Smart box beeline firmware for other providers. How to set up a Smart Box router from Beeline

Beeline firmware is loaded with the latest file. Beeline SB and SB O with OW firmware buy at. The cost of Beeline S B is 1800 rubles. There are 3 web interfaces filled with Beeline, Rontel, and Gpon. A LED, Beeline Router S B O has. Beeline alternative firmware updated distribution added. Video lesson demonstrating the capabilities of controlling the Beeline TV set-top box: pause, rewind, record programs. Beeline S B unlocking for all operators. Thank you said 205 times

Download the archive with firmware files for B S B O and unpack it to local disk, for example, in folder F. Tag cloud Firmware for tuner O 800, HUAWEI SAX MT882 how to flash and break LINK connection to any, Beeline S B O, Review of alternatives. Thank you said 618 times. Firmware for router S B O dual-band WF router Beeline S B on B O. Reinstallation software performed with the sole purpose of ridding the router of bugs previous firmware. You have become a Beeline television and Internet subscriber in Saratov, having connected through the 21st Century House promotion and delivered to your apartment per day. Now, in the new personal account My Beeline you can easily monitor expenses and connect services. After flashing the Beeline router, it must be rebooted from new firmware, after which S B

More interesting option, this is to install some popular alternative firmware on it, like or. B alternative firmware. Wait while the router performs the firmware update, this process takes approximately 5 minutes, after which the router. Thank you said 467 times. Beeline S B router is logical. Instructions for the Beeline S B router installation and configuration of the equipment necessary for Current version firmware. B S B Alternative Firmware. Lying abandoned at home, sent to scrap immediately after connecting to BeeLine L2TP, t

Thank you said 465 times. S firmware for other providers, a fresh file has been uploaded. Download latest version firmware for B S B O and unpack it. Firmware S S B O B S B brand. Beeline router S B O. S alternative firmware download. The Beeline S B O router has four LAN outputs, provides. Router firmware updated file added

Carefully read the instructions for flashing B S BOX ONE and. Alternative firmware for the Beeline router, the current distribution has been downloaded. Wait while the router performs the firmware update, this process takes approximately 5 minutes, after which the router needs to. Beeline routers S B O. Starting from the firmware version, the superuser password is changed to serial number devices SFXXXXXXXXXX. In our city, the Internet provider Beeline began connecting subscribers via so-called optics to the FTTB home in parallel with. Beeline router alternative firmware uploaded a new archive. Beeline router firmware alternative firmware updated file uploaded

There is nothing secret when flashing the B S BOX ONE firmware, so perform this procedure not even possible experienced user. Now I took their S B, then SB O from. Beeline SB and SB O with OW firmware advertisement for sale in Krasnodar. That’s why I started looking for alternative firmware for the smart box and soon realized that there weren’t any and not in the near future. E-line router settings S B Firmware update. WF Beeline S B, or. S alternative firmware from Beeline Forum. Hello everyone, so there is S B O, I read that it is supposedly identical to the regular S B! Other with tags, Beeline, beeline, firmware

S B B N300 firmware [. You can download the current firmware version from the official Beeline website or here.

In our city, the Internet provider Beeline began connecting subscribers via so-called “fiber to the home” - FTTB - in parallel with Rostelecom. Dom.ru didn’t even exist then. At first they offered different models WiFi routers, firmware proprietary firmware— D-Link DIR-300, TrendNet, NetGear, etc. Then came new model, which gradually replaced the rest - this Smart router Box. As it turned out later, this is actually the only good branded router not only from Beeline, but also among competing providers.
Setting up Smart Box yourself is very simple and there is no need to call a specialist. Now I will tell you how to do this.

Login to the configurator interface:

Device IP address in local network(), as well as login and password to enter the configurator ( admin/admin) can be found on the sticker located on the bottom of the case:

After that, open the web browser and enter the address - http://192.168.1.1. Click Enter key and we see this greeting.

Click on the “Continue” button and see this authorization form:

Enter login admin, password admin and get to the start menu Smart settings Box from Beeline.

Basic setup of Smart Box

In the start menu we need to call the configuration wizard, for which we click on the “Quick setup” button:

This will take you to a page where everything is collected required parameters. Honestly, as far as I remember, this was done by Dom.ru. On devices from Rostelecom and TTK, everything is much more complicated and confusing for an untrained user.

In the “Login” and “Password” fields you must enter data for authorization in Beeline billing. The account number is used as a login in our area. I think that this is how it is organized in other areas.
In the “Network name” field, you need to come up with and enter the name of your home network Wi-Fi on Smart Box. In the “Password” field you also need to enter key phrase, which the router will request when connecting to its Wi-Fi.
If you have also connected Beeline television, then in the very bottom section of the menu, called “Beeline TV”, you should mark the LAN port into which the set-top box will be connected. Click on the “Save” button.
That's all. You can check the operation of the device!

If something is unclear, watch the video instructions.

Smart Box firmware

As with any other router, you need to periodically update the firmware on the Beeline Smart Box to a more recent one. This measure is necessary, since new firmware versions fix problems that were present in previous ones. You can download the latest version on the official Beeline website - link.

In order to reflash the Smart Box router, you need to click on the “Advanced settings” button in the start menu:

In the window that appears, you need to open the menu section Other >>> Software update:

Click on the “Select file” button, find and feed the firmware file to Smartbox. Now you need to click the “Update” button. The following image will appear:

After the process is completed, the router will reboot itself. The settings are usually not reset. But even if they reset, don’t be alarmed, following the instructions above you can set everything up yourself without any problems!

Working with other providers

Nowadays, switching from one telecom operator to another is a completely common procedure. Everyone is looking for a cheaper tariff, higher speed, and better conditions. This is understandable and quite normal. The Smart Box router is locked to Beeline. But if you have a Superuser password, then you can configure it for other providers. And at the same time, everything is done using standard software and no alternative firmware is required. User login with elevated rights is SuperUser. The password for firmware up to and including version 2.0.24 is Beeline$martB0x. After version 2.0.25, the superadmin password was changed. Now the serial number of the device of the type SF********* is used in this capacity. You can see it on the sticker. For example, on my device it is like this - SF13F4FF1F78.
Next we open Advanced settings >> Other >> WAN. Smartbox works without problems with almost any other provider. Here is an example of its configuration under Rostelecom and Dom.ru:

The router supports virtual networks VLAN, which means there will be no problems with interactive TV from Rostelecom, TTK, and Dom.ru!

Connect the cable that our installers brought to your apartment in WAN port, and connect your computer to any of the LAN ports. You can also connect your PC to the router wirelessly, but it is better to use a cable at the initial setup stage.

Step 1

Connect network cable your computer to any of the 4 LAN ports of the router. The cable that our installers pulled into your apartment must be connected to the “WAN” port.

Step 2

Open your browser and enter address bar 192.168.1.1. You will be taken to a welcome page. Click Continue.

Step 3

The router will prompt you to enter your username and password. Enter admin in the first field, and admin in the second. Click Continue.

Step 4

You will be taken to the main menu of the router. Select Quick Setup.

Step 5

You will be taken to the page quick setup router. It consists of four sections, let's look at the purpose of each of them:
1) " Home Internet" - V this section The connection to the Beeline network is being configured. All configuration data necessary for connection is already contained in the router’s memory; you just need to enter your username and password in the appropriate fields.
2) “Wi-Fi network of the router” - here you can configure wireless network your router.

To set up a network in the 2.4 GHz frequency range, enter the name of your network, for example my_wifi2G, in the 2GHz network name field, and enter the password to access it in the Password field. Please note that the password must contain at least 8 characters.
To set up a network in the 5 GHz frequency range, enter the name of your network, for example my_wifi5G, in the 5 GHz network name field, and enter the password to access it in the Password field. Please note that the password must contain at least 8 characters.

3) “Guest Wi-Fi network” - here you can configure the guest wireless network of your router.

4) “Beeline” TV - if you have connected the “Beeline” TV service, you need to select the router port to which you will connect the set-top box. If you are browsing broadcast channels on your computer or using the Xbox 360 console, then you don’t need to configure anything.
To save the settings you entered, click the Save button.

Step 6

As soon as the router establishes a connection, you will see “Internet connected” opposite the Status line. Congratulations, you have fully configured your router to work on the Beeline network.

Be careful when following the instructions in this section. In case of an error in the actions, a visit to the service center will be required to restore the device.

Step 1

Download the firmware. Current firmware version - 2.0.22 (14.5 MB)

Step 2

In your browser, open the page at 192.168.1.1

Step 3

In the window that opens, enter a name user admin and password admin.

Step 4

Click the Continue button.

Step 5

Click on the "Advanced Settings" button.

Step 6

IN top menu select "Others".

Step 7

A page with the basic settings of the router will open. In the left menu, select “Software Update”.

Click the "Select File" button and specify the location of the firmware file that you downloaded earlier.

Step 8

After that, click the “Perform update” button

Step 9

Wait while the router performs a firmware update, this process takes approximately 5 minutes, after which the router must be rebooted and it will be ready to use.

Use a hard reset if you need to configure the device again (remove all custom settings), there is no access to the web page of the router settings interface; after setting up the router, the Internet connection was not established or the access password was lost.

Attention! By doing hard reset all settings custom settings will be reset to factory settings!

There is a recessed RESET (RESTORE) button on the device body, which allows you to reset the settings to factory settings. You can find the RESET, RESTORE button on the same side of the router case where the other connectors and buttons are located. In rare cases, the button may be located on the bottom of the router.

To reset the router settings to factory settings, follow these steps:
Turn on the power of the router and wait full load devices. Press the RESET, RESTORE button using a pointed thin object (such as a paper clip) for 30 seconds, then release the button.
After this, the router will reboot with default settings (factory settings) and will need to be configured again.

The story is about how I made a candy rocket, or rather, transferred the router software to the Padavan firmware.
Hardware specialists, IT specialists, owners of Smart BOX Pro, please under the cat!
“Without buldrabyz”®
Clause 18 is carefully present,
Post from the section/category do it yourself! This is a technical post!
Sak bulygyz - Important: The article was written for people with hands that know how to hold a soldering iron and know how to Google!

Preface: (Pain) can be skipped:

I had asus router rt16, I lived and did not grieve. (could have ended there)
It's 2014. I was supposed to become a young dad, my daughter was going to be born soon.
I wanted a powerful router, no worse than the asus rt16, and it had 5 GHz wifi support!
I started choosing a router for myself: take the kineticist, they shouted from the depths of the forums, the wallet said: we won’t pull it.
Here an advertisement appeared: “Hey guy, if you want a router for free, take it,” the advertisement said, but under the conditions, you take the Internet for 1 year and get the router for free.
I immediately Googled and came across an article on Habré “no router from your ISP, no need.”
There seemed to be no signs of trouble - beautiful hardware CPU1: MediaTek MT7621AT (880 MHz, 2 cores)
RAM: 256 MiB (ESMT F59L2G81A-25T), gigabit ports, Wi-Fi 5 hertz, two USB ports, that’s it I thought!
An inner voice said: listen! - and the guy who takes your VPN will continue to take it for another 1 year? - Yes, I answered in my thoughts! And then the wallet shouted: “The budget has been allocated - adjustments have been made.
That's how I became the owner of Smart BOX Pro.
Having installed the router after RT16 for about 3 months, I was overwhelmed with work and forgot about it.
Slowly, shortcomings of the router began to emerge, ahaahhah naive Chukchi boy - free cheese only in a mousetrap!
The router was created by Sercom, commissioned by Beeline.
He presented himself as redrawn simple gui, but there is no torrent, no one declared it.
There is no VPN server. There is a long server, but when it encountered Cyrillic on the disk, it froze completely.
Load per processor in idle time 23%, settings of forwarded ports are forgotten after a restart, intensive googling for alternative firmware said

: “There will be no miracle”

Memory in a Nand device with a locked bootloader.
There were people like me on the ixbt forum. After reading many pages I came to the short conclusion that rgmi 2 was cut off from the van port to light bulbs and it became a pseudo gigabit.
As a result, on the forum one could come across the statement: throw it away, buy a normal router.
Everything was very sad.
The thought was that the investment was in vain, but then I remembered that it was worth a whopping 5,990 rubles at that time. I remembered about the identified jamb in the server length and decided to make a ticket to the provider’s technical support, this was the month of July/June 2015.
Technical support worked quickly, we connected remotely and found that the problem was real and that was all.
Once every six months since 2014, I called Beeline and asked how things were going with my ticket, to which they endlessly transferred me - once to the head of the department with complaints from clients. There they answered me, “The young man, the router is working, what are your complaints?” to which I objected: but the server does not work correctly, and it is stated in the router and your specialists confirm this, to which this inadequate person answered me - this is not our router, but from the Sercom company, contact them.
I objected - the router was created by order of Beeline and sold under the Beeline brand - from Beeline, it immediately became a non-Beeline router, to which they simply dropped the call.
A call to Moscow Sercom yielded nothing: if the piece of hardware is short, ask the customer.
Time passed, my daughter was born in December 2014, in 2016 I also called unsuccessfully, to which I received an answer like wait for the firmware, the firmware is not written so quickly, well, probably just another programmer was not born) I should have already had a son, then in my head and the thought came up that he would inherit the router, maybe they’ll write the firmware by this time.
In July 2018, firmware 2.0.19 finally appeared, I don’t know what they have already changed there, it seems they have already forgotten the promise to call back when the firmware comes out.
My knowledge grew in the field of it and hardware. And already in 2018, at the end of March and beginning of April, I looked askance at the Smart BOX Pro and wondered if the time had passed to open you up and do something good.
My hands were itching, but my sober mind said that knowledge was still not enough, until I came across a comment on Muska that said, “The Nand guys change and sew flash on a spy flash, and I asked for a link. And how it turned out...
After talking with people on the forum, I came to an understanding of how to change nand to spi memory.

Oh man - that you wanted to remake the router -
The rest is one way, be careful!
Remember, everything is presented as is, and there is a big risk of not reaching the end if you break your equipment, then only you are to blame! In general, “The road can be mastered by those who walk!”
Given:
Smart box pro router - 1 piece
Straight arms - 1 pair
Soldering iron - 1 piece
Flash memory W25Q128FVSIG 1 piece
Bright heads - Legion :)
Not required, but recommended to have:
1) Soldering Hair Dryer or Wood/Rose-Friends Alloy with or without a programmer!

Action plan:
1) Make a backup of calibrations and firmware. (important and mandatory, do not proceed to step 2 until you make a backup)
2) Disassembly and re-soldering: resistor chip / flash / nand desoldering
3) Assembling firmware from the Prometheus project: yes, it is there!
4) Return of native calibrations.
Stage 2 can be completed last, depending on what is more convenient for you, but I prefer it 2)

Let's go: Stage 1

1) We connect to the smart box pro - super user login SuperUser, the password will be Beeline$martB0x or SFXXXXXXXXXX where ХХХХ is the serial number of the device on the back of the router on the sticker or in the router menu under regular user. We rewrite the Mac addresses of Lan and Wifi will come in handy.
We thank “Mad Geek” for the information that he began to remake a simple smart box (another model), but unfortunately did not reach the finished result.
Having received super user rights, we open access via SSH and connect PuTTY program, do not forget to insert a flash drive with the “FAT32” file system into the router
In PuTTY, after your login and password, enter the command “sh” (“”), no need to enter quotes!
then each line is a separate command, wait for it to complete
"
cd /mnt/shares/A
mkdir mtd_backup
cd mtd_backup
dd if=/dev/mtdblock0 of=mtd0
dd if=/dev/mtdblock1 of=mtd1
dd if=/dev/mtdblock2 of=mtd2
dd if=/dev/mtdblock3 of=mtd3
dd if=/dev/mtdblock4 of=mtd4
dd if=/dev/mtdblock5 of=mtd5
dd if=/dev/mtdblock6 of=mtd6
dd if=/dev/mtdblock7 of=mtd7
dd if=/dev/mtdblock8 of=mtd8
dd if=/dev/mtdblock9 of=mtd9

dd if=/dev/mtdblock11 of=mtd11
dd if=/dev/mtdblock12 of=mtd12
"
it should work approximately like this

collapse/expand

view@Smart Box Pro>sh

BusyBox v1.15.3 () built-in shell (ash)
Enter "help" for a list of built-in commands.

~ # cd /mnt/shares/A
/tmp/mnt/shares/A # mkdir mtd_backup

dd if=/dev/mtdblock1 of=mtd1
523264+0 records in
523264+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock1 of=mtd1
2048+0 records in
2048+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock2 of=mtd2
2048+0 records in
2048+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock3 of=mtd3
40960+0 records in
40960+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock4 of=mtd4
2048+0 records in
2048+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock5 of=mtd5
8192+0 records in
8192+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock6 of=mtd6
8192+0 records in
8192+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock7 of=mtd7
dd if=/dev/mtdblock8 of=mtd8
61440+0 records in
61440+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock8 of=mtd8
dd if=/dev/mtdblock9 of=mtd9
61440+0 records in
61440+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock9 of=mtd9
dd if=/dev/mtdblock10 of=mtd10
102400+0 records in
102400+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock10 of=mtd10
102400+0 records in
102400+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock11 of=mtd11
122880+0 records in
122880+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock12 of=mtd12
2048+0 records in
2048+0 records out
/tmp/mnt/shares/A # dd if=/dev/mtdblock0 of=mtd0
523264+0 records in
523264+0 records out
/tmp/mnt/shares/A #

In the root of the flash drive or the “mtd_backup” folder, files called mtd(X) X should appear - numbers from 0 to 12.
Remove the USB flash drive from the router and save a copy of the firmware in a safe place.

2) We order in advance a 16 MB flash drive W25Q128FVSIG, with the help of the ch341 programmer you can also order it or flash it (For flashing, use the “Calibri” software or an analogue)
Stage 2A) open the router. Unscrew one screw (closed with a decorative plug), apply a little pressure along the edges and the router case is disconnected, free the board, unscrew 3 screws - at the same time figuring out what we have in the bins and what to put on the processor as a heatsink.
Stage 2B) The most dangerous stage, so we have a board in front of us and in order to boot from the spi flash we need to resolder 2 resistors, resistors from position R136 -> to R145 and R156 -> 157, in total - 2 small resistors near the same others! We take a soldering iron, set the tip type K - the soldering iron is at a temperature of 300 degrees since it is lead-free soldering, a little solder flux for quick bonding, rattle / unsolder / find the desired pad and solder. Next, we solder our 8-legged flash drive to position U8.

Where is this on the board?

Everything is fine? Didn’t they unsolder anything unnecessary, didn’t they kill the board with static? -NO!
Stage 2B) The spi and nand flash tracks intersect, we need to remove the nand memory. It's simple: apply a little flux, take soldering iron-(on mine the temperature is about 360 degrees) heat it up, deflate/raise the chip!

Where is she located?

Wait - what hair dryer? no hairdryer! It doesn’t matter, let’s go to the radio market (or to our bins), buy a wood/rose alloy, take a couple of flakes, tin them on both sides, generously on the legs of the flash. Melted? we lift it up, clean the tracks from the alloy, and where we soldered everything, clean it with alcohol?/well, or whatever you have at hand, I use galoshes (budget is a delicate matter)

A sign that you have done/soldered everything is unsoldered correctly and did not kill anything, you can check something like this: press and hold on the router bottom of the board reset button and turn it on, the LED will start blinking in a different rhythm, indicating that it is in recovery mode.

Resoldered and almost ready

But it is not exactly

Congratulations, you have reached the third stage)
Stage 3) We are not assembling the router yet, but why? - What if it was soldered crookedly, the flash turned out to be a bit?
We connect the wire to lan 2 or any one you like, but not wan. Download ASUS utility Firmware Restoration version 2.0.0.0 change ip to network card 192.168.1.2 mask 255.255.255.0.
We launch the utility and indicate the firmware to it, on the router we press bottom of the board reset button and turn it on, in Firmware Restoration click download, it will see the router and flash it!
We return the settings on the PC network card.
Got it? Yes, let's go to stage 4!
-NO?
-I don’t know - doesn’t sew - and doesn’t see everything.
No problem! Take a flash drive with the file system "Fat32" Copy the firmware to the root of the flash drive, rename it to "root_uImage" without ().Insert it into the router and press it bottom of the board reset button and turn it on, hold the reset until the lights on the router blink quickly, about 5-8 seconds as soon as the blinking stops. Wifi appears Asus network? Congratulations!
Now let's put everything back together! We install a heatsink on the processor and drill into the case

holes for air circulation

Or maybe we even install a cooler from Vidyakha or even print new building on a 3D printer. Yeah, I was daydreaming :), but a radiator with ventilation is needed since the MT7621AT is hot and can burn out at work)

Ahhhh where can I get the firmware?
-You'll have to assemble it yourself!
Thanks to me and the good people in the project in the project. The line Sercom has appeared in the linaro repository - and you can select it - then smartbox. We are assembling our own firmware.
The buttons on the router are caught, the reset will be restored, the mode switch will switch modes, the wps button will work as you indicate in the menu! - HAPPINNES EXISTS!
Respect Padavana's work, do not distribute it ready-made assemblies firmware May the one who walks master the road)
It seems like we all won? - NO!

Stage 4 - Final!

Remember stage one? We take our dump, namely mtd2.
We are interested in the first 64KB!!! Cut with Vinex/

About Winnex

open our mtd2 dump in it, click Edit / there / define block / in the window that appears, the beginning is 0 and type in the second line “FFFF” (”) without quotes, click ok, immediately click / Edit / there / copy blok or copy the block, depending from whom it is written in the menu / select in / new file, save it.
In the saved dump we drive our poppies at offset addresses 0x4 for a 2.4 hertz network and 0x8004 for a 5 hertz network.
Give a name for example ibykota.bin, the file size will be 64KB

We copy our calibrations to the router - I used winscp, copy it to /tmp on the router and issue the command in PuTTY
" mtd_write write /tmp/ibykota.bin Factory " without ()
We receive our calibrated poppies from the factory!
then give the command “Reboot”
Is step 4 required? it works?
-yes, it is required, since the bootloader is assembled with corrected other calibrations, which should not be in the bootloader, it is not complete and most likely the 5GHz Wi-Fi will not start.
- Why then did you assemble a loader with calibrations?
-The bootloader with calibrations is assembled in order to reduce the hassle with the programmer, Winex, TTL adapter, because with a clean bootloader the firmware will not start.

- Am I doing well now? - if you received a working router, you returned your calibrations - YES!

If all is well, it will look something like this:

Having loaded the router with six torrent downloads, the load on the cpu increased to 23-27%. Copying from a computer to a 15 GB movie disk showed 20-30-40 MB/s at peak, file system ext4 disk.
The CPU load at the time of file copying also remained around 27% when the service was enabled online viewing screwed usb web cameras(0.3 mpx 640x480) the load at the time of copying rose to 34%. iperf3 tests showed a pure etheret speed of 930mbit/s at peak and an average of 910mbit/s. It is necessary to take into account that the router is in access point mode, the head one is mikrotik rb3011.

Result: From powerful router with bad software, we made a candy that makes our lives happy with a VPN, a torrent downloader, a print server, with 2 USB ports, a powerful processor, large RAM, gigabit ports and the ability to install additional packages from the repository.

Thanks: Padavan for the firmware, Freize for the Prometheus project, linaro for adding a smart box pro to his repository, and another gray cardinal who decided to stay in the shadows - he helped me in adapting the firmware and bootloader. Well, I have mastered this road for everyone. I give (+) kudos to their karma and budget!
I would like to express my special thanks to the store for providing the tool; only its mention in this review prompted my laziness to write this review, having honestly worked on it. Use good tool for work, I soldered with it, because straight hands and a good tool, a couple of bright minds, 90% success in business! - and 10% what? - This is luck, in April 2018, while searching for resistor chips on the board, I killed this router to the point of brick, and only a month later, when I received the soldering iron, it came back to life. The soldering iron itself was inspected on the muska - up and down, so I don’t see the point of inspecting it nakedly. I can say that if you decide to go into amateur radio or switch from EPSN or switch from Hakko 900, this is what you need! It is as convenient as an EPSN soldering iron, there is no input lag as with Hakko, and it has all its advantages. This whole alteration is a coincidence; if they had rolled out the striped, more or less promised normal firmware, this post would never have existed!

Have you finished reading? Do you have such a router, but your hands are not from there? -Think...
Good luck to everyone!

Add to favorites Liked +68 +112

Connect the cable that our installers installed in your apartment to the WAN port, and connect your computer to any of the LAN ports. You can also connect your PC to the router wirelessly, but it is better to use a cable at the initial setup stage.

Step 1

Connect the network cable of your computer to any of the 4 LAN ports of the router. The cable that our installers pulled into your apartment must be connected to the “WAN” port.

Step 2

Open your browser and enter 192.168.1.1 in the address bar. You will be taken to a welcome page. Click Continue.

Step 3

The router will prompt you to enter your username and password. Enter admin in the first field, and admin in the second. Click Continue.

Step 4

You will be taken to the main menu of the router. Select Quick Setup.

Step 5

You will be taken to the router quick setup page. It consists of four sections, let's look at the purpose of each of them:
- “Home Internet” - in this section you configure the connection to the Beeline network. All configuration data necessary for connection is already contained in the router’s memory; you just need to enter your username and password in the appropriate fields.
- “Wi-Fi network of the router” - here you can configure the wireless network of your router. In the Network name field, enter the name of your network, for example my_wifi, and in the Password field, enter the password to access it. Please note that the password must contain at least 8 characters.
- “Guest Wi-Fi network” - here you can configure the guest wireless network of your router.
- Beeline TV - if you have activated the Beeline TV service, you need to select the router port to which you will connect the set-top box. If you view over-the-air channels on your computer or using an Xbox 360 console, then you don't need to configure anything.
To save the settings you entered, click the Save button.

Step 6

As soon as the router establishes a connection, you will see “Internet connected” opposite the Status line. Congratulations, you have fully configured your router to work on the Beeline network.

Be careful when following the instructions in this section. In case of an error in the actions, a visit to the service center will be required to restore the device.

Step 1

Download the firmware. Current firmware version - 2.0.37 (14.7 MB)

Step 2

In your browser, open the page at 192.168.1.1.

Step 3

In the window that opens, enter the username admin and password admin.

Step 4

Click the Continue button.

Step 5

Click on the "Advanced Settings" button.

Step 6

In the top menu, select “Others”.

Step 7

A page with the basic settings of the router will open. In the left menu, select “Software Update”.

Click the "Select File" button and specify the location of the firmware file that you downloaded earlier.

Step 8

After that, click the “Perform update” button

Step 9

Wait while the router performs a firmware update, this process takes approximately 5 minutes, after which the router must be rebooted and it will be ready to use.

Use a hard reset if you need to configure the device again (delete all user settings), there is no access to the web page of the router settings interface, after setting up the router, the Internet connection was not established or the access password was lost.

Attention! When performing a hard reset, all user settings will be reset to factory settings!

To reset the router settings to factory settings, follow these steps:
Turn on the router's power and wait until the device boots up completely. Press the RESET, RESTORE button using a pointed thin object (such as a paper clip) for 30 seconds, then release the button.
After this, the router will reboot with default settings (factory settings) and will need to be configured again.