How to record streaming audio from online. Quick selection guide (links to download free programs for recording audio and video streams)

Streaming audio and video tracks is one of the common ways to not only reduce the load on servers with multimedia data from which downloads are made, but also to facilitate the task of playback on users’ computers, since they do not need to wait for the file to be completely downloaded.

However, this method has a small problem. Typically, such streams cannot be saved to disk using standard means. This circumstance has led to the emergence of more than several dozen special programs for recording tracks to a file.

Unfortunately, today the best utilities for recording streams are not free. In a good case, you are provided with demo versions that are reduced in functionality or trial versions that are limited in duration.

The situation became this way after the judicial systems kicked out from the Internet free programs that were superior in all respects, such as StreamBox VCR and GetASFStream. Mentions of them can still be found on dubious download sites, but in most cases the files offered are viruses.

However, the problem of recording media tracks can still be solved, albeit in a roundabout way. The first step is to use free web services for recording streaming media, which require only a link to a page with audio or video to enter. For example, a link from YouTube.

If the services cannot help you in any way, then you can record media streams while they are played on your computer. If it’s a little simpler, in the latter case, first you launch a recording program that will save everything that is transmitted to the speakers and to the screen, and then open and play the audio/video you need from beginning to end.

Note: Of course, these are not the best solutions. However, they are free and available to everyone. And their potential is quite enough to solve most emerging problems.

Note: When using these programs, you must remember that there is a concept of "copyright". Of course, it is not so relevant for our country, but the concept still exists.

Review of free programs for recording audio and video streams

If you need to record videos from famous media sites like YouTube, then using online services like savefrom is enough. Just enter the desired page address with the media stream in the input field and click "download". Today there are many such services. Basically, they differ either in the list of supported sites, or in the way the resulting files are provided (sending by email, various formats, etc.).

Unfortunately, these services will not always be able to help you. For example, a media site may not be supported by the service. Or the video is displayed using a unique player that uses clever loading algorithms. Or...

If this happens and the services cannot cope with the task, then you can use a workaround. Namely, record media tracks while playing audio and video on your computer. Of course, with such recording there will be a slight loss in quality, but this fact is more than compensated by the fact that you can record any audio or video, no matter where it is located and no matter how technologically it is played.

Jing is a simple and intuitive interface for recording audio and video streams

Debut Video Capture

Audacity

The use of a home PC is incredibly versatile. In particular, it is widely used for recording a variety of sounds.

Recording music at home, creating a variety of podcasts and voice notes is used by a large number of users.

It is for them that this review of three excellent and truly free audio recording utilities is intended.

Audio Master

A Russian program for recording sound from a computer allows you not only to record speech, but also to edit the track.

This is more of a full-fledged editor than a special utility for recording audio. Nevertheless, it performs at a decent level as a home studio.

First you will need to download a program for recording sound in Russian, then install it. After installing the program, creating a record will occur in three simple steps.

Stage I: Recording

The “Record sound from microphone” option is highlighted in the window. It will open the recording window.

In it you will need to select a recording device (drop-down list after the “Select recording device”) item.

If only one microphone is connected, it will be the default recording device.

Then you will need a large button in the middle of the window (Start a new recording). Recording begins with a three-second delay, so there is time for preparation.

During the process, you can pause it, and if something doesn’t work out, then cancel it altogether and start again.

The “tick” at the bottom of the window allows you to record the track directly to the file being processed.

Stage II: Setup

The recorded file can be edited. Special tools are used for this:

If the recording turned out normal and without any effects, then you don’t have to worry about adding them. It is now available in the editor as a regular track.

In addition, the audio track may be cut from a home (or any other) video.

Phase III: Conservation

After editing, the finished track can be saved in one of seven formats (WAV, MP3, MP2, WMA, AAC, AC3, OGG, FLAC).

Free Audio Recorder

This is a great little program for recording audio from a microphone. To record sound, you must first download and then install the program.

Once the installation is complete, the steps will look like this:

The program itself is simple and not very different from a standard audio recording utility. It's nice to have the ability to save records to a specific directory.

This is very helpful in organizing a large archive of records.

The only sad thing is the inability to capture sound from the computer itself.

NanoStudio

The name of the program is completely true. It includes all the necessary tools to create a complete composition.

And thanks to the mobile version, they all fit into a mobile phone.

The main sound generation comes from the virtual synthesizer and sample pad. Additional tools include a drum machine, sequencer and mixer.

The finished song would be incomplete without vocals, but it will have to be added in another program.

You can add multiple effects to each track.

Sound recording in the program occurs using a variety of special mixing tools.

Fifteen cells are available to the user for simultaneous use of various tools:

is the process of recording streaming audio to a hard drive in real time. You can always record your favorite Internet radio show and listen to it at a time convenient for you. You also have the opportunity to listen to the recording on your player or any other mobile device.

In this article I want to talk about using the most popular music players at the moment: , and .

Record audio online in Aimp3 player

In the capture settings, you can also enable the option to split the recording into tracks, by size or by time and adjust the delay, as well as specify whether to record tags or not. Tags are information about the author, track title, genre, etc.

Click Apply And Close.

Turn on the Internet radio. You can select it from the catalog. To do this, go to the menu, select the item Utilities / Internet Catalogradio stations.

To enable recording mode, you must press the key Radio Capture.

To end recording, press the key again. That's all the arithmetic is.

Recording Internet radio in Winamp

With a player the situation is somewhat different. Here we need to install the additional Streamripper plugin.

After installation, launch Winamp. The Streamripper module will launch automatically. Go to settings, to do this press the key Options.

On the tab Connections put a tick next to the item Try to reconnect to the stream if it drops– reconnect to the stream in case of a break. In order to limit the file size, activate the option Don't rip over X megs and indicate the size in megabytes in the window Megs.

On the tab File indicate the path to save the audio file and activate the option Rip to separate files if we want to split the recording into tracks. To write to one file, use the option Rip to single file. These are the basic settings of the plugin.

You can also choose a skin for Streamripper in the Skins tab, like this one.

To start recording an audio stream, click on the button Start, to complete – key Stop.

Record audio online using JetAudio

This is done by pressing the Record button, which is located at the top of the player.

After clicking, the sound recording window will open. Here you can select the audio source, enable the recording timer, select the final file format, recording directory, file name template and some additional parameters, such as (available only in the Plus version).

To start recording, press the key Begin, to complete – Stop.

That's probably all.

As you can see, there is nothing complicated in online audio recording No.

Use the option that is convenient for you.