Set an alarm on your digital watch. How to set up an electronic wristwatch correctly. Setting the time range for repeating signals

Electronic table alarm clock with temperature measurement function

LCT047

BEGINNING OF WORK

1. Open the battery compartment.

2. Insert 3 new batteries AAA type according to polarity.

3. Close the battery compartment.

4. Once the batteries are inserted, the LCD display will light up. The default time is 02:00.

Attention:

If the display does not light up, try changing the batteries or pressing the button RESET.

CLOCK SETTING BUTTONS

SNOOZE / LIGHT– press this button to turn off the ringing alarm. In any mode, press this button to turn on the clock backlight for 5 seconds.

MODE– press this button to switch from normal mode to alarm mode and back.

ALM ON/ OFF- V normal mode/ alarm mode, press this button to turn on/off the alarm / alarm snooze mode.

ADJ- In normal mode, press this button to move to date/month/year. In setting mode, press this button to change the setting value.

°С/°F– press this button to select the temperature display format.

RESET– Click this button to reset all settings. If there are errors in the clock operation, you need to reset all settings and reset the clock.

CHARACTERISTICS

1. Alarm snooze/backlight button ( SNOOZE / LIGHT)

2. LCD display

3. Mode switch button ( MODE)

4. Alarm on/off button ( ALM ON/ OFF)

5. Set button ( ADJ)

6. Temperature mode format selection button °С/°F

7. Button RESET(reset)

8. Battery compartment cover

9. Stand

Arrangement of symbols on the display

Normal mode

4. Day of the week

5. Temperature

Alarm mode

1. Alarm time

2. Alarm icon

3. Alarm mode

4. Alarm snooze icon

SETTING THE TIME AND CALENDAR

1. In normal mode, press and hold the button for 3 seconds ALM ON/ OFF

2. Press the button ADJ

3. Repeat the above operation to set HOURS - MINUTES - SECONDS - 12/24 MODE - YEAR - MONTH - DATE.

SETTING THE ALARM

1. In normal mode, press the button ALM ON/ OFF once to turn on the alarm, the icon will light up « "; twice – the alarm repeat mode will turn on ( SNOOZE), the “ Zz"; three times – both the alarm clock and the snooze mode will turn on.

2. In normal mode, press the button MODE to set the alarm time.

3. Press and hold the button for 3 seconds MODE. The hour number will begin to flash.

4. Press the button ADJ to set the correct value.

5. Repeat the above operation to set the minutes.

Attention:

1. After turning on the snooze function, the alarm will ring 5 times within 60 seconds with a 5-minute break.

2. Press the button SNOOZE / LIGHT to stop the alarm from ringing and switch to snooze mode. Press the button if you want to not only stop the alarm from ringing, but also turn it off completely.

REPLACING BATTERIES

When the symbols on the display become dim, you need to replace the batteries - 3 pcs. type AAA.

ATTENTION!

Please dispose of used batteries in a safe manner. environment way.

When buying chronographs abroad, owners are faced with the question of how to set the time on an electronic watch. The operating instructions for them are written in foreign language, so sometimes it's difficult to figure out the settings. Standard digital clock have only two buttons for settings "MOD" And "SET". The first one is used to switch setting modes, i.e. date, time, alarm clock and more. The second is responsible for changing parameters and saving them.

Settings

How to set the time on an electronic clock using the MOD and SET buttons:

Hold MOD on a short time. The editable field will start blinking. If several fields are blinking at once, with one click on MOD you can switch to the required field.
Using SET we install required parameters. The values can be changed by pressing the button multiple times.
Using MOD, switch to next fields and also, using SET, change the values to the required parameters.
Once completed, press MOD to exit settings mode.

This instruction is about how to set up a digital watch with 2 buttons. However, there are cases when digital devices installed additional buttons. Usually on such watches they serve as a value switch up and down. How to set up an electronic clock in this case? Much simpler:

Use the steps above.
After pressing MOD you will switch between modes.
After moving to another field, press SET to begin changing parameters.
By pressing additional buttons on the other side of the watch, change the values. The top button increases the number, the bottom button decreases.
When finished, press SET and switch mode. When you are finished changing the settings, press MOD to exit.

How to turn on and off the alarm on an electronic watch?

How to turn off an alarm on an electronic watch? This function is designated “ALARM” on the watch. In order to enable or disable it, you need to use the MOD button to find a field with such an inscription and use SET to change set value. OFF – turn off, ON – turn on.

A significant part of electronic watches is manufactured abroad. By ordering them from well-known companies, people receive high-quality and durable electronic watches, the instructions for which do not contain Russian text. Electronic wrist watch They contain many functions, but they only have two buttons, which can be confusing when you need to configure them. In fact, everything is not as complicated as it might seem.

How to set up an electronic clock?

This is done quite simply. Usually in electronic wristwatches the first button is labeled with the word “mod”. It is needed in order to switch device functions, which include settings. The other button is called "set". It is she who changes the value selected by the first button.

So, to set the time, you need to press the first button. This will cause the number displaying the hour to flash. Now you need to press the second button, and the number will change. When the required value is set, you need to press the first button again to make the minutes flash. They are configured in the same way as the clock, by pressing the second button. Now that the time is set correctly, you need to press the first button again to exit the setting mode.

Sometimes electronic watches have not two buttons, but four. In this case, setting them up is even easier; you also need to press the “mod” button, and then, when the clock numbers flash, press first “set” and then one of two additional buttons. The first (top or left, depending on the model) increases the value, the second - decreases. After this, you need to click on “mod” again and do the same steps with the minutes.

How to set up an electronic clock if there are even more buttons?

In this case, it is better to follow the instructions. Typically, additional watch buttons cause Digital Thermometer, calendar or stopwatch, they simply display them, but do not customize them. To configure, you need to press the “mode” button several times, scrolling through function after function. When the required option is displayed, you can start setting using the “set” button. Digital Watch This allows you to configure everything they contain: time, date, alarm, stopwatch, etc.

Setting an alarm on an electronic watch

Almost all electronic watches have an alarm. To start it, you need to press the first button several times, thus reaching the “alarm” inscription. The time is set as described above, the alarm is started and turned off by switching using the “set” button in the “on/off” field.

VST productions are gaining more and more popularity in the electronics market. They are made in China. The VST clock is made in modern design and have several options. Desktop models, thanks to the folding leg on the body, can be placed anywhere: on a table, shelf, bedside table, etc. Wall-mounted electronic VST clock, which are hung on the wall.

Short description

VST watches, made in a strict and laconic design, look very cozy and at the same time quite modern. All models have a 24-hour time format and an alarm clock. In addition, some wall-table options have a voice message time. All VST clocks have backup power. In case of an emergency, the time is saved in the clock memory. When you turn on the light, you do not need to set the clock and alarm again. Each model also has different color schemes.

In general, the VST watch is quite simple to use and is quite suitable for its purpose. price category. They will look great not only on the bedside table in the bedroom, but in the office on the desktop. Made in a beautiful design, with streamlined corners, the clock will easily fit into the interior of absolutely any residential or office space.

The body is made of high-strength plastic. The kit includes instructions in Russian.

Alarm

One of the main features of the VST clock is the built-in alarm clock. By choosing the one you like best from the assortment of signals, you can make your morning rise as pleasant and comfortable as possible. For those who like to take a nap, there is separate button call delay. A repeated signal will certainly not allow you to oversleep on your way to work.

The VST clock operates on In case of a power outage, autonomous power supply, powered by two batteries. It should be remembered that if the watch breaks down, in order to avoid electric shock, you should not open the case and try to repair the device yourself.

VST clock: instructions

All models are equipped with the following buttons:

Volume.
Tuning management.
AM/FM band switch.
Alarm settings.
Time settings.
Minute settings.

To set the time, you need to press and hold the [Time] button. To set the hour, press the [Clock] button, minutes - the [Minutes] button and hold until it is set. right time. Then release the [Time] button.

The alarm time is set as follows:

1. Click the [Function Selection] button.

2. Set the alarm time:

Press and hold the [Alarm] button.
Press the [Clock] button to set the hour.
Press the [Minutes] button to set the minutes.
Release the [Alarm] button.
To check the alarm time, you need to restore the settings as indicated above.

To set an alarm ( standard signal), necessary:

Set the alarm time as shown above.
Switch [Function Selection] to .
Turn [Volume] until you hear a click.
Press the [Sleep] button to turn off the alarm.

Call repeat function

When the alarm rings, you need to press the [Snooze] button. After 9 min. the signal will sound again.

Talking clocks come in a variety of versions: wristwatches, tabletops, and keychain watches. The variety of form factors also determines the variety of control options. Below are instructions for the option talking clock with four control buttons.

Legend

S1, S2, S3, S4 - Control buttons;
"di" - short sound signal, which the watch may emit during adjustment.

Note: IN different models watch control buttons can be located differently.

Brief description of the functions of the control buttons

Press the S1 button to announce the current time;

Current time broadcasting can operate in the following modes:

12-hour broadcast system;
24-hour broadcast system;
Hourly announcement of time from 7 am to 9 pm (7-21 in a 24-hour broadcast system).

Press the S2 button to set the time, alarm clock, hourly time announcement mode and turn on/off the alarm clock and hourly time announcement mode.

Press S3 button to select the alarm melody and to adjust the minutes in time setting mode and alarm setting mode.

Press the S4 button to adjust the clock in time setting mode, and to switch between 12 and 24 hour broadcast systems.

Setting up 12 and 24 hour broadcast systems

The S4 button is responsible for switching the talking clock between modes of voicing the current time in 12-hour and 24-hour formats.

Press the S4 button, if there is no sound signal, then the clock is switched to a 24-hour broadcast format. Then press the S1 button to speak the time and make sure the selected setting works.

If, when you press the S4 button, you hear a “di” sound signal, it means that the current time audio mode is turned on in a 12-hour broadcast format. Press the S1 button to speak the time and make sure that the selected setting works.

Continue to perform the steps described above until you set the desired sound mode for the current time.

Time setting mode

Press button S1 to check the correct time. If the time is not set accurately, follow the instructions below:

Press the S2 button (a “di” sound will appear);
After completing the time setting, wait 5 seconds until the “di” sound signal appears, which means the settings taken into effect;
Press S1 button to check the current time.

If the announced result does not meet your expectations, repeat setting the current time of the talking clock again.

Alarm setting mode

Press the S3 button to select the alarm melody, continue until you hear the desired melody;
Press the S2 button twice (a “di” sound will sound);
Press button S4 to set the desired number of hours. Each subsequent press increases the number of hours by one;
Press button S3 to select required quantity minutes. Each press increases the number of minutes by one;
After completing the time setting, press S1 button to check the alarm time;
To finish setting the alarm, wait 5 seconds until the sound signal “di” appears;

To cancel or activate earlier set alarm clock press the S2 button three times (a triple “di” sound will appear). then press the S3 button, if you hear a “di” beep, then the alarm is activated. If there is no beep, then the alarm is turned off

Press the S3 button until you select desired mode, then wait 5 seconds until the “di” sound appears, indicating that the alarm settings are saved.

Setting the hourly time mode

Press the S2 button three times (you will hear a triple “di” beep);
Press the S4 button (a “di” sound signal will appear), which means activating the hourly time mode. Attention! The time will be spoken every hour, regardless of the time of day;
Press the S4 button again (you will hear a double beep "di"), which means activating the hourly broadcast mode from 7 am to 9 pm;
Press the S4 button again (a loud and short “di” sound signal will appear), which means turning off the hourly time mode.

For questions regarding training in use technical means rehabilitation, please contact us in any way convenient for you from those listed on the page.