Oculus rift dk2 connection. How to set up and turn on Oculus Rift DK2

You are the proud owner of a set of glasses Oculus Rift dk1 congratulations on your good purchase!

STEP 1

Open the case, unpack it, and take out the device.
-Connect the HDMI cable to the video signal receiver (Control Box), connect the other end to your computer video output (if necessary, use DVI adapter).
- We carry out exactly the same actions with a USB cable. ( mini USB to Control Box, USB to your computer)
-Don’t forget to connect the power to the 220V power supply by selecting the desired plug for connection!
-Press the power button on the Control Box and the blue light should light up.

STEP 2

Go to the address and register.

https://developer.oculusvr.com/register

After registration, you will receive an email in which you need to confirm your registration by clicking on the link.

Download the Oculus Unity Tuscany Demo from the Downloads section for your system shell.

Then we unpack it from the archive. There are two folders in front of you, one of them contains settings. Another with a demo.

Open the first folder OculusConfigUtil (Glasses must be connected and turned on!) and run the file OculusConfigUtil.

We create our profile (Select your gender, your lenses installed in the Oculus Rift), then you need to calculate the distance between the pupils - the IPD parameter.

We click the start button and in front of us is an application that will help you find out the necessary data. We put on glasses, click Next three times. When a green line appears on the screen on the left, close your right eye and move this line until it becomes barely visible to the left eye. A line will then appear in the center of the screen. With the right eye closed, we move it to the border where the left eye begins to barely distinguish it. Next, both operations, but with the left eye closed. Next, we accept our calibration and close the application. If everything is done correctly, then the value in numbers will appear in the column opposite IPD

(Write down this parameter, as some games will require you to enter it).

You can check that the settings are correct by running Launch Interactive Utility in the same program.

If you are not the only one who will use these glasses, you can create a lot of additional profiles.

After that, open the second folder with a demo game that will demonstrate to us the capabilities of Oculus Rift glasses.

Glasses virtual reality are no longer the inventions of science fiction writers. In 2013, the first copy was released. People liked the product and developments in this area are progressing by leaps and bounds. Virtual reality is closer than ever and can now be seen and heard. However, new technologies require new skills. Therefore, most people are faced with the question: how to connect Oculus Rift?

In fact, there is nothing complicated in this process. Included with each glasses recruitment is underway adapters and installation instructions. But there are situations when standard instructions do not help. Therefore, you need to go through all the stages of connection and all possible difficulties point by point.

How to connect Oculus Rift to your computer

A step-by-step analysis of the connection will allow you not only to solve the problems that have arisen, but also to connect the glasses if the instructions were lost.

• First you need to connect your virtual reality glasses to your PC. To do this you need to use an HDMI cable. If the connectors do not match, then you need to use the adapter included in the kit.
• Now you can connect the USB cable. He will feed the points. It is necessary to disable the power saving mode so that the computer can supply power to the connectors.
• The next step is to connect the camera, which should be mounted on the monitor. There is nothing unusual about her connection. It connects with one wire to the PC, and with the second to Oculus Rift.
• After the manipulations have been completed, one of the two lights will light up. Blue indicates that everything is connected correctly and the video signal is being received. Orange indicates that there is power, but no signal. To fix this, just turn the glasses off and on. The power off button is located next to the indicators.
• Now you need to install drivers for Oculus Rift. They can be downloaded from the official website. It is worth noting that a disk with installation software is not included. Therefore, an Internet connection is required.
• After installing the drivers, the following situation may occur. Virtual reality glasses will not be detected new program. There are 2 ways to solve this problem. 1. Restart the PC and independently open the program, which is located on the disk with the system in the Program files directory. 2. Terminate the process manually through the task manager. After that, run everything in the manual program as well.
• After correct launch programs, create and fill out a profile.
• You have to choose a display modification. As they say experienced users, it is better to select the second item (Extend desktop to the HMD). It is more reliable, and the first option is subject to failures and disturbances during image transmission.
• After this you can start demo mode. It will allow you to configure virtual reality glasses in operating mode.

As seen, Oculus Rift installation is extremely simple and does not require special knowledge or skills. And using this sequence you can speed up the process to 15-20 minutes.

And this great way continue to use your usual store and environment with a new gadget, but this is not the only way. By going through this short 4-step guide, you can quickly set up your Oculus Rift to work with the library Steam applications and SteamVR.

Valve wants Steam and SteamVR to be the only sources of content for all your virtual reality devices. Although base device The company's VR software platform includes HTC's Vive headsets, and it also supports the consumer Rift and even the developer's prototype DK2. Let's see the easiest way to do it so that you don't have to buy two pairs of glasses.

Step 1: Make sure Rift is installed correctly

To begin with, it’s worth eliminating the most basic, and therefore unnoticeable, error and making sure that the virtual reality glasses are correctly connected and configured. If you haven't already done so, download the Oculus Home software, which will help you set up your glasses the way their manufacturer recommends. Actually, this way you can easily configure them for Home itself. After all operations, launch the client and check its functionality.

Step 2: Activate " unknown sources"("Unknown Sources")

Turn off your headset and turn your attention to the Oculus desktop app. Click on the gear icon on the right top corner to go to settings. From the menu on the left, select “General,” check “Unknown Sources,” and click “Allow.” Don't close the application.

Step 3: Install SteamVR

Run Steam client(if you don't have it, download it). If you don't see an automatic pop-up asking you to download SteamVR, go to the Library > Tools and install SteamVR from the application list.

Step 4: Launch SteamVR

After installing SteamVR, you will see a VR icon in the top right corner of Steam next to the maximize and minimize window buttons. Click this button to launch SteamVR. Your Rift should now be detected by the program, and you should put on the headset and see the virtual reality interface in front of you. (Note: Home app should work in background). The back button on the controller that came with the Rift will open a menu.

How to find games for Oculus Rift on SteamVR?

Many virtual reality lovers have repeatedly wondered how to use Oculus. First you need to download software part for connection, which can be obtained from the official VR Oculus website. After quick registration There you can access the developer center. The Downloads subsection contains the software components we need.

In the event that you are only going to test content for virtual glasses Oculus reality Rift, download only installation program. If you want to connect to Oculus computer Rift and develop games, you will need to download the SDK Source.

After installing the programs, find the wire to connect to the USB and HDMI ports. It is paired and is located next to the helmet mount. USB works with USB ports 2.0 and 3.0, however, some users had trouble connecting the helmet to USB 2.0. If this happens to you, switch your virtual reality glasses to a different type of USB.

In addition, in the device manager, remove the options to turn off the power supply in USB connectors to save energy. The HDMI cable can be connected either directly or through a special DVI to HDMI switch, which is also included in the kit.

On the side of the camera is USB port and a synchronization cable, which connect to the connector located on the wire of the virtual reality glasses. Place the camera in front of you, on top of the monitor. Move up to one and a half meters away.

The camera has a special fastener that makes it easier to use. A special indicator will light up after the device is connected. If he will orange color, this will indicate that the helmet is connected, but no signal is being received. If the indicator lights up blue, the helmet is successfully connected and is ready to receive a video signal. Near the indicator you can find the on and off buttons.

Many people don’t understand how Oculus Rift dk2 connects because they haven’t configured the software. When connected, the Oculus Rift virtual reality helmet is automatically calibrated in the OculusConfigTool program, after which you need to launch a special demo by clicking on the Snow Demo Scene button.

This program is used to personalization helmet and camera. It is this scene that provides users with their first impression of using Oculus 3D glasses. After launching the application, the user finds himself in a virtual room with a ceiling and floor painted blue.

A panel with the company logo and the inscription “Start” will hang in front of you. Use the mouse to activate it and find yourself at the table. There will be many objects on the table that you can get closer to using a camera that tracks your movements.

Don't forget that the camera has a limited view, so don't bend too low or go beyond its range. In order for it to work correctly, you should be at a distance of 1.5 meters from it. If everything works well in this demo mode, the helmet setup is complete.

Not so long ago, setting up Oculus dk2 for Windows 10 was almost impossible, but over time this problem was solved. After connecting the helmet as usual, download the Runtime program at developer.oculus.com.

After installation, click on Start Download, after which the application will be saved to your computer. If you tried to install it before, remove all earlier versions. After that install new version and log into your Oculus Store account. Ignore the notification that the computer is not suitable for startup - it is not.

Connection early version Oculus glasses are produced in exactly the same way, only several sets of lenses are supplied: for ideal vision, low and high myopia.

After you have inserted the lenses, use the mechanisms on both sides to adjust the distance to your eyes. They are configured separately from each other, so this can be done individually. Next, download drivers and utilities from the official website. Then do the following:

1. run OculusConfigUtil;
2. create new profile and indicate the version of your lenses;
3. calculate the distance between the eyes and the lenses and calibrate;
4. run the demo version.

Instructions for connecting Oculus Rift CV1

First you need to use HDMI cable and several USB cables to connect and install Oculus Rift CV1 sensors. After this, it is necessary to place the sensors and draw the lines of the playing area so that there is no foreign objects or furniture.

14.04.2015 7 248 0

1. To operate the Oculus Rift device, you must:
Connect the HDMI connector. Standard set supplemented with a DVI-HDMI adapter. It can be used. The helmet functions well with and without an adapter. Provides connection to USB connector 2.0 and USB 3.0. Sometimes it's possible incorrect work, associated with a problem in supplying voltage to the device. If this happens, try changing the port. To check the settings, you need to log in through the manager and check initial settings(saving power supply to USB ports must be excluded).

After connecting the camera, install it on top of the screen directly in front of you, at a distance of 1.5 m. For reliability, use a special mount.

There are wires on the helmet with a connector to which two wires (USB and sync wire) coming from the camera are connected.
2. After this, the blue or yellow indicator light on the helmet will light up.

The LED indicates correct connection. If this is lit yellow– this means there is no video signal.
The manual feed or power off button is located next to the LED.
3. The helmet must be turned off if it was powered.
4. Installing drivers for Oculus Rift, the next step. They must be downloaded first.
5. After installation software The device may not start automatically. This depends on the OS installed on the PC (OVRServise_x86 or OVRServise_64). To do this, manually run the setup (close the Oculus Config Tool process). Go to the folder C:\ Program Files(x86)\Oculus\Servise (default). Only after automatic or manual start, the helmet will be determined and it will be possible to configure it. Otherwise, the OculusConfig Tool will not be available.
6. Restart OculusConfig Tool will allow you to see the following:

7. In the window that opens, create a profile, fill in the anthropometric data and lens option (type A by default).

8. The helmet may not receive video signals in Direct HMD Access from Apps mode. The reason is not clear. Despite this, it allows full functionality in Extend Desktop to the HMD. Only in the second mode most applications are launched.
To go to Extend Desktop to the HMD, you need to select the following item, see the figure:

9. The demo version is available after synchronization is completed. Operation of the entire device is possible in the OculusConfig Tool. When you press the “Show Demo Scene” button, the helmet calibration will begin.
10. Demo starts, then left-click “Start”, you should get the following image:

Position– (position) Sit | Stand.
Camera Bounds– (camera boundaries) On | Off.
Position– your location relative to the workplace (virtual and real).
Camera Bounds– indicates the frames of the camera’s perimeter and activates them.
The basic settings have been completed after activating the demo mode.

Proceed to install additional settings:
After switching to Extend Desktop to the HMD mode, the system will start working in extended desktop mode. Change the screen orientation for the Rift DK2 to portrait (default is landscape). Until then, you will see an upside-down image.
The design of the helmet uses a display from Samsung designed to convey a portrait image.

For correct display, you need to change the location of the screen image for Oculus Rift to the far left. This must be done in order to prevent accidental capture of the monitor screen display when expanded to full screen.

When launching the application via Direct to Rift EXE (if possible), make sure that the helmet is in advanced mode.

For a full deployment, you can launch Demo in a separate window, then simultaneously press the Alt and Enter buttons and double-click the right mouse button.

If the Demo option does not work, then:
1. After creating the shortcut, add -adapter 1.
2. Run as administrator.
3. Run the “full” file with exe permission.
4. After Virtual installations Desktok can be opened using "Open with Oculus Rift" ( right button mice).
5. Restart. Oculus Servise – manually or Oculus Servise Manager – additional prg.
6. After creating the shortcut, add -force-d3d11.