Menu
homeGames

How to install your own router on a Beeline. We change the standard password on Wi-Fi routers from Beeline. If you need to work “with a hidden name”, you need to “Hide the access point”. Next, the network is configured like this

The Beeline company provides everyone with the opportunity to buy branded products in its salon. multifunctional devices, meeting modern wifi network requirements. Now each client has access to the model that best suits his requirements. Regardless of the manufacturer, the router must have a password.

The password has only one purpose - to make you paid wifi zone safe. Unfortunately, today it is a very common phenomenon when strangers guess the access code and use the Internet without the owner’s permission. This can negatively affect not only the quality of traffic, but also cause loss valuable information from computers or gadgets. Therefore, experts advise changing the wifi key monthly and making it as complex as possible each time. To do this, it is recommended to use a combination of numbers, symbols, large and small Latin letters. It is also convenient to change the password to something more memorable for you.

Changing your password is not that difficult, so even a novice user can do it. To successfully change everything, you need to take into account the features of each wifi router.

Changing the password on Smart Box

Recently, in authorized Beeline showrooms, it became possible to buy a new branded router Smart Box. It is classified as a technically advanced device due to its ability to maintain speeds of over 250 Mbps. If you managed to buy yourself this new product and want to secure your network and change Old Password, follow these steps:

1. Check the connection of your computer and router to the network.
2. Launch the browser and type “192.168.1.1” in the address address. This will take you to the welcome page. Click “Continue” on it

3. Enter “admin” next to “Username” and “Password” in the identification window. Then click on “Continue”.

4. After authorization is completed, a window for access to all device settings will open.
5. Open “Advanced settings”.
6. Go to the “Wi-Fi” section. Here click on “Security”.
7. In “Authentication” set the most secure value “WPA2-PSK”.
8. In the “SSID” line, enter the new name for your network.
9. In the “PSK” line, enter secret combination and click “Save”.

In order for the introduced changes to take effect on the router, reboot it and log into the Beeline network using these data.

Changing the password on Zyxel Keenetic Ultra

The Taiwanese company Zyxel occupies one of the leading positions in the Internet equipment market. Its products are famous all over the world, so the Beeline company made sure that its customers only use the best goods every day. Despite the brand name, anyone can change the network access code on this router. To do this you need to follow a few simple steps:

1. Open your browser.
2. Enter "192.168.0.1" into the search field.
3. The device will ask for identification information. To do this, enter “admin” in the blank lines.
4. After successful input, a window with all device settings will pop up on the monitor.
5. It will be below desired tab"Wi-Fi network".
6. In the “Network protection” item, set only “WPA2-PSK”. This is the most reliable type protection.
7. In the “Network Key” enter a new password.
8. Click “Apply”.

To avoid problems connecting to the Beeline network, reboot your router. Then enter new code access on all your gadgets and enjoy high-speed Internet.

Changing the password on ZTE MF90

A modern router that supports 4G is ideal for travel. Users note that he is pleasant appearance, ease of operation, reliable connection and long battery life. To change the password on this router, you need to spend five minutes and follow a few simple steps:

1. Launch the browser.
2. Enter “192.168.1.1” in the address field and click “Enter”.
3. In the authorization field, enter “Admin” next to your login and password. If a restriction has already been placed on your network, then enter this data.
4. Go to “Wifi”.
5. Fill in the “SSID Network Name”.
6. In the “Network encryption type” field, enter “WPA2-PSK”.
7. Enter your new password in the appropriate line below.

Be sure to reboot your device for successful further work everyone electronic devices with a new secret combination.

Changing Huawei E355 (3G Wi-Fi) password

Officially, this high-quality 3G router is called Huawei E355. The Chinese company Huawei has been specializing in the production of modern devices for working on the Internet for many years, which is why leading communication companies provide them to their customers. Of course, Beeline was no exception. To quickly change the passkey on this device, do the following:

1. Launch your browser.
2. In the search, type “192.168.3.1”
3. The monitor will show home page, which shows the signal and connection. Below you can see the number of connections.
4. At the top right is the “Log In” link that you need to follow.

6. After completing authorization, open the “Settings” tab.
7. Open the “WLAN” section, and in it the “WLAN Basic Settings” subsection.
8. In the “NAME (SSID)” line, enter the name of your network.
9. In “Authentication” set “WPA/WPA2-PSK”.
10. In the line “WPA pre-shared key” you can change the old access code to a new one.
11. Click “Apply” to save the settings on the router.

After successful saving, reboot your device to safely work on the Beeline wifi network. Don't forget to change the access code on all gadgets.

To keep your password strong, remember the following guidelines:

  • Do not use the full name, dates of birth of relatives and close people.
  • Pet names are also easy to guess.
  • Don't use easy number combinations.
  • Enter the key only in Latin letters.
  • Alternate between capitals and capital letters, numbers and symbols.
  • If you doubt that the password you have created is not complex enough, check it with special programs that can be found on the Internet.

Let it be a chaotic meaningless set of letters mixed with digital values. Initially, write it down on a piece of paper, place it in a visible place, and only then start changing the data. Do these simple steps at least a month and you don’t have to worry about the quality of the network and the safety of personal data.

Found a typo? Select the text and press Ctrl + Enter

  1. Turn on Wi-Fi adapter on a laptop. To do this, move to the appropriate position wifi switch on the laptop case (if you have one) or press the key combination on the keyboard. On most laptops this combination Fn+ one of the row keys F(the key number depends on the laptop manufacturer; you can identify it by the image of the Wi-Fi icon or check it in the instructions). An example is shown in the figure.
  1. Click “Start” -> “Network Connections”. If there is no “Network Connections” item, open the “Control Panel” and go to “Network Connections”.

  1. In the window that appears, double-click on the “Wireless Network Connection” icon.

  1. In the list of networks, select the network you want to connect to. If the network list is empty, click Refresh Network List. Modern routers are capable of creating two networks: If your computer sees a network operating at a frequency of 5 GHz (for example, Beeline_5G_XXXXXX), we recommend choosing it. If you are connected to a 5 GHz network, but the range Wi-Fi actions is not enough for you, switch to the 2.4 GHz network (for example, Beeline_2G_XXXXXX). Select a network, click the “Connect” button (or just click on the name the desired network twice).

  1. If you are connecting to a protected Wi-Fi network, a window will appear asking for the network key (password) and confirming it. Enter your password and click “Connect”.

  1. Fn+ one of the row keys F

  1. Click "Connect Networks".

  1. In the list of networks that appears, select your router's wireless network. Modern routers are capable of creating two networks:
    • at 2.4 GHz - a widespread but noisy frequency
    • at 5 GHz - a faster frequency, but with a shorter Wi-Fi range
    If your computer sees a network operating at a frequency of 5 GHz (for example, Beeline_5G_XXXXXX), we recommend selecting it. If you are connected to a 5 GHz network, but the Wi-Fi range is not sufficient for you, switch to the 2.4 GHz network (for example, Beeline_2G_XXXXXX). Select a network, click the “Connect” button.

  1. Click the “Network key or passphrase will be entered” button.

  1. Enter the password for your Wi-Fi network, then click the “Connect” button.

  1. Click the "Close" button. You have successfully connected to your wireless network and can work with Home Internet from Beeline.

  1. Turn on the Wi-Fi adapter on your laptop. To do this, move the Wi-Fi switch on the laptop body (if available) to the appropriate position or press the key combination on the keyboard. On most laptops this is a keyboard shortcut Fn+ one of the row keys F(the key number depends on the laptop manufacturer. You can identify it by the image of the Wi-Fi icon or check it in the instructions). An example is shown in the figure.
  1. Click the Start button and select Control Panel.

  1. In the Network and Internet section, select View network status and tasks.

  1. Select "Change adapter settings."

  1. In the list of connections that appears, select “Wireless Connection.” It must be enabled. If the connection status is “Disabled”, right-click on it and select “Enable”. Now click on the icon wireless connection left-click twice and select your router’s wireless network in the list of networks that appears. Modern routers are capable of creating two networks:
    • at 2.4 GHz - a widespread but noisy frequency
    • at 5 GHz - a faster frequency, but with a shorter Wi-Fi range
    If your computer sees a network operating at a frequency of 5 GHz (for example, Beeline_5G_XXXXXX), we recommend selecting it. If you are connected to a 5 GHz network, but the Wi-Fi range is not sufficient for you, switch to the 2.4 GHz network (for example, Beeline_2G_XXXXXX). Select a network, click the "Connect" button.

  1. Enter the password for your wireless network, click OK.

  1. You have successfully connected to your wireless network and can work with Home Internet from Beeline.
  1. Turn on the Wi-Fi adapter on your laptop. To do this, move the Wi-Fi switch on the laptop body (if available) to the appropriate position or press the key combination on the keyboard. On most laptops this is a keyboard shortcut Fn+ one of the row keys F(the key number depends on the laptop manufacturer. You can identify it by the image of the Wi-Fi icon or check it in the instructions). An example is shown in the figure.
  1. If you have it open home screen Windows, go to the standard desktop.

  1. Move your mouse pointer to the bottom right corner of the screen and then up. Click the "Options" icon.

  1. Click on the wireless network icon.

  1. In the list of connections that appears, select your router's wireless network. Modern routers are capable of creating two networks:
    • at 2.4 GHz - a widespread but noisy frequency
    • at 5 GHz - a faster frequency, but with a shorter Wi-Fi range
    If your computer sees a network operating at a frequency of 5 GHz (for example, Beeline_5G_XXXXXX), we recommend selecting it. If you are connected to a 5 GHz network, but the Wi-Fi range is not sufficient for you, switch to the 2.4 GHz network (for example, Beeline_2G_XXXXXX). Select a network. To automatically connect later, check the “Connect automatically” checkbox. Click the "Connect" button.

  1. Enter the password for your wireless network. Click "Next".

  1. You have successfully connected to your wireless network and can work with Home Internet from Beeline.

  1. Make sure the Wi-Fi interface is turned on. Wi-Fi icon menu bar should be bright and underneath it should say “Wi-Fi: On” or “Wi-Fi: search is underway networks." If the Wi-Fi interface is turned off, turn it on in the Wi-Fi menu.

  1. After Wi-Fi interface enabled, find and select from the list available connections your network. Modern routers are capable of creating two networks:
    • at 2.4 GHz - a widespread but noisy frequency
    • at 5 GHz - a faster frequency, but with a shorter Wi-Fi range
    If your computer sees a network operating at a frequency of 5 GHz (for example, Beeline_5G_XXXXXX), we recommend selecting it. If you are connected to a 5 GHz network, but the Wi-Fi range is not sufficient for you, switch to the 2.4 GHz network (for example, Beeline_2G_XXXXXX).

  1. If your network is secure, a window will appear asking you to enter a password. Enter the password, check the “Remember this network” box for future automatic connections to it, and click connect.

  1. If the connection is successful, your network will be marked with a checkmark in the list of available connections.

The most functional WI-FI router from Beeline is Smart Box ONE, which is used when connecting home internet and TV. The cost of the device is 2500 rubles. If wired internet no, then you can use 4G ZTE router MF90.

Latest models wireless modems Beeline is equipped with more powerful transmitter signal that operates in two bands - 2.4 and 5 GHz, so you don’t have to worry that some device won’t connect to the Internet. Improved processor maximum level ensures the reliability of the WI-FI signal.

The device has the following advantages:

  1. The maximum transfer speed is 300 Mbit/s.
  2. The 802.11n standard, which is supported by almost all devices.
  3. Supports digital TV connection.
  4. Convenient interface for configuration.
  5. Modern design.

The 4G router provides network access at speeds of up to 74 Mbit/s. It comes with a SIM card that allows you to use 30 GB of Internet per month. The monthly fee is 1200 rubles.

Connection and setup 4G/WI-Router FI

Connecting the router is quite simple, you need to connect the power cable, as well as the Internet cable that is connected to the room. In order to connect the device to the network, you need to connect the computer to the device using a network cable via a LAN connector. The 4G router connects to the computer via a USB connector.

  1. After all the lights on the device light up, you will need to open a browser on your computer and go to 192.168.1.1. After this, the welcome page of the interface should open.
  2. To gain access to quick setup, you need to enter your login and password. IN standard setting The login and password are “admin”.
  3. After logging in, the main menu will open. If the user is not experienced, then it is recommended to go through the procedure quick setup. If you are well versed in such matters, then you can go to the advanced settings menu.
  4. Quick setup consists of four steps:

Home Internet. In this section you can connect the device to the Beeline network. All required parameters are already contained in the device firmware.

WI-FI network. This item allows you to set wireless network access parameters. In this section you must enter the network name and password. The password must be at least 8 characters.

Guest network. Setup is done here guest access to the Internet.

TV. IN in this case you need to select the LAN port through which the IPTV set-top box will be integrated, if you have one.

When the router establishes a connection, the “Status” line will say “Internet connected.” At this stage, the setup is completed and you can fully use the Internet.

Setting up a 4G router is done in the same way.

Software Update

The operation of the device is controlled by its firmware, which needs to be updated from time to time in order to prevent malfunctions in its functioning. The firmware should be updated carefully, because if anything goes wrong, service center you can't escape.

  1. The latest software must be downloaded from the official website.
  2. Open the page in the browser 192.168.1.1 .
  3. Login to the menu occurs by entering your login and password (enter admin in both fields).
  4. Next, you need to go to the advanced settings menu and select “Other” at the top of the page.
  5. A list of settings will appear on the left side, where you need to select “Software Update”. At this point you need to select the folder in which the downloaded firmware is located.
  6. Click on the “Update” button and do not touch anything so as not to disturb the settings.
  7. After a short period of time, the router will automatically reboot and be ready for use.

The 4G router firmware is not updated.

The mobile operator Beeline at one time acquired the business of one of the major players in the Internet provider market, so today its subscribers in the field of providing high speed connection are millions of users. Therefore, I decided to write this step-by-step article on setting up a Beeline router, which describes connecting to the Internet using the L2TP protocol and can be used for any model, regardless of the manufacturer - Asus, D-Link DIR TP-Link Zyxel Keenetic and so on. The only differences may be in the layout of settings functions and menu headings in the device admin panel.

We find it on the router WAN port of blue color(if it has color). We insert a cable into it from the Beeline Internet provider, which was previously connected directly to the computer. Next, we find one or more yellow LAN ports there. We insert into one of them network cable out of the router box. We insert the other end into the network card on the computer.

Turn on this PC or laptop and go to the section: Start > Control Panel > Network and Internet > Network and Sharing Center and shared access> Management network connections> Changes adapter settings.


There will be one or more network connection icons, of which we need “Connect via local network" Call up its settings menu by clicking right button mouse and go to “Properties”

There is such a section as “Internet Protocol version 4” - check the boxes to receive the IP and DNS server “automatically”.


Save the changes with the button.

Setting up a router on the Internet from Beeline

We return to the computer, and address bar browser, type the IP address from the label.

We find in the router menu the section responsible for connecting to the Beeline Internet - it can be called Internet or WAN


  • In the Type column WAN connections select “L2TP”
  • WAN IP address - automatically
  • DNS - automatic

In the “Server” section we write “tp.internet.beeline.ru”
Username and password - we indicate from the agreement with Beeline.

Save the settings and reboot the router.

Configuring a Beeline router to broadcast a wireless signal

Finally, all that remains is to configure WiFi. Open the section “ Wireless network"and ask eigenvalues For:

  • - the name of your wifi networks, which will be displayed in the connection list
  • Network security method - WPA2-Personal

Many providers provide network access, but Beeline is considered one of the popular options. The company provides mobile 4G Internet or home connection. You can set up a connection through a proprietary modem or a router from another company to receive Wi-Fi coverage. Configuration may vary depending on device model.

Setting up a router for Beeline

When using several computers at home, the task of setting up Wi-Fi becomes urgent. Wireless Internet especially convenient if you have modern smartphones, tablet or laptop. Setting up Beeline through a router can be done automatically or manually, it depends on the device model. As a rule, when a contract is concluded, a master comes home to help create a connection. If the Wi-Fi installation was carried out later, or the device was replaced, then the connection will have to be configured again.

For each device there are instructions for setting parameters for proper operation, but there are points that are the same for each case. Eg:

  • connect the wire (cable) to the router;
  • connect the device via the second wire to the computer;
  • Configure the device (enter the Beeline router address, set the connection type, set a password and connection security).

Setting up a Beeline DIR-300 router

There are several popular models of devices that are used by most customers. Few people take options without Wi-Fi, because, as a rule, the device is purchased for it. Setting up the router Beeline dir occurs in two stages: physical connection, connection control via browser. First you need to make sure that network card installed latest version firmware. This applies more to owners of older computer models. The configuration is then carried out as follows:

  1. Unpack the device, connect the power supply and cord to the connector labeled “WAN”. Connect the second cord to one of the additional inputs and connect it to the computer.
  2. Next, set up the connection in the Start menu. Go to “Control Panel”, here click on “Network and Sharing Center...”. Click Adapter Settings. Set the line to Internet Protocol Version 4, then click “Properties”.
  3. Make sure that the items with automatic IP issuance are active and DNS servers.
  4. Next you need to go to the internal interface. To do this, in any browser, enter “192.168.1.1” into the site address field. A form for entering your login/password will be displayed to log into the admin panel. To go inside, you must enter the word “Admin” in both fields. These are factory access options, if they do not fit, it means they have been changed. You can reset the values ​​by pressing Reset button on the device. You should hold it for about 10 seconds.
  5. When you log into the back-end interface, select “Configure manually.” Next, go to the “Network” tab, click “Add”.
  6. Select the connection type - L2TP, dynamic IP.
  7. Enter your Beeline-issued login and password into the appropriate fields.
  8. Check the boxes next to “Keep Alive” and “Connect automatically”. Click "Save".
  9. Click “Save” again. Next will happen automatic connection. To find out if the network is working properly, just go to any website from your phone.

Setting up an Asus Beeline router

Another popular device manufacturer is Asus. There is no program on the disk to automatically connect to the network, so you will have to do everything manually. Carry out setup Asus router Beeline is needed as follows:

  1. Connect the device to power, network and computer.
  2. Open your browser, write 192.168.1.1 in the site address bar, press enter.
  3. To access, enter the password and login “admin”.
  4. In internal interface Click on the “Advanced Settings” tab, select “Wan”. Next, specify the following data: “Connection Type” - “L2TP”, “Get the WAN IP automatically” - “Yes”, “Connect to DNS Server automatically” - “Yes”, “ VPN Server" - "tp.internet.beeline.ru". In the login/password fields, indicate the access granted by your provider.
  5. For turn on Wi-Fi go to the “Network Map” item.
  6. A table will appear on the right for quick configuration wireless connection. You need to configure it as follows: “Wireless name” - specify/create a name home network, “Security level” - “WPA-Auto-Personal”, “WPA Encryption” - “TKIP+AES”. On the “WPA-PSK key” line, write the Wi-Fi password. Click the “Apply” button.

Setting up a TP-Link router for Beeline

This popular model thanks to the presence of an installation wizard that is able to connect to the network independently. As a rule, a disk on which the program is located is sold along with the device. You just need to connect the router to your computer, insert the CD and launch the application. If the connection does not open, you need to do everything yourself. Settings TP-Link router for Beeline is carried out as follows:

  1. After connecting the device, go to the browser, type in “192.168.1.1”, press “Enter”. Enter the login/password “admin”
  2. Open the “Network” tab and the “WAN” item.
  3. Specify the connection type “L2TP”, enter the login/password issued by your provider (Beeline), IP server – “tp.internet.beeline.ru”.
  4. Specify automatic connection (“Connect Automatically”), MTU size– 1400. Click on the “Save” button.
  5. To enable the Wi-Fi network, go to the “Wireless” section and click on “Wireless Settings”.
  6. Come up with a name for the network, specify the region “Russia”, channel and mode – “automatic”. Click the “Save” button.
  7. Next, go again to the “Wireless” section, click on “Wireless Security”.
  8. Here, activate the “WPA-PSK/WPA2-PSK” item, then set everything to “automatic” mode. Create a password for the connection and click “Save”.

Setting up a Zyxel Keenetic router for Beeline

Some users prefer Zyxel. The physical connection of the router is carried out in the same way (a wire to the WAN connector and a second one to network card computer). The intranet setup of the Beeline keenetic router is as follows:

  1. Type 192.168.1.1 in your browser.
  2. Enter “admin” as your login/password.
  3. Go to the “Internet” section, click on “Connection”.
  4. Specify the following values ​​in order: think of any name for the Internet center, configure IP parameters and getting DNS set it to automatic, check the box to respond to ping requests and enable UPnP. Click on "Apply".
  5. Next you need the “Authorization” tab. Do not check the first box, the protocol should be L2TP, the server address should be tp.internet.beeline.ru, write down the login and password in the given access lines. Save your changes.
  6. To activate Wi-Fi, open the section " Wi-Fi network", section "Connection".
  7. Check the box to enable the access point. Come up with a network name, the SSID field should be left blank, the standard is 802.11g/n. The next two items should be in “auto-select” mode, then leave everything as is. Click on “Apply”.
  8. Go to the "Security" tab. Set authentication to WPA-PSK/WPA2-PSK, security type to TKIP/AES, format to ASCII. Create and write a password for access. Click "Apply".

Video: Beeline Smart Box router - setup