Is a TV suitable instead of a monitor? Connecting the TV to the computer. And they forgot about digital TV...

The question of the advisability of using TVs as monitors arises against the backdrop of a steady trend towards a reduction in the cost of the former and an improvement in image quality and diagonal size. Let's try to find the answer to it.

It must be said that in addition to its main purpose - broadcasting television programs, it is common practice to use modern televisions as multimedia players (screen in home theater), as well as devices to which images are displayed from game consoles. And models that support SmartTV can generally be an alternative to a computer. And all this is good, is the TV capable of providing full-time job With text files, graphic images or video editing?

The majority of TV models do not require a person to remain in front of their screen for a long time. A picture characterized by extreme brightness, contrast and saturation has a tiring effect on the eyes. And the presence of all kinds of enhancers, the purpose of which is to give the image maximum realism when viewed from a considerable distance, leads to a deterioration in the clarity of the text on the display. In addition, the presence of embellished color rendition, and in addition the narrowness of coverage color spaces sRGB, not to mention AdobeRGB, does not allow you to produce correct operation video and photo editors.

Of course, the whole aspect of the capabilities of TVs opens up when watching movies on the Internet or active gaming. This statement especially applies to televisions that have a large screen diagonal, which significantly increases the realism of everything that happens on the screen. Below are considered weak and strengths TVs, if used as computer monitors.

Positive aspects

1 - The absolute trump cards of TVs include their cost, taking into account the size of the screen diagonal. Purchasing a TV will allow you to save a lot, as its cost is significantly lower than that of monitors of similar sizes.

2 - TVs have special modes works that allow, for example, dynamic lighting of dark scenes when watching movies or while playing games. Actually this technology and was first used on televisions, and only much later it began to be used on monitors.

3 - Large screen allows you to work comfortably small details, which is important when editing video. Many videographers have to use two monitors for this, which are installed back to back. And of course, it’s much easier when all the same things can be done on one TV with a large diagonal.

4 - An important advantage of a large television screen is the effect of immersion into what is happening, regardless of whether you are watching a very interesting film, or computer game An action scene ensues.

Negative sides

1 - TVs with IPS matrix have increased level contrast, and this inevitably leads to a loss of detail in black shades. This is especially noticeable if the screen is located at a great distance.

2 - For embellished pictures on TVs, the saturation is excessively raised, and this has a negative impact on the ability to perceive colors and does not allow you to work in photo editors in the correct mode.

3 - The TV does not provide the same clarity as on the monitor if you are surfing the Internet or working with texts. As a rule, the culprit is a system designed to process images in order to embellish them. On some models, it is possible to solve this problem by disabling text smoothing.

4 - If the model is with big screen is installed at a close distance, then on the screen you can see the individual pixels that are the components of any image. It is for this reason that for TVs whose diagonal exceeds 32″, it is recommended not to use a screen resolution lower than FullHD (1920x1080).

5 - If you work for a long time using a TV screen, your eyes get very tired. This is also greatly facilitated by the need to constantly move the gaze left and right across the surface of the large screen, and moving the eyes down and up is even more tiring.

6 - A large number of TVs have an image delay (Input Lag). Incident lag (not to be confused with the time required for the matrix to respond) is the length of time it takes for the TV to display the signal sent to it on the screen. Simply put, with each action taken, there will be a delay by the amount of Input Lag, which can last from 30 ms to 150. While watching a TV show or movie, this function is practically unnoticeable. The bulk of modern TVs have special modes, the use of which can significantly reduce the output delay. In addition, today there are models, such as the Sony KDL-32WD603, in which it was possible to reduce this effect to minimum level, due to which there is almost no influence on the perception of the picture.

How can you connect your TV to your computer?

Connecting a TV to a computer can be done using one of the three main interfaces: VGA (D-Sub), DVI and HDMI. And if with the help of the latter you can broadcast in FullHD quality, then the use of the first two is recommended only when other pairing scenarios cannot be implemented.
1 - Connection using a VGA connector. The main interface that allows you to connect the monitor to a computer is the analog VGA port. Therefore, if you decide to use a TV as a device through which information will be output, you can use this connector. However, we must remember that we should not wait maximum resolution the broadcast picture is at the FullHD level, so it will be equal to 1600x1200 pixels. In addition, you will have to additionally use a cable with “tulips” (RGA) or “minijack” (3.5 Jack) to transmit sound.

2 - Connection via DVI interface. The majority of computer video cards have DVI port– an upgraded version of the VGA interface. It can be in three types:

The analog version of DVI-A, which is almost impossible to find, since it is characterized by low image quality, which is due to the need to convert to analog signal digital.

The digital version of DVI-D is perhaps the most common type, differing high quality signal. Two-channel subtype Dual Link provides a resolution of 2560x1600 pixels at a frequency of 60 Hz, and single-channel Single Link – 1920x1200 pixels, a frequency of 60 Hz.

The combined version of DVI-I consists of one digital and one analog transmission channel (Single Link). It can also consist of two digital and one analog channel (Dual Link), which operate independently of each other. In cases where this port is not among the TV connectors, if it is available on the computer’s video card, you can use special DVI-VGA or DVI-HDMI adapters.

3 - HDMI connection. This port is considered the most optimal in cases where the TV is connected to a computer. With its help, it is possible to transmit high-resolution video (up to 3840x2160 pixels) and multi-channel audio using a single cable. Often, TV interfaces have two to three HDMI connectors, making it possible simultaneous connection several devices. Today, the disadvantages of an HDMI connection include the limited cable length (no more than 10 m) and a fairly high price.
The disadvantage of connecting using DVI and VGA cables is that the connectors are screwed together. This means that if someone accidentally touches these cables with their foot, damage occurs to both the TV and the computer’s video card.

When planning to purchase a TV for use as a monitor, you need to clearly understand what scenarios it will be intended for in the first place. So if you plan to actively work with office applications and browsing the Internet, then you can limit yourself to a 32-inch TV. But for gaming or watching videos with maximum immersion, you should choose models whose diagonal is in the range from 36″ to 50.

All answers to the question of whether it is possible to use a TV instead of a computer monitor are positive. However, the resolution of the TV screen, even with the highest indicators - 1920 x 1080 pixels, will be significantly lower than the resolution produced by the monitor of 2048 x 1536 or more. Although the loss of resolution is compensated by size.

On a large TV screen, any image looks more colorful and impressive. That is why many computer owners have thought about how to use a TV as a monitor. You can use the TV both as an additional and as a main monitor.

The table shows ( purple) TV resolution. Compare them with the red ones (possible computer parameters).

Most likely, if you switch from a 19-inch monitor to a 40-inch one, you will experience discomfort after changing the monitor, your eyes may ache, or you may experience severe headaches and fatigue.

That is, you must immediately understand that sitting down at a 40-inch LCD TV, at a distance of less than 3-4 meters, you are simply doomed to pain in the eyes. With 90% certainty the capillaries will be inflamed, which in turn will be accompanied by a kind of pain in the eyes, naturally the eyes will be red, plus headaches.

In practice, it is not always advisable to use a 40-inch TV for a PC, unless, for example, you are professionally involved in 3D, where you need a lot of working space, there are not very many other significant reasons for such a step, well, perhaps:

• I want to play on the big screen, but here alternative option will buy a console, and already play on it at a distance from the TV of more than 5 meters
• I want to watch HD, it is better to collect NTRS and use it exclusively for viewing videos and images. Alternatively, install a media player.

And for playing on a computer, a monitor with a diagonal of 19-24 inches is quite enough. This is really quite enough to play with a sufficient level of pleasure, and so as not to doom yourself to further discomfort due to poor eyesight, and as a result of this - wearing glasses. Perhaps wearing glasses gives solidity, but does not create convenience and comfort. .

An LCD TV is not a replacement for a monitor, but a completely unnecessary exaggeration, unlike what your eyes want. In general, if you feel sorry for your eyes, then we do not recommend changing your monitor to a large TV, especially if you cannot be at an acceptable distance from the TV, preferably more than 4 meters. Well, if the distance allows, then you can try.

Today modern residential complexes and LED TVs almost completely replaced television receivers with a cathode ray tube, or simply a kinescope. Modern TVs are distinguished by high quality image and sound, but in addition, LCD and LED TVs are perfect for use as a monitor.

Advantages and disadvantages of connecting a TV to a PC

1. Their matrix allows you to work quite comfortably with any applications, watch movies from the Internet on wide screen and play, view photos and content social networks, as it does not create flicker and does not harm vision.
2. In addition, purchasing an LCD TV as a computer monitor is quite beneficial from an economic point of view. You can watch TV channels and work on a PC without buying a separate monitor for it.
3. A television receiver connected to a PC can be used as a signal source for recording broadcasts to the computer’s hard drive.

But this is where the advantages of using a modern TV as a monitor end; let’s move on to the disadvantages, the main one of which is different size pixels: on a TV they are larger, and on a monitor they are correspondingly smaller. This is why the image quality from the PC will not be as rich as it could be on the monitor. Besides:

1. If the TV resolution is less than 1920 x 1080, the clarity of the image deteriorates significantly and the angularity of the fonts can be seen.
2. Many budget LCD TVs have low matrix response. Any fairly dynamic content on such a device will not look very correct.
3. A widescreen TV with a large diagonal will also not work for surfing the Internet. good choice. For normal review, you will have to work with such a device from a long distance.

However, many people are interested in how to connect a computer to a TV and use it instead of a monitor for playing games and watching movies.

Video adapter requirements

The video card must be equipped with two connectors - this is the most important requirement for it. As a rule, most video adapters have 2 VGA connectors or a combination of VGA and DVI connectors, but more modern ones have a pair of high-speed HDMI digital interfaces. However, depending on the manufacturer and model of the video card, the combination of connectors may be different.

Let's take a closer look at the connection external screen instead of a monitor, via a VGA cable, since all video cards and more than 90% of television receivers are equipped with this interface.

Connection and configuration process via VGA interface

Connecting a computer to a TV begins with purchasing the necessary VGA-VGA cable at any store computer components. As for the cable length, it is better to take 1.5 distances from the required one. In case of furniture rearrangements, repairs, etc. you don't need to disconnect your PC from your TV or buy a new cable.

As a rule, connecting a TV to a computer via a VGA interface is not difficult, even inexperienced user. If everything is in order with the equipment and cable, the TV as a monitor should work immediately.

Only the image is transmitted via the VGA cable. To connect audio, use an audio cable, connecting it to the output sound card and television receiver.

Connection and setup process via HDMI interface

This is the most suitable option, since digital interface HDMI carries audio as well as video, so no additional audio cable is needed.

Sound problems

Despite the fact that not only video, but also sound is transmitted via the HDMI interface, it often happens that the sound is coming from the PC speakers, but is not transmitted to the TV. The most common reason is settings.

After this procedure, the sound will come from the television receiver and not from the PC speakers. So in a simple way you can always connect your PC to your TV. Good luck with your purchases and enjoy your viewing.

Computer monitors are best suited for work, and special models with high frequency used by eSports athletes. However, their resolution is limited, which often raises the question of connecting a TV. Watching a movie or playing your favorite game on the big screen is much more comfortable. Let's take a closer look at whether it is possible to connect a TV instead of a computer monitor and how to do it.

Is it possible to?

It is possible to connect a TV. The only question is the available connectors on the computer and screen. You just need to get the appropriate cable. An adapter may be required.

There are two scenarios for using a computer together with a monitor. The first is for image output, which is available even for older models with a kinescope. And the second is to use it as a storage device. Works only with modern TVs with their own player.

Note that the TV can be used instead of a monitor, as well as in conjunction with it. Video card manufacturers equip devices with several connectors for connecting two or more screens. If the video card is budget and the number of connectors is limited, but the processor has a built-in video card, you can connect to the motherboard.

Advantages and disadvantages

The benefits of using a TV instead of a monitor come from large sizes first. Watching a movie or playing your favorite game on a 48-inch TV is much more convenient, not to mention larger models. Even 32 inches will look better than the usual 19-inch monitors.

The following disadvantages can be identified:

• A large TV is completely inconvenient for work.
• TV with good resolution and the matrix is ​​much more expensive than the monitor. Resolutions below FullHD will not provide a clear picture.
• Often low frequency Frame updates limit the use of the monitor for gamers.

It is best to use a TV together with a monitor, getting the advantages of each.

What to connect through?

There are a wide variety of methods and connectors for connecting a TV instead of a monitor. However, many of them are outdated: modern and relatively modern computers and televisions are no longer present. The most common ones include the following:

• HDMI;
• DisplayPort.

Let's take a closer look at the connection features for each.

VGA

This is an analog signal and is considered obsolete. On modern video cards you won't find him anymore, just like on motherboards. However, it still often occurs on TVs, monitors and systems manufactured before 2015. Capable of providing images with FullHD resolution.

To connect to a computer we use VGA-VGA cable. It is compatible with DVI, for which you just need an adapter. However, pure digital DVI-D and HDMI will require an active adapter. It is noticeably more expensive, has limitations in picture quality and resolution as VGA, but can be used.

After connecting, if the TV does not automatically display an image from the computer, you will need to select a source. On the remote control, this menu usually corresponds to the input or source button. Next, all that remains is to adjust the screen resolution.

DVI-D

Analog types DVI connects in the same way as VGA and has similar characteristics. The digital version has best characteristics and is capable of providing resolutions up to 2K. Not found on all devices, as manufacturers prefer HDMI. Compatible with analog inputs only through a special adapter.

HDMI

This is a modern connector that receives and transmits digital signal. With analogue ones, for example, VGA, it works only through an active adapter that converts the signal.

It occurs frequently even on older devices. It is capable of high-quality transmission of not only video, but also sound. Allows you to connect a TV instead of a monitor. Supports 4K resolution. The image quality is considered the best.

To connect you will need HDMI-HDMI cable. It is also possible to use mini-HDMI. This is simply a smaller version, most often installed on mobile devices. An adapter can be used.

It is worth noting that even inexpensive Chinese cables capable of producing juicy and high quality image. However, if the filter Low quality, can catch interference. If you notice them after connecting, most likely the problem is in the cable and you should not blame the screen or system.

Important! Before connecting, turn off both your computer and TV. Never plug or unplug a cable from a running device. In such cases, the entrance often burns out.

After connecting to the TV, select the signal source, adjust the image and enjoy the picture. If you cannot set the required resolution, update or install the driver for your video card.

DisplayPort

This is a direct competitor to HDMI. Allows daisy chaining a large number of monitors. For this reason, high-performance video cards are equipped with them, for example, some contain up to 6 such ports. The connection procedure and features do not differ from HDMI.

The only difficulty with this input is that video cards are equipped with them, but they are not so common on monitors and TVs. This is worth paying attention to.

USB

Through this port, you can transfer video in two ways: using a computer as a drive, together with a player on a TV, or with a DisplayLink adapter. The latter is only suitable for USB versions 3.0 because 2.0 doesn't have enough bandwidth.

This method has no advantages over those described above; it requires an expensive adapter, but is mentioned as an alternative.

Using two screens

We found out whether it is possible to connect a TV instead of a monitor. Let's look at a situation where you need to use both devices at the same time.

There are two scenarios for using screens. Firstly, there is duplication. Same image displayed immediately on both the monitor and the screen. In this case, the second device, if it is on this moment not the main one, just turn it off.

Secondly, use one screen as a continuation of the second. The images on them will be different, depending on what is placed on them. This way you get an enlarged desktop with two separate zones, which, however, can be linked. Note that it is possible to use two screens at once independently of each other, as if they were connected to different computers. However, the setup process is very labor-intensive and requires a powerful processor.

Setting up your TV is very easy. On the desktop, right-click and select "Screen Resolution". At the bottom we will see the item “Multiple screens”. Click on it and select the required scenario for using the monitor.

Now we know whether it is possible to use a TV instead of a monitor. It is possible, and it can be done easily and simply. Simply connect it via an accessible connector and configure it in the same way as a monitor. By using both screens in pairs, you can get the benefits of each without the associated limitations and disadvantages.

Using a TV instead of a computer monitor allows you to watch movies, TV series, and play video games on the big screen. The advantages are obvious - maximum detail images, impressive TV diagonal, wide range colors. However, how exactly do you connect your TV to your PC? Not all users know this. Therefore, now we will consider several proven methods that allow you to set up such synchronization.

What is better: monitor or TV?

Before moving on to considering connection methods, you must first decide what is better for a computer: a monitor or a TV? To answer this question, you need to clearly formulate the evaluation criteria computer monitor and TV. The first criterion is convenience. Let us immediately note that monitors are much better in this aspect. This point view is explained by several arguments:

• It is not possible to adjust the height or angle of the TV. This causes certain inconveniences. This drawback can be mitigated by placing the TV on the wall on a universal bracket. However, such a design will take up an extremely large amount of space. Not all users have the necessary free space in the room;
• The TV is much heavier than the monitor, and it also takes up much more free space. Therefore, if you have a miniature computer desk, then placing a 40-inch TV on it will be very problematic.

If we're talking about correct position, then the distance from the computer screen to the user should be approximately 50 cm. If a TV with a diagonal of 30 inches or higher is used, the distance should increase. Otherwise, the user will not be able to look at the entire display plane.

Dynamic scenes create additional stress on the eyes. Therefore, it is advisable to increase the distance. By technical specifications: color palette, set of functionality, resolution, refresh rate, superiority belongs to TV.

The best option is to purchase a TV with a diagonal of 26-27 inches. The screen resolution should be in the range of 1920x1080-2560x1440 pixels.

Selecting a screen type

Today, manufacturers use only two display manufacturing technologies - liquid crystals and plasma panels. The latter option is gradually losing relevance due to its short service life. Therefore, LCD displays are the first choice for all users.

Usage plasma TV as a PC monitor is not the most forward-thinking solution. Liquid crystal matrices can provide more a high resolution screen, which is reflected in the image quality.

Of course, you can remember TV with a CRT tube, but they are a thing of the past. Therefore, it makes sense to focus on liquid crystal models. Analyzing the pros and cons of all types of screens, it must be said that the production volumes of laser TV are gradually increasing. However, this is still an experimental technology. The effect of laser displays on human vision has not been 100% studied.

Liquid crystal technology also has several subtypes. The specifics of the backlight operation mainly change. Each manufacturer supplies its products with branded features. For example, Samsung TVs– this is first of all. Which to choose better option? It is impossible to answer this question without context. You need to know what the purchase budget is, for what purpose the TV is purchased, etc.

Connecting your TV to your computer

There are several ways. Conditionally everything available methods can be divided into two categories:

• wireless – creation local network, direct connection via Wi-Fi, using special adapters;
• wired – connecting the TV to a computer using a cable and available interfaces: HDMI, VGA, DVI.

Important! Not all interfaces are capable of simultaneously transmitting audio and video. Therefore, some users have to use additional wires to play the audio signal.

How to connect TV to PC? Each of available options has its own strengths and weak sides. The final choice should be made in accordance with available interfaces And functionality TV. For example, if the model you are using does not support Wi-Fi, but is equipped HDMI interface, then it’s definitely worth using it.

Via HDMI or Displayport

The HDMI interface was created for use in consumer electronics. This connector is used to connect game consoles, players, projectors and other equipment. main feature interface in question is that it transmits a high-quality video signal and clear sound simultaneously.

Displayport was invented by VESA. This input is intended to improve, and not become an analogue of HDMI. It is Displayport that can be called the final interface for connecting equipment to a computer.

For some reason, many manufacturers do not equip laptops and PCs with a Displayport connector, which is negative point. Preference is given exclusively to HDMI. Today such a port can be found on all types modern technology. Although Displayport functionality is slightly better. It is especially worth noting the extensive package of options that will be of interest to business users.

If you want a laptop with a separate screen, then it makes sense to pay a little extra to buy a model with Displayport support. As a result, the user will gain greater flexibility that HDMI cannot provide.

Instructions for connecting a TV to a computer via HDMI:

1. Insert one plug of the cable into the computer connector, and the second into the TV port.
2. Take the remote control remote control, and click on the button "Input", and then select the main signal source "HDMI".
3. The TV screen will begin to blink a little, and after a few seconds the computer desktop will appear.

It is possible that after the first connection, displayed on big screen the picture will not be displayed correctly. The problem can be easily resolved by setting up the PC accordingly. Right-click on empty space desktop. From the drop down context menu you need to select an item "Properties". Switch to tab "Options".

Click on the button "Additionally". Set the resolution to suit your TV. The image will be displayed correctly. The essence of setting up a Samsung TV or a device from any other manufacturer comes down to the fact that the user sets the highest screen resolution.

What should I do if, after connecting, the TV is not detected automatically? You need to press the button "Find". Wait until the search is completed. Install the most great importance screen scan. to do this, switch to the tab "Monitor", and then select « » .

In chapter "Setting up screens" each can be assigned a serial number. 1 is the main one, and 2 is the additional one. Click on the key "Define". The number 1 will appear on the TV screen, and 2 on the computer monitor. To make changes, you need to go to the section "Screen resolution", click on the second screen, and then check the box next to “Set as primary monitor”. When all this is done, be sure to save your changes.

To make the most of flexible setup, you need to open the properties of the video card, and then set the desktop resolution and perform color correction. For the changes to take effect, be sure to restart your PC.

What to do if the TV does not play sound? The problem is solved by carrying out system settings. You must select your TV as the default playback device. Instructions:

1. Right-click on the speaker-shaped icon located in the lower right part of the screen - notification panel. Select an item "Playback Devices".
2. The window that opens will display a list of connected devices, for example, "Speakers" And "LG TV".
3. Right-click on the name of your TV. Select a team "Use as default". Click "OK" for all changes to take effect.

That's all you need to know about connecting your TV to your computer using the HDMI interface.

Using DVI and VGA

Practice shows that all TVs and PCs are equipped with one of these interfaces. If you compare them, it is better to give preference to DVI. The VGA connector is considered quite outdated, so it is used only in the most extreme cases. Let's imagine that you decide to set up synchronization via VGA. However, the monitor is turned on through the only free connector. What to do?

You can purchase a special adapter - DVI to VGA. This adapter allows you to transform the video card connector into an additional VGA input. Remember that the interfaces in question only transmit video signals. Therefore, in addition to the DVI or VGA cord, you must use a special audio cable with 3.5 plugs at both ends.

The 3.5 plug is a standard connector used in classic computer audio systems: headphones, speakers, etc. There should be no problems purchasing this cable. Cords are available for purchase in stores computer equipment and electronics.

Connection instructions:

1. Insert the cable plugs into the appropriate connectors on your computer and TV. Connection diagram – DVI-DVI or VGA-VGA (depending on the connection type).
2. Insert the plug into the audio output of the TV. The interface is marked "Audio-In". Use a dedicated audio cable.
3. Turn on your PC and TV. Set the VGA or DVI interface as the main signal source in the TV settings. To enter the signal source selection menu, press the “Input” button on the remote control.

To use your TV as a computer monitor, you need to extend your desktop. The algorithm for performing this procedure will depend on the operating system used:

• Windows XP - Right-click on an empty space on the desktop. From the context menu, select "Properties", and then go to the "Options" tab. You need to choose the most high resolution screen;
• Windows 7 – right-click on an empty space on the desktop, and then select “Screen Resolution” from the context menu.

Once the screen resolution is set, you can play the content.

Via Wi-Fi

Smart-TV models are equipped with a hardware module for wireless connection to the Internet. Therefore, the easiest way is to home Wi-Fi networks. For this you will need a router. Some models are not designed for wireless Internet connection. The problem is solved by purchasing a special adapter. You can also set up synchronization between TV and PC without a router.

Wireless synchronization is carried out using one of two technologies – Miracast and Intel WiDi. The advantage of this connection is that the user does not need a router. If you are using a laptop with a central Intel processor third generation or older, as well as built-in Wi-Fi module and a graphics chipset from this manufacturer, which means the laptop supports WiDi technology. It is important that your PC has an operating system older than Windows 7 installed. To set up synchronization with modern TV, download to your computer Intel utility Wireless Display.

Laptops that are sold with a pre-installed Windows 8.1 operating system predominantly always support Miracast technology. It is important that the wireless connection technology is also supported by the TV. Modern models come with built-in Miracast support. Alternative way– purchase of a special adapter.

Connection diagram:

1. On TV you need to activate the technology wireless synchronization– Miracast or WiDi. Experience shows that this option is enabled by default. On TVs from Samsung the function in question will be called « Mirror reflection screen".
2. To connect equipment via WiDi, you must first download it to your computer software Intel Wireless Display. Find a team « Wireless monitor» . During the connection, a security check will be carried out; you need to enter a code that will appear on the TV screen.

To use Miracast technology, open the "Charms" panel in the operating room Windows system 8.1. Move your cursor to the lower right corner, after which it will appear on the screen. Select the "Devices" section and then "Projector". Click on "Add" wireless display" If this command is unavailable, it means that your TV does not support Miracast technology.

Over local network

Over a local network, the screen is configured using special software. The user needs to download and configure the DLNA server. IN free access There is plenty of high-quality software. For example, . We will use it as an example.

Once the software is installed on your computer, you need to make certain changes to the settings. The TV must be connected to the PC using a LAN cable. Turn off the TV first. Instructions for setting up a local connection:

1. Launch the software.
2. Go to "Settings", and then select the section "Devices".
3. Click on the button "Search".
4. When the scanning is completed, a list of available devices will appear on the screen.
5. Select your TV after confirming the connection to the media server.
6. Open the item again "Settings", to choose "media resources".
7. Click on the button "Add" by specifying the folders hard drive, which will be accessible to TV.
8. There is a folder at the bottom of the window "My computer", you can select everything at once local disks Winchester.
9. Now all of the content will be available for viewing on TV. file system PC, click "OK" to start scanning.
10. Open the media server by clicking on the button "Launch" in the main menu of the program.

Synchronization setup is complete. Now let’s analyze the features of playing content on a TV that is stored on the PC’s hard drive. Turn on the equipment, and then open the program on your computer « Home media server» . Run multimedia server by pressing the key "Launch".

An Internet cable was already pre-connected to the TV via the LAN connector. Open the list of signal sources to select "LAN". The menu is opened by pressing the button on the remote control "Source" or "Input". Explorer will start, using the remote control, switch between folders and play the necessary content.

Setting up to use your TV as a computer monitor is far from the most difficult process. To achieve results, you just need to follow the instructions described above. The choice of connection method is carried out in accordance with the functionality of the equipment.