The iPhone is charging but won't charge. iPhone won't charge: what to do? iPhone parts are broken

IN Lately iPhones are increasingly gaining popularity; they are fashionable, stylish and sophisticated. A bunch of various applications, beautiful design will not leave anyone indifferent. But even such a beautiful thing can have its own problems, which it is better to know about in advance. For example, many users complain that the iPhone does not respond to charging and does not turn on. Similar problems do not arise out of the blue, usually difficulties begin to arise after the phone is dropped or drowned in liquid.

Why is the phone not working?

If the iPhone does not turn on, the reasons may be the following:

Discharged to zero. To resume operation, you just need to connect it to the power cord and wait 15 minutes. After that, you can try to turn it on. If the iPhone does not turn on after charging, then you should look for another problem.
If after 15 minutes the phone does not load, and lightning and a socket appear on the screen, then not much time has passed since charging.
If your iPhone turns off and won’t turn on, and doesn’t respond to charging, what should you do? IN in this case The iPhone just went into save mode. This happens if it has not been rebooted for a long time.
To resume the device after a reboot, you must press and hold the lock button and the Home key for 20 seconds. After this, iOS will begin downloading.

Important: if you have an iPhone 7, then in order to resume its operation, you need to hold Power button and the volume down button for 20 seconds. This will result in a hard reboot of the device. This usually helps with many problems, including iOS glitches.
If the iPhone does not turn on and does not charge, it means that the device is simply frozen. To solve this problem, it will be enough to reboot it.

iPhone doesn't work, screen is dark

The option when the iPhone turns itself off, does not respond to charging and then does not turn on is quite common. This all happens because the iPhone was left unneeded for a long time, while its charge was full. After this, the phone turned off and will not turn on again.

If your iPhone has a black screen and won’t turn on, there may be several reasons:

Water getting inside the case, as a result, oxidation of the contacts and failure of the modules.
The iPhone falls, as a result, the cable comes off.
As trivial as it may seem, severe frosts can damage the gadget. As a result, the iPhone stops not only charging, but also turning on. In order for the system to work, you will need to warm it up; it will be enough to put the device in a warm place for 15 minutes.
It is also possible that the iPhone is dead and a black screen appears. If the iPhone is completely discharged, the device may not turn on or charge. What should you do if your iPhone is charging and doesn’t turn on for a long time? Reading
If your iPhone won't turn on even after charging? You need to press the Lock and Home button. Hold them in this position for 20 seconds, then wait about a minute. At this time, the BIOS should start, the system will work, and iOS will begin loading.
If the iPhone screen goes out, the phone is discharged and does not turn on when charging, the problem may be a breakdown of parts of the device, failure charging cable, malfunction of the charger itself.

What should you do if your iPhone stops working, its screen goes blank and won’t turn on? There is no need to panic, there is a way out of every situation.

If the iPhone is charging, but it turns off and doesn’t even turn on. In most cases they work the following actions: Simultaneously press and hold the “Power” and “Home” keys for several seconds. Hard Reboot helps in many cases. After this, the mobile device should work like new.

If after these manipulations the mobile phone does not turn on even when charging, the problem may be more serious. If the iPhone does not respond to any actions, it means there is a hardware or software error. For the mobile phone to work, you will need to change the battery or Charger. In any case, the help of a specialist will not hurt.

The phone has stopped charging and will not boot

There are many reasons why your iPhone won't turn on or charge.

System failure. In this case, the iPhone does not charge and does not turn on as a result of rebooting random access memory what's stopping him full-time work. The system cannot cope with all the information and mobile device starts to fail. In order to fix this situation, you will need to reboot the entire system.
If the iPhone does not turn on even after rebooting, then the reason is clearly different.
Mechanical damage to the mobile device. With a strong impact iphone battery may come off the body. At first, the device may not work at all, and the sound of a dangling battery will be heard. Next, the cable that connects the battery and the board breaks. After this, the mobile does not turn on and does not respond to charging. To solve the problem, you will need to replace the battery.
The use of counterfeit chargers, which can lead to the iPhone turning off and not turning on and not responding to charging. Due to low-quality accessories for mobile devices, voltage surges or moisture may get inside. In this case, the charging connector will also suffer.
The iPhone may run out of power and no longer turn on or charge due to damage to the chips. Along the chain, all the microcircuits of the device begin to be damaged, leading to a complete loss of functionality. In addition to the fact that the iPhone turned itself off, and then did not turn on and charging in progress, he constantly has no cellular connection.

It will be very difficult to solve such a problem on your own; special equipment will be required. This will require the help of a service center or the hand of an experienced technician.

The phone is completely dead

What should you do if your iPhone is completely dead and won’t charge? If the iPhone does not turn on after being fully charged, then you need to put it on charge and wait at least 15 minutes. If after this time the iPhone does not turn on while charging, what should I do? You need to wait a little more, some models require half an hour to resume the system.

What if mobile phone has not been charged for a long time and now does not turn on, you can resume its operation in the following way:

Leave it to charge until the battery symbol appears on the screen. This may take long time. If after a day the mobile screen does not light up, then the battery will need to be replaced.
If your iPhone won't charge, then the problem is in the cable or cable.

Phone won't charge

Everyone understands that if the iPhone does not charge, the battery will soon run out and turn off. What should you do if your iPhone stops charging and won’t turn on?

Check if there is current in the outlet. This happens quite often, the phone is set to charge, but it does not charge.
Clean contacts. It happens that the iPhone screen goes dark and it won’t turn on. In this case, you need to check the contacts that may have become clogged with dust. Using the needle included with the iPhone, all connectors are cleaned. After disassembling it should work, if this does not happen, then the problem is different.

There are many more reasons why your telephone set Doesn't charge or turn on. Each case is individual, sometimes the mobile phone can work after resetting the settings so that the system works again.

Video instruction

The original iPhone cable has two significant drawbacks: it is very unreliable and very expensive. And, of course, no one wants to pay 1,590 rubles (yes, that’s how much a charging cable made at Apple factories costs) for a cable that a priori will not last long, and therefore many decide to buy a non-original charger.

And having saved a fair amount (prices for non-original cables start from 100 rubles!), the happy user returns home, but bad luck - when he connects his iPhone to a new cable, he realizes that the gadget is not charging and does not sync with iTunes, and a depressing message appears on his screen inscription - " This cable or the accessory is not certified...” What to do in such a situation? Let's find out!

What can I say - for an ignorant user, this state of affairs is, to put it mildly, discouraging. There is a silent question in his eyes - “Well, how did my smartphone even know that I didn’t buy the charger for it in the App Store?!”

And, really, where from? Experts have different opinions on this matter. Some argue that the reason is a cunning mechanism built into iOS that recognizes the original wire by certain “beacons”, others that a special chip signaling authenticity is built into the charger itself. However, one way or another, the fact remains that Apple duly made sure that non-original cables do not work with the iPhone.

Not all non-original cables are equally non-original

However, here’s a paradox: on the Internet there are a lot of users who claim: “I bought a non-native wire and everything works!” In fact, no paradox, just according to the “law” Apple i-devices You can charge not only from cables made directly by the Apple giant - that is, original ones, but also from those made by partner manufacturers - the result is a non-original "part", but it has certification. These charging wires have a special marking - MFI (Made for iPhone).

The quality of products marked with this honorary sign is controlled personally by Apple. And, by the way, from each manufacturer working under the MFI program, Apple receives, so to speak, a “tax.” This fact leads to the fact that MFI chargers are more expensive than those that do not have such markings, but still not as expensive as the original ones. average price to non-original certified cable- 500 rubles.

Where can I buy an MFI cable for iPhone? In general, in any good store electronics. Ask a consultant and they will help you.

What to do if the iPhone does not charge using a non-original cable?

However, back to our problem, the cable has already been purchased and refuses to charge our iPhone or synchronize it with the PC. What to do? Good news! Users have come up with several “cheats” to all seeing eye Apple. We'll tell you about them all.

By the way, how do you know original Lightning is distinguished by its ability to work with a smartphone, no matter which side you insert it in ( this opportunity implemented according to the circuit, a special switch is installed in the cable chip), however, non-native Lightning may not have such an option (the Chinese simply forget to take into account the above-mentioned switch in the circuit), and therefore in order for the wire to start charging, it may simply need to be inserted on the other side.

"Close, close"

In some situations, in order for a non-original cable to start charging, it is enough to do the following:

1 Connect iPhone to a charger or PC - depending on the task - charging or synchronization. 2 When a notification window appears about the impossibility of working with the cable, click on the “button” in it - “Close”. 3 Now you need to unlock the device - the notification will appear again - tap “Close” again and disconnect the wire from the iPhone (do not block it!), and immediately connect it again.

Surprisingly, quite often this strange instruction helps. Are you one of those lucky ones? Then let's try the next method.

Turn off and on

This Tricky Method to Work iPhone with non-original cable carried out as follows:

Turn off the device.
We connect it to a power outlet (if we want to synchronize with iTunes, we connect it to the PC).
We turn on the smartphone and... it's charging!

By the way, if you now pull out the wire and insert it back, charging/communication with the PC will stop; to resume it, the iPhone will have to be turned off again.

Airplane mode

Some users, however, claim that there is no need to turn the smartphone on and off in vain; you can fool it simply by activating the airplane mode. Moreover, sometimes it’s enough to just turn it on, connect the smartphone to the charger, and when, as they say, the process starts, you can turn it off, but more often, you need to keep the airplane mode active the entire time it’s charging.

What are the dangers of using an iPhone with non-original cables?

Unfortunately, the fact that non-original cables do not charge the iPhone or do not sync to iTunes is not the main danger they pose. Hundred-ruble Chinese wires are not made according to standards, and therefore the proper balance of voltages and currents may not be maintained, resulting in best case scenario— The iPhone will take longer to charge and/or discharge faster; in the worst case, the power controller will fail, which will entail very expensive repairs. For the fifth iPhone, such a repair will cost, for example, $100, and this is not a situation where you can fix the device yourself.

However, we will not advise buying the original wire for 1590 rubles. You don’t have to pay a lot of money for the original, but you don’t have to buy it for such an expensive gadget as the iPhone, risking its “health” Chinese cable for 100 rubles - just ridiculous, you must agree. What do we recommend? Stick to the golden mean and purchase a certified cable - acceptable price and quality assurance.

Why won't my iPhone charge using the original cable?

And finally, let's look at another very interest Ask. Sometimes discouraged users ask, “Why did my iPhone refuse to charge from the original cable, displaying the message “This cable is not certified?” The answer is actually simple. Sometimes this happens if the cable is damaged or its contacts are clogged.

Lightning cables, which were first introduced with the iPhone 5, are especially susceptible to this problem. The charging cable for the 4S and earlier models still had a more reliable design. So if your iPhone 5 won't charge from original cable(or, in general, any other model), try cleaning it with a cotton swab and alcohol. If it doesn't help, you'll have to buy a new one. Luckily, you already know how to choose the right one.

Let's summarize

So, if the iPhone does not charge from the purchased non-original charging- this problem can be fixed. However, you need to understand that using a non-native cable can have dire consequences. On the other hand, buying an original wire is not very economical. Our solution - a certified cable with MFI marking - is not expensive and is guaranteed to be of high quality! By the way, do you understand that MFI cables are also counterfeited? So, of course, you should only buy them from reliable sellers!

Hello! Charging iPhone and the problems associated with it - this is perhaps the biggest “misfortune” that awaits the owners apple devices. Well... after forgotten password from iCloud - that's for sure. The website already has a lot of instructions telling you how to charge correctly, what you can do while charging and what you can’t do, etc. But still, new problems keep popping up!

Lately it has just appeared great amount comments with the same problem. Users write that they cannot fully charge their iPhone. He doesn’t want to (or can’t?) - that’s all! Moreover, at first charging proceeds as expected, but then it reaches a certain percentage and everything stops. It's like some kind of epidemic! Let's figure out what is the reason for this behavior? Go!

What could be causing this? In fact, there are only two options:

Problems in the software (the operating system).
Problems with hardware (the Phone is not always to blame).

Let's start with the simplest...

iPhone is not charging fully - iOS system glitch

Nothing is perfect and operating iOS system- not an exception. It may be the reason why the iPhone is not fully charged.

Typical behavior for this case is when the charging percentage reaches 98-99 and freezes at for a long time. It turns out that it’s almost charged, but it’s just a little short of reaching the cherished 100%.

What can and should be done here? Here are some solutions:

Important! Everything listed above is worth trying in any case, even if the charging percentage freezes at lower values - it can help. But if it doesn't help, then...

iPhone charging does not reach 100% - hardware problems

iPhone refuses to charge higher certain values, may be associated with other, more serious malfunctions.

Especially when the charge reaches half or a little more and stops - that is, there is quite a lot “missing”.

There can be two main ones:

As you can see, there are many reasons why the iPhone does not receive a full charge.

And, unfortunately, among them there are some very unpleasant ones. For my part, I can only wish that you fix iPhone battery without resorting to serious actions - assembling and disassembling the device, replacing spare parts, contacting service center etc. Let everything be resolved in much simpler ways!

P.S. In order to increase the likelihood of a successful outcome, put “like” and click on the social network buttons!

P.S.S. Do you have any questions or questions? Tell us in the comments - let's try to figure it out together!

Reasons Why won't my iPhone charge? There are not a dozen of them, and some of them can be resolved without contacting a service center. To save money, it is recommended to first try to fix the problem yourself. Manipulations do not require special skills, just follow the instructions.

One of the most common problems that an iPhone stops charging is a glitch software. The firmware failed and this condition is completely fixable. The smartphone has a special controller; its main task is to recognize the charging connection and control the procedure. Its function is entirely dependent on the software component and, if there are any failures, there may be a problem with incorrect recognition of data from the sensor.

To start charging, you must send the appropriate command to the controller, otherwise power will not even be transferred to the battery. Frozen software can cause various problems with the battery display in the notification panel.

Most users manage to fix the problem by simply rebooting the device. A radical reboot is caused by simultaneously pressing the Home and Power keys. The hold duration is 30 seconds. After a reboot the problem may be resolved.

If the failure is caused by a more serious software error, have to .

What to do if your iPhone won't charge due to a dirty port

iPhone 5 and other models often do not charge due to simple hit dirt in the charging port, the main difficulty is that debris is not always visible visually. The conclusion is obvious - you shouldn’t carry a smartphone in your pants or trouser pockets, where all sorts of garbage constantly ends up.

Most often, garbage accumulates for a long time in the connector until it accumulates in such a heap that charging stops altogether. Because of frequent connection devices with Lightning cable the dust is compressed and prevents normal connection with the device.

Important! You cannot clean it manually with a needle, as this can lead to mechanical damage to the elements of the smartphone, including failure of the controller.

To remove debris, use a wooden toothpick. Pay special attention to the corners, as this is where debris accumulates most often and the most. Try not to damage the contacts.

Important! After cleaning, you need to connect the device to the charging unit and wait about 15 minutes, since if the smartphone is deeply discharged, it will take time to transmit any signals.

iPhone won't charge due to a faulty USB port

You should first make sure that the USB connector to which the cable is connected is working properly; therefore, if there is a malfunction, the iPhone 5s, like any other model, will not charge. U desktop computer There are many ports built in, it’s worth using another option. The technique is simple due to the possibility of quick diagnosis.

Important! There may not be enough voltage supplied to the computer ports to fast charging smartphone, because of this the speed is reduced or completely absent. It is recommended to charge from a wall outlet.

There are some options for adjusting port power thanks to settings on the computer, but their use is recommended only if the preliminary optimization is incorrect.

Important! You should not charge from the keyboard.

iPhone 6 won't charge due to damaged charger

Very often iPhone 7 and older models do not charge due to problems with charging unit. Most of all cases are related to user actions.

There are a number of important factors to consider when it comes to charging:

Always buy original chargers. Chinese chargers, in the vast majority of cases, lead to serious disruptions in the operation of the smartphone. For some owners, such accessories led to rapid wear of the battery, for others they caused damage to the controller, and sometimes even caused the device to break down. Overpay for original chargers definitely worth it.

If the cable is original, there is another risk - simple wear and tear on the cord. Few users treat cables with care; therefore, they often step on them, cords rub against the edges of furniture or are crushed by legs. The wiring inside the charger is quite fragile and must be handled with care. Frequent kinks are extremely harmful to the cable. Sometimes, due to a faulty cord, charging stops at a certain point.
"The cable is not certified." Apple Corporation came up with special algorithms checking the originality of the cable used. As the iOS ways authentication is improving and few cables are able to pass them. It is recommended to charge with the original device.

Smartphone malfunction

Any element of a smartphone can be damaged, possibly due to defects, but more often due to improper use. Mostly the controller or battery is damaged. In this case, you will have to contact the service center.

If you still have questions on the topic “Why doesn’t the iPhone charge and what to do in this case?”, you can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>

The elements of any, even the most modern mobile units wear out over time, which leads to incorrect operation technology. Is no exception Apple products any generation. Quite often, the iPhone charges, but then does not turn on. It is worth understanding the main factors of such malfunctions and how to eliminate them.

When your iPhone 5 (iPad) is charging but won't turn on, you may need to replace the phone's battery because it has expired. In addition, the most common causes of this problem are:

use of a non-original and inexpensive charger;
damage to the main components located under the case - the synchronization cable, the board, as well as the power controller, which occurred as a result of impacts (falls) or liquid getting inside the phone;
software malfunctions;
failure of the USB port of the mobile device;
the reason that the iPhone shows charging, but does not respond to the button, may be contamination of the Lighting connector;
Ways to resolve the issue on your own.

When iPhone won't turn on after complete discharge and subsequent power supply, do not panic and immediately disassemble the equipment. To begin, simply turn on the power and leave the phone alone for about half an hour. If the charger or battery is working properly, switching on will happen automatically. Besides this, return iPhone performance may I help next sequence action: you need to simultaneously press the “Power” and “Home” keys for 10-15 seconds and wait for the Apple logo to appear.

You can try connecting a non-original charger that successfully powers other iPhones. If none of the above actions help, you will have to contact specialized service technicians to carry out repairs and restoration of equipment.

Physical damage

Having given it to a reliable service center, be sure to ask why the malfunction occurred. Most often, their prerequisites are mechanical damage caused by equipment falling from a great height onto a hard surface. In such cases, experts distinguish between two main outcomes.

Battery cable faults. For repairs, craftsmen use re-soldering of connector contacts; without special tools and proper experience in this matter, it is almost impossible to carry out high-quality re-soldering on your own. True, sometimes very effective way– cleaning the connector from accumulated dust, hair, animal fluff using a thin needle or toothpick.
The most pessimistic option is the occurrence of cracks on the main board. In this case, the recovery fee, alas, does not belong.

Checking the battery

If charging is in progress, but the iPhone does not turn on, specialists must check the condition battery. Basically, advanced user may well be able to do it on his own - for this you need to have the ability to Mac hand. In addition, you will need to install special utility, which is called coconut Battery. After this, you will need to connect the iPhone to the Mac and launch the program. As a result, a window will appear on the screen with information about a possible deviation from the norm when fully charged battery

Basically, when asked what to do for normal operation batteries, Apple has long recommended replacing them every 2-3 years. To do this, you need tools such as a set of miniature screwdrivers and a spudger for disconnecting the cables. You cannot do without a special suction cup, which will make it easier to open the case, and tweezers.

Checking the charger

The reason why the phone's power button does not respond when fully charged may be that there are some problems with charging. The first step to check is to connect your smartphone to your computer via a USB port. If it turns on successfully, you can safely send the old charger for repair or buy a new one, and in the meantime power the equipment through a personal computer.

There are several ways to distinguish original chargers for iPhone smartphones from counterfeits:

fake plastic Bad quality, irregularities and other defects can often be found on its surface;
the pins of the original device are not located parallel to each other, but “look” slightly inside the socket body;
at the end of the original there is a barely noticeable serial number, having alphanumeric markings.

iPhone recovery

If your iPhone 5 charges again but won't turn on, restoring the operating system may help. Most often, this need is indicated by the constant appearance and disappearance of the Apple logo when the phone is turned on. The recovery algorithm is as follows:

connect your smartphone to your computer via a USB cable;
launch iTunes on your PC;
simultaneously press mobile device Home buttons and Power
while holding down the “Home” key, connect it to a personal computer;
hold down the Home and Power keys until the screen displays the iTunes logo;
If a message appears on the screen confirming that the device software needs to be updated or restored, you can safely confirm the required operation.

There is another way to update iPhone firmware, executed in the following sequence:

First you need to start the gadget (under no circumstances should it be discharged);
then connect your computer and smartphone and launch iTunes;
Hold down the Home and Power buttons for 10 seconds and release the power key;
further still held Home key before the logo appears
iTunes (about 20-25 seconds will pass);
after that the smartphone enters DFU mode and you can restore the system.

Water ingress

As a rule, a dim screen and broken buttons indicate that water has entered the body of the gadget. This malfunction can be eliminated without disassembling it - to do this, you just need to thoroughly dry the device. If the method does not help, you should use the services of a service center to repair it.

If drying helps, a further oxide removal procedure will be required. To do this yourself, you need to disassemble the phone case and thoroughly wipe the oxidized parts with alcohol, using a toothbrush or alcohol wipe.

Conclusion

Carrying out do-it-yourself repair iPhone, pay attention. Special attention on the disassembly diagram of the device and assemble it in reverse order. To choose the most suitable methods repair, it is imperative to know what the cause of the malfunction is. Without knowing it, it is better not to risk it and take the gadget to a service center, and in the meantime use another, more inexpensive mobile phone.