Menu
homeInternet

Disabling wifi. D-Link DIR series. Disabling extraneous MAC addresses from WiFi

  • 1 How to disable Wi-Fi on a Rostelecom modem
  • 2 How to disconnect other users from Rostelecom Wi-Fi
  • 3 Additional information
  • 4 Conclusion
Wi-Fi technology has become an integral part of our lives. This service is used both at home and in public institutions. In some cases, it becomes necessary to disable the network, making it inactive. Before turning off Wi-Fi on your Rostelecom router, you should carefully read the instructions so that no difficulties arise in the process. You can perform the actions yourself, without calling a specialist.

How to disable Wi-Fi on a Rostelecom modem

Most users do not turn off the signal from the moment of purchase. There is nothing wrong with constantly using this function if you do not have important information stored on your PC. When broadcasting a signal, experienced programmers can penetrate your computer through certain programs.
The need to turn off the distribution also arises when there are children in the house, for educational purposes. Many subscribers are convinced that Wi-Fi waves are harmful to health with constant exposure. Regardless of what exactly caused the shutdown, you should use the step-by-step guide to action:
To completely disable Wi-Fi broadcasting, you should follow certain steps:
  • Enter the custom settings menu.

  • On the router, click on the WAN button.

  • Remove the external antenna, which may completely interrupt the signal or significantly reduce its radius.

    • It is best to carry out certain manipulations by logging into the control panel. The most common router model is Ethernet with an RJ-45 connector. The shutdown procedure will be similar for any type of equipment. First you need to enter the gateway 192.168.1.1 in your browser. To authorize in your personal account, you must enter the login and password indicated on the equipment case or the standard combination admin/admin.
    Next, go to the WiFi-Wireless-Wlan section. In the “Enable Wi-Fi” checkbox, uncheck the box and save the settings. After saving the changes, the page will be reloaded and the changes will take effect.

    How to disconnect other users from Rostelecom Wi-Fi

    You can determine a third-party connection to your network by several signs: the indicator will constantly blink and the exchange data speed will decrease. If these changes occur, you should make sure that they decided to use your network without the knowledge of the owner. You can identify the attacker by looking at his device's IP and MAC address. To do this you need to use the ipconfig command.
    Go to the router settings and enter the address of your device in the browser line and enter your data. The list will show all users connected to your network. You can use additional Wireless Network utilities. You need to run the program from the PC that is connected to the router. The program will scan all connected devices and user addresses

    If you have any questions, please let us know
    Before turning off wi fi on the Rostelecom router for connected users, read the following instructions:

  • You can block someone else's address only after it has been identified.

  • You can ban this user by using an additional utility or by logging into the router’s native settings.

    • Additional Information


    Set a strong password for Wi-Fi that is not similar to your home address. First and last name and login. This measure will increase the level of security and avoid unwanted connections.
    Please note that disabling wi-fi is possible both for individual subscribers and for an entire group. You can allow connections only for yourself. For these purposes, it is recommended to use url, mac, ip filters. This settings option is indispensable for those users who prefer to use the Internet connection alone. To activate filtering, go to the control panel in the Windows section and activate the getmac command. After this, your IP address will be determined, which should be specified in the MAC filter.

    Conclusion

    Regardless of the type of equipment, disabling Wi-Fi is carried out in the same way. Settings may vary slightly, and users can make adjustments on their own, intuitively. On any router, you can stop distributing Wi-Fi yourself. You can enter the menu. Using any technology: desktop computer, tablet or smartphone.

    Hello, dear readers. Very often I get a question from you like this: is it possible to turn off Wi-Fi on the router, but at the same time, the device itself can function without sharing the Internet. Probably, someone may only need a network cable for work, while someone wants to distribute the Internet only to 2 computers/laptops via cable. Or maybe someone is afraid of router radiation, although whether router radiation is really harmful can be debated and debated. As a rule, the router has a button whose purpose is to disable the Wi-Fi module. This is done with just one click. But, unfortunately, it is not yet available on every model. On the TP LINK TL MR3220 this button is recessed into the body of the device so that it is not accidentally pressed unnecessarily. To press this button, you will probably need some kind of pointed object. To turn on the network, you need to press the button again.


    If you have a router model for which the miracle button described above is not provided, you will have to disable the router through the router settings; you probably know how to enter them yourself. IN enter in the browser next address 192.168.1.1 (in some cases 192.168.0.1). Next, you need to enter a password and login, which can be viewed on the bottom panel of the device (by default they are set as admin and admin).

    For Asus
    On the main page you will immediately see an item called "Wireless LAN radio module", and next to it there are two switches - “on” and "off". Choose last, click “Apply”, after this Wi-Fi will not work.


    For TP LINK
    In menu item "Settings" you will need to go to the tab Wireless - Wireless Settings(in Russian Wireless mode - Wireless Settings). There you will see a check mark Enable Wireless Router Radio. Uncheck the box and save the settings.


    Thus, we have looked at ways to disable Wi-Fi on the most common routers; if you use some other router, then probably the radio module on them can be disabled in the Wireless tab or with a special button.

    Nowadays, it is almost impossible to imagine life without the Internet. And one of its main components is the Wi-Fi wireless network. Previously, everyone thought that an Internet connection via a network cable was reliable, fast and inexpensive. Now this opinion has not changed, but the competitor in the form of Wi-Fi has gained many more fans.

    It is easier for people to connect to the Internet via a Wi-Fi connection than to look for a wire, then insert it into special connectors and only then do what they intended. Take the same laptop or phone. These devices have built-in modems that allow you to connect to the Internet in the blink of an eye, just know the selected network.

    In recent years, a stereotype has emerged that there is no point in turning off Wi-Fi, because you may need it at the most unexpected time. There is no point in arguing with this, but if you want to turn off Wi-Fi on the same laptop, we will tell you how to do it correctly.

    Instructions

    Every laptop has a combination, after pressing which all network connections are interrupted. But you only denied the laptop access to Wi-Fi, and did not turn it off. In order to completely turn off Wi-Fi on a laptop, you must perform the following steps:

    • go to the Network and Sharing Center;
    • after entering there, find the inscription “ Change adapter settings» and click on it with the left mouse button;
    • we will see a list of all available connections. Among them you need to find the one marked as “ Wireless" By right-clicking on it and selecting “ Disable", it is usually located first in the window that opens, you turn off Wi-Fi on your laptop.

    To check if it is valid, pay attention to the network connections icon that is located in the tray. There you should see a network icon crossed out with a red cross.

    To enable the wireless connection, follow the same steps, only instead of “ Disable» click « Turn on».

    Hello. The title sounds kind of strange, doesn't it? It would seem, why turn off Wi-Fi on a Wi-Fi router, that’s why it’s a Wi-Fi router :). But not everything is so simple, different things happen, and even such advice should be on my website. In fact, after looking at the information, I noticed that requests like “How to turn off Wi-Fi on a router” there is, which means people need it and they are looking for it.

    Or perhaps you don’t yet have any devices that connect via Wi-Fi, but you bought a Wi-Fi router and connected your computer via cable. In principle, you did the right thing, because sooner or later you will have such devices that will connect to the Internet via Wi-Fi. But until then, the Wi-Fi module can simply be turned off. There are many options.

    I will write instructions on how to disable the Wi-Fi module on TP-Link routers, and more specifically, I have one. But even if you have, for example, a D-Link router, I think that this process is not very different. And if your Wi-Fi is already turned off, then this way you can turn it on.

    Disable (enable) the Wi-Fi module on the TP-Link router

    So let's get started.

    At the time of setup, you need to connect the router to the computer via a network cable.

    Go to the router settings. Open the browser and enter the address in the address bar 192.168.1.1 , then enter the username and password to access the router settings and click “Submit”.

    Next, go to the “Wireless” tab. And if you need to disable the Wi-Fi module, then simply uncheck the box next to “Enable Wireless Router Radio”. If you need to enable it, check the box, it's simple :). To save the results, click the “Save” button. The changes will take effect after rebooting the router.

    Home Wi-Fi networks have become commonplace throughout the civilized world. Almost every home has a small box with wires and blinking lights, thanks to which network coverage is created over a small area. So the user can connect to the Internet while in any room or even on the street. However, some unscrupulous neighbors prefer not to pay for Internet services, but to use someone else’s network without the knowledge of its owner. In this article, we will show you how to disconnect an unwanted user from your WiFi router.

    Sharing something with people around you is good, but only if it does not come to your own detriment. Each user connected to a wireless network takes on part of the traffic, and thereby reduces the overall data exchange speed. In other words: the more people connect to the router, the more the Internet slows down. Separately, it is worth noting the possibility of intrusion into the network by attackers conducting illegal financial or other types of transactions using your network address. This way they remain in the shadows, and all the troubles with the law will be transferred to you.

    Once you have determined that, in addition to your family and guests, your home Internet is used by strangers, you can safely begin blocking access for illegal devices. Below we have given several ways to disconnect other users from Wi-Fi.

    Disabling extraneous MAC addresses from WiFi

    The most common option for protecting your own network is blocking Wi-Fi via MAC address. The method does not require the use of third-party software. All we need is a browser and a login with a password for the router.

    We start in this order:

    1. In the search bar of the browser, enter the router’s IP address 168.0.1 or 192.168.1.1 and click « Enter".
    1. In the authorization fields, enter the router's login and password. By default they look like this: « admin", "1234", "0000"(provided that you have not changed your authorization data in advance).
    1. Go to the router statistics item called "DHCP Clients List" or « StatusLAN". Pay attention to the number of connected devices and their MAC address - these are unauthorized users (provided that all your devices are disconnected from the WiFi network).

    In the router settings from TP-Link it looks like this:

    In the TP-Link interface this is presented a little differently:

    After pressing the button "Turn on" filtering will become active for blacklisted addresses and will block Wi-Fi from other users.

    If desired, you can use a white list. The white list is created to store a limited number of addresses with access to the connection. This way you can block Wi-Fi from anyone with a new MAC. To do this, move the checkbox to "Whitelist" and add your MAC and your loved ones to the list.

    Scanning with Wireless Network Watcher

    To view devices connected to the router, you can use special scanner programs like Wireless Network Watcher from the NirSofer programmer. It is capable of displaying the IP and MAC addresses of users on the network. You will also be able to save this information as a report file until you decide to disconnect the person from your Wi-Fi. The software interface is initially in English, but can be easily changed with a separately downloaded localization tool.

    To get started with Wireless Network Watcher, follow our tips.

    1. Download and install the free program from the official developer website http://www.nirsoft.net/utils/wireless_network_watcher.html.

    1. Download, unpack and copy the crack file "WNetWatcher_lng.ini" to the folder with the installed program.

    1. The program's working window opens in front of us.

    In the screenshot below we see the active router, as well as the computer and mobile device connected to it.

    The utility provides information about the device manufacturer, its status, the date of the first and last discovery, and the number of recorded connections. What we are most interested in is the MAC address, which will be required to subsequently disconnect users from Wi-Fi via a computer in the manner described above.

    Advantages

    • Interface in Russian.
    • Absolutely free software.
    • Can scan wired and wireless network connections.
    • It is minimized to a tray and used as a signal when new users enter/exit.
    • Displays IP and MAC.
    • Saves the scan result.

    Flaws

    • The crack needs to be downloaded and copied separately.

    Blocking with SoftPerfect WiFi Guard

    The Australian program for analyzing and managing connections, SoftPerfect WiFi Guard, was developed by the SoftPerfect Research team, and performs the same tasks, but is capable of notifying about the activity of “uninvited guests” with an indicator in the form of a red traffic light. It also does not need Russification, since it is immediately in Russian.

    To check your network, follow the instructions below:

    1. Download and install the utility from the developer’s website https://www.softperfect.com/products/wifiguard.

    1. Launch SoftPerfect WiFi Guard and start scanning by clicking on the corresponding button.

    1. The utility will present a list of connections and notify about suspicious devices.


    Cases of illegal use of someone else's Internet are so widespread that many people do not even know that they are sharing their router network with other people. It’s even worse if these users conduct prohibited activities on the Internet, because they can easily avoid responsibility, unlike you. If you did not consent to this, then apply the above knowledge to block Wi-Fi from random parasites and unscrupulous neighbors.

    In our article, we have given comprehensive information on “how to block people connecting to my Wi-Fi.” Use screens and scans to check the network. You can configure the router only through a browser and the interface of its own OS (described at the beginning of the article).

    At the same time, we advise you to regularly change your Wi-Fi password to a more complex one. In order not to accidentally forget it, write down the combination on a piece of paper and store it in a secluded place - it’s banal, but simple and reliable. We do not recommend giving your wireless connection password to strangers. Sooner or later more people may find out about it and then you will have to change it again.