Automatic reboot of the router. Reboot from Windows. Extreme methods of rebooting

Often, in such complex equipment as a router, some internal software errors occur. As a result, the device simply stops working normally - it does not “distribute” the Internet or simply does not allow you to connect to it. Such a difficult situation can be resolved in various ways. One of the simplest is reboot.

Reboot options

Run RestartrouterD—LinkDIR615 can be done in two ways:

Program

Many don't have much experienced users causing problems such as rebooting D-Link router DIR 615. This operation is extremely simple, it does not require any special skills or abilities from the person performing it.

The soft reset process is carried out as follows:

After this, the router is in automatic mode will reboot. It should be remembered that if you have previously configured or entered any parameters, they must be saved.

You can also do this in the “System” section by selecting “Saveand Restart” - save and restart. This operation will save all important data in volatile memory.

Video: setting up a router

Hardware

Performing a manual reboot is required in in case of emergency when for some reason you cannot use the web interface.

Implement this operation can be done in two ways:

At the back of the DIR 615 case there is a “Power” button. Using it, you can turn off the power supply to the device, even if the plug is inserted into a 220 (V) socket. After turning off the power, you need to press again this button. The device will turn on. This method restart is the fastest.

Sometimes it happens that the entered settings lead to serious software error during operation of the router. Moreover, these settings are saved in volatile memory and do not allow a restart programmatically because I can't log into the web interface. The manufacturer has provided similar situation. It is for this case that there is a special reset button to standard settings.

To perform this operation you will need a long thin object. For example, an awl or a ballpoint pen.

When something like this is available, proceed as follows:

take the device body in your hands and turn it towards you on the side where the LAN ports are located;
Find the button recessed into the plastic - press it and hold for 10 seconds.

After completing this operation, the device will reboot. This method has one drawback - all previously entered settings will be erased.

Restart D-Link DIR 615 is quite simple. But you should remember that not all methods allow you to save settings entered by the user.

Rebooting the router is a procedure that is performed in the most different situations. If you have any problems strange problems with the Internet, network or WiFi, then the first thing to do is reboot the router. In many cases this really helps. In this article we will look at several ways to reboot the router.

How to quickly reboot your router

The fastest and most commonly used way to reboot a router is a hard reboot. In order to perform a hard reset, just unplug the router from the outlet and plug it back in after a few seconds. After this, the router will boot and start working normally.

Of course, unplugging the router from the socket can negatively affect its lifespan. But, if you do not abuse this opportunity and reboot the router in this way only from time to time, then nothing bad will happen.

It should be noted that some router models have a special button to turn the device off and on. Most often it is located in the back of the case. If your router has such a button, then you can reboot using it. Reboot using special button will be more gentle on equipment.

But, when using the button, it is very important not to confuse the on/off button with the factory reset button. Typically, the reset button to factory settings (or reset) is labeled “RESET” on the router, while the power button should be called “On/Off.”

If you confuse these buttons, this may result in all router settings being returned to factory settings. standard settings. This means you will have to configure the router again.

How to reboot the router from the web interface

Rebooting the router from the web interface or soft reboot is the second most popular and easiest way to reboot the router. In order to perform a soft reboot, you need to go into the router settings (enter the web interface) and find the reboot function there. This reboot method is especially convenient because it can be performed without leaving your workplace.

So, first you need to go into the router settings. To do this, open any web browser and enter 192.168.0.1 or 192.168.1 into the address bar. After entering the IP address, you need to enter the username and password, and then click on the “Ok” button.

If the username and password are correct, the router’s web interface will open in front of you. Here you need to carefully study everything and find the reboot function. Usually this function is in plain sight and quite easy to find. For example, on ASUS routers, the reload button is at the top of the page.

On other routers, the reboot button may be located in a different location. For example, in order to perform a soft reboot on a TP-LINK router, you need to open the “System Tools – Reboot” settings section, and then click on the “Reboot” button.

In any case, finding the reset button is always very easy.

Rebooting the router via Telnet

Rebooting the router via Telnet is quite easy the hard way reboot, which is used in specific situations. In order to use this reboot method, you will need a Telnet client program. There are quite a lot of such programs and you can choose any one you like. In this article we will demonstrate how a reboot is performed using an example free program.

After launch Putty programs A window for setting up a Telnet connection appears on the screen. In this window you need to enter the router address (in our case it is 192.168.1.1) and select a method Telnet connections. After this, you need to click on the “Open” button, which is located at the bottom of the settings window.

After clicking on the “Open” button, a text interface will appear on the screen (a window similar to a command Windows string). With the help of this text interface you can control the router.

First you need to enter your username and password to gain access. After entering this data, you can enter commands to control the router.

In order to send the router to reboot, you need to enter the “reboot” command and press the enter button.

Rebooting the router may be necessary in several cases, but the most common is when the router is frozen. Another reason - Bad Internet, low speed. It is worth noting that turning the device off and on again is not a solution to the problem, especially if we're talking about about freezing. The difficulty is that the device's firmware has crashed, so a restart is definitely needed.

To reboot the router, you need to use universal instructions. The process in case of different models is no different - manufacturers develop products according to the same principle.

Quick method

The simplest and quick way reboot - click on the corresponding button. Not all routers have it, but most have it. The button is designated as follows:

POWER or On/Off

It is located close to the connection connectors on the rear panel of the device. Try pressing the button once. Look at indicator lights. If nothing has changed, press again - twice or simply hold down the button. The blinking of the lamps will change, which will characterize the current reboot state.

There is one caveat. When you press a button, you should not expect that the restart will take place immediately. First, the process of turning off the device begins, then, after about a minute, you can press it again, and then the router will turn on. This is the easiest way to restart the network.

If there is a Reset symbol on the back panel of the router, you do not need to press it twice. In new models, a lever may be introduced instead of a button, Touchpad, a small bulge under which the reboot indicator is located.

The Reset button completely resets the settings. If your router previously worked on certain parameters, they need to be entered again. Many modern models do not imply such a need - they are equipped with a function smart settings, when the reset only affects the operation of the firmware, and not the change in data in the system.

Attention! To avoid resetting the settings, hold down the reset or power button for no longer than two seconds. In the case of many models, this saves the need for reconfiguration.

If Wi-Fi is lost, a good option would be to turn off the router from the network. You just need to unplug the plug from the outlet and wait about 10 seconds, then connect again. The Internet should appear if the problem was only a frozen router.

It is better not to practice the latter often. Emergency shutdown does not count safe method restoring the operation of the router - it may gradually break down.

Working through the interface

You can reboot remotely. For this you only need a computer; You can also perform actions on a laptop. Direct wired connection- not necessary. You can even access it from a smartphone.

By the way, insisting and rebooting the device via the web interface is completely safe. The disadvantage of this method is that you need certain knowledge to do everything correctly. If there is no knowledge and understanding of the structure of the window with settings (and sometimes skills in working with English language), the instructions will come in handy. Different types firmware and in general software offer different settings. Therefore find required tabs and the points are sometimes difficult.

The TP link is configured like this:

go to the browser;
V address bar enter required text(usually 192.168.1.1, but for some models the address 192.168.0.1 is relevant, and if both options do not work, find the manual for the router in the box or on the Internet and get this information);
search for the reset button (it can be located in different places, sometimes called Reset, Reboot, contained in the section “Router Status”, “System Tools”, etc.)

If you answer the question of how to properly restart, then you can safely identify this particular method. It is safe, but may take some time (at least the first time).

Command line

If your router supports the appropriate protocol, you can use the command line Telnet line. You can find out more about the possibility of working with it in the instructions, both in the one included in the box and in the online version found on the Internet.

When using the function, you need to enter the router address. Typically, as noted above, this is 192.168.1.1. Here, either the connection will be ensured, or the system will indicate that the operation cannot be performed.

If successful, you need to log in to the system by entering your username and password. We enter the command Reboot, Restart or Reload (one of them, and if it doesn’t work, try another), after which the device will restart and Wifi will work.

Where can I get Telnet? Program ( command line) is installed in Windows 10 and older versions, but it is not yet available in Windows 7 and 8. There are two options - you can install or download another software called Putty. Another analogue is Kitty. The workflow is similar - you need to open the window and enter the address in the appropriate field. Automatic reboot will begin after selecting the Open function and entering the user name and password. Last step– type Reboot, Restart or Reload.

The Beeline and Rostelecom providers usually have stable Internet, but there are glitches. Restarting the router solves the main problem - poor connection, low speed or no connection at all. Unplugging the router from the outlet is as easy as shelling pears, but it will be better to preserve the functionality of the equipment if you find the reset button and use it.

For more details, see the video:

Working with commands and logging into the router settings, even if this is done remotely, is a priority. The main requirement is the ability to connect to the device, that is, to be at a distance from it. optimal distance allowing you to maintain communication.

We have looked at the main methods of rebooting - this is where we end the article. If you have tried all of the above methods, it is likely that your router is broken or the connection is interrupted due to a reason beyond your control (the provider has an outage).

It sounds paradoxical, but a router is a type of device that is rarely equipped by manufacturers with a power button. No wonder, because routers today are practically never turned off, and, therefore, are not rebooted by their users.

By the way, routers are not equipped with a special, previously specified key, we can cite as an example the router from Asus with model name RT-N13U-B1.

It would seem, indeed, why include a feature in the functionality of the equipment that no one will use, however, not everything is so smooth. Sometimes, users encounter such network problems: like freezing of Internet resources, including various web pages.

In this case, as a rule, rebooting the router should have a beneficial effect on the problem that has arisen and then eliminate it. Typically, such difficulties arise among owners and users of routers from a low price category.

Difficulties may primarily be associated with various malfunctions of your router, so rebooting it is intended to reset all violations in work activity apparatus.

In this article we will look at how to reboot wifi router, including remotely.

Method number 1: the easiest way to reboot the router

So, the first way to reboot devices is the simplest. To implement it, your device must be equipped with a “Power” button. On many ADSL modems specified button has the name “On/Off”. As a rule, such a button has a convex shape, is pleasant to the touch and is not difficult to find.

The first press when the device was previously turned on will cause it to be disconnected from the electricity network, and a second press will restart its operation. Some manufacturers provide information on their official websites that you must wait 20 to 30 seconds after turning off the router and before turning it on.

However, this expectation is unlikely to have any unambiguous explanation. In any case, it is the manufacturer who knows his product and its structure best.

Most router manufacturers believe that the equipment used to access the Internet is intended for constant work activities, and that is why they do not install such an important power button.

If your router is not equipped with a power key, then answering the question of how to reboot wifi router , you should find the wire through which the router receives the necessary electrical energy, and then find its power supply and unplug it from the outlet, if possible, also for 20-30 seconds. The method is very ordinary, however, it has one drawback.

The disadvantage is that on a considerable number of devices, having carried out its configuration, it is necessary to forcibly save it. If the specified actions are not implemented, then after turning on the device again, the user risks receiving an unconfigured device that must be reconnected to the network.

For example, reset of settings is detected on:

Tp-Link TL-WR741ND;
TP-LINK TL-WR1045ND;
TP-LINK TL-WR841N.

Method number 2: reboot the device remotely

From a router hardware point of view this method It is the most the best option reboot. It should also be taken into account that specified method will take the user much more time than the previous one, but it’s worth it. The method is effective and relevant also because it is the only one in the case when the user does not have direct access to the router (to the shutdown button or to the outlet). Having answered the question, how to reboot a router remotely, you can by reading the second and third reboot techniques.

To begin the reboot, you must enter the router parameters by logging into the web interface of its settings. This is done by prescribing in search bar browser standard address 192.168.1.1. After entering specified address Press the “Enter” button, which is located on your keyboard.

Typically, manufacturers place the reset button directly on the home page web interface of the router parameters, such manufacturers include:

Asus;
D-Link;
Zyxel and others.

Some include a reboot function in a specific section. On TP-Link you should go to the “system tools” section, on NETGEAR to “router status”.

Method number 3: reboot via protocol

You can also reboot the router through a special protocol called telnet. Using the launcher search engine, enter “telnet (desired IP address).” Next, the user needs to undergo authorization by entering a login and password. After this action, enter “Restart” in the window that appears. Done, your router is now rebooted.

Thus, in this article we have examined quite extensively the how to reboot the routertp link, asus, d-link and others.

TP-Link produces inexpensive routers for home and office use, but they are sometimes unstable. Fortunately, it often saves you from many problems simple reboot router. But how can I do this correctly on routers from this company?

About available methods

Many routers can be rebooted in three ways at once. Let's look at all the available options.

Option 1: Turn off and on again

It helps a lot to solve some problems, but frequently rebooting the router in this way is strictly not recommended, as this has a bad effect on the life and quality of service.

To reboot, use the power button. You can also simply abruptly turn off the power (unplug the router from the outlet), but this method is not recommended at all, as this can lead to voltage surges, which in turn will lead to breakdown.

Option 2: Using a dedicated button

Many routers have a built-in reset button. It is indicated by an icon with two arrows or the caption “Restart”. It is recommended to use this reboot option.

Option 3: Reboot from your personal account

This method is perfect in cases where the router does not have a special reset button, and using the first method is dangerous for the operation of the router.

The reboot instructions look more complicated:

1. Go to your personal account. To do this, log into your personal account. Initially, open any browser and type in the address bar: 192.168.0.1
2. A login window will pop up. Enter your details. The login and password can be found in the documents from the provider, or requested from him. According to the standard, the login and password are: admin
3. IN personal account open the thread "System Tools"(located in the left menu) and find the item there.

As you can see, there is nothing difficult about rebooting the router from TP-Link.