch the recovery wizard.
The first window of the wizard is a brief information about how the program works on English language. To proceed to the next step, click “Next”.
Next, select one or more devices on which the desired files are located. Click "Next" and in the next window - "Scan".
After scanning, mark the items you want to recover and proceed to the next step.
Set the saving options - folder, file names, renaming in case of matches, etc. You can leave everything as default.

The last step is the actual recovery. To launch it, click the “Recover files and folders” button.

If you want to create a virtual image of a flash drive, open the “Disk image management” section in the main window and run the “Create disk image” wizard.

Purpose of the Recover My files program

The program is designed to recover files in case of deletion, formatting, installation of Windows, or partition inaccessibility (RAW format, partition deletion). Allows you to recover information both using the file system and using the characteristic signatures of various file types (documents, sounds, images, videos, etc.) Supported file systems: NTFS, FAT12, FAT16, FAT32, exFAT, HFS, HFS+.

Author of the GetData program, www.recovermyfiles.com. Distributed as a demo version - to save the recovered information you need to enter a registration key.

Example of using Recover My files

Let's take as an example usb flash drive 2GB, which, when accessed, issues a request for formatting, and in its properties displays the file system as RAW.
Let's launch the program. By default, it starts as a master.

The first step is to select a recovery mode: files or disk.

Recover files – recovering deleted files from a healthy partition
Recover drive - data recovery if a partition is unavailable

Our case is the second. Select Recover drive, click next.

Next, select our JetFlash Transcend 2GB drive and click next again.

On last step Before starting the recovery, we need to choose what we need to restore.

Automatic drive recovery – restore everything you can
Drive recovery using selected file types – you can specify what type of files we need (documents, photos, videos, music, etc.)

Select the first item and click Start.

A green data search progress bar is displayed at the top. On the left in the tree structure you can see those found on at this stage data structures. When scanning is completed, a corresponding message is displayed.

() - This free tool to recover data from NTFS drives. The program is compact, reliable and extremely easy to use. However, some users, especially those who are not experienced enough, may have problems or questions while using the program. That is why we have created this instruction manual, which describes all the functions of the program and provides answers to most questions. Please read this document before contacting our support team.

Recovering deleted files

Recovery Toolbox File Undelete Free has an intuitive step-by-step interface that requires a minimum of user actions. The recovery process is divided into several steps, at each of which the program requests the relevant data. All you need to do to recover your files is follow the on-screen instructions, enter necessary information or perform the required actions, as well as use the button Next(Next) to go to next step. Please note that for correct operation The program must be run with administrator rights.

1. Welcome screen

At this step, the program displays a welcome message. To move to the next stage of recovery, click on the button Next(Further).

2. Disc selection

At this recovery step, you must select the drive you need from the list of NTFS drives detected on your system. Simply select the desired drive letter from the list and click the button Next(Further). The program will begin scanning the selected disk for deleted files and folders. Typically, this process takes a few seconds, but in your case, depending on the size of the disk and its contents, the time may be slightly longer. After this operation is completed, the program will automatically proceed to the next step of the recovery wizard.

3. Selecting files to recover

This main screen recovery wizard that allows you to view deleted files and folders and mark them for recovery. If you are not sure where the file you need is located, use the built-in search, which supports wildcards (use the asterisk (*) to replace any sequence of characters in the file name or extension).

The recovery wizard screen is divided into two functional areas. Left side windows contains a tree that allows you to navigate through remote folders on the selected drive. The contents of the selected folder are shown in a table on the right side of the screen. The table also displays important characteristics and file properties. Using the red arrow above the table, you can move up one level.

The table contains a list of deleted files in the selected this moment folder and their properties: size in bytes, date and time of deletion, attributes and, most importantly, the degree of deletion of the file. If those areas of the disk on which the file was located were overwritten, recovery source file will be impossible. To speed up the process you can use the button Select good files only(Select only good files) below the table to select those files that are highly likely to be recovered. Buttons Select all(Select all) and Deselect all(Deselect) located on the right allow you to select all files at once or deselect all files, respectively. The same functions are available in the pop-up menu, which opens by clicking right click mouse over a free area of the table.

Once you have selected the files to restore, click the button Next(Next) at the bottom of the screen to move to the next step.

4. Selecting a folder to save recovered files

At this stage of recovery, you need to specify the location where all selected files will be saved. This can be done in several ways. To select a folder, enter its name and path in the input field at the top of the program window or use the standard file open dialog by clicking on the corresponding button to the right of the field. You can also select one of the previously used paths by clicking the small arrow button on the right side of the field and selecting the desired path from the drop-down list.

You will also need to specify the recovery mode you want. Use the option Directory tree(Folder Tree), if you want the program to restore the original folder structure in the specified location. Using the option One directory for all files(One folder for all files) will cause Recovery Toolbox File Undelete Free to save all selected files to the folder you specified. Exit, or use the button Back(Back) to return to one of previous steps and repeat the recovery with different settings. You can also go back to the very first step to restore new file or a set of files.

As you can see, Recovery Toolbox File Undelete Free as intuitive as possible. If you have any questions or problems while using the program, please contact our support department - we will be happy to help.

Active File Recovery- a program that recovers deleted and damaged files. The functionality of the utility provides support for file FAT systems 12/16/32, works with any types of hard drives and memory cards. If necessary, Active File Recovery can function without installation on the computer's hard drive. Active File Recovery free download you can on this site.
Active File Recovery is designed to search for and then recover files damaged as a result of malicious virus attacks, computer failures and software, or deleted by the user himself. A distinctive feature of this utility is the ability to recover after the storage medium has been damaged or formatted. The program successfully recovers and recognizes 28 types of files - photographs, graphics, documents, including archived ones.
The utility's interface pleasantly pleases with its simplicity - there is nothing superfluous in it. Depending on the user’s wishes, the program scans the storage medium in two modes – fast and full. Quick search (QuickScan) takes only a few minutes; this function is used primarily to search for files without subsequently copying them to another medium. If quick search did not produce results, the user is asked to use the QuickScan+ function, thanks to which the chances of finding the necessary files increase significantly.
Mode full search(SuperScan) is used if you need to find missing partitions on your hard drive, or if folders and files have been severely damaged. For processing hard drive 500 GB in size in this mode it will take only 50-60 minutes
Found and recovered data can be copied to any of the available hard drives using the Recover button. Using the Search button, you search for data on the entire disk space.

Main advantages Active File Recovery

Simple and convenient interface.
Two search modes.
Support for common file systems.
Recognition of 28 types of files.
Recovering data from damaged partitions

Active File Recovery is a resuscitation program for recovering files on various devices storage:

hard disks, And memory cards),
cd/dvd/bluray discs.

Active File Recovery is an effective file recovery program

QuickScan and Superscan modes allow you to select optimal ratio recovery time/efficiency. It is also possible to create a virtual copy of the disk and restore from raid 0-1-5 (in the pro version).

In total, this makes Active File Recovery a powerful, effective and, in some situations, an indispensable tool.

Devices from which files can be recovered

Active File Recovery works with the following media types:

IDE/SATA hard drives, eSATA and SCSI HDD, SSD
USB flash drives and memory cards
RAID arrays (RAID-0, 1, 5).

Types of files to recover

Active File Recovery scanner recognizes basic file formats, which are most often deleted. Among them we note:

graphic files:

files Adobe Photoshop
Raw files
photos and pictures

media formats:

music and audio
videos

text files:

text files
Microsoft documents Office

Active File Recovery Features

Fast and deep scanning

Option QuickScan useful if files were recently deleted: for example, after emptying the Recycle Bin or quick formatting.

Method SuperScan should be used if QuickScan is unsuccessful. SuperScan is an analogue of DeepScan in Recuva and similar programs. Finding files takes much longer as it is scanned all hard disk. This, accordingly, increases the chances of recovering deleted files.

There is also an extended version - QuickScan Plus. Unlike QuickScan, all unused space on the storage device is scanned.

In each mode, saving the search session is available. In other words, you can save the results and open them for analysis and restoration later.

Last chance for recovery and file signatures

In the program version – Active File Recovery 13 – the Last Chance recovery option has appeared.

At this type search Active File Recovery tries to find files based on signatures. You need to understand that in this case some of the metadata may simply not be restored - including the creation date, file name, etc. At the same time, if standard methods scans did not help, Last Chance recovery will bring results.

The original file extension is usually not saved during Last Chance recovery. Recovered files are grouped by type, signature, and other surviving data. Subsequently, it is convenient to organize them through file manager File Organizer.

Convenient file sorting via File Organizer

Recovered files may be missing extensions and names. Therefore, File Organizer is convenient when viewing results. You can create special folders and organize files by signature.

File Organizer distributes files by extension, allowing you to view data through previews, move items to another folder, etc.

Checking the results through preview

The preview is useful for quickly viewing the contents and assessing the success of file recovery before saving it. In this case, the files are placed in RAM and are not written to disk without the user's knowledge.

Active File Recovery integrates an image viewer (jpg, png, tiff, bmp and other formats).

Recovering deleted and damaged RAID arrays

One of strengths Active File Recovery - recovering files from a RAID array. The program "glues" an array of several disks. By connecting the virtual image to the list of devices, you can try to restore the data.

Creating a Disk Image

Using Disk Image, you can create a complete copy of a logical drive or physical device storage (HDD, SD card, USB drive). This is a kind of insurance against failed recovery and overwriting deleted files.

After creating the image, you can work with it as with a regular device storage Supported following types virtual disks:

Active@Image
RAW image
VMWare
VirtualPC Disk image

Where to download Active File Recovery for review

When to use Active File Recovery utility

To restore files after deleting them from the Recycle Bin, emptying it, or files that were deleted without using the Recycle Bin (for example, if they were large files)
Recovering files lost as a result of accidental or thoughtless disk formatting, after viruses, system error and so on.
Search for photos and pictures, data recovery, or images lost after formatting a memory card (SD or CompactFlash)
Returning information after deleting a partition, damaging or formatting it, or a disk with bad sectors

Main functions of the reconstruction program Active File Recovery

“Last Chance” reconstruction method for identifying files by their signatures when none of the recovery methods work
File recovery using 26 types of signatures: books, flash, audio, archives, and many others.
The Ultimate edition includes a Linux-based LiveCD, making x86 & x64 easy to boot UEFI systems For further recovery
Support for file recovery function for relatively rare file systems, including exFAT, Apple HFS+, Unix UFS, Linux Ext2/Ext3/Ext4 BtrFs
Reconstruction and return partially and completely deleted entries MFT to NTFS
Support for 4096-byte sectors on HDD
Active file recovery app works with images in RAW format, effective recovery files after deletion
Working with VMWARE & VirtualPC HDD images, you can open and work with them as with regular hard drive
Define and scan multiple sector ranges
Multitasking: Active File Recovery allows you to use QuickScan and SuperScan modes simultaneously
Progress tracking: displays a map of scanned sectors and metadata found during scanning
Recovery deleted photos, pictures if they were deleted from the flash drive or lost as a result of formatting the memory card
Support large disks– more than 2 TB
The File Recovery file organizer allows you to determine file signatures, reorganize files into a tree, rename files and preview them before making changes
Recovering deleted information from damaged, formatted or defragmented media (file recovery function)
Support in professional editorial staff RAID arrays, their reliability and fast recovery deleted files after deletion
Several types of disk scanning: QuickScan (fast), SuperScan (superscan), “Last Chance”
File function Recovery SuperScan recognizes 117 file types by signatures and sorting in folders